Late friday I attached a new NANO Ipod to my laptop to charge and load music. I left it for the day and when I returned later my computer had frozen, completely. I had to turn it off to restart. When it came back, I attempted to eject the Ipod, but got a message that siad it was still in use - I couldnt figure out what was using it and simply disconnected it, unplugging the USB. It subsequently froze again, and I re-powered it again, this time I got the mesasge that windows shut down incorrectly and needed to do a scan disc. And so it began.
It continued to cycle through the scan check, then go to my log in window, but nothing worked. No pointer, I couldnt put in my password, nothing. So I turned it off again, and again it went through the drill. eventually it was just cycling through the shots I've uploaded, restarting and going through again and again. I allowed it to run its scan(s) for more than 40 hours. When I returned last night my log in window was on, so i logged in. The welcome sign appeared and with it the spinning (I'm thinking) signal but nothing prevailed. It did this for 30 + minutes and I could do nothing else. No other buttons or commands have worked at all.
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
One day my computer decided not to load windows 7, and instead whenever i open my computer it gets to setup repair, which checks for problems automatically, and then gives the following message:Setup repair cannot repair this computer automatically
Problem Event Name: SetupRepairOffline Problem Signature 01: 0.0.0.0 Problem Signature 02: 0.0.0.0 Problem Signature 03: unknown Problem Signature 04: 0 Problem Signature 05: unknown Problem Signature 06: 1 Problem Signature 07: unknown
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
i am using windows 7 ulti 32 bit and while starting i am getting "windows cannot repair this computer automatically"and in Diagnostic and repair details Start up Repair ha tried several times but still cannot determine the cause of the problem
I have a toshiba laptop that runs windows 7 32bit home premium and it is not booting properly. When I turn it on t will show the microsoft logo and says "starting windows" but never gets past that point. I have tried all the fixes to no avail including, safe mode (will not boot into safe mode..starts to load but stops at drivers/atipcie.sys and sits there for a minute or two and goes to the repair startup recommended screen. I have tried startup repair and done it many times because I have read it can take several times (it says "startup repair cannot repair this computer automatically") I have tried the windows repair disc using system restore but it says no restore points found, even though i know they are on my computer. All of my school files are on this computer and while I have some of there backed up on a external hard drive there are some more recent files that are not. What can I try without a clean install to try and repair this?
I recently got a virus 2 days ago. It disable my possibilities from accessing any program or internet. I made a mistake by downloading a windows something ware to boot up security. It then crash...so I went to task manager didnt work, which i then went to search and entered msconfig. I then chose safe mode in minimal services. It then says loading files. U see a black screen with thite letters of the files being loaded. Then u see ur mouse cursor, and then it boots up again and same process. So I tried launch startup repair, it launches a repair, but it says it startup cannot repair this computer automactically. I then result into going to tapping f8..it goes to the screen of advanced options. Problem is if i try safe mode it will crash. I dont have a backup, and i dont want to lose my movies of over 700 gigs.
My computer closed down when i started it i got the message start up repair cannot repair this computer automatically. My details are Acer 3812 win 7 no windows start up disc or original windows 7 microsoft disc. Im told best get a new computer as it won't reboot.
AMD FX 4100 Asus M5A97 Corsair Vengeance 8gb (2x4gb) 1600 XFX Radeon HD 6870 Raid Max - 530ss CM storm scout
and used my old Seagate Barracuda 7200.10 250gb hard drive with windows 7 ultimate and it gets through the post and bios fine, but I keep getting the message "windows cannot repair this computer automatically" and it won't boot. Any ideas to get it to get it to boot into windows?my old computer was a dell inspiron 530s by the way.
I have a hp g62-231nr laptop and it broke before sent it out, got it fixed and everything was great. about four or five months go by and one night i was playing games on the laptop, the laptop died plugged it in and went to sleep. woke up in the morning to a black screen says media cable something something no bootable device please insert bootable disc and press any key. I downloaded the windows 7 system repair disc and popped it in it loads up says there is no operating system and load drivers cant find any drivers but there is a hard drive disk named Boot (x and two removable devices, the system repair disc in the dvd drive and removable device C. I cancel and press next and be brought into system recovery menu I click on startup repair or system repair. It tries to find problems than says cannot repair windows automatically I click details and this is in the white box.
Problem Signature: Problem Event Name: StartupRepairOffline Problem Signature 01: 0.0.0.0 Problem Signature 02: 0.0.0.0 Problem Signature 03: unknown Problem Signature 04: 0 Problem Signature 05: unknown Problem Signature 06: 1 Problem Signature 07: unknown OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033
I exit out and cannot do system restore memory test is 100% ok. BIOS system diagnoic says error code 03f0 Hard Drive Not Exist the main BIOS menu says the BIOS system is idle. Version for BIOS system F.17 i tried the recovery disks but it says that windows does not support the media on this device. I also have an .iso file of windows 7 home premium dvd but it doesn't do anything so im thinking its a bad .iso copy of windows somehow or I burned it wrong maybe? If there's any other information needed i will gladly post it just ask. also I cannot get to logon screen on startup. The hard drive makes the same soft spinning sound not beeping or anything. I need this computer for work its a business laptop. also i cannot access system recovery from F11 the words show up in bottom left corner on startup but even if you repeated hit f11 or hold it down it brings screen to black screen media cable failure check cable exiting pxe-rom..no operating system etc.
