Windows Is Loading And Start Repair Not To Fix Automatically
Sep 3, 2012
I have Dell Inspiron 1545,when I start laptop it says windows is loading,it takes sometime and runs start up repair, which fails to fix problem automatically and shutdowns the machine.It's windows 7 home basic 64 bit.I don't get complete system recovery option other than start up repair option.When I go for advanced boot up option - F8, all options comes but whatever option I take whether computer repair,safe mode,safe mode with networking,safe mode command prompt,restore to last known good configuration,it does the same thing loading windows and then run startup repair.In logs I see courrpted registry error message.I did diagnostic test, it passes all test, I have windows 7 professional iso DVD burned which I am using to boot, since my installation disc came with laptop is not working at all.I don't have iso for windows 7 home basic.
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
One day my computer decided not to load windows 7, and instead whenever i open my computer it gets to setup repair, which checks for problems automatically, and then gives the following message:Setup repair cannot repair this computer automatically
Problem Event Name: SetupRepairOffline Problem Signature 01: 0.0.0.0 Problem Signature 02: 0.0.0.0 Problem Signature 03: unknown Problem Signature 04: 0 Problem Signature 05: unknown Problem Signature 06: 1 Problem Signature 07: unknown
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
Late friday I attached a new NANO Ipod to my laptop to charge and load music. I left it for the day and when I returned later my computer had frozen, completely. I had to turn it off to restart. When it came back, I attempted to eject the Ipod, but got a message that siad it was still in use - I couldnt figure out what was using it and simply disconnected it, unplugging the USB. It subsequently froze again, and I re-powered it again, this time I got the mesasge that windows shut down incorrectly and needed to do a scan disc. And so it began.
It continued to cycle through the scan check, then go to my log in window, but nothing worked. No pointer, I couldnt put in my password, nothing. So I turned it off again, and again it went through the drill. eventually it was just cycling through the shots I've uploaded, restarting and going through again and again. I allowed it to run its scan(s) for more than 40 hours. When I returned last night my log in window was on, so i logged in. The welcome sign appeared and with it the spinning (I'm thinking) signal but nothing prevailed. It did this for 30 + minutes and I could do nothing else. No other buttons or commands have worked at all.
i am using windows 7 ulti 32 bit and while starting i am getting "windows cannot repair this computer automatically"and in Diagnostic and repair details Start up Repair ha tried several times but still cannot determine the cause of the problem
I have a hp g62-231nr laptop and it broke before sent it out, got it fixed and everything was great. about four or five months go by and one night i was playing games on the laptop, the laptop died plugged it in and went to sleep. woke up in the morning to a black screen says media cable something something no bootable device please insert bootable disc and press any key. I downloaded the windows 7 system repair disc and popped it in it loads up says there is no operating system and load drivers cant find any drivers but there is a hard drive disk named Boot (x and two removable devices, the system repair disc in the dvd drive and removable device C. I cancel and press next and be brought into system recovery menu I click on startup repair or system repair. It tries to find problems than says cannot repair windows automatically I click details and this is in the white box.
Problem Signature: Problem Event Name: StartupRepairOffline Problem Signature 01: 0.0.0.0 Problem Signature 02: 0.0.0.0 Problem Signature 03: unknown Problem Signature 04: 0 Problem Signature 05: unknown Problem Signature 06: 1 Problem Signature 07: unknown OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033
I exit out and cannot do system restore memory test is 100% ok. BIOS system diagnoic says error code 03f0 Hard Drive Not Exist the main BIOS menu says the BIOS system is idle. Version for BIOS system F.17 i tried the recovery disks but it says that windows does not support the media on this device. I also have an .iso file of windows 7 home premium dvd but it doesn't do anything so im thinking its a bad .iso copy of windows somehow or I burned it wrong maybe? If there's any other information needed i will gladly post it just ask. also I cannot get to logon screen on startup. The hard drive makes the same soft spinning sound not beeping or anything. I need this computer for work its a business laptop. also i cannot access system recovery from F11 the words show up in bottom left corner on startup but even if you repeated hit f11 or hold it down it brings screen to black screen media cable failure check cable exiting pxe-rom..no operating system etc.
