Insufficient Memory Windows 7 64bit

Aug 28, 2012

While installing a printer software, a "insufficient memory, need 55 mb to install" message appears and installation stops. I have 366GB available in HD and 4GB RAM.
What can I do?

View 2 Replies


ADVERTISEMENT

Windows 7 Insufficient Memory Error

Jun 26, 2010

About a week or so ago my asus laptop messed up and i got stuck doing a clean install of win 7. At first it would go straight to 100% on copying windows files and wouldn't do anything else so i reformated the drive. After that it started saying i had insufficient memory on the drive even though i have two 100 gb partitions.

View 3 Replies View Related

FS9 On Windows 7 Ultimate - Insufficient Memory Error

Mar 21, 2012

I have a Intel i5 2500k 3.3Ghz, with 4GB memory running on windows 7 ultimate 64 bits. My problem is, since I changed the OS to this "more advanced", I cannot play Flight Simulator 2004 without this error message that closes the game. "Insufficient memory, please check your hard drive..." My system only has Flight Simulator installed, plus microsoft office and Avg antivirus (not counting with all the system updates, drivers etc). I don't understand this problem, because before this OS, I had Win XP 32 bits, with a lot more programs and addons installed and running, and I never had this problem...even with all the graphics pumped up to the max in the game. My graphic card is Asus En9800GT nvidia with 1gb ddr3 and HD with 400GB still to use (same board and HD used with XP).

View 4 Replies View Related

Insufficient Memory Or Disk Space Word Cannot Display Font?

Nov 1, 2012

Just installed office 2013, when I open word I get that error. I read up and one article said"So, following the second set of instructions, we created Old.dotx in the above folder, rebooted the Remote Desktop server, and fired up Microsoft Word The error did not reappear, though there still was not a Normal.dotx in thefolder.

View 2 Replies View Related

Windows 7 64bit Seeing Only 2.87 Of 4gb Memory

Dec 9, 2009

my windows 7 64 bit system is only seeing 2.87gb of the 4gb installed memory. checking the Resource Monitor, it says 1153gb has been allocated to Hardware Reserved. any idea how i can use all the memory? i have already tried unchecking Maximum memory under msconfig/boot/advanced options without success. below is my system properties. i have flashed my system with the latest bios.

OS NameEnter text here. Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name SOLO-PC

[code]....

View 21 Replies View Related

Windows 7 64bit - 6GB Memory But Only 4GB Usable

Mar 19, 2012

I have Win7 64bit with 6GB memory. The Windows System control panel agrees with that showing 6GB ram and nothing about a limitation. But today I was opening a lot of files and the program wouldn't let me open more files after Windows memory use reached 4GB. Task Manager showed 4GB used out of 6GB. I tried opening another file with a different program and my screen flickered and the program shut itself off, so it looks like the problem is with Windows and not the other programs. How do I get Windows to use all available memory not just 4GB out of 6GB?

View 13 Replies View Related

Windows 7 64bit Hardware Reserved Memory

Jun 17, 2011

I just rebuilt my computer, new motherboard and such and it has 6 GB of ram installed but it is only using 2 GB and has 4 GB hardware reserved. I have went and set the bios settings to memory remapping, I have tried reinstalling windows, I've tried unchecking the msconfig max memory, resetting the ram, and resetting the bios.

In the Systems window it reads that there is Total 6 GB Memory and only 2 GB usable, and in the Bios in the System information it also reads only 2 GB usable memory. The ram sticks aren't new, I took them form my old computer when I did the rebuilt, which are 3 Elipida 2GB 1333 MHz sticks. The motherboard is a Maximus III Gene with bios version 2103. OS is Windows 7 Pro 64 bit.

View 8 Replies View Related

Upgrading System Memory Windows 7 64bit?

Jan 28, 2012

I tried looking online about this I need to know if there's a big difference between 12GB of system memory and 16GB of system memory. I don't play many games but I do convert HD videos a lot and these programs are a pig on ram. I have 8GB now and have ordered 2 4GB sticks and was wondering if I should stay with 2 4GB sticks and 2 2GB sticks(total12GB) or should I upgrade to 16GB.

