Vista Only Starts In Safemode, Normal Start Crashes?
May 10, 2010
i got a problem with Vista, a normal start causes a crash (+memdump), it only starts in safemode, how to repair it ? i have already ran the installation-disk several times.
whats a little bit mysterious is the fact that last time i used that Vista-partition it worked normally. i then copied all files to a new partition on another harddisk and i have since then used that partion instead.
i changed CPU 2 days ago, can that be the cause ? the computer is otherwise working OK, im running Windows 7 on a another partition.
View 9 Replies
ADVERTISEMENT
Mar 29, 2012
I've been looking for a fix for 5 hours and no luck-
System restarts as soon as it enters the splash screen, but I can enter into safe mode-
View 1 Replies
View Related
Nov 9, 2012
I tried to do a clean start up and still freezes. I've tried to restore it to previous settings and still having problems. Sometimes it freezes when i'm logging on and if i make it past that then it usually freezes within the next 1-3 minutes.
Computer
Processor - Intel i7-260 3.4 ghz
Ram - 8GB
64 bit Windows 7
I really would like to avoid having to completely erasing my Hard Drive.
View 9 Replies
View Related
Nov 7, 2012
I was instructed to remove my antivirus software and reinstall it by avast. They said to run their tool in safe mode. Try to start computer in safe mode and it gets just so far and reboots. I set MSConfig to boot as safemode/minimal. Do that and restart. Endlessly restarts - safe mode will not load, it just gets so far and then reboot.My computer will not start now at all. Can not get a command prompt, safe mode, and could not do a restore for some unknown reason.
View 4 Replies
View Related
Dec 3, 2012
I'm trying to run memtest 86+ because I suspect I'm having a RAM issue - was getting lots of BSODs and now I am unable to reinstall windows (currently using ubuntu). I have made a bootable dvd with memtest86+ on it and a bootable usb as well as the built in memtest that is built into the linux grub bootloader. When I boot from any of these devices, the memtest screen (blue, with some writing - I recognize it from screenshots of the program) will pop up for about half a second, then it goes away and my computer restarts. This happens in an endless cycle until I turn the computer off or take the disk/usb out.
View 9 Replies
View Related
Jun 8, 2011
This is seriously why I hate IE. As soon as I click the Internet Explorer 9 icon to start it... it crashes. It appears for a split second then closes.I tried running the Advanced SystemCare 4 "Fix IE" option.... and it didn't work. What do I need to do. I need it for a few sites.
View 2 Replies
View Related
Oct 23, 2012
the sound crashes randomly, and any videos also start lagging, (both Internet videos and windows media player videos,) at the same time. it occurs any time, sometimes half an hour from when i started the computer, sometimes after 6+ hours. the only thing that solves the problem is to reboot the computer. i installed a clean install of windows, but it still crashes. the sound works fine when it's not crashed. i always have conversations in skype, maybe that has something to do with it?
my computer is an acer aspire m5810:
intel core i7 860 @ 2,8 ghz
nvidia geforce gts 240
4,00 gb ram
500+300 gb hard drive
realtek high definition audio
windows 7 ultimate 64bit
View 2 Replies
View Related
Jul 25, 2012
I'm using a 2007 Toshiba Tecra M5 Laptop. I've run the SF Diag Tool, so here are the details.My laptop has thus far crashed 5 times today in a time span of 3 hours, what can I do to make this stop? Any ideas why this happens?
View 9 Replies
View Related
Dec 28, 2011
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
View 3 Replies
View Related
Jun 1, 2012
I am using windows 7 32 bit on my computer. while booting my computer initial windows 7 logo appears with keyboard num lock lit; but after the logo stuff; the user choice screen should have appeared but; the num lock key goes off and doesn't re light and black screen appears. But it works fine with safe mode and safe mode with networking?? What could be the problem??
View 1 Replies
View Related
Apr 24, 2011
I'm trying to upgrade to Windows 7. I'd previously had Vista Home Premium 64bit installed, and everything was fine apart from loading speeds, odd crashes etc. I bought a student edition copy of Windows 7 Professional (64bit) from software for students.com. I did a check to see if the pc was good to go with a windows 7 update tool, and had no errors. Also checked if it was compatible going from home premium to professional. And all was good on that front.