I have Dell Inspiron 1545,when I start laptop it says windows is loading,it takes sometime and runs start up repair, which fails to fix problem automatically and shutdowns the machine.It's windows 7 home basic 64 bit.I don't get complete system recovery option other than start up repair option.When I go for advanced boot up option - F8, all options comes but whatever option I take whether computer repair,safe mode,safe mode with networking,safe mode command prompt,restore to last known good configuration,it does the same thing loading windows and then run startup repair.In logs I see courrpted registry error message.I did diagnostic test, it passes all test, I have windows 7 professional iso DVD burned which I am using to boot, since my installation disc came with laptop is not working at all.I don't have iso for windows 7 home basic.
when I go to safe mode and hit repair computer they say I have to use a dvd and hit repair. my dvd does not have repair on it I have trouble with startup I do not know how to use the dvd if it has no repair listed
How do I make the computer automatically sign into windows 7? I don't want to have to keep choosing what OS for it to go into (in this case vaio recovery ems). If in Bios I don't know what to choose to change it.
i bought this new VAIO laptop, and i want to repair it but when i bought the laptop the store didn't give me the Windows 7 disk but i need to do a complete repair. But this computer also have This VIAO Factory restore setting which restore it to the original factory install software, should i use this option or something else?
The power saving sleep mode does not automatically "kick in" as scheduled using the power option menu in the control panel. I am running Windows 7 Professional 64 bit operating system.
My laptop (Lenovo V560) is one month old.Somehow I messed up my [COLOR=blue ! important]operating [COLOR=blue ! important]system[/COLOR][/COLOR] without backup the hard drive, That means I do not have the original OS.Now I installed a [COLOR=blue ! important]Windows [COLOR=blue ! important]7[/COLOR][/COLOR] (from Dell).My computer restarts when I doing some work.
Windows 7 home premium Dell Studio XPS 1645 I7 1.73 GHZ 6 GB DDR3 500 GB Toshiba
I have had this computer for just over a year and it has ran like a top. I was surfing the internet last night when it just shuts off (no slow down no blue screen) and boots into startup repair. It would not repair, just sat in there forever and would not boot into safe mode or anything. It just kept booting into startup repair for hours.
So I hit esc when it booted to startup repair, I go to the dell backup and restore, save my work documents and pics and let it boot to factory fresh windows install from the dell created partition. Windows reinstalls and loads fine, boots in and begins to update successfully and then reboots back into repair. This happens everytime it reboots. After sometime it will boot into windows fine. If I restart I am back into startup repair for half an hour or more.
I can't find how to start up a program automatically when the computer comes on. It was easy under Win xp but I can't find the command.When I go to msconfig I can see the programs that are loaded but don't see how to list a program to be started.
My ASUS P8Z68-Vpro Windows 7(64) system will go to sleep manually (from the shutdown menu). I have power management set to turn off the monitor and go to sleep after one minute. After a minute the monitor turns off, but the computer fan keeps on going. (What used to happen is the computer would go to sleep, the fan would turn off, but then a second or two later the computer would wake up by itself. It's possible this has changed because I'm playing with various settings). In any event, I have never gotten it to go to sleep on its own and stay there.
Even when I tell it to go to sleep manually on rare occasions it has also woken up unprovoked. On the local area connection (Intel 82579) I've turned off all wake up things (Wake on lan, wake on link, etc.) I've allowed windows to sleep even when sharing multimedia. I've turned off wake on USB. The keyboard and mouse are now the only devices in the device manager that claim to have the ability to wake the computer up. I suspect the problem may be the D-Link DWA-556 wireless card (PCI slot), although it doesn't report that it has the ability to wake up the computer.
But a few times when I have gotten the computer to go to sleep I was able to wake it up merely by screwing the antenna into the connector on the back. Even though the wireless connection had been disabled from the network and sharing control panel. Does this indicate that my wireless card is defective, or is there some setting on it that I don't know about. Are there any other reasons the computer may not go to sleep or immediately wake up? (I have looked in the event viewer and haven't seen anything suspicious.) Does windows have a log somewhere that could tell me what is waking the computer up (or keeping it from sleeping.)
hey messed around with the computer and got the printer to work for a few days then it stopped working again. We decided to buy a new printer from HP thinking that would solve our problems. So I uninstalled the old software for the first printer and tried to install the new software for the new printer. I thought it would be an easy process but it didnt work so we once again had to call HP and ask them to set it up for us. Anyway, we got the printer working and that's where our trouble started. So I woke up the next morning and fired up the computer. It said that the computer did not shut down properly due to a driver and and went into the start-up repair process. After 5 min or so the computer was back to normally and working. As the days have gone by we keep having problems with the computer shutting down after long periods of non-use and saying that the computer didnt start up properly. And now the start-up repair has failed and says that start-up repair cannot repair the problem automatically. I get this response.I am thinking this problem may have been caused when I uninstalled the old software or installed the new software for the printer or its possible that we may have a virus
Wen i leave my computer on all night to do like a virus scan or just leave it my computer automatically restarts to boot from cd and i have automatic restart on system failure turned off
I have a PC that I use as a media center attached to my TV running Windows 7 RC and it worked perfectly until about a week ago when I upgraded my laptop to Windows 7 and placed them both in the same Homegroup. Every since then the Media Center will not enter standby mode either automatically, after 10 minutes as configured or from the MC remote control. To get it to enter standby I have to select "sleep" from the WMC "tasks" menu.
As it only happened since creating the Homegroup I am assuming it is something to do with that, but I may be wrong. The MC PC is set to the "Balanced" power profile.
