Set Priority (on Process) With Script?
Mar 20, 2011Is there a way to set the priority of a process with a vbscript? If so, how? Say I want to set ProcessA to High and ProcessB to low.
View 1 Replies
ADVERTISEMENT
Can't Put Real-Time Priority To A Process
Oct 24, 2012I'm using Matlab daily and I am using it in Real Time and I have some isues, so my friend told me how to put it on Real Time priorty in Task Manager...
I tried but I god error message: Unable to set Realtime priority. The priority was set to High instead...
Save Process Priority And Affinity?
Dec 21, 2012I'm running a few gameservers myself on Windows Server 2008 R2 but I'm wondering if it's possible to make my system recognize that the process was ran earlier, and it'll apply the correct affinity and priority.
The problem is that I used to use ProcessLasso, but after 40 days of uptime (and then a restart) I'm not able to run the program without purchasing it.
Set A Process Automatically To Priority "lower Than Normal" On Its Start?
Apr 13, 2011I have a game (Battlefield 2) that has certain issues under Windows 7. In online gaming, apparently the punkbuster fails to communicate in the right way until the process bf2.exe is set to priority "lower than normal" in the task manager. this means you have to start the game, alt+tab back to the desktop, lower the priority in the taskmanager and then start playing.this procedure has to be repeated everytime i want to play with punkbuster (so every time )And yes, I browsed all, and I mean ALL, forums of BF2 and Punkbuster to fix this issue, so far this is the only solution that makes online gaming possible.how to lower the priority of a process permanently and automatically every time the process starts up?
View 1 Replies View RelatedProcess Cannot Access / File Because It Is Being By Another Process
May 3, 2012I am getting this error all the time with Windows 7. I open a text file I want to edit, then go to save my changes and I get this error:"The process cannot access the file because it is being used by another process".I have full admin rights, running Win7 Ultimate x64 SP1. From a bit of research I have seen where many others have been experiencing this problem or something similar too. The only "fix" (that doesn't work all the time) is to close explorer.exe and then restart it to "release the handle"? Anyway, this is not acceptable for all the money and time I spent upgrading/configuring this new OS from XP -where I never had this problem- and seriously cuts down my productivity.Has Microsoft even acknowledged this as a bug yet? I can duplicate this scenario the second or third time I try to edit/save/delete a text file and I know that explorer.exe is the problem or a big part of it in any case. I don't want to go back to XP x64 but having to deal with this headache 10-20 times a day is just too much to ask.The file here is a game's map script & has to be saved to a .pk3 and then loaded into the program's root before it can run so i know othing else is running the file. No apps running in taskmngr either.
View 13 Replies View RelatedWant To Change Priority Of Function Key?
Jul 19, 2011i am using Dell inspiron N5010 laptop, here i want to use directly function keys like F5,F8.... without pressiing FN key with that.
View 2 Replies View RelatedProcess Explorer Shows "error Opening Process"
Nov 9, 2012New dell n7110/win7sp1x64.At startup on new machine from dell, process explorer (procexp64.exe) lists 81 processes running (seems like way too many - compared to xp with maybe 25 at startup). But which processes I can turn off is a question for another day. OK, read carefully, at least 15 processes in PE show " Path: error opening process". PID, CPU, Private Bytes, and working set columns are shown for these "problem" processes, but nothing after that, ie, description, company name etc. For all other listed running processes (with known paths), all info is shown in all columns. The problem processes include some important ones, services, crss, ism, wininit, winlogon, that must to be working for the computer to work, and everything seems to be working properly, and no cpu spikes or other weird stuff is happening. Right clicking properties on these problem processes, properties window pops up as normal, but shows "version: n/a, build: n/a, path: error opening process, no command line, no current directory, autostart location: n/a, Parent: non existent process (708), user: access denied. Again, this info can not be correct since the computer is working. And then, after a few minutes, another window pops up and says PE has stopped working, and closes the program. Now, if this was the whole story, I would go to sysinternals with this, but read on... Task manager running simultaneously with PE lists 83 processes running, more processes than PE, and also ~5 different processes than PE, and PE lists some processes running that TM doesn't list. So PE and TM show different running processes at the same time. How can that be? For the processes that PE shows "error opening", e.g., crss, etc., when I click properties in TM for the same process, sometimes I get the usual/normal pop-up window listing the path, and all the other data as normal, suggesting the process is working properly. But sometimes when I click properties in TM for the processes that PE shows "error opening", I get no pop-up at all, nothing for that process. So, IMO, it's not just a PE glitch, something is actually wrong here. This is a new machine, with PE the only 3rd party installation. I have installed several dell driver updates, but this problem occurred before I installed them. Also, remember PE and TM simultaneously list some different running processes and TM also fails to show paths, etc.
