I'm running XP pro and would like to know if I can use a Win 7 pro upgrade DVD to make a dual boot system.
I would not be keeping it that way for long but I'm not happy going completely over to Win 7 in one go
I have a dual boot scenario currently on an Intel 80GB SSD, with one partition as XP Pro, and the other is Windows 7, split 20GB(XP)/50GB(7).
The XP partition needs to be upgraded to Windows 7 for my wife's work remote access, and it will also include Office 2010 Pro.
Will I run into any issues dual booting into the existing Windows 7 partition after the upgrade, or should I just reinstall our personal Windows 7 OS after the upgrade is installed?
I have other hard drives to use as well if space becomes an issue, but I'd like to keep the existing Windows 7 install without starting from scratch.
I would like to install 7022 onto my hard drive. Problem is i am unsure how to proceed because on another internal hard drive i have ubuntu installed. Now both OS are installed to different hard drives yet ubuntu has its boot manager installed and this gives me the option of booting either 7 or linux.
Im just looking for some guidance as i do not want to screw over the boot manager performing an upgrade.
I have also taken a full TI image of the computer just incase.
I have a netbook running on N280 Atom with 2 GB of Ram and 2 partitioned drives at 72 GB each.
I have XP home edition installed on the C: drive and want to install Win 7 on the D: drive in order to dual boot.
The problem is that I have a Win 7 professional "upgrade" disk.
My question is: If I already have XP installed on the C: drive, will I have a problem (or is there any cons) with attempting to install Win 7 to the blank D: drive being that it's just an "upgrade" disk as opposed to a full OS disk?
Should I even try to do this?
The reason I'm even thinking of attempting this is because I get a super discount on the upgrade being that I am an adult atending a university. You cannot beat the student discount of $29.99 for Win 7 professional.
I don't want to shell out $200 for the full disk unless I absolutely have to...
I screwed up and ordered Windows 7 Pro before I realized I couldn't do an upgrade from Vista Home Premium. I really don't want to resintall all my programs. So I'm thinking about installing a new drive, and doing a dual boot setup with Windows 7 on the new "D" drive. Question is, can I do this with an upgrade version of Windows 7, or do I need the full version?
View 8 Replies View RelatedWell i am currently running Vista Home Premium sp2 and Windows 7 Ultimate (build 7100) in a dual boot config for about 2-3months and loving it. I was wondering if i could upgrade my Windows 7 install to RTM without affecting my Vista install? Do you get a choice which OS you want to upgrade or does it go by what OS you load the upgrade disc from?
View 5 Replies View RelatedMy boot drive is a 120Gb Samsung spinpoint, previously one whole partition containing XP. This XP wasnt a clean install, it was an upgrade to Windows 98 I think, and this may be the problem. I have a number of other hard disks, 1 PATA and 2 SATA, which I am using for video editing stuff.
I downloaded GParted, shrunk the XP partition to 76Gb and created a new 35Gb partition for Windows 7. A bit small, but I figured once everything was tested out, I could grow out the Windows 7 partition.
This was successful, and I inserted the Windows 7 disk...selected custom install, and installed to my newly created partition.
Windows 7 did its reboots and I filled in the usual bunff to create basic accounts, etc.
Then I rebooted, and was a bit surprised I did not get the dual-boot menu, it went straight into Windows 7. Using F5 and F8 did not provide any further options, specifically the 'Previous version of Windows' one.
Going into Windows 7 Disk manager, i could see the partition was still there. I read other posts of what Windows 7 does (belately) and yes, it had 'hidden' the XP partition. I gave it a drive letter (D, but Windows 7 saw it as an empty disk!
I downloaded EasyBCD, and it showed only one entry in the bootloader. I tried to add a new entry, using type:"Windows NT/2k/XP/2k3", but the Drive was greyed out; if I selected "Vista/Longhorn" I could then change the drive to D: and then change type back to XP (odd). I then clicked 'Add Entry', but it came back with an error message "EasyBCD could not locate a copy of NTLDR on your hard drive. Please download a copy of NTLDR and NTDETECT.COM from Htpp://(blah blah) and copy them to the drive D: in order for your newly-created entry to work.".
Does this mean my XP partition is truly trashed? Is there a way to get back my XP partition?
