I just finished running chkdsk with switches /f and /r on an external drive because Windows backup/restore couldn't use it to store a system image and recommended that I run it. It took a couple of hours and then the program exited with the message 'Insufficient diskspace to fix volume bitmap'. I don't see how diskspace was insufficient as there are 79GB free out of the total 149GB, why did chkdsk say that?
View 7 Replies
Chkdisk on my new Windows 7 install returned the following:
"CHKDSK discovered free space marked as allocated in the master file table (MFT) bitmap.
CHKDSK discovered free space marked as allocated in the volume bitmap".
Windows has made corrections to the file system. This is a brand new clean install of Windows that's barely been used. What could have caused this? I'm trying to troubleshoot problems with slow boots and general lack of responsiveness, and have reinstalled three times now trying to fix it...
Trying to upgrade from Vista Home Premium to Win 7 Ultimate; I have read a bunch of the threads here... but none seem to apply to me; as I have 493MB free. I even tried increasing the space on my recovery partion by 20 MB in-case that's where Win 7 was trying to instal... nothing
View 8 Replies View RelatedAbout a week or so ago my asus laptop messed up and i got stuck doing a clean install of win 7. At first it would go straight to 100% on copying windows files and wouldn't do anything else so i reformated the drive. After that it started saying i had insufficient memory on the drive even though i have two 100 gb partitions.
View 3 Replies View RelatedUsually after I have run a macro on Excel and truy to open up another workbook , I get a message "Insufficient resources" I use Windows 7 and Office 2010 and have 4GB of RAM.
View 9 Replies View RelatedI am running W7 Pro as a sole user with full Administrators rights on a new PC. I have been installing software such as Word 2002, my scanner and similar but hit a problem when attempting to install Pinnacle Studio Plus 9 when I received the message that I need Administrators rights to install software when I put the CD into the drive. I know that Pinnacle Studio Plus 9 is identified as being for up to XP; could this be the reason for the message? I am unsure as to whether XP Mode has been enabled as yet but am aware that W7 Pro has this facility.
View 5 Replies View RelatedI bought "Far Cry 3" through Steam.I have been getting the error message: "You do not have sufficient access privileges to run the game. Please contact your administrator."Since then I have been trying to fix this issue several hours everyday, opened a support ticket with both Ubisoft and Steam. However no matter what I have done the error is still the same.I have tried to: Run the game as "hidden administrator". Given ownership of "C:" to myself. Changed Steam.exe, farcry3.exe, farcry3_d3d11.exe, Uplay.exe and UbisoftGameLauncher.exe to "Run as administrator" for every user. I have given "Full Control" to "Everyone, SYSTEM, Users (MyComputerNameusers) and Administrator (MyComputerNameAdministrators)" in the Steam and Ubisoft folders. I let Steam, Uplay and Far Cry 3 through the HIPS function (eset nod32). I always have UAC turned off
View 9 Replies View Relatedwhen i save as file pdf to image i can't save the message alert that insufficient permmissions for image extractionhow can i do for this probplem?
View 4 Replies View RelatedWhile installing a printer software, a "insufficient memory, need 55 mb to install" message appears and installation stops. I have 366GB available in HD and 4GB RAM.
What can I do?
I have a Intel i5 2500k 3.3Ghz, with 4GB memory running on windows 7 ultimate 64 bits. My problem is, since I changed the OS to this "more advanced", I cannot play Flight Simulator 2004 without this error message that closes the game. "Insufficient memory, please check your hard drive..." My system only has Flight Simulator installed, plus microsoft office and Avg antivirus (not counting with all the system updates, drivers etc). I don't understand this problem, because before this OS, I had Win XP 32 bits, with a lot more programs and addons installed and running, and I never had this problem...even with all the graphics pumped up to the max in the game. My graphic card is Asus En9800GT nvidia with 1gb ddr3 and HD with 400GB still to use (same board and HD used with XP).
View 4 Replies View RelatedSometimes when I Open up an Excel attachment in outlook a message comes up "insufficient resources" I am using Windows 7 operating system & Excel 2007. The same problem occurs when I have several Excel files open and run a macro
View 2 Replies View RelatedI have problems with Installer. I have tried all of the Fix-its etc on Microsoft sites but it still remains. It installs up to a point then tells me that it cannot create a directory.
