is it possible to boot windows directly from external HDD, not internal disk? (i have WD 500G) (because my internal disk is damaged..)i decided to install win 7 in the external HDD.
View 9 RepliesI have a WD external hard drive - I would like my computor to download files (as backup) directly.
View 2 Replies View Relatedhow to install windows 7 on an external HD (enclosure plugged via USB) in order to use it as primary internal HD.
View 2 Replies View RelatedI have a windows 7 ultimate x32 installed on the C partition ... I've installed Ubuntu 11.04 on an other partition D it was ok but when I've restarted the computer it loads Windows 7 directly so I would like to know how to add Ubuntu to the boot list.
View 7 Replies View RelatedAfter taking my hard drive and placing it from my good rig into my bad rig, my bad rig won't boot off of the hard drive, at first it was giving me bsod 0x0000007b, but now it won't even BSOD, it just restarts, tries to boot, does the animated logo for about two seconds, and then switches to Windows is now loading files, and then goes to restarting but then pulls up the startup repair / boot normal screen, now of course both of these do the same thing and just keep me in an endless restart loop
View 2 Replies View RelatedI had a 2 TB, and 3TB Seagate Go HDs and decided they would be best used as internal drives, turns out they both crashed completely upon SATA connection in the motherboard, I first guessed probably due to the difference in boot record. Upon reformatting in NTFS, I have found that the drives run very sluggish, I have been debating on just buying a new USB drive and copying my files, then getting rid of these 2 HDs. This doesn't make sense to me as I used to think all HDs were the same, does anyone know any reason why these 2 external drives are killing my system performance after they were made into internal drives (also why would they completely crash before).
View 1 Replies View RelatedI like to know if you can boot into Windows 7 and get directly to desktop if you have more then 1 user account? In other words can you by-pass having to choose a user account everytime you boot up?
View 1 Replies View RelatedI took out my internal optical drive from my Sony Vaio F13 laptop and put in SSD. Now I bought USB/SATA cabel and I connected the optical drive to the laptop, it is recognized in windows but it is treated as a hard drive (or removable disk). When I double click it in My Computer it says "Insert a disk into Removable disk. Is there a way to make my optical drive work via USB like this?
View 3 Replies View Relatedusing Windows 7 here. I have a folder on one of my internal HDs that I am frequently changing and adding to for a project I am working on. What I am used to doing, is just dragging the folder to an ext HD for bu.Is there a way to do Incremental backups here? So if I bu on Mon to the ext HD, and make some additions on Tues and Wed, come Wed eve I don't want to have to figure out what is new. Can an incremental backup be utilized here?
View 7 Replies View RelatedI have a Rosewill RX-DU100 Sata drive dock. Whenever I plug a HD into it on any of my Windows 7 Pc's, it shows up as an internal drive. That's great for me as I use Carbonite and they only backup internal drives. I was wondering why Windows 7 sees it as an internal and I could fool Windows into thinking other drives were internal as well?
View 4 Replies View RelatedIs there a way to have Windows 7 boot direclty in Windows Media Center?
View 1 Replies View RelatedI am running windows 7 on my Toshiba Satellite laptop. I am try to connect a Western Digital 750GB internal SATA disk in an external enclosure via usb. I can find the drive in system management but not in my computer. If I put my pci adapter card in a desktop or tower, and hook the WD drive internally, it shows up right away. How can I get it to work via usb?
View 1 Replies View Relatedmy machine is unstable IRQL NOT LESS OR EQUAL
View 7 Replies View RelatedRecently took out my laptop HDD and formatted it, NTFS format, and stored stuff on it. Now when I place that in an enclosure and want to use it as an external HDD drive, it doesn't pick up the device. Through Diskpart I am able to give the drive a letter and access it, but when I "Safely" remove device, the Drive letters remain....
- Do I need to do anything special to make the Device a Plug and Play?
- How do I remove the Drive Letters that I assigned through Diskpart from "My Computer"?
don't want to buy an expensive external optical drive so am trying to think of how to make a sata or ide internal optical drive into an external one for emergencies.anyone know if i can get adaptors for the power and data connections?have googled but no luck.oops found some build ideas on Internet - should have looked there first i suppose
View 5 Replies View RelatedI've googled this and found heaps of people having the same issue, but nothing that actually resolves it. I'm using a laptop with internal wifi but I also have an external wifi dongle as I connect to my neighbours internet (I have permission and the passwords, etc). Both the internal and external used to work fine and both would have internet connection. But something recently has changed and now the internal wifi still works with both network and internet connection, but the external one only has network connection and no internet connection.The reason I use the external one is it gives much better signal strength than the internal one and, as said, both used to work just fine.Now I've tried uninstalling the external drivers and dongle and reinstalling it but no dice. I've tried doing the netsh stuff people have recommended in some of the search pages but no dice. Tried release and renew of IP, but no dice. I've disabled all firewalls but no dice (and I figure the firewalls would stop both connections anyway but I thought I'd try it
View 7 Replies View RelatedWhen I try to run an RS private server, (which runs using java), It says this. I have attempted to make a path in my system variables, i named it "Java" and put it as C:Program Files (x86)Javajre6in and it still does not work.