I am thinking of maybe inserting the XP disk and repairing, maybe it will detect XP and fix it, but if it will blow away both my installations, I might not bother.
Last resort is to use File Scavenger on the dead partition, but when I checked it out in GParted again just now, it said that 3Gb out of the 76Gb had data, could it be that Windows 7 has just not recognised my original XP partition as an XP partition, thought it was its configuration partition, and just overwrote stuff?
I currently have Vista Ultimate x64 and Windows 7 RC1 x64 running in a dual boot setup. Each OS is installed on a separate disk drive. If I preorder Windows 7 Professional upgrade ($99) will I be able to do a clean install on a partition of my choice or will it force me to clean install over my existing Vista Ultimate partition ?? I understand that I cant do an upgrade in place from Vista Ultimate to Windows 7 Professional. My question is will the preorder Windows 7 upgrade force to me "kill" my Vista Ultimate partition ?
View 1 Replies View RelatedI have a PC with XP Home and wish to upgrade it to Win 7-64. I purchased the Win 7 upgrade version. Will ditch XP when happy with getting programs installed in Win 7.I also have a new drive that I wish to do the install of Win 7.My plan is to hookup new drive, place Win 7 DVD in drive and run the install in Custom mode. This should install Win 7 on new drive and preserve Win XP on the old drive.To register Win 7, I have the serial info from the Win XP system and will insert when asked. I'm concerned about whether this method to register will work correctly as I was told that Win 7 must find a windows.old file on the installation drive. Will it work OK?
View 7 Replies View Relatedi have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies View Relateddual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies View RelatedAs currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies View RelatedI have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies View RelatedI installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies View RelatedI can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies View RelatedHow to Change the OS Name in Windows Boot Manager ?
View 0 Replies View RelatedI have installed a year before UBUNTU on my pc with dual boot (i.e. use either window 7 or ubuntu).the NTFS partition that contains the UBUNTU was corrupted and i wanted to take the dual boot from my PC. I used the instructions from the web site: http://www.makeuseof.com/tag/how-to-...t-environment/but the disk management tool would not let me delete the NTFS partition.Could any one help me delete the NTFS partition and use just windows 7 as the only boot. step by step help would be great.
View 8 Replies View RelatedI got windows 7 running fine for a while now and ever since my XP did not boot anymore.I was not worried to much about it since i did not need it at the time.But now i really REALY need it,See i got all my Cubase projects in there and my cubase plug-ins al setup in XP and i need to get to the projects?At first it did not do anything and using easyBCD did not help either.I cpoied ntldr and detect to the root of C: wich contains my XP and now it shows the bootscreen but hangs on a black screen.The thing is right before the bootscreen shows i see the text" invalid boot.ini" flashing by very quick.I am able to enter that winXP install in safe mode and i tried safe/vga mode as well wich works but thats all.
View 9 Replies View RelatedI have a laptop I bought a year ago on which a created a dual boot Win 7 (32bit)/Win XP SP3 install, each on a separate partition. It was my first Win 7/XP dual boot install, and my first personal system that I allowed to have a Win 7 install on it at all, so although I have plenty of experience working on pretty much every previous version of Windows, I have very little experience with Win 7 and dual boot configs.
Today about 2 hours ago my audio spontaneously stopped worked for no good reason, so after shutting down each program to see if that cured it (which it didn't), I restarted the system. Out of the blue, for the first time I've ever experienced it, I received the msg "MBR Error 1" - Press any key to boot from floppy. I don't have a floppy of course on my laptop, and if I press any key I simply get the same msg. I turned the system off for a few minutes to make sure it was a good cold boot, but every time I still get the same msg. I tried switching the BIOS setting from IDE to AHCI (IDE is required for XP to boot, AHCI required for Win 7), but I still get the same error msg before I'm even prompted with the OS boot selection, so it made no difference of course.
I looked up this issue and found various suggestions, but none of the ones I found took into consideration a dual boot config., they were all Win 7 specific solutions. I don't what to try and repair the MBR only to have it screw up my dual boot config and be unable to access XP, which is what I use almost exclusively, nor do i want to lose access to Win 7 if at all possible.