Ok, so I bought the bootable disk, and put it in the pc ready to install. All goes well until the last part where it copies over files from previous windows, and then the display goes from normal to a green/yellow. White is no longer white, more a yellow, and all reds and blues all become a wash of greeny yellows too. The installation completes, and no driver updates for either graphics, display or windows updates remedies this.
I've tried printing screen and emailing to my iphone, and the display is perfect! I've reinstalled twice, and again all colours are bang on until the same point in the install, and then it reverts to the yellow/green display. I've now just tried a clean install deleting the old partition, and surprise surprise its gone green/yellow again. It can't surely be the monitor if all boot up screens and during installation is displayed correctly can it? Same goes for drivers.
View 9 Replies
View Related
Mar 17, 2011
just built a comp asus sabertooth x58 mb i7 950 wd hd 1tb 64mb cash sata600/6g .ocz psu 500watt nvidia 9800gt . what i have going on is if I leave the comp on just let it stand. when i come back after a few hours the comp is off.I hit the power button it come on to the boot in safe mode or start windows normal, the comp is 2 weeks old and for fans cpu is stock, 200mm on top, 120s on frt, side, and rear
View 9 Replies
View Related
Mar 19, 2012
I have recently noticed the last couple of weeks that my computer is running slower than normal. In the last week. I noticed my anti-virus software from Norton is no longer working. When I tried to delete the file to re-download it the program would not delete from my computer. I tried to just update it from the internet the "Run; Save;Cancel menu appeared and when I clicked run nothing happened. I tried this function in safe mode with the same result.
Now my problem is affecting other programs like Microsoft and the shortcuts on my desktop. I have tried downloading the AVG anti virus I ran into the same problem. I am lost for options since it is not letting me run any programs on my computer. I can download programs just fine but thats it. I can use the internet just fine but I try to stay away from that since it leaves me open for more viruses. I need to know of other options that I can try.
View 6 Replies
View Related
Dec 16, 2011
Yesterday, I added malware bytes protection and also last night installed avg 2012. Ran scans, everything was moving faster. Shut down last night...and this morning windows will not come on in normal or safe mode. When try to start in safe mode it says STOP: c0000135 program cannot start %hs is missing. On another post with similar code it had a link to put on usb drive and to put in infected laptop and restart with f8. When I did that it said no bootable partition in table. When usb is not in it just goes back to stop message. I have a dell inspiron core i3 (I don't know if that matters). I have tried running restore to previous time and it did not work. when i click on repair it goes to the launch window or start in safe mode option?
View 2 Replies
View Related
Jan 16, 2013
I am using acer laptop,intel pentium processor,windows7 professional,my problem is windows is not starting normally and is running safemode.when entering normall mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally.
View 1 Replies
View Related
Feb 16, 2013
i cant start my laptop in normal mode. when i start in normal ,mode i stuck in black screen only the mouse pointer is appear, when i wait it reboot again but still i get stuck in black screen
View 1 Replies
View Related
Jan 12, 2012
I have tried at least 5 times installing the OS by using Recovery DVD's that I order from HP. I am able to boot from the DVD's and go through the process of Inserting Disc 1, Disc 2, and Disc 3. Once the setup is complete, I am prompted to Click Continue so that the system can restart the computer and continue the windows 7 Installation. It never even starts the installation. It gives me the following screen:
Windows Boot Manager. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: Insert Your Windows installation disc and restart your computer. Choose your language settings, and then click "Next." Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible.
ENTER = Continue
ESC = Exit
If I press Enter I am greeted by another Windows Boot Manager screen.... that says "Choose an operating system to start, or press TAB to select a tool".
Troubleshooting I have done:
- I have tried to install the OS in different ways. i.e. with a formatted HDD, re-installing over error msg, swapped hard drives.
- I also inserted the "Windows 7 Repair disk" (I made the disk from my other windows 7 machine that is also 64-bit)
From there I boot it up, and it detects start up problems and tells me to click restart to fix issues. I restart and cross my fingers to only end up disappointed by the screen above. I have also checked and I do have boot from notebook HDD as my primary boot up device.