C:Program DataMicrosoftWindowsStart MenuPrograms *****.
I have tried the Fixits, no good. I have tried to install Windows Updater 4.5 but it tells me that there is insufficient storage space. I have 435 GB of free space on my HD.
Just installed office 2013, when I open word I get that error. I read up and one article said"So, following the second set of instructions, we created Old.dotx in the above folder, rebooted the Remote Desktop server, and fired up Microsoft Word The error did not reappear, though there still was not a Normal.dotx in thefolder.
View 2 Replies View RelatedRunning Windows 7 64-bit. Was using Skype successfully until I got an alert to update. So I started to update and during the process there was a problem with installing, so I cancelled. However, canceling also deleted my Skype and I am having trouble installing the latest version. Specifically, I'm getting and error message that says..."there are insufficient privileges and that I should log in as an administrator." I am logged in as the one and only administrator. Also, another error message said that Skype couldn't create the folder: "C:programdatamicrosoftwindowsstart menuprogramsskype? By the way, I've also have somewhat similar (administrator problems) problems installing ABBYY, Silverlight.
View 9 Replies View Relatedso i have a blue yeti, and i'm an online animator/voice actor. whenever i record audio on my blue yeti (or any other mic) i record about 4-6 inches from the mic, and turn the gain down enough that the audio doesn't peak as i yell or whatever. this is what you're supposed to do if you don't want your audio levels peaking and making your recording sound horrible and corrupted. however, afterwards, it means i have really quite recordings. not a problem right? now that it's recorded right, i can boost the volume of the entire clip afterwards right? wrong. i'm not an audio expert so i must be missing something. but why in gods name would the audio distort and peak after it's recorded successfully? it's all there, it's all clean audio. if i turn the volume on my speakers all the way up it sounds crystal clear! all i want to do is do that inside the computer so that when i upload it to Internet people don't have to turn their speakers so far up. but if i increase the clips volume in the computer, it distorts! it sounds awful! why?! i tried in sony acid and audacity and they both do the same thing! i can take sound effects, and recordings made by other producers and crank them up nice and loud, but mine just fall apart!
View 2 Replies View RelatedI bought a USB A4 Tech HU-200 HeadPhone Its volume is quite high even when the windows volume is at 0, When its at max 100 it works like dedicated speakers Is there any way to reduce the volume beyond the lowest volume of windows 7?
Note: My Headphone does not have any soft of driver or software
I just received a new keyboard today: Thermaltake Challenger Ultimate. I went from a Logitech G15.
First thing I did was connect the keyboard and install the software that came along on the CD, it probably also installed the correct drivers. First after this did I uninstall the software and drivers from the old Logitech G15. But before that, and now after, the volume buttons on my new keyboard is still not adjusting the volume when I press them.
A speaker-icon like this shows up when I press the volume buttons, so its not that the keys are not working: (ignore the text behind it, its me writing an assignment)
I recently got this problem, that my volume hotkeys stopped working, (Acer Aspire 5560G) AMD High Definition Audio. I also tryed plug in other keyboard that have's volume hotkeys but still doesn't work.
View 2 Replies View RelatedI like to listen to music loudly sometimes. I have both the volume mixer and my application's volume set to maximum levels, but it's not loud enough for my liking. Is there any way to increase the maximum sound volume in Windows 7?
View 9 Replies View RelatedWhat is the optimal set-up?
High volume on speakers and low in windows, or low on speakers and highest in windows?
[email]amtemirak@hotmail.comSpoiler :[spoiler]
View 1 Replies View RelatedI will get strait to the point:my volume is going up and down by itself nomatter if i am using winamp or streaming. i would add that my audio is controllet by srs hd audio lab(audio plugin)
View 2 Replies View RelatedI want to partition the hard disk since there is just one volume C ( OS) and install ubuntu also. Do i need to take a backup of my data? Also, does another volume contain the new OS ubuntu?
View 6 Replies View Relatedjust got my new pc hooked up. and everything is working fine. except the volume. i can hear but its not very loud. i tried going into the settings but nothing i do makes it louder. it dont have a sound card. but it still has realtek hd audio. i even went in that settings but i didnt see any place to where i can boost the volume.
