I just performed a complete re-installation of Windows 7 Ultimate x32 onto a friend's Acer Aspire 5920 which was previously running Windows Vista x32.
All was perfect until I installed a Java and a program that needed it. When I ran the Java dependent program, it came up with an error message stating that Java Runtime Environment was either missing or outdated. I then uninstalled Java and reinstalled directly from the Java website. However, on the verification screen after the installation, my Java was not detected and I was told that "Something is wrong. Java is not working."
I followed the troubleshooting instructions on the website and alas it still will not work/be detected.
I then went searching around online for answers and I ended up doing a clean boot in safemode. There I disabled all running services that were not from Microsoft. Then I revisited the Java site and it was able to detect it. However, after rebooting to normal windows Java still can not be detected even with not running the services I turned off in Safemode.
i tried boot my windows normally but it restart with an error and error was showed up for less than 1sec. but some how i was able to get picture of that and link is belowUntitled.pngAnd same error come up when i tried to boot in safemode and it restart again and take me to "windows startup repair" option.so i tried to repair with "windows startup repair" but after loading windows file it stuck with one cursor and windows7 loggin wallpaper and nothing comeupwith this wallpaper it stuck IMG_3140.JPGand again same thing happens when i tried to recover from my recovery disknow
i already installed my java 64 bit but still my psp emulator pops " the required version of java is not been installed.. anyway my java 64 bit version is 7.0.30.5.
I'm using java 7 latest version.I've installed the 32 version and am using windows 7 x64. Java is not working in any browser. I've uninstalled all browsers, reinstalled them, removed older versions of java and the current one and reinstalled it. I've also been into the Java settings to ensure Mozilla is enabled. I've also turned off all firewalls and virus software. Nothing is working and I'm out of ideas.When loading the java splash screen shows and it looks like it will load, but then it fails, always with a ClassNotFoundException.
Just got a new notebook and Java is installed (64 and 30 versions), but it is not working. I am using IE 9, Windows 7. I checked all settings in IE and they are correct. Web pages using Java do not load properly and I cannot install Mcafee software.
Firefox is my main browser-Have also tried Google Chrome and IE9OS is Win 7 x64 EnterpriseSome java buttons on websites just don't work. In any browser.... they didn't work in the previous versions before i updated both Firefox and Chrome.As far as security software that I'm using, I've tried disabling all of it, and still have the same issues. Those programs are: Spybot S&D, AVG Free, Comodo firewall.Here's a good example of a java thing on a site that won't work for me.Covers.com has a login / password thing in the top right corner of their main page. I punch in my name and password, and neither hitting enter nor clicking on the Login link do anything. But I am experiencing this type of issue on many other sites. I can get on my laptop and go to the same sites and I have no issues, so it's something to do with this OS. Unfortunately, my laptop charger was lost so that's not an option. Plus, I'd really like to be able to use my tower for everything I do on the web.
I have a Java app that runs just fine on Windows XP. However, on Windows 7 there is a problem related to a job being done via a Java thread. Background: The app spawns a separate job via a Java thread and continues on while the spawned job executes. In other words, 2 things happen at once.
Problem: On Windows 7, when the app spawns the job, Windows sits and waits for the spawned job to complete before it continues on. In other words, 2 things DO NOT happen at once. It's as if Java threading does not work in Windows 7.
i only ever use firefox, and would always keep it and other programs such as flash and java up to date. one day, some websites just quit working, like facebook, Internet, netflix, and various game sites. this problem continued for a few weeks, and i didn't do anything to try and problem solve it. then everything seemed to magically fix itself, so i figured that an automatic update had done the trick. however, a few months ago those problems started again and since then i have read many threads on how to fix them, uninstalled and reinstalled ff, java and flash countless times, including past versions of all of them. i even tried using ie and chrome, but i had the same problems with those browsers. as of right now, i cannot view flash based game sites (such as omgpop). i used to not be able to play games on facebook, but as of yesterday those suddenly work again. i cannot watch streaming videos on netflix, but Internet works fine. i cannot view content on many web pages (for example google images does not work at all, nor does googlemaps or mapquest). some pages only load partially even though it says they are 'done'. i often see 'javascript:void(0)' on websites. currently i am running the current versions of java and flash and ff 3.6. i have checked pop up blockers and script enabling and just about everything else. i am at a total loss of what to do. (even as i am typing this, i cannot click on any of the text editing tools or smilies and this is showing up as one big paragraph...)
