Can I use a Windows Home premium upgrade version to install a clean 32 or 64 bit Win 7 on another internal hard drive?
I currently have Vista HPrem 32 bit on C drive and PC is 64 bit capable. As I use PC in home office I am not ready at this time to perform any upgrade/clean install on the C drive
I want to make sure I can dual boot if it can be done.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI installed a second hard drive on my Windows 7 Dell desktop. The drive is a Seagate Barracuda ST3000DM001 3TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive Bare Drive. It's only showing up as 746.39 GB Unallocated.
View 13 Replies View Relatedfor some reason my internal hard drive after installing it and reinstalling windows 7 it does not show up for some reason... I have check the cords to make sure they are in correctly
My Boot menu says it's there but my OS does not see it?
I upgraded from Win XP to Windows 7 64 bit about a month ago (I did a clean install as I've always had issues with in place upgrades). My machine has four hard drives total, two internal SATA drives, and two external USB drives. For some reason my secondary internal drive, a WD 500 GB SATA drive (nothing fancy), keeps disappearing randomly while windows is running. This started about a week ago, it ran ok for the first 2 weeks or so.The drive comes back fine and dandy if I completely shut down the machine and then boot it back up. The drive stays until some random moment when Windows doesn't see it anymore. Now, if I do a simple Restart the drive doesn't show up, ONLY after I shut down completely, and push the power button back on, does this work. There is nothing in the System logs, no error messages, nothing, it just vanishes and is completely random.
View 4 Replies View RelatedI have had my Windows XP updated to Windows 7 by a computer tech. He promised 250 GB internal hard drive but I only received 80 GB. He installed an E Drive with 465 GB. Is 80 GB enough for Windows 7? Also, what can be manually stored in the E drive?
View 2 Replies View RelatedI had a Windows XP OS that I used when I stored 15 gigs of data and photos on my iomega LDDHD-UP external hardrive. My internal hard drive crashed and I up graded to windows 7. The exxternal dive indicates all files are PBD files and I can't find the program to open or retrieve them .
View 2 Replies View RelatedWhen I turn on/restart the computer, the desktop itself has two hard drives in it (250GB and 1TB, 1TB is not the one the OS is on)
When I put the computer to sleep, and then wake it up, the 1TB is not active, and to access it I have to completely restart the computer. I'm using a legitimate retail version of Windows 7 Ultimate, if that helps any?
My relatively new Dell desktop power supply died so trying to retrieve my data (pictures and docs) off the internal hard drive. Hooked it up with an adapter I have used in the past which seems to work fine and I can see the drive when I look on windows explorer on my laptop. The only problem is the Windows 7 operating system is preventing me from access the data stating I don�t have security access or right to copy the data.
View 1 Replies View RelatedI'm running Windows 7 Pro 64bit (SP1) on my Small Business Computer.Three Internal Hard Drives: CDrive is OS, DDrive is Data, EDrive is Data.I would like to password protect both of my data drives. I want to have to enter a password to access ANY info on these drives.
View 6 Replies View RelatedI've recently uninstalled itunes. When i restarted my PC i noticed that my internal secondary drive was missing. Reboot and still nothing. Powerdown wait 30 sec and swjtch back on: still missing. I finally opened it up unplugged it and replugged it and it found it again.
I then rebooted again and again it was missing repeated steps above same result.
Dont know what to do ant its a hassle to open it up every time. Windows 7 ultimate. Sata Seagate barracuda 2tb
I have a dead laptop, I believe it was the hard drive, anyway. I took the hard drive out, connected it to my Network computer, all looks well, I heard it spinning (Good sign?) and then I booted the computer, it didn't actually load windows 7, it spent like a good 10-15mins saying "Loading windows 7" so I turned it off, moved the SATA cable to a different slot, it booted.. then when trying to detect the drive, it doesn't exist. I will need to format it, as it does have windows 7 on that drive aswell.
View 1 Replies View RelatedI've been running my current set up for roughly two years and it has been fine until recently. My secondary drive for programs, storage, etc. will just disappear. It does not happen on any set routine or anything, just randomly.If I restart I do not get the drive back, however, If I shut it down and plug the drive into a different port it recognizes it again. I've gone back to the same port numerous times so none of the ports are bad.
View 5 Replies View RelatedYesterday, I was browsing on my computer and heard a weird clicking noise when the CD drive was running. About a few minutes after that, Firefox froze so I did a hard reboot, and up comes this message:
"No boot sector on internal hard drive No bootable devices--strike F1 to retry boot, F2 for setup utility Press F5 to run onboard diagnostics."
I have no idea what it means, and I've been everywhere trying to do System Restore using the Windows 7 reinstallation disk, but unfortunately I couldn't create a restore point because my jump drive doesn't have enough space and Startup Repair couldn't solve my problem. I've even tried the bootrec.exe on Command Prompt but I had no idea what to do. This is the first time that this has happened to me. My laptop is a Dell Inspiron 1545 and I have Windows 7 Home Premium 64-bit.
I'm on a tight limb about this problem right now because my warranty expired in early June this year, and I don't have the money for them to look at it, let alone buy a brand-new hard drive.
I am running windows 7 home 64 bit (build 7600). I have a gateway fx7026. It has two internal hard drives. When I look under device manager they are both listed and they are both listed under the bios menu. When I look in my computer though under hard disk drives it only shows the one that I have the OS on. When I had Vista it showed both of them. Is this something I should be worried about. The drives are listed as WDC WD3200AAJS-22B4A0 DRIVE 1 and WDC WD3200AAJS-22B4A0 DRIVE 0.