View 10 Replies
View Related
Feb 5, 2013
I have a video card that used to boot up in windows 7 - but know this computer with a GeForce 9500GT video card boots up with the Vista boot up logo.I found out this was the video card because I have another card with another GeForce video.I took the swapped the video cards, and the indication changed. The original computer booted with the windows start up screen. And the test computer booted up with the vista boot up screen.
I was told by a local computer repair facility this had something to do with video drivers.I tried what the organization suggested and uninstalled all video drivers (I used generic Windows 7 Video Drivers).Then the organization recommended downloading the latest video drivers for the GeForce 9500GT.This video card has 512GBytes of memory. I did this.Then I was told to install the newly downloaded video drivers.I resrted the computer with the Vista login screen with windows 7 operating system,and the vista login screen was displayed.
View 1 Replies
View Related
Jul 3, 2011
My computer won't startup in normal or safe mode and I was told my windows 7 may be corrupt. I am trying to reinstall it, but I'm not sure how. I place the disc in the drive and rebooted the computer but it didn't work. The system repairs won't work, nor will system restore. Is there a command prompt or anything?
Desktop
Ibuypower WA 910i
64-bit
View 3 Replies
View Related
Mar 23, 2010
I`ve got a weird problem that keeps happening. Without any errors or warningall of my Desktop Icons become frozen. I cannot activate any of them. If Ihave any windows open in the Taskbar or programmes running in the System trayI can left/right click on any of them and they all workfine(Programmes/Window Explorer/IE7 etc). I can access the Start menu andis the solution if it happens in Windows Vista but this
View 8 Replies
View Related
Jun 18, 2012
For some reason, my start menu has suddenly become ridiculously tall, spanning the entire height of the screen. This image might give a better idea: imgur: the simple image sharer.
I have no idea how or why this happened. I tried searching for the problem, but I can't find a single thing even remotely related. My recent items count is at 0, so it's nothing to do with that. I've already tried fiddling about with the setting for that, but with no success at all. I tried a system restore to before this occurred, but this had absolutely no effect either. It's only affecting this profile, and no others (although, really, the only others are guest or temp accounts).
View 1 Replies
View Related
Jan 15, 2012
I just recently upgraded to Windows 7 from Vista. Before upgrading, everything was fine. Now, I have a rather annoying sound problem. When I play anything that uses flash, the program will freeze up and have to be ended. After this point, the sound on my computer is completely gone until I restart the system. Additionally, I cannot access the volume control panel or anything that deals with the sound settings after this particular event occurs. I've been doing a little bit of research, and it sounds like the IDT sound codec is the problem. I followed the instructions on this link to a point. Fixing Flash Crashes after Windows 7 Upgrade: IDT Sound Codec Conflicts with Flash Drivers Causing Crashes |[URL] Here are the instructions that it gives: Disabling Software at Boot:
Click on the Start button, and then click 'Run...'In the Run window, type msconfig and click 'OK'.Go to the 'Startup' tab and locate the Startup Item named IDT PC Audio by IDT, Inc.Uncheck the IDT PC Audio item.Click 'Apply', and then click 'OK'.Reboot the laptop for the change to take effect.
Disabling Enhancements:Click on the Start button, then click Control Panel, and click 'Sound' from the context menu.Highlight 'Speakers / Headphones' from the list of playback devices, then click on the 'Properties' button.Go to the 'Enhancements' tab, and check the checkbox labeled 'Disable all enhancements'.Click 'Apply', and then click 'OK'.Highlight 'Independent (R.T.C.) Headphones' from the list of playback devices, then click on the 'Properties' button.Go to the 'Effects' tab, and check the checkbox labels 'Disable System Effects'.Click 'Apply', and then click 'OK'.Click 'OK'.
My problem with following these instructions is that I do not have 'Independent (R.T.C.) Headphones' in the list of playback devices. The four playback devices that I have listed are 'Digital Output Device (HDMI)', 'Speakers and Dual Headphones','Independent Dual Headphones' and 'SPDIF (Digital Out via HP Dock)'. That being the case, I cannot disable the last portion of the IDT sound codec. As a result, my problem persists. I was wondering if anyone knows how to get around this. Would it be wise to just uninstall the idt sound codec altogether? My computer is the HP Pavillion dv7-2185dx Entertainment Notebook PC?