View 3 Replies View RelatedControl File Copy Priority?
May 12, 2012I basically copied 276 GB from my hard drive to another external backup drive that is connected via eSATA on my computer. My motherboard and the hard drive support SATA II. File transfer took, I don't know how long I'm guessing 1 1/2 hours.
During the file transfer, my whole system halted to a crawl, well, worse than that. According to my resource manager, the CPU usage wasn't too high, and the RAM usage was 100%, with 15%-25% of my memory being used for "Standby" memory. The Disk usage was 100%. I was unable to open or close applications while the file transfer was in progress. I couldn't even type.
Is there a way to set priority while you're doing file transfers, thus leaving resources open to still use your computer?
Set Priority On Services That Start Automatically
Mar 8, 2012I recently have installed and uninstalled apache server in order to make it work, now I use XAMPP which SUPPOSEDLY starts the service manually when opened. However since I have installed it, windows is taking a long time to show the desktop when booting. It says Welcome for a while, then a black screen and finally the desktop is shown.Is there a way to set showing the desktop the number 1 priority ?
View 1 Replies View RelatedOne Thread In Real Time Priority Freezes The Os
Jul 31, 2011I just mooved from WinXP to Win7 with my software.My software needs to have real time response to I/O so it makes busy-wait in one thread (wich has affinity to run on one CPU).The result is 100% CPU on one of the cores and 0 CPU for others, in WinXP it worked just fine.In win7 the system freezes. The software is a console software (for Windows program it beaves a bit diffrent. only if the main thread make busy-wait without peeking messages it freezes)
View 3 Replies View RelatedCannot Change Boot Priority Among Hard Drives?
Aug 12, 2011Originally I had a small solid-state hard drive on this set up. I added a non-solid-state hard drive later. Recently, my solid-state drive, the C Dr., became too full to upgrade certain software programs such as Dragon NaturallySpeaking. I purchased a second solid-state hard drive.I "mirrored" that second solid-state hard drive. To make sure that Windows was operating appropriately, I rebooted and hit F10. I then showed the new solid-state hard drive. Everything booted perfectly and the new solid-state hard drive was noted as the C Dr.When I rebooted into bios to change the hard drive boot order so that the new second solid-state hard drive would be the first in the priority, when I highlighted it and exited from it,it still showed the original solid-state hard drive as the first hard drive.I have never had this problem before. I now have to go into F10 every time I boot into my computer and highlight the new solid-state hard drive.
View 5 Replies View RelatedChanging Wireless Network Connection Priority?
Nov 26, 2012I have three different wireless networks I can connect to, but the one Windows connects to first by default is not my first choice. I'd like to reorder the connection priority. Problem is, as you can see, no networks show up in my manage networks control panel! It clear as day shows that there are five choices, but, does not list them for me to prioritize! Is there a setting somewhere I'm missing that will make the networks visible?
View 6 Replies View RelatedChanged Boot Priority Now Cannot Reset It Back
Jan 22, 2013I recently ran a memtest86 program to check my ram so I had to change my boot priority to get the program to work. Now it seems I cant change it back. I've changed it and saved it but my cdrom still wants to boot up first. I even reset the bios with no luck.
View 9 Replies View RelatedChange Priority Of Internet Adapter On Boot?
Feb 18, 2012I have a wireless adapter in my desktop that connects by default on start up. I moved my PC somewhere I can run a cable from the router directly. Now my question is how do I make the Ethernet connection the default /start up connection, besides just taking the wireless adapter out of the pc.
View 3 Replies View RelatedPersistent Hangups & Failures To Boot Windows 7, Priority Changes?
Dec 28, 2012HPE-400f Pavilion has been crashing to black screen with cursor with problems booting windows 7. Was getting BIOHD4 error code, then BIOHD3 -- Warning: No Active Partition. Installed 2 spare hard drives to alleviate crowding but problem continues. In troubleshooting have noticed the boot-up priority order keeps changing, so that the HDD group is not first, and also so the main - OS C: - hard drive is not on top of the list. Correcting these problems allows windows to boot up just fine, but then random crashes or bootup failures continue (constantly).Have taken everything out and reconnected, done a clean install from HP disks (reformatting and wiping the HD), system repair, virus scans, etc., yet problem continues. How can I fix the boot-up routines so the computer keeps them as they should be and doesn't keep rearranging them on its own thereby causing Windows to hang up?