I have a new Dell laptop running Windows 7 Professional 64-bit. I have SQL Server 2008 Express installed on it. In the Configuration Manager, I have specified StartupMode = Automatic for the SQL Server service. However, most of the time it doesn't start automatically. I have to execute the Configuration Manager and start it manually.I thought it was a problem with SQL Server and so was seeking help from a SQL forum. All they could suggest is uninstalling and reinstalling SQL Server.Lately I've realized that LogMeIn Hamachi also doesn't always start automatically as it should. That made me think that it might be a Windows problem and not necessarily a SQL problem.In the Services tab of msconfig, both LogMeIn Hamachi and SQL Server are listed and checked; they both happen to be running right now.
I have a toshiba laptop that runs windows 7 32bit home premium and it is not booting properly. When I turn it on t will show the microsoft logo and says "starting windows" but never gets past that point. I have tried all the fixes to no avail including, safe mode (will not boot into safe mode..starts to load but stops at drivers/atipcie.sys and sits there for a minute or two and goes to the repair startup recommended screen. I have tried startup repair and done it many times because I have read it can take several times (it says "startup repair cannot repair this computer automatically") I have tried the windows repair disc using system restore but it says no restore points found, even though i know they are on my computer. All of my school files are on this computer and while I have some of there backed up on a external hard drive there are some more recent files that are not. What can I try without a clean install to try and repair this?
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
My dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.
I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.
I recently got a virus 2 days ago. It disable my possibilities from accessing any program or internet. I made a mistake by downloading a windows something ware to boot up security. It then crash...so I went to task manager didnt work, which i then went to search and entered msconfig. I then chose safe mode in minimal services. It then says loading files. U see a black screen with thite letters of the files being loaded. Then u see ur mouse cursor, and then it boots up again and same process. So I tried launch startup repair, it launches a repair, but it says it startup cannot repair this computer automactically. I then result into going to tapping f8..it goes to the screen of advanced options. Problem is if i try safe mode it will crash. I dont have a backup, and i dont want to lose my movies of over 700 gigs.
I am trying to sell my Dell XPS L401X (XPS 14) that I bought in December of 2010 but I have encountered a serious problem with it. I loaded the computer from factory settings as it had blue screen and refused to start up without startup repair and dell datasafe backup or w/e that program is called. I loaded it up, installed Google Chrome, cleared my history on IE, downloaded MSE, the latest nvidia drivers and java 7 64 and deleted all those and emptied the recycle bin once done installing those. I shut down the computer to install updates and get a blue screen as soon as it passes the startup screen. Every time I attempt to launch using startup repair it just opens up another window with a black screen and the option of startup repair and normal repair, never actually going to startup repair, just continually refreshing every time I select startup repair.
So I opened my laptop this morning, tried to log in and was stuck on the welcome screen for about 10 minutes. I restarted using the power button and when restarting it said "loading files" then went to a black screen. I restarted again and it gave me the option to select a safe mode or startup normally. I selected safe mode and I was stuck on the startup bit with the windows logo for 10 minutes and then it went back to the selection screen this time with the options being startup repair and launch windows normally. I selected startup repair and it went to a black screen for 10 minutes, then went to a screen like the login screen background but grey. It wasn't frozen and I could still move the mouse so I could tell it was loading and I waited >20 minutes and it didn't change. I restarted and did the same thing multiple times.
My computer closed down when i started it i got the message start up repair cannot repair this computer automatically. My details are Acer 3812 win 7 no windows start up disc or original windows 7 microsoft disc. Im told best get a new computer as it won't reboot.
Basically what happened is my vista drive died. This was the first drive with the MBR on the system. I had been using the Windows 7 raid (Nforce) for a while with no issues until the vista drive died in a fire. So my current problem are as follows:1.When I toss the Windows 7 DVD in the drive and attempt to load the NForce drivers for my system (needed for the repair procedure), I get failed to load drivers. Yes I have ensured to point the Windows repair utility to the correct files on the CD that came with the board (XFX 750i). They will attempt to load but just fail.So my question now is how do I get my RAID 0 setup to boot? There is no MBR on this disk. Is it possible to write the MBR to the disk once the drivers finally get loaded?
I have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
I had to perform a force shut down today, upon restart win 7 attempted to load up but got stuck on start up page, again performed force shut down to see if it would load up but with no prevail. if left for 40 min or so it will finally get to login/password screen but after password input nothing happens.I have tried start up repair F8 but again after completion the screen freezes. also where there where more options such as safe mode these have know gone and i am only left with start windows normallyrepair modei did carry out a safe mode but it froze half way through and know that option has gone.i have no backup disk but i did backup win 7 to my external hard drive but am unsure wheter i can load from this.my lap top details are as follows.
I was browsing the web and my laptop froze. I held the powe button to turn it off and now when i turn it on, it only goes to the windows logo and no farther. If i leave it alone, after 20 minutes it goes to a black screen with a cursor. I have tried starting in safemode as well and it only loads some of the files before freezing. I have also tried startup repair. After a few minutes it gives a few options such as system restore. I tried a restore and it still doesn't load.
I was attempting to run chkdsk and went into Safe Mode -- no problems discovered. However, since then whenever I boot / reboot laptop Safe Mode screens reappear. Thinking back I don't recall any guidelines from any Win7 tech sites advising turning off Safe Mode. So, I initially assumed Safe Mode automatically reverted to the prior mode -- apparently an incorrect assumption. How do I get back to Normal Windows Start Up for Win7 Home Premium x64?
I got out of Safe Mode to restart somehow -- ESC key -- I did not force quit by turning off. Since then system now starts by scrolling thru 2-3 screens of "Loading: ... (various driver drive locations / various names)" and then Win 7 login screen comes in with Password box.
Everything else is running fine now except I suspect I need to go back to boot Safe Mode screen and turn Safe Mode off -- return it back to Start Win 7 Normally.
Is there a way to make windows automatically choose "start windows normally" in the case of hard resets? I have a USB monitor hooked to the system and it does not turn on until Windows loads. but if I hard reset by accident or some other reason I can't see the screen that asks what you want to do, this only can be seen when vga/dvi is connected. I know there is a timer for the start normally, but wanted to know if there was a way to make windows not even have to ask and just know to start normally?
I was booted into Windows a couple of days ago, when without any reason what soever, I was logged off, and had to log in again. I checked Event Viewer, which showed: "The Desktop Window Manager was unable to start because a composited theme is not in use."
I have an Acer Aspire 5750-6677. I3-2310m. It has been performing the startup repair for over a day. It's now, finally (I think), saying "windows is loading files". It has been doing this for HOURS! Can I simply turn it off and attempt a different method or will that make it worse? BTW: it came with zero discs of any kind when I purchased it new in July 2011. This is my work comp too and I can't lose the info that's on it.
Yesterday I came home from work to a black screen that said "Error Loading OS". Not sure how this happened, so I restarted it and it came right back to that. Spent a few minutes digging around and found out that my hard drive was not set in the BIOS as a boot drive (although no idea how that changed), so I switched it back and the computer booted fine.Today, I come home from work and again, I see the black screen that says "Error Loading OS". I restarted, went in the BIOS, and saw that of 4 hard drives in the system, only 1 (non boot) showed up. This is weird. I shut down for a few minutes, booted it back up to the BIOS, and my primary hard drive was listed again. Selected that, and Windows booted up fine.
Was using the computer for about an hour when everything just froze. The mouse still worked and moved, but nothing else at all was working. So I restarted again, and I got to a "Windows failed to start" / 0xc000000f error. Off to the BIOS again, where again, only 2 or 3 of my 4 hard drives were listed. I shut down, left it for a few minutes, rebooted back, and selected my primary drive again. Then I went ahead and created an image of my primary drive just in case.I have no idea wh thought it might be a hard drive failure, or it could be something messed up in my motherboard. I have a 64GB Crucial M4 SSD drive that is less than a year old, along with an ASRock Z68 PRO3 motherboard that was bought at the same time.
