I have problems with Installer. I have tried all of the Fix-its etc on Microsoft sites but it still remains. It installs up to a point then tells me that it cannot create a directory.
C:Program DataMicrosoftWindowsStart MenuPrograms *****.
I have tried the Fixits, no good. I have tried to install Windows Updater 4.5 but it tells me that there is insufficient storage space. I have 435 GB of free space on my HD.
Just installed office 2013, when I open word I get that error. I read up and one article said"So, following the second set of instructions, we created Old.dotx in the above folder, rebooted the Remote Desktop server, and fired up Microsoft Word The error did not reappear, though there still was not a Normal.dotx in thefolder.
View 2 Replies View RelatedRunning Windows 7 64-bit. Was using Skype successfully until I got an alert to update. So I started to update and during the process there was a problem with installing, so I cancelled. However, canceling also deleted my Skype and I am having trouble installing the latest version. Specifically, I'm getting and error message that says..."there are insufficient privileges and that I should log in as an administrator." I am logged in as the one and only administrator. Also, another error message said that Skype couldn't create the folder: "C:programdatamicrosoftwindowsstart menuprogramsskype? By the way, I've also have somewhat similar (administrator problems) problems installing ABBYY, Silverlight.
View 9 Replies View RelatedI'm obviously brand new to the forums so I hope this is the right place for this. I should start with my type of drive; I have a 120gb Cherryville SSD from Intel serving as my C: Drive. Just the other night I had approximately 43GB left in my C: Drive (note this is incredibly low as well, but I was content). Last night I checked again and saw that I was down to 25! I performed a disk defrag and that actually decreased my storage to 23! I am absolutely puzzled as to the cause of this.
The only thing I have done between the time that I had over 40 and last night was update my visual BIOS (having nothing to do with my C: Drive at all) and download a simple XML update for Microsoft Expressions (which was measured in kilobytes). Granted I have done my fair share of updating .net framework and various other updates, but all of my major programs are on my hard drive, not my SSD. To put this into visual perspective, I'd like to share a photo showing around 25GB of space taken that is absolutely nowhere to be found, I find it hard to believe that Windows and a few programs can take up nearly 90GB of storage.
I recently got a new PC it has Windows 7 Pro 64Bit OS. My old XP box finally died. I have my music drive which is external USB 500 GB drive Seagate Free Agent drive. I used in on my old system. I have about 110GB of music on it. It is my main music drive. I got some new songs that i wanted to add to the drive. I tried to make a new directory and I received a message saying that I don't have permission to create a folder. I tried creating a new folder within my music directory. I can create a new folder within the root of the drive but I cannot create a new directory where I want it. I am an admin on the PC so I even made sure that I was added as a user on the drive when I set permissions and sharing.
View 5 Replies View Relatedwhen i install some visual styles it changes the disk icons and storage meters how can i change it here's what i mean [URL]
View 1 Replies View RelatedI would like to create a daily folder on system startup which has the date like this 12-03-2012 I also want it to go to a certain place on my hard drive C:Users/Name/My Documents I have this script but it puts the date the wrong way around and I would prefer dashes in between the dates? for /f "skip=1" %%d in ('wmic os get localdatetime') do if not defined mydate set mydate=%%d
md %mydate:~0,8%?
Previously my machine was dual-booting Windows 7 and Ubuntu. It worked fine with no problems until I decided that I didn't use nor want Ubuntu on my machine. Disk space was getting low for my primary partition and I decided it was time to let Ubuntu go. Anyhow long story short I cleared the two partitions that Ubuntu was using through the 'disk management' tool in windows. I didn't think at the time that GRUB would be stored within these partitions and that lead to the problem of being unable to boot anything.
I made and used a repair disc via another machine and then restored the bootsector code with it. That fixed the problem of being unable to boot. Now my problem is that I'm left with around 3-4 GB of wasted space in a partition. I was wondering if this 3-4 GB could be added to my primary storage partition? I've looked everywhere in the disk manager but I can't find anything there. I'm unsure as to if there is some 3rd party software available that could fix this? That 70GB partition shall remain undisclosed.