View 2 Replies View RelatedPersistent Hang Ups And Failures To Boot Windows 7 / Priority Changes
Dec 29, 2012HPE-400f Pavilion has been crashing to black screen with cursor with problems booting windows 7. Was getting BIOHD4 error code, then BIOHD3 -- Warning: No Active Partition. Installed 2 spare hard drives to alleviate crowding but problem continues. In troubleshooting have noticed the boot-up priority order keeps changing, so that the HDD group is not first, and also so the main - OS C: - hard drive is not on top of the list. Correcting these problems allows windows to boot up just fine, but then random crashes or bootup failures continue (constantly). Have taken everything out and reconnected, done a clean install from HP disks (reformatting and wiping the HD), system repair, virus scans, etc., yet problem continues. How can I fix the boot-up routines so the computer keeps them as they should be and doesn't keep rearranging them on its own thereby causing Windows to hang up?
View 2 Replies View RelatedFresh Install: When To Change Boot Priority Back To HD
Dec 23, 2012Right before a fresh install of Windows 7, I go into the BIOS and set the boot priority to boot from the CD first. So at what point during, or after, the installation do I go back into the BIOS and set the boot priority to boot from the Hard Drive?
View 7 Replies View RelatedHow To Increase Priority Of Excel - App Focus Diverted In Windows Environment
Aug 16, 2012I have an important app running in Excel that takes 7 hours to complete. During that time the focus of the app is somehow diverted to something else in the Windows environment. When this happens the Excel program stops in its tracks until I click on it to give it back the focus. How can I increase the priority of Excel in the scheme of things so that this doesn't happen?
View 5 Replies View RelatedBIOS Disk Error - Resetting Boot Priority To Correct Drive?
Jan 27, 2012When there is a Restart required after a software upgrade, the BIOS on my system (Win 7/64) will go to an external HDD (I have three for storage and backup). If I force it off and go into the BIOS on startup, it will show any of the other three HDD's in the boot priority. I reset the priority to the correct drive, save and start (repeat this process several times) and finally it will start from the correct HDD. I thought it might be the CMOS battery but with a new battery in place I still ran into this. This system (HP desktop) is less than a year old.
View 2 Replies View RelatedGetting "CD Rom Boot Priority No Medium" Error, But Still Able To Boot
Mar 6, 2012I'm currently running Windows 7 Home Premium 64 Bit. I have two hard drives in this PC. One is an Intel SSD (on which my Windows 7 is installed and is the active partition), and a 1TB hard drive. This computer has been up and running for 1 1/2 years now without any issue.
Yesterday I updated Norton and ran its Registry Cleaner and might have started this problem.
So the problem is when I boot my computer, every thing is normal until before the Windows 7 logo screen. Prior to today, it just goes there without any issue. But today, I received an error: "CD ROM Boot Priority Error - No medium". I have an Asus motherboard, and it has the F8 option to select boot device. So I reboot my computer, hit F8 and select my SSD, and Windows 7 is able to boot correctly and without any issue. Then I check my BIOS to make sure the boot order is correct and it's set to
1-SSD
2-HD
3-CD Rom
But everytime it would display me that error. Yes, I have a workaround by pressing F8 during POST and I'm able to boot to Windows 7. But I'd like to get rid of this error. I ran the Intel diagnostic software on my SSD and the drive is okay and healthy according to it.
Settings.ini Is Being Used By Another Process?
Oct 27, 2009Installed Windows 7 over Vista with no trouble except when Windows starts a window titled "Desktop Gadgets" pops up with the following message:"Settings.ini is being used by another process. Close the other program...."The above results in having no sidebar or gadgets, and I have no idea what the other process might be in order to close it.
View 8 Replies View RelatedIs There Any Way To Automate Process
Aug 16, 2011-At home, I want to use DHCP on my wireless network.
-At work, I want to IGNORE the DHCP address that the wireless network gives me, and force an IP address. Configuring the router to reserve an IP for my MAC is not an option due to a bloated corporate bureaucracy.
Right now, I have to go into control panel and manually configure the network EVERY DAY and while it's not all THAT much work, it's annoying.Is there any way to automate the process?
Process Explorer V15.0
Jul 19, 2011The Process Explorer display consists of two sub-windows. The top window always shows a list of the currently active processes, including the names of their owning accounts, whereas the information displayed in the bottom window depends on the mode that Process Explorer is in: if it is in handle mode you'll see the handles that the process selected in the top window has opened; if Process Explorer is in DLL mode you'll see the DLLs and memory-mapped files that the process has loaded. Process Explorer also has a powerful search capability that will quickly show you which processes have particular handles opened or DLLs loaded.
View 1 Replies View RelatedNot Enough Storage Available To Process Command?
Feb 19, 2010I've got a fairly recent Win7 x64 install on my system. Since Beta, I've been getting an error message "Not enough storage is available to process this command", which is accompanied by a stop code 0xc142 when launching items like Task Manager. I've seen the first error is typically related to the Windows Desktop Heap, but I've set from the original (2GB if I'm reading it correctly), to 4GB of space. I'm running a system with 1.7TB of available drive space (20GB on the OS drive as it's a smaller SSD drive) and 6GB of RAM. I've tried varying the windows page file from 500MB to the system-controlled 6GB with the same result.
