Want To Change Priority Of Function Key?

Jul 19, 2011

i am using Dell inspiron N5010 laptop, here i want to use directly function keys like F5,F8.... without pressiing FN key with that.

View 2 Replies


ADVERTISEMENT

Cannot Change Boot Priority Among Hard Drives?

Aug 12, 2011

Originally I had a small solid-state hard drive on this set up. I added a non-solid-state hard drive later. Recently, my solid-state drive, the C Dr., became too full to upgrade certain software programs such as Dragon NaturallySpeaking. I purchased a second solid-state hard drive.I "mirrored" that second solid-state hard drive. To make sure that Windows was operating appropriately, I rebooted and hit F10. I then showed the new solid-state hard drive. Everything booted perfectly and the new solid-state hard drive was noted as the C Dr.When I rebooted into bios to change the hard drive boot order so that the new second solid-state hard drive would be the first in the priority, when I highlighted it and exited from it,it still showed the original solid-state hard drive as the first hard drive.I have never had this problem before. I now have to go into F10 every time I boot into my computer and highlight the new solid-state hard drive.

View 5 Replies View Related

Change Priority Of Internet Adapter On Boot?

Feb 18, 2012

I have a wireless adapter in my desktop that connects by default on start up. I moved my PC somewhere I can run a cable from the router directly. Now my question is how do I make the Ethernet connection the default /start up connection, besides just taking the wireless adapter out of the pc.

View 3 Replies View Related

Fresh Install: When To Change Boot Priority Back To HD

Dec 23, 2012

Right before a fresh install of Windows 7, I go into the BIOS and set the boot priority to boot from the CD first. So at what point during, or after, the installation do I go back into the BIOS and set the boot priority to boot from the Hard Drive?

View 7 Replies View Related

Brightness Change Acer Laptop Without Function Key?

Sep 26, 2012

In my laptop function key not work so i want to change the brightness of my laptop how can i change this even i try to change brightness using control panel but not show any feedback?

View 2 Replies View Related

Change In Windows 7 Computer Performance - Programs Fails To Function

Dec 10, 2012

I have observed a significant change in my Windows 7 computer. This is not a hardware issue. I have not downloaded any files or programs lately which could have caused this difficulty. I have run NIS program, anti-spyware. and malware-bytes, to no avail. I cannot seem to run backup using Ease Us Todo Backup; program fails to function. It worked before. Windows Backup fails to give any indication that it is actually working.

It takes longer to start up. I have run "Start Up Repair" to no avail. It also takes longer to shut down (no updates are in progress). Certain programs such as the one to enable process of my digital camera photos, fail to work. There was no such problem in the past. When I attempt to use this program, a screen from uTorrent appears, even after I have removed uTorrent, and re-downloaded the camera software. I have tried "System Restore" to no avail.

Contrary to the instructions, I cannot choose my own 'restore point', but only from a list created by Windows. The standard Windows 7 repair programs have failed me. I have nowhere else to turn. I have considered a registry cleaner, but the advice on this program is mixed; half of the people say it worked for them, the other half say never screw with my registry. If I cannot even backup my files, I am screwed.

View 9 Replies View Related

Set Priority (on Process) With Script?

Mar 20, 2011

Is there a way to set the priority of a process with a vbscript? If so, how? Say I want to set ProcessA to High and ProcessB to low.

View 1 Replies View Related

Control File Copy Priority?

May 12, 2012

I basically copied 276 GB from my hard drive to another external backup drive that is connected via eSATA on my computer. My motherboard and the hard drive support SATA II. File transfer took, I don't know how long I'm guessing 1 1/2 hours.

During the file transfer, my whole system halted to a crawl, well, worse than that. According to my resource manager, the CPU usage wasn't too high, and the RAM usage was 100%, with 15%-25% of my memory being used for "Standby" memory. The Disk usage was 100%. I was unable to open or close applications while the file transfer was in progress. I couldn't even type.

Is there a way to set priority while you're doing file transfers, thus leaving resources open to still use your computer?

View 9 Replies View Related

Set Priority On Services That Start Automatically

Mar 8, 2012

I recently have installed and uninstalled apache server in order to make it work, now I use XAMPP which SUPPOSEDLY starts the service manually when opened. However since I have installed it, windows is taking a long time to show the desktop when booting. It says Welcome for a while, then a black screen and finally the desktop is shown.Is there a way to set showing the desktop the number 1 priority ?

View 1 Replies View Related

Can't Put Real-Time Priority To A Process

Oct 24, 2012

I'm using Matlab daily and I am using it in Real Time and I have some isues, so my friend told me how to put it on Real Time priorty in Task Manager...

I tried but I god error message: Unable to set Realtime priority. The priority was set to High instead...

View 2 Replies View Related

Save Process Priority And Affinity?

Dec 21, 2012

I'm running a few gameservers myself on Windows Server 2008 R2 but I'm wondering if it's possible to make my system recognize that the process was ran earlier, and it'll apply the correct affinity and priority.

