BSOD Cannot Get Into Safemode
Mar 20, 2012
Error causes BSOD right after the windows logo. If attempting to boot into safemode, it just shows my mouse cursor and stays black. Nothing comes up.I have tried most of what I know what to try. I took my graphics card out (as someone on another forum suggested) and made sure the pins were all cleaned off. That did nothing. Since someone on another forum thought it was a graphics issue, my card is a GTX480 1536M GDDR5 384B Dual-DVI mHDMI (to be specific LOL)
View 4 Replies
ADVERTISEMENT
Aug 17, 2012
I constantly bsod on reboot. Yesterday I took out my graphics card because i was selling it in an old computer. It was a ati 4770. I threw in an old xfx 8500 gt because my motherboard doesnt have an internal gfx. It ran for about an hour or so and then i started getting this BSOD. Not thinking I assummed it had something to do with the old card going bad. Today i went and bought a new one to through in and I am still receiveing the same issue.
View 1 Replies
View Related
Jul 10, 2012
My Windows 7 64 bit machine will not boot. It keeps going into Windows System recovery mode. I have tried that multiple times and rebooted each time but no luck.System specs - Windows 7 64 bit, 16gb ram. Core i7-920 with 12 gb ram. This is an OEM disc that I bought from comp store, all parts and OS are less than three years old. C: drive - windows install a few apps, Drive 1 - games and music,
1) tried looking up this error with instructions. online instructions have had me go into the command prompt to perform edits on the c: windowsSystem32 folder. These do not come up in my prompt on my c: drive - where windows in installed. See program files etc, but no Windows32 folder.
2) already have run the c: chkdsk /r to try and fix the disc. It went through everything and comes back saying there are no problems. Still cannot boot to windows either get BSOD mentioned above or recovery mode.
3) Cannot go to previous restored state (one of the choices ) as it states that I have no restore points although I know that I have established at least 2 in the last 2-3 months
4) Tried inserting the Windows 7 disc and running repair from there but it just takes me to the same Windows system recovery mode which still does not work.
5) I tried hitting F8 during boot to go into safe mode but no good. it only takes me to a screen which gives me the option for boot order.
6) run the memory test from recovery console - no problems.
I have read the BSOD thread but everything there seems to assume that you can already boot into Windows at sometime and download the exe to run. (I cannot get into windows at all)Does anyone have any suggestions? I built this one myself (4th build) and have never in the 10 years of using Windows had a problem which I could not get into at least safe mode.I can go to maybe until this weekend but need to use my computer by Saturday cob.If I have had no luck at that point i will have to reinstall windows (it is on its own harddrive with most all of my applications on separate drives. So that may be a small blessing.I have had no strange occurrences while using the computer which is on pretty much 24/7.Is this what happens when a harddrive crashes? This one is about 2.5 years old and there have been no warning signs that something was amiss (no clicking etc)
View 8 Replies
View Related
Apr 20, 2012
mypc will only run in safemode; it gen wont get past the welcome screen if i try normally;nut if it does, none of the cons work, i want to do some stuff urgently, is there anywayi can lauch ome programmes whilein safe mode;
View 1 Replies
View Related
Mar 14, 2011
My laptop does not seem to boot into safe mode. I've been tapping F8, even though it says F8...system restore on the bottom left corner, it still won't boot. I tried this other method on advance recovery method and chose use system image created earlier - that and return to factory condition gave me an error saying "windows cannot restart the computer into the windows recovery environment." One method I haven't tried is using msconfig - in boot option. I'm worried about using this method..What if when I restart my laptop and it keeps loading to safe mode. I just did an sfc scan.I forgot what it said. It did found some corrupted files, and it repaired it. The reason why I want to use safe mode is to use this recovery disc - I notice that when I turn on my laptop, it takes quite a while to boot up. As a result, I also found that I have a problem with creating an system image. I want to use this repair disc, but I can't go into safe mode, so I can choose repair your computer.
View 2 Replies
View Related
May 15, 2011
I just performed a complete re-installation of Windows 7 Ultimate x32 onto a friend's Acer Aspire 5920 which was previously running Windows Vista x32.
All was perfect until I installed a Java and a program that needed it. When I ran the Java dependent program, it came up with an error message stating that Java Runtime Environment was either missing or outdated. I then uninstalled Java and reinstalled directly from the Java website. However, on the verification screen after the installation, my Java was not detected and I was told that "Something is wrong. Java is not working."
I followed the troubleshooting instructions on the website and alas it still will not work/be detected.