View 7 Replies View RelatedI have a Dell Inspiron that is running Win7 Home premium 64 bit and I am getting an error message while booting up it states "No boot sector on internal hard drive. No bootable devices--strike F1 to retry boot". When I strike F1 it boots just fine.
View 9 Replies View RelatedIve got a samsung 1tb/5400rpm/8m) i need the driver to load in on insall of windows 7.
View 1 Replies View Relatedwindows 7 pro 64 bit does not detect any hard drives - i have 4 sata - new install?
View 1 Replies View Related2 weeks ago i replaced XP with Windows 7 Pro 64 bit on my PC and since then my D: drive randomly disappears. I have been using the PC which has 3 internal disk drives with XP for the past 3 years never having problems with the disk drivesSince i installed Windows 7 Professional 64 bit, the D Drive is dropped from time to timehen i look under device manager the disk is completely gone, and also if i go to command, diskpart, list disks .... it does not show up.
View 7 Replies View RelatedIt's a dell latitude, 1 year old. Laptop suddenly crashed and when the laptop booted it said: "no boot sector on internal hard drive". I tried repairing the boot sector with the windows repair function, but the hard drive is just empty... nothing to repair. Then I tried to boot off a ubuntu live cd. which worked. and showed me an empty hard drive with the_maximum_capacity_of_the_drive_GB of unallocated space.
Since that I reinstalled windows 7 two times, and stopped working after an hour or so. I installed ubuntu, which worked for several days. then i tried windows 7 again (clean install). And then I kept working on the laptop for a couple of hours until the "crash" happened. All the programs stopped working suddenly. When I opened anything I was shown this error: "Illegal operation attempted on a registry key that has been marked for deletion."
After that everything is lost if I turn the computer off. And I'm back at an empty unformatted hard drive. I changed the sata operation mode in the bios to different options before every installation of windows. I didn't try xp, because I don't have dell-xp cd's . Is the hard drive broken? I guess not because ubuntu works. and windows 7 also, but it just goes away suddenly... Here's a video (shot in portraitmode) of the event... [URL].
I am using a Dell Inspiron 14 laptop. A few days ago, I noticed that my laptop has become incredibly slow (the system will hang sometimes, and continue as per normal after a while), and this coincided with my laptop beginning to make this weird, sharp beeping sound. At first I did not pay much attention to it, but later this was joined by several BSODs, and my laptop became even slower (games that usually did not lag was now hanging halfway through, and continuing as per normal after a lengthy period of 1 minute or so). I tried to find the origin of the noise, and I think it came from my Internal hard drive sector, and thus decided to open the sector up (in hindsight I probably should not have). After I replaced it, without doing much (just doing the usual IT-amateur stuff, wiping it and blowing it a few times), my situation has now worsened to the point that startup takes a much longer time, and finally now it hangs at the "Starting Windows" screen, but without the Windows 7 logo showing, and my screen later turns black.
View 9 Replies View RelatedHow to Turn Windows 7 BitLocker On or Off for Internal Data Hard Drives ?
View 0 Replies View RelatedI have a Core 2 Duo PC with 2 SATA internal drives:
Seagate 320 gig, with C and D partitions. C contains a legit retail upgrade version of Vista Home. D is for data.
Western Digital 640 gig, with a single E partition, currently used as backup.
I ordered a Windows 7 Home Premium retail upgrade at the discounted price a few months ago and expect it in a month.
My Seagate drive is running low on space and I want to retire it. I would like to boot to the Win 7 DVD, have my Vista install on the Seagate recognized, and then do a clean install of Windows 7 on the Western Digital drive, currently E.
I hope to buy another considerably larger backup drive shortly to replace the Western Digital as a backup drive.
Will the WD drive be available as a location for the installation in these circumstances?
Any previous time I have installed MS operating systems, I always chose to install to the same drive as the existing OS. This time things are different due to little space on the Seagate drive. Windows 7 would certainly fit on my current C, but I want to retire that drive.
Or will this remain a complete unknown until some time after October 22?
Or will I be forced to install to the Seagate and then somehow migrate the install to the WD?
I have not played with the RC, so I don't know what options are normally presented during the install.
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.
My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)
I want a software to put password on internal harddisk...i cant find any software for it...
View 1 Replies View Relatedmy problem is that sometimes when i turn on my computer i only have 1 dvd drive( i have 2 installed+3 other internal harddrives), and my primary disc that i have my os on. this does not happen when i use another harddrive with same os on, so i think it have to be driver sort of problem. they have never disappeared in bios, only in Windows 7 on 1 of the discs with os. does anybody know a fix for this? i really dont want to reinstall/wipe my disc. and i have both checked the cables an even switched them to new ones, still showing in bios but not in os. if it were only 1 drive i might consider it dying, but when it's 3 drives witch all pass chkdsk+dvd drive it must be something else? this is a almost new selfbuild pc so i know everything inside is OK.
View 5 Replies View RelatedLet me say first that I am not dual booting. I have a 250gb Internal SATA drive, and a 800gb internal SATA drive. Both hooked up and ready to go.What I want to do, and am unsure if it's possible, is to install Windows 7 64bit on the 250gb drive, and thats IT. I want to boot from that drive, but everything else I want to go onto the 800gb drive.I haven't done this yet but I get the feeling that if I were, when it boots from the 250, things that I download and install would always try and add themselves there. And I dread of having to manually move downloaded files and redirect installed programs every time.
View 2 Replies View Relatedmy system is very slow.just now only i formated my system fully then also it is very slow.what is the reason.if i want to change my hard disk are any solving
View 4 Replies View Related