The problem is that I used to use ProcessLasso, but after 40 days of uptime (and then a restart) I'm not able to run the program without purchasing it.

View 9 Replies View Related

One Thread In Real Time Priority Freezes The Os

Jul 31, 2011

I just mooved from WinXP to Win7 with my software.My software needs to have real time response to I/O so it makes busy-wait in one thread (wich has affinity to run on one CPU).The result is 100% CPU on one of the cores and 0 CPU for others, in WinXP it worked just fine.In win7 the system freezes. The software is a console software (for Windows program it beaves a bit diffrent. only if the main thread make busy-wait without peeking messages it freezes)

View 3 Replies View Related

Changing Wireless Network Connection Priority?

Nov 26, 2012

I have three different wireless networks I can connect to, but the one Windows connects to first by default is not my first choice. I'd like to reorder the connection priority. Problem is, as you can see, no networks show up in my manage networks control panel! It clear as day shows that there are five choices, but, does not list them for me to prioritize! Is there a setting somewhere I'm missing that will make the networks visible?

View 6 Replies View Related

Changed Boot Priority Now Cannot Reset It Back

Jan 22, 2013

I recently ran a memtest86 program to check my ram so I had to change my boot priority to get the program to work. Now it seems I cant change it back. I've changed it and saved it but my cdrom still wants to boot up first. I even reset the bios with no luck.

View 9 Replies View Related

Persistent Hangups & Failures To Boot Windows 7, Priority Changes?

Dec 28, 2012

HPE-400f Pavilion has been crashing to black screen with cursor with problems booting windows 7. Was getting BIOHD4 error code, then BIOHD3 -- Warning: No Active Partition. Installed 2 spare hard drives to alleviate crowding but problem continues. In troubleshooting have noticed the boot-up priority order keeps changing, so that the HDD group is not first, and also so the main - OS C: - hard drive is not on top of the list. Correcting these problems allows windows to boot up just fine, but then random crashes or bootup failures continue (constantly).Have taken everything out and reconnected, done a clean install from HP disks (reformatting and wiping the HD), system repair, virus scans, etc., yet problem continues. How can I fix the boot-up routines so the computer keeps them as they should be and doesn't keep rearranging them on its own thereby causing Windows to hang up?

View 2 Replies View Related

Persistent Hang Ups And Failures To Boot Windows 7 / Priority Changes

Dec 29, 2012

HPE-400f Pavilion has been crashing to black screen with cursor with problems booting windows 7. Was getting BIOHD4 error code, then BIOHD3 -- Warning: No Active Partition. Installed 2 spare hard drives to alleviate crowding but problem continues. In troubleshooting have noticed the boot-up priority order keeps changing, so that the HDD group is not first, and also so the main - OS C: - hard drive is not on top of the list. Correcting these problems allows windows to boot up just fine, but then random crashes or bootup failures continue (constantly). Have taken everything out and reconnected, done a clean install from HP disks (reformatting and wiping the HD), system repair, virus scans, etc., yet problem continues. How can I fix the boot-up routines so the computer keeps them as they should be and doesn't keep rearranging them on its own thereby causing Windows to hang up?

View 2 Replies View Related

How To Increase Priority Of Excel - App Focus Diverted In Windows Environment

Aug 16, 2012

I have an important app running in Excel that takes 7 hours to complete. During that time the focus of the app is somehow diverted to something else in the Windows environment. When this happens the Excel program stops in its tracks until I click on it to give it back the focus. How can I increase the priority of Excel in the scheme of things so that this doesn't happen?

View 5 Replies View Related

BIOS Disk Error - Resetting Boot Priority To Correct Drive?

Jan 27, 2012

When there is a Restart required after a software upgrade, the BIOS on my system (Win 7/64) will go to an external HDD (I have three for storage and backup). If I force it off and go into the BIOS on startup, it will show any of the other three HDD's in the boot priority. I reset the priority to the correct drive, save and start (repeat this process several times) and finally it will start from the correct HDD. I thought it might be the CMOS battery but with a new battery in place I still ran into this. This system (HP desktop) is less than a year old.

View 2 Replies View Related

Set A Process Automatically To Priority "lower Than Normal" On Its Start?

Apr 13, 2011

I have a game (Battlefield 2) that has certain issues under Windows 7. In online gaming, apparently the punkbuster fails to communicate in the right way until the process bf2.exe is set to priority "lower than normal" in the task manager. this means you have to start the game, alt+tab back to the desktop, lower the priority in the taskmanager and then start playing.this procedure has to be repeated everytime i want to play with punkbuster (so every time )And yes, I browsed all, and I mean ALL, forums of BF2 and Punkbuster to fix this issue, so far this is the only solution that makes online gaming possible.how to lower the priority of a process permanently and automatically every time the process starts up?

View 1 Replies View Related

Getting "CD Rom Boot Priority No Medium" Error, But Still Able To Boot

Mar 6, 2012

I'm currently running Windows 7 Home Premium 64 Bit. I have two hard drives in this PC. One is an Intel SSD (on which my Windows 7 is installed and is the active partition), and a 1TB hard drive. This computer has been up and running for 1 1/2 years now without any issue.