I had a backup HD of my complete system that I saved several months ago when I upgraded my HD, and I periodically refresh the most important files on it, so I'm currently running on the laptop in question using my old HD, and it's working just fine. Worst case I can just clone my old HD to my newer HD that's screwed up, but I'll still lose a lot of changes I've made to the OS since I upgraded the HD and have to reinstall and config a number of programs, so that's my last option. I'll also have to back up about 200GB of data from the newer HD which is much larger than my old HD, and then restore it back after the clone, something that will take a lot of time and unncessary effort if I can just fix the MBR.
I had Win XP on 1 HDD & installed Win 7 on a different HDD. I think I accidentally did a dual boot install because Win 7 won't boot without the the XP disk connected to the motherboard.
That was fine until my XP drive died yesterday. Now Win 7 won't boot. The first time I tried to repair, Win 7 was not even seen. so I booted into diskpart and made the partition active. Now it could be seen as an OS.
Then I did a startup repair. It did whatever it does & when it was finished I restarted the pc but it didn't boot I went back to diskpart and confirmed the partition was active. I went back startup repair and tried again.
This time it said it could not detect a problem, but it still will not boot. What else can I do? My pc is homebuilt. Right now I have the 1 sata drive, 2.53 ghz cpu, 4gb ram, onboard video & sound
I have Win XP 32 bit on my old drive. I buy Win 7 full retail and a new HD. I set bios to boot from cd etc. Win 7 starts up. It shows the 2 drives, so I select new drive...no problems. It starts install. I leave it to do its stuff.When I come back its up and all ok.I dint get any option to boot from XP. The drive was listed as "SYSTEM" but not old Windows or anything.
Also ASUS chipset drivers dont work and they were listed as 7 drivers.I tried Vista drivers but it normally shuts down and restarts. Nothing.
I installed Windows 7 32bt profesional on the D: partition on an XP machine (C. Dual boot worked fine, but since I had to reinstall XP I have lost the option to change partitions at boot.I want XP to be the default but with Win 7 to an option at boot.My boot.ini is currently:[CODE]
View 4 Replies View RelatedI have XP (x86) installed on one partition.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
I would like to upgrade my memory. I have a hp pavilion 6617c with dual channel ram. Can i use this : Patriot PSD34G13332 Signature 4GB PC10600 DDR3 Desktop Memory Upgrade - 1333MHz, 1x4096MB, CL9, Non-ECC, Unbuffered at TigerDirect? Is there any difference?
View 5 Replies View RelatedI was having win 7 RTM and i tried to installl OSx86 in second hard disk
after few failure i successfully installed OSx86 in my secondary had disk now the problem is that i cant boot win 7
i changed boot order i tried windows 7 disk repair
but both failed
im getting some Boot mldr missing...
Actually even OSx86 is not booting i get OSx86 boot screen with two hard disk to select if i select windows disk it still says the same Boot mldr missing.
I setup an XP/Windows 7 dual boot on two drives. Currently C: Windows 7, D:XP
Love Windows 7 and now I'm ready to convert to single boot Windows 7.
I'm not real savy re. bcdedit so will need very detailed instructions
I did find the command line in Windows 7 by going through accessories but I'm scared to go further without help.
Eventually I want to clean up the D:xp and use it for storage etc.
I'm guessing this procedure may have already be written up but I can't seem to find it.
I wanted to dual boot Mac OS with my Windows 7 but everything I do it comes wrong, simply doesn't work. I tried dual boot with iatkos v1.0i, iatkos s3, iatkos v7 but still nothing.
View 3 Replies View Relatedi have a hard disk 500gb and i made three partitions.the 1st partition i installed windows 7 first.what i did today?i wanted to install windows xp to the 2nd partition.i installed and now that is the biggest problem.i cant in to windows 7 anymore.when i turn on my pc it has only windows xp.it hasnt dual boot to choose what operation system i want to in.so what to do?i want windows 7 and xp with dual boot to choose
View 9 Replies View RelatedI tried to make a dual boot with windows 7 and windows 8, but when I made a partition, the hard disk drive (C changed to dynamic.Can I still upgrade to windows 8?how can I convert it back to basic disk?I have windows 7.
View 2 Replies View RelatedVideo tutorial on how To Dual Boot Windows 7 ?
View 0 Replies View Related
