Windows 7 Ultimate 64Bit Won't Boot When 'Memory Remap Feature' Is Enabled
Mar 12, 2012
I will start off by stating my relevant PC Specs for this thread:-
Asus P5B Deluxe MoBo
Intel Dual Core E6600 @ 2.40GHz
GeForce 7900 GS 512Mb
2 x 1GB DDR2 800MHz Corsair Value RAM (original) in Yellow Slots A1 & B1
2 x 1GB DDR2 800MHz Corsair Gaming RAM (NEW) in Black Slots A2 & B2
So I have just installed 2 extra GBs of RAM to bring my total to 4GB. After a successful boot and then checking my 'System' info Windows states 4.00GB of memory is installed but only 2.94GB is usable.Therefore I went ahead into my BIOS to enable the 'Memory Remap Feature'.However on reboot the PC gets to the 'Starting Windows' screen and doesn't get any further. The Windows logo doesn't start to appear. It just restarts going through all the usual screens again, eventually giving two options of:-
Launch Startup Repair or Start Windows Normally. The repair never works and Windows will never start normally again until I return to the BIOS to disable the mem remap.I reset the CMOS to Factory Default settings and tried again but did nothing. Also I have never updated the BIOS from the original version as I'm a bit scared to do so.I have looked hear for info on voltages and clocking but didn't get anywhere. Well got an overclock at 3.60Hz but only ran in Safe Mode. Obviously this is slightly irrelevant the above but was just trying stuff out and trying to learn more.
View 2 Replies
ADVERTISEMENT
Mar 12, 2012
I will start off by stating my relevant PC Specs for this thread:-
Asus P5B Deluxe MoBo
Intel Dual Core E6600 @ 2.40GHz
GeForce 7900 GS 512Mb
2 x 1GB DDR2 800MHz Corsair Value RAM (original) in Yellow Slots A1 & B1
2 x 1GB DDR2 800MHz Corsair Gaming RAM (NEW) in Black Slots A2 & B2
So I have just installed 2 extra GBs of RAM to bring my total to 4GB. After a successful boot and then checking my 'System' info Windows states 4.00GB of memory is installed but only 2.94GB is usable.Therefore I went ahead into my BIOS to enable the 'Memory Remap Feature'.However on reboot the PC gets to the 'Starting Windows' screen and doesn't get any further. The Windows logo doesn't start to appear. It just restarts going through all the usual screens again, eventually giving two options of:-
Launch Startup Repair
or
Start Windows Normally.
The repair never works and Windows will never start normally again until I return to the BIOS to disable the mem remap.Sometimes I have had a Blue Screen displaying the same errors as this thread:-Windows 7 64Bit BSOD's (IRQ_NOT_LESS and BAD_POOL_HEADER)I reset the CMOS to Factory Default settings and tried again but did nothing. Also I have never updated the BIOS from the original version as I'm a bit scared to do so.Have read about graphics card using part of the mem (which doesn't seem right with the 7900 GS as has it's own onboard mem) and also that voltages to the RAM should be increased.
MCH Voltages
Windows 7 :: Win 7 Wont Boot With 4GB RAM
Windows 7 RC won't boot with 4gb
I have looked hear for info on voltages and clocking but didn't get anywhere. Well got an overclock at 3.60Hz but only ran in Safe Mode. Obviously this is slightly irrelevant the above but was just trying stuff out and trying to learn more.
View 5 Replies
View Related
Nov 26, 2011
wireless Windows7 64bits to connect desktop32bits with HP-usb-enabled printer
View 1 Replies
View Related
Aug 3, 2010
Can I upgrade from Windows ultimate 32bit ver 6.1 ( build 7600) to windows 7 ultimate 64bit edition and keep all of my installed programs and files ?[meaning not having them moved to a new folder called windows.old]
View 3 Replies
View Related
Feb 7, 2010
Windows 7 boots to a black screen. Running on a dell e520, I've used the dell diagnostics to scan all the hardware, no issues were found. Computer works more then fine when windows boots. boots into safe mode, and runs when i select the debug option from the safe mode boot menu. also booted once or twice without keyboard connected.