Yesterday I updated Norton and ran its Registry Cleaner and might have started this problem.

So the problem is when I boot my computer, every thing is normal until before the Windows 7 logo screen. Prior to today, it just goes there without any issue. But today, I received an error: "CD ROM Boot Priority Error - No medium". I have an Asus motherboard, and it has the F8 option to select boot device. So I reboot my computer, hit F8 and select my SSD, and Windows 7 is able to boot correctly and without any issue. Then I check my BIOS to make sure the boot order is correct and it's set to

1-SSD
2-HD
3-CD Rom

But everytime it would display me that error. Yes, I have a workaround by pressing F8 during POST and I'm able to boot to Windows 7. But I'd like to get rid of this error. I ran the Intel diagnostic software on my SSD and the drive is okay and healthy according to it.

View 4 Replies View Related

Dvd Will Not Function Correctly

Sep 26, 2011

dvd will not function correctly, tired seven dvd player/writers all from working units. it telling me no disc then said checking disc. I have used writeables rewriteables then put them in a unit with xp on it works fine format try again works fine again. I have installed 7 on this machine and it will not work. all the other systems work. JUST will not write or read a DVD HELP!!!!

View 1 Replies View Related

Audio And Web Cam Cannot Function

Dec 11, 2011

I am using compaq presario f700 running window 7. my audio and web cam cannot function and have tried many software but failed.

View 1 Replies View Related

Sleep Function Do Not Work

Feb 13, 2011

I am using Windows 7 Home edition. I have found that the turn off monitor and sleep functions do not work.When I set these from edit plan settings and save changes it does not do anything. I have tried restarting my computer to see if this would work but to no avail. I have no programs on the task bar which might be keeping the computer awake

View 3 Replies View Related

Search Function Is Completely Gone?

Apr 2, 2011

when i tried to search for something, I noticed my search bar was gone from my start menu.So I went to google, searching for an answer, and...No go.I looked in my "Windows Features", and it is completely gone.without doing a system restore, or re-installing?

View 6 Replies View Related

Sort By Extension Function?

Jan 18, 2010

this function (sort by file Extension) didn't add to windows 7 , So when I use xp I used small free tool called cpext but when I try to add it with windows 7 nothing happen So I need this tool or any alternative do the same job (add option to sort by extension)

View 8 Replies View Related

How To Enable Tablet Function

Feb 13, 2011

I've been using my tablet pretty well stationary on my desk or the last year. When I installed windows 7 beta, I enabled the tablet function and it worked fine. Fast forward a few months; I installed windows 7 professional, but never could figure out how to enable tablet functionality, but I haven't really missed it until now. The computer doesn't detect the stylus near the screen. I've enable, disabled and re-enabled Tablet PC Components. I don't know what to do...

View 1 Replies View Related

Sleep Function Freezing?

Sep 19, 2011

When my computer running (Windows 7 64 bit) tries to sleep I have found that Windows cannot sleep but it freezes the computer and I get white noise from the speakers. The keyboard or mouse do not work. The only thing I can do is do a restart by pressing the restart button. It hasn't actually blue screened so there is no error report and it is hard to pin down what the error is. A restart error is given in critical errors but no more information than that. I have made sure all of my hardware drivers are completely up to date, checked power settings in the BIOS and turned off various settings in SandyBridge settings. I am at a loss as to what the problem is

View 9 Replies View Related

Windows 7 Sleep Function

May 19, 2012

I put this on the wrong forum, so here it is on the correct one. Lately the Del Desktop PC with Windows 7 64 bit refuses to come out of sleep when it has been left for a period of hours. When I manually send it to sleep it does so and the mouse and keyboard are set to revive it. It revives as it should do if I move the mouse or hit a key. However whenever I leave it asleep for a long period such as several hours, it refuses to awake and I have to force a reboot with the power button. That produces the black screen which you get after a crash.

View 10 Replies View Related

Camera And Fn Function Drivers ..

Nov 25, 2009

I installed Windows 7 earlier, along with a dual boot with Vista, but it appears to have stopped both the camera and the Fn functions working in both 7 and Vista.

I have tried using the drivers from the Samsung site, to no avail.

Any ideas ?

View 0 Replies View Related

Toshiba Function Keys

Dec 23, 2009

i have Toshiba a350-13a laptop , i installed windows 7 from 2 weeks . the function keys isn't working although i installed the Toshiba value added package which is responsible for activating function keys.

what the solution for this problem ???

View 4 Replies View Related

How Does Consent.exe Function In Windows 7

Feb 3, 2011

I noticed that on Win 7 a process called consent.exe runs when i try to install any application. From the consent.exe description i understood that it is the consent UI for administrative apps and i believe it is related to the UAC since when UAC is disabled, this process does not run. Does anyone know what this exe exactly do in the background? I mean what checks does it perform? Does it connect to the internet to validate something? I have a 1.8 GB setup and it takes almost 2 mins for it to reach the UAC screen when i start installing it.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved