Automatically Choose Start Windows Normally In Case Of Hard Reset?
Aug 24, 2011
Is there a way to make windows automatically choose "start windows normally" in the case of hard resets? I have a USB monitor hooked to the system and it does not turn on until Windows loads. but if I hard reset by accident or some other reason I can't see the screen that asks what you want to do, this only can be seen when vga/dvi is connected. I know there is a timer for the start normally, but wanted to know if there was a way to make windows not even have to ask and just know to start normally?
In the past perhaps month or two, my computer has started crashing. It happens on start-up after the computer has been off for more than a few hours- about 3 minutes after launch, it freezes- screen first, and then the audio seems to continue briefly before going silent, or looping the last few seconds of sound. After a hard reset, I can start in normal mode and everything is fine- no more crashes, until the next time I shut down/start up (normally this is happening each morning after I have shut down the night before).I read through some info I was able to find on here and (techsupportforum)- I have checked the action center, and there is an entry for each hard reset, "Kernel-Power Event ID 41 Task Category (63)". I have read that this does not actually indicate anything but that I had to do a hard reset. The recurring issues/suggestions I have seen consist of 3 thoughts: 1. PSU is dying, 2. video card or processor are overheating, or 3. multiple audio drivers. I know my video card does run warm, but it isn't into critical temperatures (I have installed an application to monitor the temperature, which I will run from time to time- especially while running illustrator/photoshop/dreamweaver simultaneously, or while playing graphics-intense games [rift, e.g.]). The PSU could be it but I'd rather check on the audio driver situation first.
[CODE]When I go into Device Manager, there is an entry under "Sound, video and game controllers", called "High Definition Audio Device". Under "System Devices", there is an entry called "High Definition Audio Controller". Is this a conflict? Also, when I go to Volume Control Options from the task bar, "Sound devices" lists:Headphones, Speakers, and then two different entries for "Digital Audio (S/PDIF).I really have no idea what the issue is, but it is getting frustrating, and I feel like the audio scenario is the most likely.
We have Windows 7 on one of our office computers. However, I cannot figure out how to get the computer to automatically choose the appropriate program to open files. Every time we get a file in with a new extention, we have to browse and look for the program..
How can i remove my Western Digital CASE i want to take the hard disk and plug it into my Pc and see if i can view my files cause i don't want to lost them
I am running windows 7 on my Toshiba Satellite laptop. I am try to connect a Western Digital 750GB internal SATA disk in an external enclosure via usb. I can find the drive in system management but not in my computer. If I put my pci adapter card in a desktop or tower, and hook the WD drive internally, it shows up right away. How can I get it to work via usb?
When I start up my computer I have a black screen show up.... I then have to choose between two windows 7 which are highlighted....
I can enter down and go to safe mode or other options. I do not know why this is happening on each start-up.
I think perhaps there are still two copies of the windows 7 Operating system on the computer. I had to do a reinstall and I assume one was not removed.
I use an WD external hard drive (1TB) for additional storage and it was working fine with no issues. The small USB connector broke off the board yesterday and I purchased a new enclosure and installed it. Now my computer does not recognize it as a storage device. I have all the data still on the HD and really do not want to loose it. I tried adding a letter for the drive, but it does not show up to change the letter of the drive.
I recently somehow got a nasty virus into my lappy. It was extremely weird since I just bought a new anti-virus (Norton, to be exact) and my PC became super slow. I recognized signs of viruses and I decided to wipe the PC clean. My friend gave two Windows 7 DVDs. However, even after making DVD the first boot order at BIOS it just doesn't work. My DVD rom makes really nasty sounds and it waits on a black screen for a bit and then it shows me to choose safe mode or start normally.
Basically, my PC has always read DVDs (logo on it confirms it). Also, Rom itself isn't broken, other discs like the Norton one work fine. Since the DVDs my friend gave me were DVD R- and DVD RW. Later, I got yet another disc which was DVD R+ but it STILL didn't work. My PC doesn't recognize the DVDs even normally, through My Computer. Did the viruses ruin my drivers or something? My rom always read DVDs but why make weird noises now?
Yi pay about 30$ a mounth for a 300 kbit 5 gig traffic internet.But,it is free from 3 to 7pm.and I should download my heavy files in these hours.The thing is: I have to set a new username and password for this free internet.and changing the username and password needs a restart of my modem.I set my computer to turn on at 3pm.I set the public free user name and password in my modem before i go to sleep(note that it only connects to the internet at 3pm and AFTER I reset the modem)And IDM will automatically resume my unfinished downloads at 3:05 pm.So what I have to do is to wake up at 3 and retart the modem.Is it possible(with a program or anything) for me to have my computer go to my browser,enter the modem(by going to 192.168.1.1),enter the username and password and retart the modem?
I'm doing a clean install on my computer, and it's going alright until it asks me to choose which hard drive I want to install Windows 7 on. Apparently I have 2: a C drive and a D(Recovery) drive.What should I do in this situation? Should I just install on the C drive, or should I do what it says here: Partition the Hard Drive in a Windows 7 Install and delete the partitions and create a new one.
I know there is a setting to choose or not to choose specific countries, but I don't know how.(Yes, Europe is not as free as you think and you need to change your identity to view what third world countries can view!)
I have Dell Inspiron 1545,when I start laptop it says windows is loading,it takes sometime and runs start up repair, which fails to fix problem automatically and shutdowns the machine.It's windows 7 home basic 64 bit.I don't get complete system recovery option other than start up repair option.When I go for advanced boot up option - F8, all options comes but whatever option I take whether computer repair,safe mode,safe mode with networking,safe mode command prompt,restore to last known good configuration,it does the same thing loading windows and then run startup repair.In logs I see courrpted registry error message.I did diagnostic test, it passes all test, I have windows 7 professional iso DVD burned which I am using to boot, since my installation disc came with laptop is not working at all.I don't have iso for windows 7 home basic.
I was booted into Windows a couple of days ago, when without any reason what soever, I was logged off, and had to log in again. I checked Event Viewer, which showed: "The Desktop Window Manager was unable to start because a composited theme is not in use."
My computer will randomly reset itself and reboot from DOS and back to windows again. These intervals would range from 5 mins from startup to 3 hours or more so they are completely random. This has been happening for 1 year now. Recently the intervals have been getting shorter and shorter to the point where my computer will reset upon 2-5 min of start up after hitting windows guaranteed. I get no error messages or indications that it is about to happen. Normally I'd jump on the overheating bandwagon but the strange thing is, my computer does not reset ever if I am playing a graphics intensive Video Game (battlefield 3 to name one).
It only resets if I'm not really doing anything intensive such as word processing or browsing the web or watching a movie. All these simple tasks will cause my computer to reset after a random time period. Anything where my CPU/GPU churns into motion prevents these resets. This I cannot explain. A problem which also happens (and I feel might be related to cause this) is that if I ever shutdown my computer, it will not boot (windows cannot load). And I have to system restore to get my computer to run again. So I have never hit the shutdown button in a long time.
I can't find how to start up a program automatically when the computer comes on. It was easy under Win xp but I can't find the command.When I go to msconfig I can see the programs that are loaded but don't see how to list a program to be started.
I recently have installed and uninstalled apache server in order to make it work, now I use XAMPP which SUPPOSEDLY starts the service manually when opened. However since I have installed it, windows is taking a long time to show the desktop when booting. It says Welcome for a while, then a black screen and finally the desktop is shown.Is there a way to set showing the desktop the number 1 priority ?
I have a small utility that I need to run at startup, but it has a password. I have dragged the utility to the startup folder, so that part is fine for when Windows 7 boots, but does anyone know how to have the password input as the software starts?
I a machine with Win 7 (Utlimate) with several users (lets call them A,BC..). I have installed MS Virtual PC on it and have 3 Virtual Machines (all Win 7s - lets call them X,Y and Z).
I want to know is it possible that if User A logons on, VPC X gets fired automatically, if User B logons, VPC Z gets fired?
I have recently purchased an old off-lease HP Compaq dc7700p to use as a backup desktop. I loaded Windows 7 64 onto it and everything seems to be functioning normally aside from a peculiar problem. Every time the PC restarts, it will hang on a blank black screen after POST. I have to hold down the power button for a hard reset, after which it will boot normally.
