I am running windows 7 on my Toshiba Satellite laptop. I am try to connect a Western Digital 750GB internal SATA disk in an external enclosure via usb. I can find the drive in system management but not in my computer. If I put my pci adapter card in a desktop or tower, and hook the WD drive internally, it shows up right away. How can I get it to work via usb?
View 1 RepliesI use an WD external hard drive (1TB) for additional storage and it was working fine with no issues. The small USB connector broke off the board yesterday and I purchased a new enclosure and installed it. Now my computer does not recognize it as a storage device. I have all the data still on the HD and really do not want to loose it. I tried adding a letter for the drive, but it does not show up to change the letter of the drive.
View 3 Replies View RelatedI am running windows 7 home 64 bit (build 7600). I have a gateway fx7026. It has two internal hard drives. When I look under device manager they are both listed and they are both listed under the bios menu. When I look in my computer though under hard disk drives it only shows the one that I have the OS on. When I had Vista it showed both of them. Is this something I should be worried about. The drives are listed as WDC WD3200AAJS-22B4A0 DRIVE 1 and WDC WD3200AAJS-22B4A0 DRIVE 0.
View 7 Replies View Relatedhow can i make a backup/ system image for my internal and external hard drives at the same time?
View 4 Replies View Relatedcan u backup your data (or an system image)to an internal and external hard drives at the same time?
View 1 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedHow can i remove my Western Digital CASE i want to take the hard disk and plug it into my Pc and see if i can view my files cause i don't want to lost them
View 9 Replies View RelatedIs there a way to make windows automatically choose "start windows normally" in the case of hard resets? I have a USB monitor hooked to the system and it does not turn on until Windows loads. but if I hard reset by accident or some other reason I can't see the screen that asks what you want to do, this only can be seen when vga/dvi is connected. I know there is a timer for the start normally, but wanted to know if there was a way to make windows not even have to ask and just know to start normally?
View 1 Replies View RelatedI can see my external hard drive in device manager, but not in my comp
View 3 Replies View RelatedI had a 2 TB, and 3TB Seagate Go HDs and decided they would be best used as internal drives, turns out they both crashed completely upon SATA connection in the motherboard, I first guessed probably due to the difference in boot record. Upon reformatting in NTFS, I have found that the drives run very sluggish, I have been debating on just buying a new USB drive and copying my files, then getting rid of these 2 HDs. This doesn't make sense to me as I used to think all HDs were the same, does anyone know any reason why these 2 external drives are killing my system performance after they were made into internal drives (also why would they completely crash before).
View 1 Replies View RelatedI took out my internal optical drive from my Sony Vaio F13 laptop and put in SSD. Now I bought USB/SATA cabel and I connected the optical drive to the laptop, it is recognized in windows but it is treated as a hard drive (or removable disk). When I double click it in My Computer it says "Insert a disk into Removable disk. Is there a way to make my optical drive work via USB like this?
View 3 Replies View Relatedusing Windows 7 here. I have a folder on one of my internal HDs that I am frequently changing and adding to for a project I am working on. What I am used to doing, is just dragging the folder to an ext HD for bu.Is there a way to do Incremental backups here? So if I bu on Mon to the ext HD, and make some additions on Tues and Wed, come Wed eve I don't want to have to figure out what is new. Can an incremental backup be utilized here?
View 7 Replies View RelatedI have a Rosewill RX-DU100 Sata drive dock. Whenever I plug a HD into it on any of my Windows 7 Pc's, it shows up as an internal drive. That's great for me as I use Carbonite and they only backup internal drives. I was wondering why Windows 7 sees it as an internal and I could fool Windows into thinking other drives were internal as well?
View 4 Replies View Relatedhow to install windows 7 on an external HD (enclosure plugged via USB) in order to use it as primary internal HD.
View 2 Replies View Relatedmy machine is unstable IRQL NOT LESS OR EQUAL
View 7 Replies View RelatedRecently took out my laptop HDD and formatted it, NTFS format, and stored stuff on it. Now when I place that in an enclosure and want to use it as an external HDD drive, it doesn't pick up the device. Through Diskpart I am able to give the drive a letter and access it, but when I "Safely" remove device, the Drive letters remain....
- Do I need to do anything special to make the Device a Plug and Play?
- How do I remove the Drive Letters that I assigned through Diskpart from "My Computer"?
don't want to buy an expensive external optical drive so am trying to think of how to make a sata or ide internal optical drive into an external one for emergencies.anyone know if i can get adaptors for the power and data connections?have googled but no luck.oops found some build ideas on Internet - should have looked there first i suppose
View 5 Replies View Relatedis it possible to boot windows directly from external HDD, not internal disk? (i have WD 500G) (because my internal disk is damaged..)i decided to install win 7 in the external HDD.