View 7 Replies View Related

Gain Memory By Upgrading To Windows 64bit?

Nov 30, 2012

I currently run win 32bit with 4g or RAM (2.75 useable). It I were to upgrade to win 64 bit would I get the 1.25g of memory back?

View 5 Replies View Related

Windows 7 64bit - Internet Explorer Using High Memory

Jan 26, 2012

I am running Win 7 64bit and have 16GB of DDR3 ram. However I receive messages my IE is using high memory. What does this mean and how do I cure it?

View 4 Replies View Related

Memory Not Allocating Correctly - Crashing On Windows 7 64bit

Jul 26, 2012

I've had 4gigs of RAM installed for very long and I was able to work fine with my browser open + Photoshop and Blender in Win XP. I've quite recently upgraded from Win Xp 32bit to Win 7 64bit. After installing Win 7 64bit I added 2x1GB sticks into my system to take advantage of memory I had available. These "new" sticks were of lower clocks than my 2x2GB I had installed so I tested clocking them higher. Well that wasn't really stable so I figured running them at lower clocks wouldn't hurt all that much.

So everything seemed to work fine, Memtest didn't whine about anything and everything seems to work well enough. Now however I can't have my browser + the other programs open at the same time but windows keeps whining about it running out of memory even though the taskbar memory amounts don't add up at all. I have like 5Gigs used but adding everything doesn't even get up to 2Gigs. I know about windows keeping unused memory ready for use but it doesn't seem to be that or otherwise I don't know why my programs keep crashing all the time.

I have a load of tabs open in my browser but they don't take all that much memory. And I don't have any other programs open that would use that much for anything. My display turns black sometimes and sometimes (not every time) after that I get the display driver error and that it's recovered. I've had this very seldom before but now it seems quite common so I figured it might have something to do with that the display driver doesn't get enough memory to use either. Just a wild guess but textureloading in Blender doesn't work all the time etc. so it seems like a vRAM problem to me.

View 9 Replies View Related

Windows 7 Administrator But With Insufficient Rights

Feb 5, 2012

I am running W7 Pro as a sole user with full Administrators rights on a new PC. I have been installing software such as Word 2002, my scanner and similar but hit a problem when attempting to install Pinnacle Studio Plus 9 when I received the message that I need Administrators rights to install software when I put the CD into the drive. I know that Pinnacle Studio Plus 9 is identified as being for up to XP; could this be the reason for the message? I am unsure as to whether XP Mode has been enabled as yet but am aware that W7 Pro has this facility.

View 5 Replies View Related

Unusable Memory Windows 7 64bit Acer Aspire 5532

May 19, 2012

I have an Acer Aspire 5532 running Windows 7 64 bit with 3.00 GB ram and I have 2.75 GB of ram saying unusable. My computer is and has been very slow and I haven't recently added or removed any hardware.I have checked 2 possible problems from info I found on this problem being I've located msconfig, boot, advanced options, max memory is "unchecked" and have checked my bios which do show the correct amount of memory but I can not enable "memory remap" because bios does not support. I've added a resource monitor screen shot below.

View 1 Replies View Related

Windows 7 Ultimate 64Bit Won't Boot When 'Memory Remap Feature' Is Enabled

Mar 12, 2012

I will start off by stating my relevant PC Specs for this thread:-

Asus P5B Deluxe MoBo
Intel Dual Core E6600 @ 2.40GHz
GeForce 7900 GS 512Mb
2 x 1GB DDR2 800MHz Corsair Value RAM (original) in Yellow Slots A1 & B1
2 x 1GB DDR2 800MHz Corsair Gaming RAM (NEW) in Black Slots A2 & B2