i only ever use firefox, and would always keep it and other programs such as flash and java up to date. one day, some websites just quit working, like facebook, Internet, netflix, and various game sites. this problem continued for a few weeks, and i didn't do anything to try and problem solve it. then everything seemed to magically fix itself, so i figured that an automatic update had done the trick. however, a few months ago those problems started again and since then i have read many threads on how to fix them, uninstalled and reinstalled ff, java and flash countless times, including past versions of all of them. i even tried using ie and chrome, but i had the same problems with those browsers. as of right now, i cannot view flash based game sites (such as omgpop).i used to not be able to play games on facebook, but as of yesterday those suddenly work again. i cannot watch streaming videos on netflix, but Internet works fine.i cannot view content on many web pages (for example google images does not work at all, nor does googlemaps or mapquest). some pages only load partially even though it says they are 'done'. i often see 'javascript:void(0)' on websites.currently i am running the current versions of java and flash and ff 3.6. i have checked pop up blockers and script enabling and just about everything else.i am at a total loss of what to do. (even as i am typing this, i cannot click on any of the text editing tools or smilies and this is showing up as one big paragraph) i've tried pretty much everything i can think of, as to manual installation and so forth.nothing works, nor changes anything.
so far it's only facebook (of websites) not working, and then of course flash and java.i would like to avoid comments such as: "just don't use facebook then *hurhhurh*" as the problem runs somewhat deeper than just not being able to use facebook. this computer is just about 4 months old as well, and i'm breaking my skull trying to figure out what the heck is causing this. on a side note i am up to date on both anti-spyware and anti-virus, and i've run several scans in both secure and normal mode.all comes up empty.
Ok, I have looked everywhere and tried several "solutions" to get windows to recognize where Java.exe so it can run .jar files.I'm running windows 7 64-bit with java 1.6 32-bit installed. And when I try to install craftbukkit I only get errors.I have copied these errors so you can view them at...So I searched all over google and tried to go to my computer, advanced settings, path and add the path there but i still get the same errors.I've been all over the mine craft and bukkit forums but no one there can explain how to fix it
Error causes BSOD right after the windows logo. If attempting to boot into safemode, it just shows my mouse cursor and stays black. Nothing comes up.I have tried most of what I know what to try. I took my graphics card out (as someone on another forum suggested) and made sure the pins were all cleaned off. That did nothing. Since someone on another forum thought it was a graphics issue, my card is a GTX480 1536M GDDR5 384B Dual-DVI mHDMI (to be specific LOL)
mypc will only run in safemode; it gen wont get past the welcome screen if i try normally;nut if it does, none of the cons work, i want to do some stuff urgently, is there anywayi can lauch ome programmes whilein safe mode;
My laptop does not seem to boot into safe mode. I've been tapping F8, even though it says F8...system restore on the bottom left corner, it still won't boot. I tried this other method on advance recovery method and chose use system image created earlier - that and return to factory condition gave me an error saying "windows cannot restart the computer into the windows recovery environment." One method I haven't tried is using msconfig - in boot option. I'm worried about using this method..What if when I restart my laptop and it keeps loading to safe mode. I just did an sfc scan.I forgot what it said. It did found some corrupted files, and it repaired it. The reason why I want to use safe mode is to use this recovery disc - I notice that when I turn on my laptop, it takes quite a while to boot up. As a result, I also found that I have a problem with creating an system image. I want to use this repair disc, but I can't go into safe mode, so I can choose repair your computer.
I have loaded window 7 32bit a while back and so far it has been running great. Since then I had a virus and I try to boot into safemode but when I hit f8 it just has a white curser flashing. If I let it boot by itself its ok it starts into windows. So I try to go into safemode by just powering off my laptop in window so it would kick me into safemode. It put me to the option of chosing which safemode but it freezes while i move the arrows. I try to boot it from my repair cd, it boots but when it asks to hit any key to start the boot, it freezes. I then backed up all my files and reloaded window 7. Still the problem is still there. I tried everything that I could think of. I don't know if its in my registry or the os disc. I scan the registry and its good. My hard drive is new 500gb western ditgital. I have a toshiba laptop satelite a215-s5818.
I'm curious if there is a way to run a specific program when I choose to reboot into safemode with networking?
Specifically looking to run or make sure the service for Logmein starts. The work I have to do would be best done in safe mode, and of course connecting remotely would be great.
I actually selected Alternate Shell minimal safe mode and now I'm stuck in it.How do I get out of this and into regular Safe Mode (with a GUI)?Alternate Shell is all command line so please reply with actual cammands.
I was instructed to remove my antivirus software and reinstall it by avast. They said to run their tool in safe mode. Try to start computer in safe mode and it gets just so far and reboots. I set MSConfig to boot as safemode/minimal. Do that and restart. Endlessly restarts - safe mode will not load, it just gets so far and then reboot.My computer will not start now at all. Can not get a command prompt, safe mode, and could not do a restore for some unknown reason.
i installed LibUSB-Win32- drivers so i could use iRecovery on my iPhone,on completion of installation of LibUSB my keyboard and mouse turned off, well all of my USB was disabled. so i was forced to restart, sadly same thing, login screen no keyboard or mouse, i tried in safemode, same thing. however my keyboard works in CMOS and BIOS so i know its a OS issue. and this only happened when i installled LIBUSB, i looked it up and tried manually removing LibUSB using the Win7 setup disks command prompt. i deleted LibUSB0.sys out of Windows/Systen32/Drivers so that LibUSB wont be called upon during start up, however doing this has now meant my PC will reboot after loading Windows even in safemode, the Starting Windows screen appears. fades and riight before it goes to the login screen it restarts, Safemode too. i have no Restore points and i cannot and i mean Cannot Format this harddisk, its not backed up and i have over 400GB of data i absolutely NEED.Im so stuck its not funny i have no idea what to do to get windows booting again and without this silly LibUSB stuff! i dont have aany PS./2 Ports on my mobo either!, what can i do >? Please ive asked everywhere and no one knows what i can do except reformat.
i got a problem with Vista, a normal start causes a crash (+memdump), it only starts in safemode, how to repair it ? i have already ran the installation-disk several times.
whats a little bit mysterious is the fact that last time i used that Vista-partition it worked normally. i then copied all files to a new partition on another harddisk and i have since then used that partion instead.
i changed CPU 2 days ago, can that be the cause ? the computer is otherwise working OK, im running Windows 7 on a another partition.
I constantly bsod on reboot. Yesterday I took out my graphics card because i was selling it in an old computer. It was a ati 4770. I threw in an old xfx 8500 gt because my motherboard doesnt have an internal gfx. It ran for about an hour or so and then i started getting this BSOD. Not thinking I assummed it had something to do with the old card going bad. Today i went and bought a new one to through in and I am still receiveing the same issue.
my laptop looks like it has a massive problem. i have been on various forums for advice but unable to solve - this is the problem
* it turns on & I CAN get into advanced menus
* it will not repair itself no matter what
* it will not go into any other modes , safe Etc....therefore I cannot restore to factory settings etc....
* ive Tried all tricks such as F8, Alt & F11 etc..... to get into advanced menu settings - all lead to the black screen
* everything i click on enter leads to a black screen - only a white curser appears.
its as if there is no way of accessing the computer disc/ hard drive in anyway from boot up. there is clearly a hardware problem but i cannot access anything internal beyond ordinary & advanced menus i just keep being led to the black screen & no activity. the menus work & that is all.