Whats inside the computer besides the processor and a hard drive? zotac 9800 gt : OC to 630mz with rivatuner (stable, machine doesn't boot with OC disabled) crappy sound blaster audigy.
The problem is recent, no hardware changes where made in the last 6 months. (problem never happened in xp)
Any ideas?
View 3 Replies
View Related
Aug 14, 2009
If I disable Network Boot in my BIOS I get Boot Failure when I try to boot. My Boot Options are CD/DVD/Hard Disk/Removable Drive. Do I have a problem? or should Network Boot always be enabled?
View 3 Replies
View Related
Dec 29, 2012
how can i change my 32 bit win7 ultimate free dos to 64 bit win7 ultimate?can i do it without charge? where can i get it done?? can i get the iso/disk in downloadable format?
View 6 Replies
View Related
Jul 10, 2010
I was wondering how many Gigs is Windows 7 ultimate?Not how many ram and memory it takes up on the disk, but stand alone, how many gigs is the cd itself
View 3 Replies
View Related
Mar 29, 2011
Tech Support Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 32 bitProcessor: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz, x64 Family 6 Model 15 Stepping 13Processor Count: 2RAM: 3581 MbGraphics Card: ATI Mobility Radeon HD 3650, 256 MbHard Drives: C: Total - 294853 MB, Free -237438 MB; D: Total - 10239 MB, Free - 5380 MB;Motherboard: Dell Inc., 0YP950, , .J6NHWG1.CN4864386C1101.Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and EnabledI have a Lexar Twist and Turn memory stick that will not open or load to Windows7 Ultimate. It tries to load driver but will not load successfully
View 4 Replies
View Related
Mar 21, 2012
I have a Intel i5 2500k 3.3Ghz, with 4GB memory running on windows 7 ultimate 64 bits. My problem is, since I changed the OS to this "more advanced", I cannot play Flight Simulator 2004 without this error message that closes the game. "Insufficient memory, please check your hard drive..." My system only has Flight Simulator installed, plus microsoft office and Avg antivirus (not counting with all the system updates, drivers etc). I don't understand this problem, because before this OS, I had Win XP 32 bits, with a lot more programs and addons installed and running, and I never had this problem...even with all the graphics pumped up to the max in the game. My graphic card is Asus En9800GT nvidia with 1gb ddr3 and HD with 400GB still to use (same board and HD used with XP).
View 4 Replies
View Related
Jun 5, 2011
I'm running Win7 Ultimate 32 bit and I believe it's using too much memory. When the system is idle and not even running Steam or Firefox, memory usage is 1.00 GB out of my 2.00 available. I run FRAPS and DisplayFusion (I have two monitors) in the background but they amount to roughly 20MB.I have also disabled most non-essential services as well as unnecessary boot programs. Usually I have ~45 processes running, 15 of which are user processes.I have already made efforts to streamline my OS, and the total memory usage of all my user processes amounts to just under 400 MB (with Firefox and Steam running). That's nice, and it's about what XP idled on.What the hell does Win7 do with 500-600 MB of phantom memory?
View 4 Replies
View Related
Dec 9, 2009
my windows 7 64 bit system is only seeing 2.87gb of the 4gb installed memory. checking the Resource Monitor, it says 1153gb has been allocated to Hardware Reserved. any idea how i can use all the memory? i have already tried unchecking Maximum memory under msconfig/boot/advanced options without success. below is my system properties. i have flashed my system with the latest bios.
OS NameEnter text here. Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name SOLO-PC
[code]....
View 21 Replies
View Related
Dec 13, 2009
I have an MSI Wind 123 netbook and, for some odd reason, MSI put the Fn key to the left of the Ctrl key on the far left hand side of the bottom row. This is a real nuisance.