So I have just installed 2 extra GBs of RAM to bring my total to 4GB. After a successful boot and then checking my 'System' info Windows states 4.00GB of memory is installed but only 2.94GB is usable.Therefore I went ahead into my BIOS to enable the 'Memory Remap Feature'.However on reboot the PC gets to the 'Starting Windows' screen and doesn't get any further. The Windows logo doesn't start to appear. It just restarts going through all the usual screens again, eventually giving two options of:-

Launch Startup Repair or Start Windows Normally. The repair never works and Windows will never start normally again until I return to the BIOS to disable the mem remap.I reset the CMOS to Factory Default settings and tried again but did nothing. Also I have never updated the BIOS from the original version as I'm a bit scared to do so.I have looked hear for info on voltages and clocking but didn't get anywhere. Well got an overclock at 3.60Hz but only ran in Safe Mode. Obviously this is slightly irrelevant the above but was just trying stuff out and trying to learn more.

View 2 Replies View Related

Windows 7 64bit Memory Missing - Usage Rise Past 50 Percent?

Jun 28, 2012

I have 6GB of ram installed on windows 7 64-bit ultimate. For some reason I'm noticing that the usage will rise past 50%, but I am unable to find all of the used resources. From what I found, I'm using roughly 3.2GB of RAM when I add up all the memory usage under the processes tab.

View 9 Replies View Related

Getting NForce Memory Controller 64bit?

Mar 26, 2011

where can i find it for nForce 410/430 MCP?

View 1 Replies View Related

[MEMORY] The Amount Of Ram That Can Be Used On A 64bit System Dropped

Jul 15, 2012

So my problem is I use to have 5.74GB of ram usable out of 6.00GB. Since a restart of my computer there is now only 1.74GB out of 6.00GB.So I have a 64-bit Windows 7 Home premium SP1.The ram is 1066MHz with 1 x 4GB and 1 X 2GB.I only have 2 slots on the computer.

View 6 Replies View Related

How To Increase Dedicated Video Memory(64bit)

Jun 15, 2012

I recently opened a minecraft server, not knowing that online my minecraft would run slower. I'm not 100% sure if its because i only have MB of dedicated video memory, but i'm pretty sure it isIs there anyways i could increase this or get other options on how to help my computer run minecraft

View 3 Replies View Related

64Bit Ult Won't Boot When 'Memory Remap' Is Enabled To Use All 4GB RAM

Mar 12, 2012

I will start off by stating my relevant PC Specs for this thread:-

Asus P5B Deluxe MoBo
Intel Dual Core E6600 @ 2.40GHz
GeForce 7900 GS 512Mb
2 x 1GB DDR2 800MHz Corsair Value RAM (original) in Yellow Slots A1 & B1
2 x 1GB DDR2 800MHz Corsair Gaming RAM (NEW) in Black Slots A2 & B2

So I have just installed 2 extra GBs of RAM to bring my total to 4GB. After a successful boot and then checking my 'System' info Windows states 4.00GB of memory is installed but only 2.94GB is usable.Therefore I went ahead into my BIOS to enable the 'Memory Remap Feature'.However on reboot the PC gets to the 'Starting Windows' screen and doesn't get any further. The Windows logo doesn't start to appear. It just restarts going through all the usual screens again, eventually giving two options of:-

Launch Startup Repair
or
Start Windows Normally.

The repair never works and Windows will never start normally again until I return to the BIOS to disable the mem remap.Sometimes I have had a Blue Screen displaying the same errors as this thread:-Windows 7 64Bit BSOD's (IRQ_NOT_LESS and BAD_POOL_HEADER)I reset the CMOS to Factory Default settings and tried again but did nothing. Also I have never updated the BIOS from the original version as I'm a bit scared to do so.Have read about graphics card using part of the mem (which doesn't seem right with the 7900 GS as has it's own onboard mem) and also that voltages to the RAM should be increased.

MCH Voltages
Windows 7 :: Win 7 Wont Boot With 4GB RAM
Windows 7 RC won't boot with 4gb

I have looked hear for info on voltages and clocking but didn't get anywhere. Well got an overclock at 3.60Hz but only ran in Safe Mode. Obviously this is slightly irrelevant the above but was just trying stuff out and trying to learn more.