If I run the setup of new program I recently get this error message more and more: Setup was unable to create the directory "C:usersgebrui~1AppDatalocalemp.... Error 5: Acces denied."I looked quite a while around the internet and found some people with exactly the same problem but the solutions didnt work out for me. I tried turning AUC both on and off, I tried running the file as admin (My account is admin also), I even tried to install it with my virus scanner turned off but nothing seems to work?
View 1 Replies View RelatedI have just currently installed 1 x 2 TB HDD. Installed Windows 7 64 bit on one. After installing all my basic applications I then decided to create a backup on my spare 1TB allocating 50 gig for the image. The image itself is only 35gig but when I click on create image it runs for a little while then displays the following message:
"There is not enough disk space to create the volume shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. For volumes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)". It seem like the OS does not recognise 1TB hdd
I have been trying to install windows 7 on my hd and initially started with ubuntu on partition 1 then resized partition to leave unallocated space for windows 7.Now I am installing windows 7 from cd and can't get past 'where do you want to install Windows' page because of error stated in title.I've tried having unallocated space, a ntfs partition, and now have completely wiped the hd of ubuntu's partitions to clean install windows 7. None of the attempts have gotten me past the location of install page.
View 4 Replies View RelatedI'm looking for a software that can create one installer which can install a custom list of applications.
View 5 Replies View RelatedI'm trying to install Java 7 & I keep getting this error:installer : wrapper.createfile failed with error 5: access is denied?I have uninstalled all previous versions of Java, tried installing as administrator... Nothing is working.
View 3 Replies View Relatedmy pc hard disc is 0f 500 GB.....the problem is that when i go to disk management option there is no unallocated space...which i can use to create new driveas my c drive is of 451 Gb...how to get unallocated space??
View 3 Replies View RelatedYesterday I tried making partitions in my hard disk, and I failed Here's what I did:
1. run compmgmt.msc
2. Shrink C: drive
3. my hard disk' capacity shrunk from 451GB to 260GB
4. an error window appeared ("I/O device error" I think)
5. it left me no unallocated space to create partition
using compmgmt I can't extend my hdd back to 451GB, so I used MiniTool partition wizard to restore it (btw, shrinking with MT PartitionWiz resulted the same, no unallocated space)
I have 500 GB harddisc on my laptop with three partitions. I wanted to split the 400gb into 300 + 100 GB. So, I went to disc management and shurnk the volume to 300GB. I saw 100GB unallocated space. But, when I try to create a new partition with that unallocate space, I get a message that 'media not writable' and the 100gb remains unallocated. I have used a software called 'MiniTool Partition Wizard Home Edition'. But, it couldn't apply the changes either.
how can I create a new partition with my 100gb unallocated space.
I bought a 3TB hard drive for my gf and did a fresh install of Windows 7. When I was creating the first partition the Win7 install auto created two more volumes, both labeled as Unalloated. I thought nothing of it as I figured I would be able to merge/create my second partion with the remaining space once Windows was up and running. However, to my dimay I can not create a partition on one of those random Unallocated volumes. I've tried to delete all partition but the one that my OS is running on and I've tried to create two then merger but when I right-click on the second (first one works) volume the option t create a simple volume is greyed out.
View 7 Replies View RelatedI currently just set up my new build. I decided to go with Western Digital Caviar Green 3TB for my hard drive. However, I split the hard drive into two parts: 2 TB and roughly about 770 GB unallocated space. I installed Window 7 on 2TB partition. Now, I decide to use the rest of 770 GB of unallocated space. I tried to use Computer Management, but it doesn't give me the option to create a new volume from unallocated space. Similar thing happened with EaseUS Partition Master. With Acronis Disk Director, it doesn't even recognize the unallocated space at all!!! So how can I create a new volume or even merge it with my C drive? Do I have to reformat my hard drive and split them again and do a clean installation again?
Note:I already checked, my BIOS recognizes my hard drive with 3 TB. The unallocated space is right after my C drive. There is only 1 primary MBR partition (C drive), and 100 MB system files right before it.