View 8 Replies
View Related
Apr 4, 2011
I am using windows seven ultimate. I have accidentally choosen Display 2. In the screen resolution and now my laptop doesn't start in normal mode. Its like I have to connect to an external display like a laptop to view my Desktop. I can only access it using safe mode..
View 1 Replies
View Related
Jan 4, 2012
About a week or two ago, when I tried to start up my computer, at some point in the start up process (before my desktop was displayed), a blue screen of death popped up and i had to restart my computer. I didn't think much of it at the time since my computer started up fine after a restart.But since then, its been happening more and more frequently. I've noticed that what usually happens is I'll leave my computer for sometime and it will go into sleep mode, and then when I try to start it up again, it won't wake back up. So I'll turn it off, and when I turn it back on, I get a BSOD again. By now i have to try to start it about 4 or 5 times before it finally starts up all the way.
Also, occasionally the BSOD will pop up while I'm actually working on my computer.Also of note is that its not the same STOP error code every time. I've started writing them down today and this is the stop codes I've seen so far today...[CODE]
View 8 Replies
View Related
Aug 26, 2012
Since about 4 months ago, my computer has crashed randomly. Every time this happens, I would try to reboot it, and it would start for between one second and five minutes before crashing again. It would continue to refuse to start like this for 10 minutes to three days at one point.It started four months ago, and occurs fairly rarely. Since the first "series" of crashes, it's only happened five or six times, with anytime between a week and a month separating the crashes.My computer has just crashed again, and as expected, is not opening right now, so I'm typing this from my tablet.if there's any specific information needed please tell me and I'd be happy to gather it once my computer decides to start up again.
Edit: More info - Windows 7, computer is about 10 months old, and I do this have a warranty on it. A curious note, the light on my wireless adapter remains on after the computer has crashes, whereas it would normally be off if I turned the computer off normally.Gives me the option of starting in safe mode, crashes there too. Usually it'll crash before the option is even offered. I've also tried plugging it into other sockets around the house, but still crashes.
View 4 Replies
View Related
Oct 10, 2012
So when i got home this afternoon I turned my computer on as usual. However, when it reached the desktop, I got an error message saying that "Windows explorer has crashed blah blah" It couldn't find a solution, restarted and then crashed immediately ad infinitum. This means I can't get into my computer at all to get any logs or anything. I also tried running it in safe mode but my Keyboard doens't appaear to be "active" in the period you need to hit F8
View 14 Replies
View Related
Dec 5, 2012
I have a lenovo pc 9210 all diags pass all hardware is good. was running xp fine loaded vista ok loaded windows 7 32 bit runs ok, needs windows 7 64 bit...loaded windows 7 64, reboots after load begins first time setup then completes as normalreboots ....and hard drive light blinks .... then starts to start windows 7 but gets the four colored dots then just sits there no more hd lights no , no nothing.
View 2 Replies
View Related
Feb 5, 2012
Computer crashes for no reason then fails to start. I get half of the post screen which says 1 Keyboard 2 Mice 1Hub then nothing? It should show all the HDD installed next but nothing shows. The only way of getting the computer to boot after this is to disconnect SSD from the motherboard? Any Ideas guys and gals...
View 9 Replies
View Related
Apr 13, 2011
I have a game (Battlefield 2) that has certain issues under Windows 7. In online gaming, apparently the punkbuster fails to communicate in the right way until the process bf2.exe is set to priority "lower than normal" in the task manager. this means you have to start the game, alt+tab back to the desktop, lower the priority in the taskmanager and then start playing.this procedure has to be repeated everytime i want to play with punkbuster (so every time )And yes, I browsed all, and I mean ALL, forums of BF2 and Punkbuster to fix this issue, so far this is the only solution that makes online gaming possible.how to lower the priority of a process permanently and automatically every time the process starts up?
View 1 Replies
View Related
Jan 16, 2013
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
View 1 Replies
View Related
Oct 28, 2012
I have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.
View 44 Replies
View Related
