I have a Rosewill RX-DU100 Sata drive dock. Whenever I plug a HD into it on any of my Windows 7 Pc's, it shows up as an internal drive. That's great for me as I use Carbonite and they only backup internal drives. I was wondering why Windows 7 sees it as an internal and I could fool Windows into thinking other drives were internal as well?
Why do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive.So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive?Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file individually?
Why do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive. So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive? Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file, individually, would be ideal.
I took out my internal optical drive from my Sony Vaio F13 laptop and put in SSD. Now I bought USB/SATA cabel and I connected the optical drive to the laptop, it is recognized in windows but it is treated as a hard drive (or removable disk). When I double click it in My Computer it says "Insert a disk into Removable disk. Is there a way to make my optical drive work via USB like this?
I don't have Windows 7 yet, but I'm just about to install it, but I figure it may be safe to do a back up first. I'm about to do an upgrade from Vista 64-bit to Windows 7 64-bit. I did find these recommendations:"An image backup of your hard drive offers an easy, dependable way to do just that, since it restores everything on the hard drive: Windows, applications, data, and even the Master Boot Record. To create one, you'll need an external hard drive, and an image backup program.
don't want to buy an expensive external optical drive so am trying to think of how to make a sata or ide internal optical drive into an external one for emergencies.anyone know if i can get adaptors for the power and data connections?have googled but no luck.oops found some build ideas on Internet - should have looked there first i suppose
I have just bought a new computer and am running win 7.The C drive is fine but my external drive Maxtor 500gb connected by USB, is showing 465gb as used space when this is empty.In Disk management th drive is shown as 16gb, but in defrag screen the full 500gb are shown,what is using the 464gb that is empty?My previous computer running XP was showing the external drive correctly!
I got a problem, my external hard drive (westen digital 1.0TB) isn't popping up my computer. I can see it in devices (USB to ATA/ATAPI bridge) but i can't acces it.What i've done already:Computer Management-> Disk Management. Than ive to initialize the disk, i can choose between MBR and GPT. In both cases i got the error: Data error (cyclic redundancy check). I can't chance any letter Downloaded different programs but non of them worked
I have a 500gb seagate external hard drive, and already used 240gb space. It worked fine until yesterday suddenly i could not access the files at all. I checked disk management, and it showed that my external drive became RAW drive. I tried to do chkdsk that I learned from one of the forum, and then it somehow has fixed the RAW drive back to FAT32. However I still cannot see any of my files. I opened command prompt, and typed in dir /a and it said 0 files 0 bytes, 4 DIR 288,714, 293, 248 bytes free. How can I bring my files back?? I don't want to lose my files.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I had a 2 TB, and 3TB Seagate Go HDs and decided they would be best used as internal drives, turns out they both crashed completely upon SATA connection in the motherboard, I first guessed probably due to the difference in boot record. Upon reformatting in NTFS, I have found that the drives run very sluggish, I have been debating on just buying a new USB drive and copying my files, then getting rid of these 2 HDs. This doesn't make sense to me as I used to think all HDs were the same, does anyone know any reason why these 2 external drives are killing my system performance after they were made into internal drives (also why would they completely crash before).
using Windows 7 here. I have a folder on one of my internal HDs that I am frequently changing and adding to for a project I am working on. What I am used to doing, is just dragging the folder to an ext HD for bu.Is there a way to do Incremental backups here? So if I bu on Mon to the ext HD, and make some additions on Tues and Wed, come Wed eve I don't want to have to figure out what is new. Can an incremental backup be utilized here?
I am running windows 7 on my Toshiba Satellite laptop. I am try to connect a Western Digital 750GB internal SATA disk in an external enclosure via usb. I can find the drive in system management but not in my computer. If I put my pci adapter card in a desktop or tower, and hook the WD drive internally, it shows up right away. How can I get it to work via usb?
Recently took out my laptop HDD and formatted it, NTFS format, and stored stuff on it. Now when I place that in an enclosure and want to use it as an external HDD drive, it doesn't pick up the device. Through Diskpart I am able to give the drive a letter and access it, but when I "Safely" remove device, the Drive letters remain....
- Do I need to do anything special to make the Device a Plug and Play? - How do I remove the Drive Letters that I assigned through Diskpart from "My Computer"?
is it possible to boot windows directly from external HDD, not internal disk? (i have WD 500G) (because my internal disk is damaged..)i decided to install win 7 in the external HDD.
I've googled this and found heaps of people having the same issue, but nothing that actually resolves it. I'm using a laptop with internal wifi but I also have an external wifi dongle as I connect to my neighbours internet (I have permission and the passwords, etc). Both the internal and external used to work fine and both would have internet connection. But something recently has changed and now the internal wifi still works with both network and internet connection, but the external one only has network connection and no internet connection.The reason I use the external one is it gives much better signal strength than the internal one and, as said, both used to work just fine.Now I've tried uninstalling the external drivers and dongle and reinstalling it but no dice. I've tried doing the netsh stuff people have recommended in some of the search pages but no dice. Tried release and renew of IP, but no dice. I've disabled all firewalls but no dice (and I figure the firewalls would stop both connections anyway but I thought I'd try it
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
When I try to run an RS private server, (which runs using java), It says this. I have attempted to make a path in my system variables, i named it "Java" and put it as C:Program Files (x86)Javajre6in and it still does not work.
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
i have this problem whereby whenever i resume the computer from sleep, the dvd drive disappear from "my computer" and device manager. It could not be detected as well. All the hard disks were detected.
The only way was to restart the computer.
The dvd drive is connected via the IDE cable to the mobo , using the Jmicron IDE/Raid chipset.
After numerous attempts, Windows install keeps stalling at the "expanding Window's files" screen, then cancels the install. (Bios checks ok, disk has no scratches, and both DVD writers return the same results.)To help prove the integrity of the SSD (still under warranty) I would like to now try doing a temp OS install on another internal HDD. There are 2 of those, each with data on them. Each HDD has only one large partition, as in drive D & drive R.What is the detailed procedure in preparing one of those HDDs in order to accept a temporary OS install, while still preserving the existing data on that physical disk? I must also be able to identify which disk is which (new partition?) when it comes to finding the "new" disk when loading the Windows 7 install software?
I installed a second hard drive on my Windows 7 Dell desktop. The drive is a Seagate Barracuda ST3000DM001 3TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive Bare Drive. It's only showing up as 746.39 GB Unallocated.
for some reason my internal hard drive after installing it and reinstalling windows 7 it does not show up for some reason... I have check the cords to make sure they are in correctly
My Boot menu says it's there but my OS does not see it?
I upgraded from Win XP to Windows 7 64 bit about a month ago (I did a clean install as I've always had issues with in place upgrades). My machine has four hard drives total, two internal SATA drives, and two external USB drives. For some reason my secondary internal drive, a WD 500 GB SATA drive (nothing fancy), keeps disappearing randomly while windows is running. This started about a week ago, it ran ok for the first 2 weeks or so.The drive comes back fine and dandy if I completely shut down the machine and then boot it back up. The drive stays until some random moment when Windows doesn't see it anymore. Now, if I do a simple Restart the drive doesn't show up, ONLY after I shut down completely, and push the power button back on, does this work. There is nothing in the System logs, no error messages, nothing, it just vanishes and is completely random.