I'm belatedly trying to create my first system recovery backup, on a system which I first installed Windows back in November 2011.I have a 1TB drive with a 214GB partition that I set up for a backup. I manually store all my media and pictures to both a separate partition on the drive, in the cloud, and on a separate external HDD, so all I really want to back up is the system image.This is the newbie sounding question to confirm my suspicions: The system drive I'm trying to back up is definitely bigger than the partition I've set aside for recovery. My C drive is a 473GB partition, and I'm using maybe a bit more than half of that currently. If this is the case, is there a way to reallocate un-used disk space from my other partitions to make the recovery partition larger, or should I be biting the bullet and shelling out for a 500GB external to cover my system recovery needs?
View 3 Replies View RelatedOne directory (Directory A) containing the same files as Directory B but with the wrong Date created / modified attributes.how to make all the files in Directory A have the same date created/modified attributes as Directory B.
View 7 Replies View RelatedI have a 10 files that have all been categorised into about 40 folders. These files have been damaged.I have a backup of all these files, but they are not categorised and sit in a single directory.Does anyone know of an easy technique to batch replace the damaged files with the originals?
View 2 Replies View RelatedI'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
i have enough disk space to create a new volume but during create wizard it gives"there is not enough disk space to create volume"....why??
View 5 Replies View RelatedI am getting this pop window "you cannot create a new volume in this unallocated space"
View 3 Replies View RelatedKeyboard and mouse drivers unaffected.USB Mass storage device properties messagewith driver check on:"Windows cannot verify the digital signature for the drivers required for this device."with driver check off:Tells me drivers are corrupt or missing.Search show diver where it should be:C:\Windows\System32\drivers\usbstor.sys (also usbfilter.sys).Used the HP Recovery Manager to restore factory setting for USBStor.sys, it indicates it is successful but no changeon reboot, still cannot use flash drives, SD cards, external HDs. Units work find on my laptop.Called HP 4 times, after extensive troubleshooting each time, following their instructions, go to hp.com/go/instant, get screen saying request has been received. Each time tech tells me he cannot find my request.After a while, read 2 hours, told they need to talk to supervisor, will call me back, KISS OF DEATH, never hear from them.
View 2 Replies View RelatedI just finished running chkdsk with switches /f and /r on an external drive because Windows backup/restore couldn't use it to store a system image and recommended that I run it. It took a couple of hours and then the program exited with the message 'Insufficient diskspace to fix volume bitmap'. I don't see how diskspace was insufficient as there are 79GB free out of the total 149GB, why did chkdsk say that?
View 7 Replies View RelatedAbout a week or so ago my asus laptop messed up and i got stuck doing a clean install of win 7. At first it would go straight to 100% on copying windows files and wouldn't do anything else so i reformated the drive. After that it started saying i had insufficient memory on the drive even though i have two 100 gb partitions.
View 3 Replies View RelatedUsually after I have run a macro on Excel and truy to open up another workbook , I get a message "Insufficient resources" I use Windows 7 and Office 2010 and have 4GB of RAM.
View 9 Replies View RelatedI am running W7 Pro as a sole user with full Administrators rights on a new PC. I have been installing software such as Word 2002, my scanner and similar but hit a problem when attempting to install Pinnacle Studio Plus 9 when I received the message that I need Administrators rights to install software when I put the CD into the drive. I know that Pinnacle Studio Plus 9 is identified as being for up to XP; could this be the reason for the message? I am unsure as to whether XP Mode has been enabled as yet but am aware that W7 Pro has this facility.
View 5 Replies View RelatedI bought "Far Cry 3" through Steam.I have been getting the error message: "You do not have sufficient access privileges to run the game. Please contact your administrator."Since then I have been trying to fix this issue several hours everyday, opened a support ticket with both Ubisoft and Steam. However no matter what I have done the error is still the same.I have tried to: Run the game as "hidden administrator". Given ownership of "C:" to myself. Changed Steam.exe, farcry3.exe, farcry3_d3d11.exe, Uplay.exe and UbisoftGameLauncher.exe to "Run as administrator" for every user. I have given "Full Control" to "Everyone, SYSTEM, Users (MyComputerNameusers) and Administrator (MyComputerNameAdministrators)" in the Steam and Ubisoft folders. I let Steam, Uplay and Far Cry 3 through the HIPS function (eset nod32). I always have UAC turned off
View 9 Replies View Relatedwhen i save as file pdf to image i can't save the message alert that insufficient permmissions for image extractionhow can i do for this probplem?
View 4 Replies View Related