View 5 Replies View Related

Insufficient Diskspace To Fix Volume Bitmap

Dec 10, 2011

I just finished running chkdsk with switches /f and /r on an external drive because Windows backup/restore couldn't use it to store a system image and recommended that I run it. It took a couple of hours and then the program exited with the message 'Insufficient diskspace to fix volume bitmap'. I don't see how diskspace was insufficient as there are 79GB free out of the total 149GB, why did chkdsk say that?

View 7 Replies View Related

Get A Message "Insufficient Resources

Sep 7, 2011

Usually after I have run a macro on Excel and truy to open up another workbook , I get a message "Insufficient resources" I use Windows 7 and Office 2010 and have 4GB of RAM.

View 9 Replies View Related

[Far Cry 3] Error: Insufficient Access Privileges?

Jan 17, 2013

I bought "Far Cry 3" through Steam.I have been getting the error message: "You do not have sufficient access privileges to run the game. Please contact your administrator."Since then I have been trying to fix this issue several hours everyday, opened a support ticket with both Ubisoft and Steam. However no matter what I have done the error is still the same.I have tried to: Run the game as "hidden administrator". Given ownership of "C:" to myself. Changed Steam.exe, farcry3.exe, farcry3_d3d11.exe, Uplay.exe and UbisoftGameLauncher.exe to "Run as administrator" for every user. I have given "Full Control" to "Everyone, SYSTEM, Users (MyComputerNameusers) and Administrator (MyComputerNameAdministrators)" in the Steam and Ubisoft folders. I let Steam, Uplay and Far Cry 3 through the HIPS function (eset nod32). I always have UAC turned off

View 9 Replies View Related

Insufficient Permissions For Image Extraction?

Jun 8, 2012

when i save as file pdf to image i can't save the message alert that insufficient permmissions for image extractionhow can i do for this probplem?

View 4 Replies View Related

Excel Attachment Shows Insufficient Resources Message

Jun 10, 2011

Sometimes when I Open up an Excel attachment in outlook a message comes up "insufficient resources" I am using Windows 7 operating system & Excel 2007. The same problem occurs when I have several Excel files open and run a macro

View 2 Replies View Related

Installer Cannot Create Directory - Insufficient Storage Space

Mar 20, 2012

I have problems with Installer. I have tried all of the Fix-its etc on Microsoft sites but it still remains. It installs up to a point then tells me that it cannot create a directory.

C:Program DataMicrosoftWindowsStart MenuPrograms *****.

I have tried the Fixits, no good. I have tried to install Windows Updater 4.5 but it tells me that there is insufficient storage space. I have 435 GB of free space on my HD.

View 8 Replies View Related

Skype Not Installing - Insufficient Privileges / Cannot Create Folder Message

Aug 8, 2012

Running Windows 7 64-bit. Was using Skype successfully until I got an alert to update. So I started to update and during the process there was a problem with installing, so I cancelled. However, canceling also deleted my Skype and I am having trouble installing the latest version. Specifically, I'm getting and error message that says..."there are insufficient privileges and that I should log in as an administrator." I am logged in as the one and only administrator. Also, another error message said that Skype couldn't create the folder: "C:programdatamicrosoftwindowsstart menuprogramsskype? By the way, I've also have somewhat similar (administrator problems) problems installing ABBYY, Silverlight.

View 9 Replies View Related

Windows 7 Explorer.exe Running At Total Memory After A Few Minutes "memory Leak"

Oct 28, 2012

To start, I have Windows 7, on Sony Vaio laptop. I have been working on the issues with the malware removal team, but now machine looks clean, I am still having issues. When starting the computer and going to the task manager, I can watch explorer.exe start at about 18K memory usage and then grow constantly until it is running with almost all of the computer's physical memory after about seven min. I cannot get the context menu to show up after a few min by right clicking on anything. I had been experiencing "freezing" while playing Eden Eternal (an online role playing game) before that, which made me consider malware and seek help here at BleepingComputer. The freezing has ended, last time I played on that machine at least, but now there seems to be some issue with the explorer.exe taking all of the memory. I haven't been using the machine since I don't trust that there's not something running in the background that shouldn't be. In resource monitor there were "connections" that had "-" for both the name and the PID, but I don't know if that was the malware of if that's normal somehow? Issue with explorer.exe seems to be limited to only one user account, and not the other one. That is to say that if I log on one of the other accounts explorer.exe behaves normally, as far as memory usage.

