Set A Process Automatically To Priority "lower Than Normal" On Its Start?
Apr 13, 2011
I have a game (Battlefield 2) that has certain issues under Windows 7. In online gaming, apparently the punkbuster fails to communicate in the right way until the process bf2.exe is set to priority "lower than normal" in the task manager. this means you have to start the game, alt+tab back to the desktop, lower the priority in the taskmanager and then start playing.this procedure has to be repeated everytime i want to play with punkbuster (so every time )And yes, I browsed all, and I mean ALL, forums of BF2 and Punkbuster to fix this issue, so far this is the only solution that makes online gaming possible.how to lower the priority of a process permanently and automatically every time the process starts up?
I recently have installed and uninstalled apache server in order to make it work, now I use XAMPP which SUPPOSEDLY starts the service manually when opened. However since I have installed it, windows is taking a long time to show the desktop when booting. It says Welcome for a while, then a black screen and finally the desktop is shown.Is there a way to set showing the desktop the number 1 priority ?
I'm using Matlab daily and I am using it in Real Time and I have some isues, so my friend told me how to put it on Real Time priorty in Task Manager...
I tried but I god error message: Unable to set Realtime priority. The priority was set to High instead...
I'm running a few gameservers myself on Windows Server 2008 R2 but I'm wondering if it's possible to make my system recognize that the process was ran earlier, and it'll apply the correct affinity and priority.
The problem is that I used to use ProcessLasso, but after 40 days of uptime (and then a restart) I'm not able to run the program without purchasing it.
I just recently got a wireless adapter and installed it and the drivers but i am maxing out at 3mbps on every speed test site. when i boot into Ubuntu with the same computer and same wireless card i get up to 9mbps.
Every time I manually start hibernation it will begin the process; the monitor will go blank, the harddrive starts making the image and after about 30 seconds the the monitor comes on and the computer is in normal operation. I have tried enabling it with the command line (powercfg -h on) as the administrator with no success. This just started yesterday. I have not installed any new applications or any new updates.
my system shutdown automatically with in 10 min in normal mode. if i am using safe mode system will work upto one hour. what i do to? can i monitor my hardware temperature?
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
just built a comp asus sabertooth x58 mb i7 950 wd hd 1tb 64mb cash sata600/6g .ocz psu 500watt nvidia 9800gt . what i have going on is if I leave the comp on just let it stand. when i come back after a few hours the comp is off.I hit the power button it come on to the boot in safe mode or start windows normal, the comp is 2 weeks old and for fans cpu is stock, 200mm on top, 120s on frt, side, and rear
i will be building a new PC soon and I want to use my old HD in the new PC which has Win 7 32bit installed and working fine. The new PC is a 64 bit machine so I will need to move to the 64bit version of Win 7 which came with the 32bit on another dvd.So my question is, What do I need to know before I start the process of going to 64bit Win 7?
Hey. I got my windows 7 installation cd today. and I put it into my brand new windows vista computer. the installation started, but then it suddently stopped where it said "the computer has to be restarted". After having this message on the installation screen for 15 min I clicked the off button on the computer, and started it again.
Then the nightmare began, when the computer starts, it says: "starting installation" - then the error message - "The installation process cannot be started". if I click ok. the computer restarts and the same happends. if I X it. the computer restarts and the same happens. Im completely stuck with this error and cant either go back to vista or keep installing windows 7.
Tried to hold down F8 when it starts, but nothing happens. For now I just want to go back to vista.
I have recently noticed the last couple of weeks that my computer is running slower than normal. In the last week. I noticed my anti-virus software from Norton is no longer working. When I tried to delete the file to re-download it the program would not delete from my computer. I tried to just update it from the internet the "Run; Save;Cancel menu appeared and when I clicked run nothing happened. I tried this function in safe mode with the same result.
Now my problem is affecting other programs like Microsoft and the shortcuts on my desktop. I have tried downloading the AVG anti virus I ran into the same problem. I am lost for options since it is not letting me run any programs on my computer. I can download programs just fine but thats it. I can use the internet just fine but I try to stay away from that since it leaves me open for more viruses. I need to know of other options that I can try.
Yesterday, I added malware bytes protection and also last night installed avg 2012. Ran scans, everything was moving faster. Shut down last night...and this morning windows will not come on in normal or safe mode. When try to start in safe mode it says STOP: c0000135 program cannot start %hs is missing. On another post with similar code it had a link to put on usb drive and to put in infected laptop and restart with f8. When I did that it said no bootable partition in table. When usb is not in it just goes back to stop message. I have a dell inspiron core i3 (I don't know if that matters). I have tried running restore to previous time and it did not work. when i click on repair it goes to the launch window or start in safe mode option?
I am using acer laptop,intel pentium processor,windows7 professional,my problem is windows is not starting normally and is running safemode.when entering normall mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally.
i cant start my laptop in normal mode. when i start in normal ,mode i stuck in black screen only the mouse pointer is appear, when i wait it reboot again but still i get stuck in black screen
i got a problem with Vista, a normal start causes a crash (+memdump), it only starts in safemode, how to repair it ? i have already ran the installation-disk several times.
whats a little bit mysterious is the fact that last time i used that Vista-partition it worked normally. i then copied all files to a new partition on another harddisk and i have since then used that partion instead.
i changed CPU 2 days ago, can that be the cause ? the computer is otherwise working OK, im running Windows 7 on a another partition.
My computer won't startup in normal or safe mode and I was told my windows 7 may be corrupt. I am trying to reinstall it, but I'm not sure how. I place the disc in the drive and rebooted the computer but it didn't work. The system repairs won't work, nor will system restore. Is there a command prompt or anything?
Is there a way to make a start up process start with a delay of say 30 seconds via the registry? I tried software but none of them work with win 7 beta.
EDIT: If not, Is there a way to have the start up programs start in a certain order?
Misunderstood a tech friend of mine and accidentally deleted both partitions when attempting to upgrade to windows 7. Now when I try to load the installation disc, it says there are no drivers anywhere and I'm unable to start the installation process. Is there somewhere I can download all new drivers?
I`ve got a weird problem that keeps happening. Without any errors or warningall of my Desktop Icons become frozen. I cannot activate any of them. If Ihave any windows open in the Taskbar or programmes running in the System trayI can left/right click on any of them and they all workfine(Programmes/Window Explorer/IE7 etc). I can access the Start menu andis the solution if it happens in Windows Vista but this
For some reason, my start menu has suddenly become ridiculously tall, spanning the entire height of the screen. This image might give a better idea: imgur: the simple image sharer.
I have no idea how or why this happened. I tried searching for the problem, but I can't find a single thing even remotely related. My recent items count is at 0, so it's nothing to do with that. I've already tried fiddling about with the setting for that, but with no success at all. I tried a system restore to before this occurred, but this had absolutely no effect either. It's only affecting this profile, and no others (although, really, the only others are guest or temp accounts).
I am using windows seven ultimate. I have accidentally choosen Display 2. In the screen resolution and now my laptop doesn't start in normal mode. Its like I have to connect to an external display like a laptop to view my Desktop. I can only access it using safe mode..
I can't find how to start up a program automatically when the computer comes on. It was easy under Win xp but I can't find the command.When I go to msconfig I can see the programs that are loaded but don't see how to list a program to be started.
I have a small utility that I need to run at startup, but it has a password. I have dragged the utility to the startup folder, so that part is fine for when Windows 7 boots, but does anyone know how to have the password input as the software starts?
I a machine with Win 7 (Utlimate) with several users (lets call them A,BC..). I have installed MS Virtual PC on it and have 3 Virtual Machines (all Win 7s - lets call them X,Y and Z).
I want to know is it possible that if User A logons on, VPC X gets fired automatically, if User B logons, VPC Z gets fired?
What I need to do is turn on a Windows 7 computer every hour for about five minutes and then turn it off again automatically; while the computer is on I have to run a macro. The cycle described before has to be repeated 24 hours, so, the computer is automatically turned on, it automatically runs the macro and when the macro ends, it goes off again 24 times per day. When I say �turn off� I mean, either turn off the computer or send it to a low energy consumption state like hibernation or sleep� Basically I know how to automatically turn off the computer and turn it on once per day using the BIOS setup, but I don�t know how to do this several times in a day automatically and then call the macro every time�
I would like to know if is possible to show All Programs in the start menu automatically when you click the orb. Because clicking every time to show the list of All Programs is not very nice since I don't use the recently programs open function.
Screensaver wont start automatically.I just reinstall Window 7 64-bit Professional.Everything appeared to be working until I did window update. Any clues?
This issue is bugging me for some time.Does anyone know how to stop mouse keys from starting on their own on startup?This happens since I first used them on this pc.I did try turning them off before logging off,but it didn't work.It's not something serious,but the icon confuses me.
I have Dell Inspiron 1545,when I start laptop it says windows is loading,it takes sometime and runs start up repair, which fails to fix problem automatically and shutdowns the machine.It's windows 7 home basic 64 bit.I don't get complete system recovery option other than start up repair option.When I go for advanced boot up option - F8, all options comes but whatever option I take whether computer repair,safe mode,safe mode with networking,safe mode command prompt,restore to last known good configuration,it does the same thing loading windows and then run startup repair.In logs I see courrpted registry error message.I did diagnostic test, it passes all test, I have windows 7 professional iso DVD burned which I am using to boot, since my installation disc came with laptop is not working at all.I don't have iso for windows 7 home basic.