View 2 Replies View Relatedhow can i make a backup/ system image for my internal and external hard drives at the same time?
View 4 Replies View Relatedcan u backup your data (or an system image)to an internal and external hard drives at the same time?
View 1 Replies View Relatedwhenever I turn on the laptop, it seems to boot into Windows 7, in that the "Starting Windows" text appears and the little animation of colors forming the logo shows, but as some point it fails. This message appears on screen:autocheck not found - skipping AUTOCHECK After a few seconds a BSOD shows up, but too fast for me to make out what it says. It used to, but after some hasty fix attempts no longer does, cycle around to a menu that informed me of this error:Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible. Here's the longer history:As some point in the past I decided to try out dual-booting Windows 7 and Linux on the laptop. I got it to a state where this worked fine. I had partitions roughly as follows:[Ubuntu][Windows 7]([Data and files][Boot]) The parentheses denote a logical partition. The Boot partition was very small and only held what was necessary to launch GRUB. This week, I realized that I hardly ever used the Linux partition and decided to get rid of it to reclaim storage space. This is where the trouble begins. I rebooted into a thumb drive that could run GParted and modified the hard drive layout in the following steps: Delete the Ubuntu partition Delete the Boot partition Grow the Data/Files partition to take up the space left by Boot Shrink the Windows 7 partition to make it faster to move Move the Windows 7 partition to the front of the volume Expand it to take up the remaining space. What I ended up with was: [Windows 7]([Data and files]) My naive and fatal mistake was to trust that the Windows Repair CD could fix any boot issues, and also that there would be no catastrophic hardware failures. Both of these assumptions turned out to be false.
First, the laptop's CD/DVD drive has either broken or is too unreliable to use. I have noticed it becoming more and more unstable over time, but now (when I need it most!) it simply does not seem to want to spin up and function at all. This forced me to create a Windows Repair USB drive. However, I can't load any installation media. This is because the laptop did not come with an install DVD. It had a recovery sector, which I cannibalized for the Linux partition. I did copy the stock recovery stuff to a series of DVDs, but, well...This is all to say that any solution that requires a DVD drive is straight out until I can replace it, which I'd like to consider a last resort.My expectations for the Windows Repair CD/USB have been dashed. Attempting to automatically fix boot issues either fails for some specific reason (I can probably reproduce it and provide the details, if necessary), with a dialog to send a report, or fails because it cannot detect any problems. I have tried a variety of things based on my own research to fix this through the command prompt: Running chkdsk /x /r on all drives. Does not find any errors. Running various bootrec commands: /fixmbr, /fixboot, /rebuildbcd, /scanos. All complete successfully, but the last 2 report finding 0 Windows installations. Using bcdboot and bootsect to recreate the bootloader. Again, no errors result, but it does not fix the issue. I guess it should have been obvious that none of the boot record fixes would matter, since the laptop does boot into Windows 7, briefly.
So I had the power go off while I was running bitlocker (to go?) on my external hdd. I was not able to pause it before this happened. I was also running BL on an internal drive. Both were interrupted. I was able to resume and finish the internal drive. I was not able to resume the external. The BL application just stop responding when I try to resume/unlock the disk. It also seems I can't restart the machine normally when BL is trying to unlock the drive.
I read somewhere on the ms support site that even with power failure, resuming is possible. This might have only applied to an internal drive. I do recall seeing the pause button for the external, with a note that I needed to pause to stop in case of data corruption or something like that. Is there a way to recover my external? Do I need to let the program "not respond" for the same time or maybe longer than the time it spent encrypting it? Could I remove the drive and make it an internal?
making the computer recognise the system drive by using command prompt in recovery options windows 7 dvd. In the recovery options there is no operating system apparently but i know for a fact it is there as i had been on my windows 7 fine until i restarted the comp and then the problems started.
So how can i get windows to recognise where the system partition is.
my PC is refusing to start up. It happened yesterday after the power had flickered, I turned off my computer because the battery it was hooked up to was yelling at me (due to the power flicker). On the startup, my PC just hangs after "Verifying DMI Pool Data", and then gives me the "DISKBOOT FAILURE, PLEASE INSERT DISC AND PRESS ENTER" to continue shenanigans.
I've cleaned out my computer and have tried unplugging my two external hard-drives, as well as going into the BIOS and making sure the boot order was correct. When I insert a Windows boot disc, it refuses to 'repair' my system because it says there's no specified OS to repair... I thought the problem was that it wasn't recognizing my actual hard-drive, but that doesn't seem to be the case, (I forgot how I got to it but,) it recognized that I had 183/500 GB of space left (as well as being able to view certain files.
I recently was able to get into DOS, where it's listing my main drive as "X:windows\system32". Could this be the problem? If so, how did it reassign it to "X: and why did it do that?!