Can anyone tell me how to swap functionality of the two keys, so it is consistent with my other keyboards?
View 9 Replies
View Related
Mar 19, 2012
I have Win7 64bit with 6GB memory. The Windows System control panel agrees with that showing 6GB ram and nothing about a limitation. But today I was opening a lot of files and the program wouldn't let me open more files after Windows memory use reached 4GB. Task Manager showed 4GB used out of 6GB. I tried opening another file with a different program and my screen flickered and the program shut itself off, so it looks like the problem is with Windows and not the other programs. How do I get Windows to use all available memory not just 4GB out of 6GB?
View 13 Replies
View Related
Aug 28, 2012
While installing a printer software, a "insufficient memory, need 55 mb to install" message appears and installation stops. I have 366GB available in HD and 4GB RAM.
What can I do?
View 2 Replies
View Related
Mar 2, 2011
Can I boot Windows 7 64bit on a 32bit processor if the Windows installation took place on a 64bit processor?
View 10 Replies
View Related
Jun 17, 2011
I just rebuilt my computer, new motherboard and such and it has 6 GB of ram installed but it is only using 2 GB and has 4 GB hardware reserved. I have went and set the bios settings to memory remapping, I have tried reinstalling windows, I've tried unchecking the msconfig max memory, resetting the ram, and resetting the bios.
In the Systems window it reads that there is Total 6 GB Memory and only 2 GB usable, and in the Bios in the System information it also reads only 2 GB usable memory. The ram sticks aren't new, I took them form my old computer when I did the rebuilt, which are 3 Elipida 2GB 1333 MHz sticks. The motherboard is a Maximus III Gene with bios version 2103. OS is Windows 7 Pro 64 bit.
View 8 Replies
View Related
Jan 28, 2012
I tried looking online about this I need to know if there's a big difference between 12GB of system memory and 16GB of system memory. I don't play many games but I do convert HD videos a lot and these programs are a pig on ram. I have 8GB now and have ordered 2 4GB sticks and was wondering if I should stay with 2 4GB sticks and 2 2GB sticks(total12GB) or should I upgrade to 16GB.
View 7 Replies
View Related
Nov 30, 2012
I currently run win 32bit with 4g or RAM (2.75 useable). It I were to upgrade to win 64 bit would I get the 1.25g of memory back?
View 5 Replies
View Related
Nov 17, 2012
I have a racing wheel, and currently the only way to have pressure sensitive pedals is having them both on the same axis, the y axis. Unfortunately, this means pressing them both at the same time means they cancel eachother out, and doesn't do anything. How do I remap one of the pedals to the currently unused Z axis?
View 5 Replies
View Related
Jan 26, 2012
I am running Win 7 64bit and have 16GB of DDR3 ram. However I receive messages my IE is using high memory. What does this mean and how do I cure it?
View 4 Replies
View Related
Jul 26, 2012
I've had 4gigs of RAM installed for very long and I was able to work fine with my browser open + Photoshop and Blender in Win XP. I've quite recently upgraded from Win Xp 32bit to Win 7 64bit. After installing Win 7 64bit I added 2x1GB sticks into my system to take advantage of memory I had available. These "new" sticks were of lower clocks than my 2x2GB I had installed so I tested clocking them higher. Well that wasn't really stable so I figured running them at lower clocks wouldn't hurt all that much.
So everything seemed to work fine, Memtest didn't whine about anything and everything seems to work well enough. Now however I can't have my browser + the other programs open at the same time but windows keeps whining about it running out of memory even though the taskbar memory amounts don't add up at all. I have like 5Gigs used but adding everything doesn't even get up to 2Gigs. I know about windows keeping unused memory ready for use but it doesn't seem to be that or otherwise I don't know why my programs keep crashing all the time.