View 11 Replies View Relatedim having trouble with my headphones mic which from some reason recording volume is very low . so low that in game (by using TS [teamspeak]) when other people have the game sound , they can bearly hear me. i set my mic to 100 volume and the boost to +30db but thing stay the same.when i test the mic with recorder the bar even dont rised a little bit .ohh , and by the way , in case anyone thought the problem isnt in the mic which is new due to the fact that after this problem happend at the last microsoft headphones i had, i bought new one (forgot the model).
View 4 Replies View RelatedI have a set of powered Logitec 2.1 speakers that I used to be only able to turn up to about half and it would become too loud for my apartment or hearing pleasure. (It was the same with our with out headphones) But lately I will have to run it at MAX volume to get anything decent out of them. I've checked every volume setting and control I know of. It's kind of odd, I'll seem ok at some times, and then at others i'll really notice it. I just built the computer maybe a month or two ago, and I havn't had any luck with it since. Motherboard" ASRock 870 extreme3AMD CPU Phenom II x6 1100 Black8GB ramIntegratd Realtek sound... whatever else.Now before you suggest that I set the communications options to "Do Nothing" I've already done that. I've also updated reinstalled drivers blah blah blah. So I need some fresh Ideas here
View 7 Replies View RelatedI have an HP Pavilion DV7 laptop... The volume slider keeps turning itself all the way down, even as I try to turn it up. Its been happening for a while now. I've tried:
1.) Completely removed everything attached to the MOBO, only the LCD, DC Jack, RAM and HDD. Issue still persists
2.) Same as above only added battery, and unplugged the ac adapter and ran off battery. Issue is resolved.
3.)Plug power back in the issue happens again.
I tried many combinations of removing and adding hardware components and they all have the same result.
4.) I update the drivers, then uninstalled and download new drivers. Installed the software and disabled the software. The issue persists
5.) Tried updating windows and then disabling the sound software along with HP Smart software. Issue persists.
6.) installed a new HDD and clean installed windows 7 with only the provided drivers. Issue persists
7.) Replaced the Sound/Smart Media Power panel. Issue Persists
8.) Changed the RAM. Issue persists.
9.) Disabled the sound devices in the "Sound" control panel. Issue Persists.
10.) Flash the BIOS, already has the newest revision so I re-flashed it. Issue Persists.
11.) Tried switching AC Adapters. issue persists
12.) Changed DC Jack & AC Charger.
I don't know why but, when I play Left 4 Dead or Garrys Mod the process volume on Volume Mixer goes on minimum but a "ghost" volume icon stays on maximum.
I always have to minimize my game and get my volume on maximum again, each round start (when survivors were overwhelmed or survivors win).
When i have an SS i post here.
And only to say, im so happy that, I've downloaded the video driver from ATi website, but I don't needed to install it, I play all my games (L4D, CSS, Gmod, TF2...) with the WDM driver with all filters and everything with the same FPS i get with the ATi driver installed.
I deleted all shadow copies, first via Disk Cleanup and then via vssadmin, all per your instructions. It didn't help. I then went in and disabled System protection. It didn't help either.Disk manager still says I only have 462756 MB shrink space out of a total of 953867 MB (NTFS), leaving 491111 MB after shrinkage. That's not enough - I need to shrink the C volume to 96 GB, because I want to move to my empty RAID SSD (2 disks/mirror) with 107.13 GB (NTFS). I assume the reason I cannot use Seagate's disk utility to execute the move is that it cannot move from a larger partition to a smaller, but it hasn't actually told me that - it just doesn't follow instructions.)
View 1 Replies View RelatedHow can I change my [system]VolumeID, because I got banned from something and that was a hardware ban, I try changing mac but it was something different and most of the guys say it's the volume ID.So I downloaded 3 different programs to change the Volume ID, they all came out exactly as written in the tutorials and still my ID isn't changing.Is it because of windows 7 or maybe because of my pc's makers (or however you call them) ACER?I tried download it from a microsoft page and it came up good in command propt nothing will work.by the way I have windows 7 home premium 64 bit, acer, intel7 proccesor and NTFS hard drives.
View 4 Replies View RelatedActually I have installed Windows7 Ultimate on my laptop and I have a volume license key. And it seems, the windows7 activation required windows volume license server to activate. But I am in remote and I could not able to access volume license server available in my office.
If I use this key I am getting the error. I there any way that I can use the volume license key on my laptop to validate the product.