View 9 Replies View RelatedI've googled this and found heaps of people having the same issue, but nothing that actually resolves it. I'm using a laptop with internal wifi but I also have an external wifi dongle as I connect to my neighbours internet (I have permission and the passwords, etc). Both the internal and external used to work fine and both would have internet connection. But something recently has changed and now the internal wifi still works with both network and internet connection, but the external one only has network connection and no internet connection.The reason I use the external one is it gives much better signal strength than the internal one and, as said, both used to work just fine.Now I've tried uninstalling the external drivers and dongle and reinstalling it but no dice. I've tried doing the netsh stuff people have recommended in some of the search pages but no dice. Tried release and renew of IP, but no dice. I've disabled all firewalls but no dice (and I figure the firewalls would stop both connections anyway but I thought I'd try it
View 7 Replies View Relatedevery time i press fn + f8 & choose the bluetooth option it doesn't respond , & when i choose enable bluetooth from the "right click on the taskbar bluetooth" button this message pops up:[ Power could not be supplied to the internal bluetooth module, Make sure that the wirless communication Switch is set ON. ]what's the "wirless communication Switch" is , & how to switch it on?
View 2 Replies View Relatedi have a toshiba satellite l755 and i need to know if i have bluetooth.
View 1 Replies View RelatedWhen I try to run an RS private server, (which runs using java), It says this. I have attempted to make a path in my system variables, i named it "Java" and put it as C:Program Files (x86)Javajre6in and it still does not work.
View 2 Replies View RelatedI installed a second hard drive on my Windows 7 Dell desktop. The drive is a Seagate Barracuda ST3000DM001 3TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive Bare Drive. It's only showing up as 746.39 GB Unallocated.
View 13 Replies View Relatedfor some reason my internal hard drive after installing it and reinstalling windows 7 it does not show up for some reason... I have check the cords to make sure they are in correctly
My Boot menu says it's there but my OS does not see it?
I upgraded from Win XP to Windows 7 64 bit about a month ago (I did a clean install as I've always had issues with in place upgrades). My machine has four hard drives total, two internal SATA drives, and two external USB drives. For some reason my secondary internal drive, a WD 500 GB SATA drive (nothing fancy), keeps disappearing randomly while windows is running. This started about a week ago, it ran ok for the first 2 weeks or so.The drive comes back fine and dandy if I completely shut down the machine and then boot it back up. The drive stays until some random moment when Windows doesn't see it anymore. Now, if I do a simple Restart the drive doesn't show up, ONLY after I shut down completely, and push the power button back on, does this work. There is nothing in the System logs, no error messages, nothing, it just vanishes and is completely random.
View 4 Replies View RelatedI want a software to put password on internal harddisk...i cant find any software for it...
View 1 Replies View Relatedmy problem is that sometimes when i turn on my computer i only have 1 dvd drive( i have 2 installed+3 other internal harddrives), and my primary disc that i have my os on. this does not happen when i use another harddrive with same os on, so i think it have to be driver sort of problem. they have never disappeared in bios, only in Windows 7 on 1 of the discs with os. does anybody know a fix for this? i really dont want to reinstall/wipe my disc. and i have both checked the cables an even switched them to new ones, still showing in bios but not in os. if it were only 1 drive i might consider it dying, but when it's 3 drives witch all pass chkdsk+dvd drive it must be something else? this is a almost new selfbuild pc so i know everything inside is OK.
View 5 Replies View RelatedLet me say first that I am not dual booting. I have a 250gb Internal SATA drive, and a 800gb internal SATA drive. Both hooked up and ready to go.What I want to do, and am unsure if it's possible, is to install Windows 7 64bit on the 250gb drive, and thats IT. I want to boot from that drive, but everything else I want to go onto the 800gb drive.I haven't done this yet but I get the feeling that if I were, when it boots from the 250, things that I download and install would always try and add themselves there. And I dread of having to manually move downloaded files and redirect installed programs every time.
View 2 Replies View RelatedCan I use a Windows Home premium upgrade version to install a clean 32 or 64 bit Win 7 on another internal hard drive?
I currently have Vista HPrem 32 bit on C drive and PC is 64 bit capable. As I use PC in home office I am not ready at this time to perform any upgrade/clean install on the C drive
I want to make sure I can dual boot if it can be done.
I have had my Windows XP updated to Windows 7 by a computer tech. He promised 250 GB internal hard drive but I only received 80 GB. He installed an E Drive with 465 GB. Is 80 GB enough for Windows 7? Also, what can be manually stored in the E drive?
View 2 Replies View Related