I have a load of tabs open in my browser but they don't take all that much memory. And I don't have any other programs open that would use that much for anything. My display turns black sometimes and sometimes (not every time) after that I get the display driver error and that it's recovered. I've had this very seldom before but now it seems quite common so I figured it might have something to do with that the display driver doesn't get enough memory to use either. Just a wild guess but textureloading in Blender doesn't work all the time etc. so it seems like a vRAM problem to me.
View 9 Replies
View Related
Aug 25, 2011
My friends pc has windows 7 ultimate 64 bit with 2 gb ram.it runs too much slow.it has an intel core 2 duo processor. Is it good to have an 64 bit os with just 2 gb of ram? I think this thing is the culprit causing the computer to run slow.
View 2 Replies
View Related
May 7, 2012
System was fine. Started it up this morning and all my sound was gone. I've re-installed the Asus drivers 50x. Tried the same in Safe Mode. I am using an external speaker set-up. They are Altec Lansing speakers. They have a powered sub and left and right main speakers and also left and right rear speakers. I don't have the rear speakers connected and I haven't for years(without issue).Anyway, booted up this morning and I have no sound from Windows, the internet, or my music or movies.
View 14 Replies
View Related
Jul 28, 2011
I am a little annoyed that after buying 2 games from EB Games today, Aliens V's Predator and Apox, they both need "Steam" to install properly. I have installed steam and it tells me that i have no internet connection. I have a wireless internet connection and steam does not pick it up at all. i have tried uninstalling and reinstalling, i have down loaded the latest steam from the web site and i still get the same problem.
View 2 Replies
View Related
Oct 29, 2012
I've a 2 years old laptop - Lifebook AH550 with:
i5-430M
Windows7 Ultimate 32-bit SP1
4GB RAM (DDR3,SODIMM, 1066MHz)
320GB HDD at 5400rpm
1695MB Shared Graphics
I'm planning to replace the 32-bit OS with 64-bit Windows 7 Ultimate. This laptop can support 8GB as mentioned in the catalogue. I guess the processor i5-430M is the first generation processor. I'm getting two 4GB RAM modules fairly cheap with same speed specifi'x.
I've no plans to trade off this laptop because its a rare "breed" - Made in Japan by Fujitsu and after 2 years of service it still runs extremely well.
View 5 Replies
View Related
Oct 1, 2010
Which Antivirus For My 64 Bit Windows 7 Ultimate ?As i Had Quick Heal Total Security 2010 64 bit . But After Trying to Install The Quick heal It shows error and Does not Install completely.Is There Virus Which Is Disallowing The Antivirus to Install.
View 5 Replies
View Related
Jul 5, 2011
I've been trying install Windows 7 Ultimate 64bit on my Compaq Presario F700. It came with Windows Vista (Don't know which version). It then became corrupted, so I installed Ubuntu 10.10 on it, then I DBANed it, Now it won't install Windows 7. It says that Bootmgr.exe is missing. I tried a repair disk, I tried the bootrec (don't know if i'm doing it right).
View 8 Replies
View Related
Oct 25, 2009
I changed my OS to Window 7 Ultimate 64 Bit, no I can`t run left 4 dead in my system! when I trying to start left 4 dead, a message said application Stop working!
View 10 Replies
View Related
Nov 24, 2012
I bought a new Desktop PC and it has the win 7 30 day trial.I need to install my Win 7 ultimate 64bit to my PC, deleting the 30 day trial. ( I need to know how to start the setup when the PC is booting up, most importantly)
[code]...
View 11 Replies
View Related
Jul 19, 2012
i would like to use custom themes on a school computer that does not have admin, so i thought i could just use batch to make windows think the folder is in another location. i coded this: [code] but it does not work and any theme that i put in that test folder does not show up. i also shut down explorer.exe and used explorer++ to launch the batch file to try to make sure the changes were being applied, but it still didnt work.
View 2 Replies
View Related