What I need to do is turn on a Windows 7 computer every hour for about five minutes and then turn it off again automatically; while the computer is on I have to run a macro. The cycle described before has to be repeated 24 hours, so, the computer is automatically turned on, it automatically runs the macro and when the macro ends, it goes off again 24 times per day. When I say �turn off� I mean, either turn off the computer or send it to a low energy consumption state like hibernation or sleep� Basically I know how to automatically turn off the computer and turn it on once per day using the BIOS setup, but I don�t know how to do this several times in a day automatically and then call the macro every time�
I would like to know if is possible to show All Programs in the start menu automatically when you click the orb. Because clicking every time to show the list of All Programs is not very nice since I don't use the recently programs open function.
Screensaver wont start automatically.I just reinstall Window 7 64-bit Professional.Everything appeared to be working until I did window update. Any clues?
This issue is bugging me for some time.Does anyone know how to stop mouse keys from starting on their own on startup?This happens since I first used them on this pc.I did try turning them off before logging off,but it didn't work.It's not something serious,but the icon confuses me.
I have an Asus G73JH-BST7 Laptop and recently it's been freezing. For the past two months it has had issues with programs hanging for 1-3 minutes then quickly responding again. About a week ago the laptop began to freeze and wouldn't come back and would required a hard restart. I decided to make use of my warranty and took it into a geek squad store. They told me they ran chkdsk and "other" tests to check the HDD and it passed all the tests and they couldn't "Replicate" the problem. So, I took the laptop back and it's still hanging/freezing. Whats the best way to go about diagnosing this?
black screen usually no errors just a black screen sound will lag and freeze up have to hard reset it no blue screens usually here is the latest mini dump file.
this is the latest mini dump file most the time my comp never blue screens just hangs black so i never knew there was mini dump files still coming in and i have a bunch of those but this is the latest one.
had a driver issue a while back was getting blue screens from it but i completely erased it out of drivers folder and win32 drivers folder which was locked but i used a reg editor here that made it possible to take ownership of a folder and then i completely deleted it out of my system so i think.
I can run World of Warcraft and Battlefield 3 at max settings and NOTHING happens. Runs like a dream. However if I play any over games such as Skyrim or the Witcher 2 my computer will completely crash to a black screen and then a weird buzzing noise which lasts 1-2 seconds. It will then require a hard reset.
This crash only happens when I play video games and it seems adjusting the settings doesn't seem to change anything. High or low settings it will still crash. I have ruled out Temperature I think. At it's hottest my GPU will be at about 55C.
My Specs- Operating System: Windows 2.6.1.7601 (Service Pack 1) CPU Type: Intel® Coreâ„¢ i7 CPU 960 @ 3.20GHz CPU Speed: 3.2 GHz System Memory: 7.99 GB Video Card Model: NVIDIA GeForce GTX 580 Video Card Memory: 3.97 GB
Yesterday I got this virus, I went and bought trend micro titanium and cleaned it up (was using a free30 day trial of something else) but I'm still having a problem. Whenever I go to shut down or restart my computer, it starts doing it like normal, but right at the end I get this blue screen with a bunch of messages written, it last about 5 seconds while a countdown happens at the bottom of the screen, then it restarts (even if I went Shutdown).
Sometimes minutes after I log back into the user, the blue screen comes up out of nowhere, does it's 5 second odd countdown and restarts. I should get minidump files. The countdown at the bottom of the blue screen is called "crash dump" or something like that. With the virus whenever I tried to open an internet explorer or google chrome window, all that would come up was "win 7 home security", I'm not getting that anymore though after doing the full scan with trend.
Additional info: I have windows 7, my pc is a HP Pavilion laptop, model number is DV6 - 2144TX
I have a new monitor, and also a new USB to RS 2343 converter cable that both came with a CD that apparently has Drivers for the devices on them.
They don't start automatically in auto-play to load, and my reading of the file labels in the CD makes no sense to me.
So, with the CD in the drive just sitting there, what do I do to actually get the PC to recognize the Drivers in the Folder(s), and load them in the appropriate places ?
Why do some devices (mainly external disc drives) automatically open autoplay whilst some I have to open "my computer" and select "open autoplay.And some automatically start playing my selected autoplay option!