I turned the laptop off by holding the power on button depressed for as long as it took to power down.I have done this many times before.This time the laptop will not start windows after power up. Win 7 offers 2 options, normal or startup repair.Both appear to run but stay on permanently and neither will start windows. Tried booting using the repair disk and laptop will not boot from CD. CD spins initially but without booting. Only thing I can see that is not normal is that after several seconds trying to boot the Disk led remains permanently on, at least to my eyes.I have removed the battery, powered up without the battery,tried different repair CD all to no avail.
View 3 Replies View Relatedhave an acer aspire one d257 netbook running windows 7 home starter. i had set boot password,hdd password and supervisor password from bios and as soon as i pressed F10 (save & exit) it showed that windows needs some start up repair. now the start up repair is going on and on and thre computer restarts finally it asked for sending problem to microsoft to which i clicked no.now the boot screen shows up and after that it shows windows is loading files and then it shows attempting system repair but the it restarts again and the whole process is repeated (it has happened for more than 5-6 times) .Is there a way i can do system restore (i neither have a dvd drive nor i have a windows dvd-the os came pre installed)
View 1 Replies View RelatedI have an acer aspire one d257 netbook running windows 7 home starter.i had set boot password,hdd password and supervisor password from bios and as soon as i pressed F10 (save & exit) it showed that windows needs some start up repair. now the start up repair is going on and on and thre computer restarts finally it asked for sending problem to microsoft to which i clicked no.now the boot screen shows up and after that it shows windows is loading files and then it shows attempting system repair but the it restarts again and the whole process is repeated (it has happened for more than 5-6 times) .Is there a way i can do system restore (i neither have a dvd drive nor i have a windows dvd-the os came pre installed) ?
View 1 Replies View Relatedmy name is saiju, my system consisting of 160gb storage,3gb ram.......... 4 year old..windows 7 operating system... But the problem is, if i start my computer, it showing 2 choices, one is launch startup repair another is start windows normally,, i can't repaire it.. So many time format it, but same problem continuing.
View 1 Replies View RelatedI just bought new a 60gb SSD and Win 7 64 bit OEM (microsoft official) and when I try to boot the install disk with the SSD connected to the mobo I get a message at boot saying that it failed to boot from the CD and to insert the CD then try again. Needless to say when I reinsert the CD it still says this message.
When I connect my other new HD drive I bought (Western Gate 500GB) the CD boots up the Win 7 install and I can install the OS on that just fine, but that drive is intended to be my secondary and my SSD my primary for the OS.
I set it in my bios so that it boots from my DVD drive first and even disabled booting from the hard disk at all. My SSD shows up in the BIOS, but for whatever reason Win 7 install just WONT work when I have that SSD connected to the mobo.
The SSD is brand new, never been used before. I have no idea if I got a faulty SSD or I'm missing a step somewhere when installing a new OS onto a new SSD?
I am running Windows 7 32 Bit Home Premium, and at random times the PC will shut down and come up with the BSOD. After I try to boot up the computer I get a message saying 'Disk Boot Failure Insert system disk and press enter. Most of the time the only way I can get it to boot up is if I open up the case and disconnect the hard disk and dvd drive and reconnect them. On the initial screen after pressing the power button, it'll take a while before it detects IDE drives. If I don't disconnect/reconnect them, then at the initial screen it will sit at that screen and will not detect any disk/dvd drive.Does anybody know a proper solution without having to disconnect and reconnect the hard disk/dvd drive as I think that this may not be a good idea?
View 4 Replies View RelatedI was among the 1.4 million SDG&E customers that lost power on Sept 8, 2011. At around 10:30PM the power came back on and I attempted to boot up my Win 7 machine (which was on at the time of the outage). It gets through POST, displaying the list of auto detected devices, clears that screen to black and then displays a flashing white caret on the black background and gets stuck there.Any ideas on how to restore without re-installing Win 7 (and everything else)?
View 3 Replies View RelatedI've just tried twice to install Win7 Service Pack 1 on a relative's Acer desktop PC - which runs ZoneAlarm anti-virus, but has very little else apart from Word installed. Each time, the download and install process seemed to go OK; however, when the system rebooted, it displayed the Windows startup logo, but at the point where the logo goes away and you expect to see the mouse appear, it just froze with a blank grey screen. I left it for a while, but nothing happened. Eventually, I power-cycled the PC and an error message was displayed and a Windows boot selection was offered: Repair (recommended) or Start Normally.
Choosing 'Start Normally' repeated the boot and freeze sequence. Choosing 'Repair' started the startup repair procedure, which failed with 'The operating System is incompatible with Startup Repair'. Trying the 'Advanced Restore' procedure reported 'No restore points', although I had explicitly created one before the update, and the update itself creates one. I managed to fix it by running 'Startup Repair from the original Windows 7 installation DVD. The PC works fine now, but Service Pack 1 isn't installed. I have had to turn off automatic updates so that it won't get installed. Failing that, is there a way to disable the 'Service Pack 1' entry in 'Windows Updates' so that automatic updates can be enabled?