View 8 Replies View RelatedJust Restarts At The Booting Process?
Aug 8, 2011I have CD-RW's and I like to know I can use them to recover my laptop failure system. My problem is that I can't access my desktop,Dell XPS. Its just restarts at the booting process. I think its a virus that is causing it. But I also want to restore my computer to its original factory position. How can I resolve this without going into the desktop?
View 7 Replies View RelatedSvchost.exe PID / Process During Idle?
Jan 8, 2012When I don't touch my computer for a while, I get CPU 100% (or CPU 50% on this dual core). As soon as I touch the mouse, in one second the culprit escapes. I know it's something under svchost.exe and I know I could see which svchost with Process Explorer or Svchost Viewer. But since the whole process disappears as soon as I touch mouse, it's pretty difficult to pinpoint. Svchost Viewer doesn't list all the processes in one screen, scrolling is needed. So it's basically always hidden and I can't scroll to it as that kills the process.How do I find out what exact process inside svchost.exe is eating my CPU during idle? My goal is to prevent the offending process altogether from starting.By the way, which settings of Windows Defender can cause this CPU 100% on idle problem, I didn't yet try shutting down all the settings there.
View 11 Replies View RelatedThe Process Cannot Access The File Because It Is Being Used
May 3, 2012I am getting this error all the time with Windows 7. I open a text file I want to edit, then go to save my changes and I get this error:
"The process cannot access the file because it is being used by another process"
I have full admin rights, running Win7 Ultimate x64 SP1. From a bit of research I have seen where many others have been experiencing this problem or something similar too. The only "fix" (that doesn't work all the time) is to close explorer.exe and then restart it to "release the handle"? Anyway, this is not acceptable for to money and time I spent upgrading/configuring this new OS from XP where I never had this problem and seriously cuts down my productivity.
Is there a fix for this? Has Microsoft even acknowledged this as a bug yet? I can duplicate this scenario the second or third time I try to edit/save/delete a text file and I know that explorer.exe is the problem or a big part of it in any case. I don't want to go back to XP x64 but having to deal with this headache 10-20 times a day is just too much to ask.
Process Of Windows 7 Installation?
Jan 21, 2009First things first. Brand new discovery! Did you know that it's impossible not to backing-up and lose your old files during Windows 7 installation? That's right! Microsoft contradicting it-self in the first steps of installation preparation step by step information. At first they say that we should back-up our old files as they WILL BE deleted. Then they practically force an option of where our old Windows files will be backed up into Windows.old folder. So the folders such as "Users, Program Files, Windows ...etc" will be stored in Windows.old folder. And any other files created by you that are stored in "C:" directory will remain untouched! So don't worry about upgrading or backing up anything, since Windows 7 does it all for you! My advice, just go with a clean install and you'll be safer that way. Now back to business. Have you ever experienced a really bad day with such as Windows 7?Possible solutions for your headache have finally arrived:We need to try almost everything possible in our powers to locate and solve the problems, right?NOTE: I'm gonna do these steps backwards like if we don't really know how to solve this quick!
[code]...
Shutdown Process Has Become Very Slow
Nov 6, 2012I bought this computer with Windows 7 since about 8 months. Within the last two months ago, shutdown process has become very slow. It's take 1-2 minutes every time. Startup time seems normal.I have now licensed kaspersky Internet Security and Comodo free Firewall (Does this affect?)The operating system updates have automatically installing since the beginning of my use.Most of my use is surfing the Internet and web design programs.Asus A52F with 3gb memory.
View 4 Replies View RelatedCD/DVD Driver Stopping My Whole Process
May 29, 2009I am trying to install Windows 7 RC into to different machines. Both are self built machines. Both are running Win XP w/ sp2.
On one machine I have tried everything to get past a CD/DVD Driver request. The first DVD driver is a NEC ND-2500A. I found what I thought were the drivers, but whenever I get to the point of selecting the drive (with the drivers in it) they don't appear within the DVD drive.
I even went as far as to load the driver onto the HDD I am installing Win& to. After may attempts, with no luck, I installed a plug and play CD/DVD player. Now, I have never had driver's for this unit, but it still wants drivers for it.
What am I missing here? Why won't it get past this point. I have even gone as far as disconnecting C drive and tried loading directly to D drive (second HDD drive).
On the second computer it mentions something about an I/O shield problem and wont even let me get into the setup stage.
System Idle Process Uses A Lot Of CPU?
Oct 30, 2011Dont know why but System idle process is randomly using so much CPU ! Anyone know what mabye the problem that causes so much CPU usage .
View 3 Replies View Related