I am trying to fix a friends labtop. I have been on the internet trying to find an answer but nothing works from answers on internet. When you turn the computer on it shows, Windows Error Recovery. Either Launch Startup Repair or Start Windows Normally. I use Launch Startup Repair and the screen goes blank after a couple of minutes the mouse comes up and can be moved but the screen stays blank. I have pushed buttons nothing has happened, it stays here, so I have to turn it off. It starts all over again. So I try Starting Windows Normally, it will just stay at the Starting Windows logo. It will stay here forever. The windows logo will fade with the color but it will stay here. I will then turn it off and try booting in Safemode. It starts with the drivers loading but then it freezes on Loaded:windowssystem32DRIVERSAtiPcie.sys. This is for all three of safemode options. I have tried all the other boots in the options and none of them work. They all will just freeze on starting windows or go to blank screen. So I tried to boot to Windows 7 CD. I put it in and nothing comes up. There is no Click on keys to boot from cd, but the cd does make noise like it is doing something. It will just be on a blank screen. I have also reset the bios to factory.
My Windows 7 64 bit machine will not boot. It keeps going into Windows System recovery mode. I have tried that multiple times and rebooted each time but no luck.System specs - Windows 7 64 bit, 16gb ram. Core i7-920 with 12 gb ram. This is an OEM disc that I bought from comp store, all parts and OS are less than three years old. C: drive - windows install a few apps, Drive 1 - games and music,
1) tried looking up this error with instructions. online instructions have had me go into the command prompt to perform edits on the c: windowsSystem32 folder. These do not come up in my prompt on my c: drive - where windows in installed. See program files etc, but no Windows32 folder. 2) already have run the c: chkdsk /r to try and fix the disc. It went through everything and comes back saying there are no problems. Still cannot boot to windows either get BSOD mentioned above or recovery mode. 3) Cannot go to previous restored state (one of the choices ) as it states that I have no restore points although I know that I have established at least 2 in the last 2-3 months 4) Tried inserting the Windows 7 disc and running repair from there but it just takes me to the same Windows system recovery mode which still does not work. 5) I tried hitting F8 during boot to go into safe mode but no good. it only takes me to a screen which gives me the option for boot order. 6) run the memory test from recovery console - no problems.
I have read the BSOD thread but everything there seems to assume that you can already boot into Windows at sometime and download the exe to run. (I cannot get into windows at all)Does anyone have any suggestions? I built this one myself (4th build) and have never in the 10 years of using Windows had a problem which I could not get into at least safe mode.I can go to maybe until this weekend but need to use my computer by Saturday cob.If I have had no luck at that point i will have to reinstall windows (it is on its own harddrive with most all of my applications on separate drives. So that may be a small blessing.I have had no strange occurrences while using the computer which is on pretty much 24/7.Is this what happens when a harddrive crashes? This one is about 2.5 years old and there have been no warning signs that something was amiss (no clicking etc)
on my computer I have java6update 29 and java 1.7.0-01,I have tried to uninstall java 7 by following the prompts eg uninstall,it then says preparing to uninstall,then up pops;dO YOU WANT TO ALLOW THE FOLLOWING PROGRAM TO UPDATE SOFTWARE ON THIS COMPUTERiT DOESN'T MATTER WHETHER i CLICK YES OR NO ,it still wont uninstall,I havesuccessfully been able to delete other programs without this happening,I have windows 7 home premium
I am currently running Java JRE5u22.If JRE6uxx is installed, then the Java Control panel does not open, and java works randomly. For example, (URL) will display the version that is installed, but (url) will succeed. Some applications that depend on Java will not work, but they did before with a JRE6uxx So something happened that render JRE6uxx partially broken.
I have a new Dell Inspiron 660 with Windows 7. I have downloaded Java numerous times using the three standard browsers and it will not take/work. I know Java isn't the best program in the world to have on a computer, but I use it for playing games (which is my primary "entertainment" use of the computer). It is frustrating for this not to work.
I just installed the 64bit vesion of java. I am trying to save a video from keepvid, but it keeps showing that java is not installed or disabled. I installed it and it said that it was in fact installed but it does not show up in program files, browser, or manage add-ons. I have tried quite a few things after searching around. Nothing seems to be working.
For the last few weeks in rarely touching minecraft, whenever I did, I'd get an "Out of Memory!!" Error message and quit the game. Well, I detected that I was playing Minecraft SP on Java 32 bit, when I have a x64 OS. I tried downloading and installing x64 Java but it made no difference. I tried uninstalling the x86 version but when I opened Minecraft it gave me an error saying that it was missing some files prior to me uninstalling the x86 version of Java 7.