I then went searching around online for answers and I ended up doing a clean boot in safemode. There I disabled all running services that were not from Microsoft. Then I revisited the Java site and it was able to detect it. However, after rebooting to normal windows Java still can not be detected even with not running the services I turned off in Safemode.
View 4 Replies
View Related
Mar 9, 2012
I have loaded window 7 32bit a while back and so far it has been running great. Since then I had a virus and I try to boot into safemode but when I hit f8 it just has a white curser flashing. If I let it boot by itself its ok it starts into windows. So I try to go into safemode by just powering off my laptop in window so it would kick me into safemode. It put me to the option of chosing which safemode but it freezes while i move the arrows. I try to boot it from my repair cd, it boots but when it asks to hit any key to start the boot, it freezes. I then backed up all my files and reloaded window 7. Still the problem is still there. I tried everything that I could think of. I don't know if its in my registry or the os disc. I scan the registry and its good. My hard drive is new 500gb western ditgital. I have a toshiba laptop satelite a215-s5818.
View 7 Replies
View Related
Feb 29, 2012
i tried boot my windows normally but it restart with an error and error was showed up for less than 1sec. but some how i was able to get picture of that and link is belowUntitled.pngAnd same error come up when i tried to boot in safemode and it restart again and take me to "windows startup repair" option.so i tried to repair with "windows startup repair" but after loading windows file it stuck with one cursor and windows7 loggin wallpaper and nothing comeupwith this wallpaper it stuck IMG_3140.JPGand again same thing happens when i tried to recover from my recovery disknow
View 9 Replies
View Related
Aug 10, 2010
I'm curious if there is a way to run a specific program when I choose to reboot into safemode with networking?
Specifically looking to run or make sure the service for Logmein starts. The work I have to do would be best done in safe mode, and of course connecting remotely would be great.
View 3 Replies
View Related
May 1, 2011
I actually selected Alternate Shell minimal safe mode and now I'm stuck in it.How do I get out of this and into regular Safe Mode (with a GUI)?Alternate Shell is all command line so please reply with actual cammands.
View 1 Replies
View Related
Nov 7, 2012
I was instructed to remove my antivirus software and reinstall it by avast. They said to run their tool in safe mode. Try to start computer in safe mode and it gets just so far and reboots. I set MSConfig to boot as safemode/minimal. Do that and restart. Endlessly restarts - safe mode will not load, it just gets so far and then reboot.My computer will not start now at all. Can not get a command prompt, safe mode, and could not do a restore for some unknown reason.
View 4 Replies
View Related
Oct 11, 2011
i installed LibUSB-Win32- drivers so i could use iRecovery on my iPhone,on completion of installation of LibUSB my keyboard and mouse turned off, well all of my USB was disabled. so i was forced to restart, sadly same thing, login screen no keyboard or mouse, i tried in safemode, same thing. however my keyboard works in CMOS and BIOS so i know its a OS issue. and this only happened when i installled LIBUSB, i looked it up and tried manually removing LibUSB using the Win7 setup disks command prompt. i deleted LibUSB0.sys out of Windows/Systen32/Drivers so that LibUSB wont be called upon during start up, however doing this has now meant my PC will reboot after loading Windows even in safemode, the Starting Windows screen appears. fades and riight before it goes to the login screen it restarts, Safemode too. i have no Restore points and i cannot and i mean Cannot Format this harddisk, its not backed up and i have over 400GB of data i absolutely NEED.Im so stuck its not funny i have no idea what to do to get windows booting again and without this silly LibUSB stuff! i dont have aany PS./2 Ports on my mobo either!, what can i do >? Please ive asked everywhere and no one knows what i can do except reformat.
View 1 Replies
View Related
May 10, 2010
i got a problem with Vista, a normal start causes a crash (+memdump), it only starts in safemode, how to repair it ? i have already ran the installation-disk several times.
whats a little bit mysterious is the fact that last time i used that Vista-partition it worked normally. i then copied all files to a new partition on another harddisk and i have since then used that partion instead.
i changed CPU 2 days ago, can that be the cause ? the computer is otherwise working OK, im running Windows 7 on a another partition.
View 9 Replies
View Related
Mar 29, 2012
I've been looking for a fix for 5 hours and no luck-
System restarts as soon as it enters the splash screen, but I can enter into safe mode-
View 1 Replies
View Related
Dec 30, 2012
my laptop looks like it has a massive problem. i have been on various forums for advice but unable to solve - this is the problem
* it turns on & I CAN get into advanced menus
* it will not repair itself no matter what
* it will not go into any other modes , safe Etc....therefore I cannot restore to factory settings etc....
* ive Tried all tricks such as F8, Alt & F11 etc..... to get into advanced menu settings - all lead to the black screen
* everything i click on enter leads to a black screen - only a white curser appears.
its as if there is no way of accessing the computer disc/ hard drive in anyway from boot up. there is clearly a hardware problem but i cannot access anything internal beyond ordinary & advanced menus i just keep being led to the black screen & no activity. the menus work & that is all.
i run Windows 7 on a Dell inspiron 1564
View 1 Replies
View Related
Jan 6, 2012
I am trying to fix a friends labtop. I have been on the internet trying to find an answer but nothing works from answers on internet. When you turn the computer on it shows, Windows Error Recovery. Either Launch Startup Repair or Start Windows Normally. I use Launch Startup Repair and the screen goes blank after a couple of minutes the mouse comes up and can be moved but the screen stays blank. I have pushed buttons nothing has happened, it stays here, so I have to turn it off. It starts all over again. So I try Starting Windows Normally, it will just stay at the Starting Windows logo. It will stay here forever. The windows logo will fade with the color but it will stay here. I will then turn it off and try booting in Safemode. It starts with the drivers loading but then it freezes on Loaded:windowssystem32DRIVERSAtiPcie.sys. This is for all three of safemode options. I have tried all the other boots in the options and none of them work. They all will just freeze on starting windows or go to blank screen. So I tried to boot to Windows 7 CD. I put it in and nothing comes up. There is no Click on keys to boot from cd, but the cd does make noise like it is doing something. It will just be on a blank screen. I have also reset the bios to factory.
View 6 Replies
View Related
Dec 5, 2011
I am writing this right now because after the last BSOD it said "Windows can not start" and I had to restore to when it was previously working. So up until that point this is what I did.Since working with computers almost my entire life I know most BSOD are due to either bad memory, drivers, or bios. I started there and updated my nvidea drivers but it happened again. I moved to the motherboard bios.I did find a newer one on there and using ASUS tool I flashed the BIOS. Same thing still happened. Next I ran memtestx86 for 8 hours and it returned no errors.At this point I just decided to look for newest drivers for everything. One thing that happened consistently was that my wireless USB adapter from Cisco had to be unplugged and plugged back in for it to work. I went there first, reinstalled the drivers but still the same thing. I thought maybe it was my hard drive. I downloaded Seagates Utility tool and ran all the tests and they all passed fine. I ran defrag just for good measure along with windows version of the mem test and that passed as well. I still continued to get the BSOD and I have to tell you I'm irritated and also stumped.
Next I moved onto software. I have been using AVG free for years but I know virus programs do some crazy stuff and I got rid of that. Turned on windows defender. I decided that since the wireless adapter didn't work after these crashes maybe lets just go to a direct wired connection. I disconnected the cisco wireless adapter and I'm just using a direct connect right to my router.These come at random times.. nothing I do can trigger it. It can stay on for days and not crash and then there are times it can be up for 10 min and crash.Some of you might notice that in the CPU-Z screenshots I had to take the screenshot with the error underneath. Every time I chose either of the two slots it crashed the program.I have not done anything internally besides add some neon to my computer which does not connect to the board at all.I have seen IRQL blue screen once so I even went as far to go into the power settings for windows and make sure the usb and everything never went into any kind of "standby" mode.
I believe this is still under warranty and I would like to go in with good information if I need to challenge and get new hardware if that's what it is.On a side note I have not touched the memory physically. I know some suggestions were to reseed the memory and chip but In my opinion something that has been working for months that never moves off my desk and is never basically touched besides the power button shouldn't mean something just came loose after 4 months of owning it.Again that's just my opinion. I have removed AVG, Ad-Aware, Some webcam motion detector software (which was a joke) and the only thing that was really installed was Skyrim.
1 x Case CoolerMaster HAF 932 Full Tower Gaming Case - Black 1 x Case Lighting Liquid Neon Thunder Pattern Light - Red 0 x iBUYPOWER Labs - Noise Reduction None 0 x iBUYPOWER Labs - Internal Expansion None 1 x Processor Intel� Core� i7-2600K Processor (4x 3.40GHz/8MB L3 Cache) 0 x iBUYPOWER PowerDrive None 1 x Processor Cooling Asetek 550LC Liquid CPU Cooling System (Intel) - ARC Dual Silent High Perfornamce Fan Upgrade (Push-Pull Airflow) 1 x Memory 8 GB [4 GB X2] DDR3-1600 Memory Module - Corsair or Major Brand 1 x Video Card NVIDIA GeForce GTX 580 - 1.5GB - Single Card 1 x Video Card Brand === High Performance === EVGA Brand Video Card Powered by NVIDIA 1 x Free Stuff [Free Game Voucher] - Dungeon Siege 3 - Free with Purchase of NVIDIA GeForce GTX 550 or above 1 x Free Stuff [Free Game Download] - Just Cause 2 - Free with Purchase of NVIDIA Video Card 1 x Motherboard [SLI] ASUS P8Z68-V -- 3x PCI-E 2.0 x16, On-Board Bluetooth, Lucid Virtu Technology 0 x Intel Smart Response Technology None 1 x Power Supply 1000 Watt -- CoolerMaster RSA00-AMBAJ3-US 1 x Primary Hard Drive 1 TB HARD DRIVE -- 32M Cache, 7200 RPM, 6.0Gb/s - Single Drive 0 x Data Hard Drive None 1 x Optical Drive [12X Blu-Ray] LG BLU-RAY Reader, DVD�R/�RW Burner Combo Drive - Black 0 x 2nd Optical Drive None 0 x Flash Media Reader / Writer None 1 x Meter Display NZXT Sentry LX Aluminum Fan Control, Clock, and Temperature Display 0 x USB Expansion None 1 x Sound Card 3D Premium Surround Sound Onboard 1 x Network Card Onboard LAN Network (Gb or 10/100) 1 x Operating System Microsoft Windows 7 Home Premium + Office Starter 2010 (Includes basic versions of Word and Excel) - 64-Bit 1 x Keyboard Thermaltake eSPORTS CHALLENGER PRO Gaming Keyboard 1 x Mouse Thermaltake eSPORTS BLACK Professional Gaming Mouse 1 x Monitor 27" LCD 1920x1080 -- Sceptre X270W-1080P 0 x 2nd Monitor None 0 x Speaker System None 1 x Headset Thermaltake SHOCK Spin Gaming Headset - w/ Ergonomic Shaped Velvet Ear Cushions, Neodymium Magnet Speakers, In-Line Volume Controller & Independent Microphone Box 1 x Video Camera Connectland 1.3MP USB Interface WebCam 1 x Advanced Build Options iBUYPOWER Specialized Advanced Packaging System - Protect your investment during transportation! 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Achieve exceptional airflow in your chassis 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Basic Pro Wiring 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Power Package (Individually Sleeved 24-pin ATX, 8-pin CPU, and SATA Drive Power Cabling) 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Video Package (Individually Sleeved 8-pin and 6-pin PCI-E VGA Power Cabling) 0 x Case Engraving Service None 1 x Warranty Standard Warranty Service - Standard 3-Year Limited Warranty + Lifetime Technical Support 1 x Rush Service Rush Service Fee (not shipping fee) - No Rush Service, Estimate Ship Out in 5~10 Business Days
View 9 Replies
View Related
Dec 15, 2012
This started happening last night while i was playing Borderlands 2, it has happened at idle, playing just about any game in my library, during downloads and just browsing the web. I changed all of my accessible drivers, and it continued to happen, so i moved all of my personal files onto my external HDD. I re installed windows on my SSD (did not reformat) and reformatted my HDD. I re installed my drivers, re-enabled SLI and it ran fine for about an hour, just downloading WoW, and then happened again twice.
View 2 Replies
View Related
Jul 3, 2012
I started getting BSOD two weeks ago. As far as I can remember the first time I had a BSOD was on the day I installed Max Payne 3 (I read somewhere that the some guy had also this problem when he installed max payne). There were two occasions that I got a BSOD upon starting Max Payne 3. But lately I'm getting BSOD when doing low-load stuffs like browsing with no other apps opened. I've already done memtest with 10 passes with no errors. I'm 24 hours prime95 stable. I just don't get it! I've manually set my timings for my ram. I'm not doing any overclock. Everything is on stock settings.
View 2 Replies
View Related
Dec 2, 2011
I am brand new to this site so forgive me if I miss a step. I was wondering if someone who is good at debugging dump files could give me a second set of eyes on these 2 I will attach. One BSOD is DRIVER_POWER_STATE_FAILURE (ntoskrnl.exe) and the other is UNEXEPECTED_KERNAL_MODE_TRAP (ntoskrnl.exe).I have this problem across 15 identical laptops with fresh installs of Win 7 Pro 64Now my guess is this will boil down to a BIOS upgrade, but if there are driver conflicts within these dump files
View 6 Replies
View Related
Feb 29, 2012
I am the developer of a driver for a network adapter device that does scatter-gather DMA. Driver is not newly developed, but has had some recent changes.My client has a puzzling BSOD on one x64 machine after about 18 hours of successful operation. My x64 Win 7 machine runs fine forever. Client's box crashes in seemingly random places that indicate mem corruption.Mem test on machine was clean. Minidump is attached. WinDbg stack doesn't trace back to my code - it just shows the calls to handle the exception. Any clues y'all can see?System info from WinDbg:Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64Product:WinNt, suite: TerminalServer SingleUserTSBuilt by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506One difference between client's x64 and mine: Theirs has a valid DMA MapRegisterBase pointer from a AllocateAdapterChannel call, where mine (and my x86 systems) always have a null DMA MapRegisterBase
View 1 Replies
View Related
Jun 18, 2012
My computer has been stable for years, however recently I have been getting BSOD when doing any task. Windows will sometimes load to the desktop and I am able to watch video, run windows score, check email, etc before it will BSOD. Other times, it will BSOD before getting to the windows login screen.When I use safe mode, it logs in and stays there - no BSOD.I have tried removing all extra hardware in the machine, however this has had no affect. I have also tried one stick of RAM, then another, both BSOD.
View 3 Replies
View Related
Mar 27, 2012
Windows 7, 64bit, volume license (though OEM on the machine is also windows 7 64bit)1 month old hardware (10 days since I added memory). 18 month old OS install (backed up and restored, and drivers updated to new hardware)(Note that the older BSODs in the zip file are from old hardware)
View 1 Replies
View Related
Apr 26, 2012
I was having many random bluescreens on my old home build. I upgraded my Videocard to an Nvidia GTX 550 Ti thinking that it was videocard related. After fresh install I'm still getting BSODs.
View 3 Replies
View Related
Jun 2, 2012
Over the past months I have encountered a BSOD roughly every month and I want to get rid of it. The BSOD happens at random (at least as far as I know), not with specific tasks.This morning I started looking for the error and found that turning verifier ON might help in identification. I did this and rebooted a couple of times, every time with the same BSOD occuring during the boot stating something about dne64x.sys
System specs:
Windows 7 Professional x64 full retail version
+/- 8 months old system, OS age is the same
View 4 Replies
View Related
Jun 3, 2012
I never used it heavily at the start and assumed it was just a driver and that i'd figure it out later.Well; now is later and I can't figure it out.I've done a re-install of the OS (HP recovery)This system is about a year old and is an HP Pavilion dv6 laptop with AMD Phenom II N850 Triple Core @2.2 ghz 6 gig memory 64 bit Windows 7 Home Premium.
View 1 Replies
View Related
Sep 10, 2012
Like I said it was fine for a good while but today the Sht hit the fan and BSOD after BSOD and only just stabled now
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7600.2.0.0.768.3
[Code].....
View 5 Replies
View Related
Jan 13, 2013
I just bought all my parts, and I can't seem to get the computer stable. It is constantly BSOD or freezing and crashing during games. I've attached the SF diagnostic report for one of the dumps i guess.
View 1 Replies
View Related
Apr 10, 2011
im having a strange error i got after modificating DEP and after that got BsoD's and the windows cant boot now.full story in that thread
View 4 Replies
View Related
Jun 18, 2011
Two dell support technicians have said to go to factory settings butSpecs:64 bit windows 7 home premiumIntel core i3ATI Mobility Radeon HD 4330Service pack 1Any other info you want, just let me know. I'm so desperate for a solution that isn't a fresh re-load of windows.
View 2 Replies
View Related
Jul 15, 2011
This is how to Fix Windows 7 BSOD.Restart the computer and keep pressing F8 until the "Advance Boot Options" menu comes up.Use up and down arrow buttons to navigate the menu, select "Safe Mode" and hit EnterThis time you won't see the computer blue screen error.When the welcome screen comes up select Administrator and enter administrator's password(if you have one).Click on the START button and navigate to the Accessories folder. There you will see a folder entitled "System Tools," navigate to that folder and click on System Restore.In the System Restore program, make sure "Restore my computer to an earlier time" is selected and click NEXT.Choose a date on the calendar that you want to restore your computer and click NEXT.The last page of the System Restore will pop up with your date that you have chosen and click NEXT. The system will reboot and the computer blue screen will be gone
View 6 Replies
View Related