View 12 Replies View Related

Convert A Shared Video Memory Into Dedicated Video Memory And System Video Memory?

Aug 12, 2011

how to convert a shared video memory into dedicated video memory and system video memory? me and my friend have the same specs computers but the same game runs slow in my computer but it runs smoothly in his computer?

View 1 Replies View Related

Troubleshooting Excessive Memory Use (Memory Leak) After Playing Video

Oct 6, 2012

i am having a problem with my memory getting tied up / used up and not being able to access it again until i reboot.

machine: dell xps studio 8100
os: win 7,
processor: i7 2.8
ram: 16gb (max it will take)
video: ati radeon 5700 (running 3 monitors)

versions: as far as i know i am running current versions of everything, including video drivers, flash, chrome, etc. (i've tried running chrome with both the build in version of flash and the system version -haven't seen a difference)

browser: i nearly exclusively run chrome / canary with auto-updates so am at the latest builds.what seems to cause me to use up / run out of memory is after i play videos (Internet, netflix, etc.), the memory seems to get used, but is not returned to the system, even if the browser is closed and re-opened.right now for example things are working fine; i rebooted my system a couple hours ago (but have not played any videos). i have adobe lightroom running, picasa, chrome and canary (currently 4 web browser windows open with 52 tabs open). task manager currently shows me using 8.20gb of ram, that seems pretty reasonable to me.

normally my system will keep running properly (if a program is closed, memory is freed up) right up until i start to play any videos (Internet, netflix, etc.) then it will start using up more memory. (of course i expect it to use more memory during playback) however, even if i restart the browser, the memory does not get freed back up. for example, just prior to the reboot, with everything closed, i was using right around 8gb of ram. once i rebooted, i was using 1.something gb of ram prior to opening any programs.however, once i start playing some videos, i never seem to be able to get my ram freed back up again unless i reboot the whole system. this is not just a problem with how much memory the system shows as being available, i frequently actually run out of memory. (task manager will show me as using around 15gb and then everything starts swapping out like crazy).

View 2 Replies View Related

Chkdsk High Memory Usage / Memory Leak?

Jun 1, 2009

I find that if I run chkdsk and watch the memory usage in task manager it jumps by about 50MB every 2 seconds or so until it either finishes or hits around 3.2GB at which point my physical memory shows 99% used (I'm running 4GB), and the system of course slows to a crawl.f you just run a quick chkdsk on your boot drive you may not notice it, but try running something longer like chkdsk /r on a flash drive or chkdsk /f on a bigger internal drive (but not your OS drive as this would require a reboot) and watch the memory usage climb. I have duplicated this on both systems I have running Windows 7. My XP machine (checking the same USB flash drive) uses a much more normal amount of memory for chkdsk (20 - 30 MB).

View 9 Replies View Related

3rd Party Sync Software For Windows 7 64bit With Outlook 2010 64bit?

Jul 10, 2010

Windows Mobile Device Center doesn't work with Outlook 2010 if installed as 64 bit. Microsoft says to "fix" this by uninstalling Office 2010 and installing the 32 bit version!My question is are there any 3rd-party sync programs that will work with Windows 7 64 bit and Microsoft Office Outlook 64 bit and Windows Mobile 6.5 devices? I don't need to sync email but I do need to sync calendar, contacts, and tasks. And yes, I am aware that the iphone will sync with it! Silly Microsoft. I have 1.5 years left on my mobile contract with my Windows Mobile 6.5 phone?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved