Windows 7 64bit Hardware Reserved Memory
Jun 17, 2011
I just rebuilt my computer, new motherboard and such and it has 6 GB of ram installed but it is only using 2 GB and has 4 GB hardware reserved. I have went and set the bios settings to memory remapping, I have tried reinstalling windows, I've tried unchecking the msconfig max memory, resetting the ram, and resetting the bios.
In the Systems window it reads that there is Total 6 GB Memory and only 2 GB usable, and in the Bios in the System information it also reads only 2 GB usable memory. The ram sticks aren't new, I took them form my old computer when I did the rebuilt, which are 3 Elipida 2GB 1333 MHz sticks. The motherboard is a Maximus III Gene with bios version 2103. OS is Windows 7 Pro 64 bit.
View 8 Replies
ADVERTISEMENT
Jan 2, 2010
I have 8GB of memory installed (GA-P55M-UD4 and Xeon X3440), but in the System information it says only 4GB is usable, and when I go to resmon, it shows that 4GB is "Hardware Reserved". I don't have any special settings, but seems like too much is lost somewhere. Any help would be appreciated!
View 2 Replies
View Related
Mar 31, 2012
Is there any way to reduce my Hardware Reserved Memory in my RAM. I have already unchecked MAX Mem in MSConfig.
View 8 Replies
View Related
Dec 9, 2009
my windows 7 64 bit system is only seeing 2.87gb of the 4gb installed memory. checking the Resource Monitor, it says 1153gb has been allocated to Hardware Reserved. any idea how i can use all the memory? i have already tried unchecking Maximum memory under msconfig/boot/advanced options without success. below is my system properties. i have flashed my system with the latest bios.
OS NameEnter text here. Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name SOLO-PC
[code]....
View 21 Replies
View Related
Mar 19, 2012
I have Win7 64bit with 6GB memory. The Windows System control panel agrees with that showing 6GB ram and nothing about a limitation. But today I was opening a lot of files and the program wouldn't let me open more files after Windows memory use reached 4GB. Task Manager showed 4GB used out of 6GB. I tried opening another file with a different program and my screen flickered and the program shut itself off, so it looks like the problem is with Windows and not the other programs. How do I get Windows to use all available memory not just 4GB out of 6GB?
View 13 Replies
View Related
Aug 28, 2012
While installing a printer software, a "insufficient memory, need 55 mb to install" message appears and installation stops. I have 366GB available in HD and 4GB RAM.
What can I do?
View 2 Replies
View Related
Jan 28, 2012
I tried looking online about this I need to know if there's a big difference between 12GB of system memory and 16GB of system memory. I don't play many games but I do convert HD videos a lot and these programs are a pig on ram. I have 8GB now and have ordered 2 4GB sticks and was wondering if I should stay with 2 4GB sticks and 2 2GB sticks(total12GB) or should I upgrade to 16GB.
View 7 Replies
View Related
Nov 30, 2012
I currently run win 32bit with 4g or RAM (2.75 useable). It I were to upgrade to win 64 bit would I get the 1.25g of memory back?
View 5 Replies
View Related
Jan 26, 2012
I am running Win 7 64bit and have 16GB of DDR3 ram. However I receive messages my IE is using high memory. What does this mean and how do I cure it?
View 4 Replies
View Related
Jul 26, 2012
I've had 4gigs of RAM installed for very long and I was able to work fine with my browser open + Photoshop and Blender in Win XP. I've quite recently upgraded from Win Xp 32bit to Win 7 64bit. After installing Win 7 64bit I added 2x1GB sticks into my system to take advantage of memory I had available. These "new" sticks were of lower clocks than my 2x2GB I had installed so I tested clocking them higher. Well that wasn't really stable so I figured running them at lower clocks wouldn't hurt all that much.
So everything seemed to work fine, Memtest didn't whine about anything and everything seems to work well enough. Now however I can't have my browser + the other programs open at the same time but windows keeps whining about it running out of memory even though the taskbar memory amounts don't add up at all. I have like 5Gigs used but adding everything doesn't even get up to 2Gigs. I know about windows keeping unused memory ready for use but it doesn't seem to be that or otherwise I don't know why my programs keep crashing all the time.
I have a load of tabs open in my browser but they don't take all that much memory. And I don't have any other programs open that would use that much for anything. My display turns black sometimes and sometimes (not every time) after that I get the display driver error and that it's recovered. I've had this very seldom before but now it seems quite common so I figured it might have something to do with that the display driver doesn't get enough memory to use either. Just a wild guess but textureloading in Blender doesn't work all the time etc. so it seems like a vRAM problem to me.
View 9 Replies
View Related
May 19, 2012
I have an Acer Aspire 5532 running Windows 7 64 bit with 3.00 GB ram and I have 2.75 GB of ram saying unusable. My computer is and has been very slow and I haven't recently added or removed any hardware.I have checked 2 possible problems from info I found on this problem being I've located msconfig, boot, advanced options, max memory is "unchecked" and have checked my bios which do show the correct amount of memory but I can not enable "memory remap" because bios does not support. I've added a resource monitor screen shot below.
View 1 Replies
View Related
Mar 12, 2012
I will start off by stating my relevant PC Specs for this thread:-
Asus P5B Deluxe MoBo
Intel Dual Core E6600 @ 2.40GHz
GeForce 7900 GS 512Mb
2 x 1GB DDR2 800MHz Corsair Value RAM (original) in Yellow Slots A1 & B1
2 x 1GB DDR2 800MHz Corsair Gaming RAM (NEW) in Black Slots A2 & B2
So I have just installed 2 extra GBs of RAM to bring my total to 4GB. After a successful boot and then checking my 'System' info Windows states 4.00GB of memory is installed but only 2.94GB is usable.Therefore I went ahead into my BIOS to enable the 'Memory Remap Feature'.However on reboot the PC gets to the 'Starting Windows' screen and doesn't get any further. The Windows logo doesn't start to appear. It just restarts going through all the usual screens again, eventually giving two options of:-
Launch Startup Repair or Start Windows Normally. The repair never works and Windows will never start normally again until I return to the BIOS to disable the mem remap.I reset the CMOS to Factory Default settings and tried again but did nothing. Also I have never updated the BIOS from the original version as I'm a bit scared to do so.I have looked hear for info on voltages and clocking but didn't get anywhere. Well got an overclock at 3.60Hz but only ran in Safe Mode. Obviously this is slightly irrelevant the above but was just trying stuff out and trying to learn more.
View 2 Replies
View Related
Jun 28, 2012
I have 6GB of ram installed on windows 7 64-bit ultimate. For some reason I'm noticing that the usage will rise past 50%, but I am unable to find all of the used resources. From what I found, I'm using roughly 3.2GB of RAM when I add up all the memory usage under the processes tab.
View 9 Replies
View Related
Mar 26, 2011
where can i find it for nForce 410/430 MCP?
View 1 Replies
View Related
Jul 15, 2012
So my problem is I use to have 5.74GB of ram usable out of 6.00GB. Since a restart of my computer there is now only 1.74GB out of 6.00GB.So I have a 64-bit Windows 7 Home premium SP1.The ram is 1066MHz with 1 x 4GB and 1 X 2GB.I only have 2 slots on the computer.
View 6 Replies
View Related
Jun 15, 2012
I recently opened a minecraft server, not knowing that online my minecraft would run slower. I'm not 100% sure if its because i only have MB of dedicated video memory, but i'm pretty sure it isIs there anyways i could increase this or get other options on how to help my computer run minecraft
View 3 Replies
View Related
Mar 12, 2012
I will start off by stating my relevant PC Specs for this thread:-
Asus P5B Deluxe MoBo
Intel Dual Core E6600 @ 2.40GHz
GeForce 7900 GS 512Mb
2 x 1GB DDR2 800MHz Corsair Value RAM (original) in Yellow Slots A1 & B1
2 x 1GB DDR2 800MHz Corsair Gaming RAM (NEW) in Black Slots A2 & B2
So I have just installed 2 extra GBs of RAM to bring my total to 4GB. After a successful boot and then checking my 'System' info Windows states 4.00GB of memory is installed but only 2.94GB is usable.Therefore I went ahead into my BIOS to enable the 'Memory Remap Feature'.However on reboot the PC gets to the 'Starting Windows' screen and doesn't get any further. The Windows logo doesn't start to appear. It just restarts going through all the usual screens again, eventually giving two options of:-
Launch Startup Repair
or
Start Windows Normally.
The repair never works and Windows will never start normally again until I return to the BIOS to disable the mem remap.Sometimes I have had a Blue Screen displaying the same errors as this thread:-Windows 7 64Bit BSOD's (IRQ_NOT_LESS and BAD_POOL_HEADER)I reset the CMOS to Factory Default settings and tried again but did nothing. Also I have never updated the BIOS from the original version as I'm a bit scared to do so.Have read about graphics card using part of the mem (which doesn't seem right with the 7900 GS as has it's own onboard mem) and also that voltages to the RAM should be increased.
MCH Voltages
Windows 7 :: Win 7 Wont Boot With 4GB RAM
Windows 7 RC won't boot with 4gb
I have looked hear for info on voltages and clocking but didn't get anywhere. Well got an overclock at 3.60Hz but only ran in Safe Mode. Obviously this is slightly irrelevant the above but was just trying stuff out and trying to learn more.
View 5 Replies
View Related
Jul 10, 2010
i was trying to reformat my pc last night (windows 7 to windows 7, just doing a clean reformat).now, i have 3 partitions in my hdd. system reserve, OS partition and my personal partition. i decided to delete my OS partition, then proceeded to delete my system reserve (it allowed me to, don't know why). I then created a new partition. My pc now has only 2 partitions. When I try to install to my new OS partition, it says that "Setup was unable to create a new system partition blah blah" The usual msg. I tried doing the Active thingy on the diskpart but I still can't install my Windows 7
View 4 Replies
View Related
Sep 18, 2010
I bought a new computer where Windows 7 is already pre-installed on partition C:. In addition I want now to install a second "test" Windows 7 system on new primary partition. And a logical "data" partition. At startup I want to choose later between the 2 Windows 7 systems which one I want to boot.
When I inspect now the current partition table (before changing it) it looks like:
1.) "Recovery" 10 GB Primary MBR NTFS
2.) "System Reserved" 100 MB Primary NTFS, Active, System
3.) "Local Volume" 30 GB Primary MBR NTFS Boot
4.) Unallocated
As you can I have a problem: If I create a new, 4 th primary, bootable partition with 30 GB into the "unallocated" space, then all maximum 4 primary partitions are filled. I cannot create a 5 th primary partition which contains the logical "data" partition. So I guess I must either destroy "Recovery" or "System Reserved" primary partition to have one more primary partition slot available.
Now what for are the "Recovery" and the "System reserved" partition? I don't know them from WinXP. Are they Windows 7 specific? Or are they "inventions" from the computer manufacturer (Sony)? Is "Recovery" absolutely necessary? Why is "System Reserved" active? From I WinXP I know only partitions as active which hold the OS and not some kind of "pre-boot-partitions"
View 2 Replies
View Related
Mar 26, 2012
How do I eliminate the 100mb partition when doing a clean install? I will be doing this soon and would like to eliminate this.
View 4 Replies
View Related
Jun 28, 2010
I installed Windows 7 RTM 7600 on a new hard disk (previously not partitioned), so I have had the 'system reserved' partition created at Windows 7 initial installation time. I have several of problems with Windows 7, so I would like to reinstall it, but by keeping programs and files. The problem is that the Install file setup.exe looks into 'system reserved' partition rather than checking the C:/ hard drive, and as such does not want to proceed with the reinstall because of a lack of disk space (100 Mo only on 'system reserved' partition)...
- How could I do so making the install looking at C:/ rather than at that partition?
- And during the reinstall could I do so that this partition is not created anymore?
View 9 Replies
View Related
Sep 11, 2010
I have bought a new hard drive to use as my main one, and am planning to use my current, larger one as backup, as i found i was not filling it. So i need to completely duplicate my current drive, a 1tb one, with 180gb of stuff, to my new 320gb drive. i have made a full disc image with driveimage xml, which comes to 180gb, but when i try to restore it to the 320gb one, it says it it too big. How do i gp about setting this up? do i need to copy the system reserved partition to the new drive too for windows 7 to work, or can it not be copied? should i install windows 7 to the new drive from my install disc? if so, how to i get my settings, programs and data back without too mcuh hassle?
View 2 Replies
View Related
Feb 16, 2012
I have a Windows 7 Professional system that I went to take an image of using EASEUS TODO Workstation. When I went to do the backup, I noticed that there was no 100 MB System Reserved Partition. I made the image anyway.When I tested the image on a new machine, it prompted me to repair or start windows normally. Unable to start normally, so I did the repair. After about 10 min, the system came back and said it cannot repair.Outside of start a system from scratch, is there a way I can get the system reserved partition out of the Windows 7 partition?
View 5 Replies
View Related
Jul 14, 2012
previously i have windows xp on my lappy. then i removed it and installed windows 7. but it wasnt restart. then with the help of windows recovery somehow i restared. but some of the drivers are not installing, and showing that system doesnot meet minimum requirments. then i tryed to find the problem. i observed that system reserved partition was not created. so i reinstalled windows.
View 3 Replies
View Related
Mar 5, 2010
because one picture says more than a thousand words I will post pics first. Why is windows marking those 2gb of ram as reserved? is there any way that I could undo this? if more info is needed just let me know.
View 9 Replies
View Related
Nov 4, 2011
Disk 0 contains two partitions: System Reserved (active) and C: Disk 0 is dynamic
Disk 2 is unallocated Only the System Reserved partition can be mirrored, "add mirror..." on C: is greyed out. If I mirror System Reserved, I still can't mirror C:
I am guessing if I make C: active, my system won't boot?
View 3 Replies
View Related
Mar 30, 2012
I recently built my first computer and all was going well until i went to install Windows 7. I get to the custom install and i only have one hard drive but that hard drive to install it on is OEM reserved and when i try to format it i get an error message i believe 0x8007005 something (forgot the number after 5 but it is either a 8 or a 6 or 2 sorry). I do not have a disc to install the drivers which the guy from microsoft said i should have but i do have a motherboard driver disc. I don't know what delete does and have not tried it.
View 2 Replies
View Related
Feb 17, 2013
I have just reinstalled WIN 7 Home Prem 32bit on a 'Acer Aspire 5741G' 4GB Ram 512mb Dedicated HD Raedon 5### Series And Windows is saying 4GB (2.5GB) usable.BEFORE the reinstall and from purchase date it was saying 4GB (3.5GB) usable.I believe the extra 1GB is gone to the Graphics.The GPU begin dedicating and NOT integrated cannot be change via the BIOS.I have tried resetting the RAM, Windows RAM diagnostics tool (RAM is healthy) and various RAM tools to try and free up the reserved ram. even taking it complete out and putting it back in. I am aware of this as there is only 4GB installed. the issue lays with 1.5 being reserved with only 2.5gb being useable when before the install and when purchased there was 3.5GB usable.
View 1 Replies
View Related
Apr 24, 2012
Right now i have c: partition and system reserved partition which is 100mb and active bootable partition. How can i merge system reserved and "c" partition and make system bootable. When I am trying to merge those two using acronis disk director ,it says cant merge. [URL]
View 2 Replies
View Related
Dec 22, 2011
For some reason i have to change my partition table from MBR to GPT. So i made a backup of my c drive using Acronis. But when i tried to restore my Windows, I got a message BOOTMGR missing press cntrl+alt+del to restart. Then i came to know that ultimate edition has a hidden partition called system reserved. Is there any way to restore my windows with same programs and drivers. Something like reinstalling windows 7 x64 ultimate and replacing everything by backup except boot files?
View 8 Replies
View Related
Jan 6, 2012
I accidently deleted my system reserved partition I only have one system installed on my pc, so no dual boot is needed or anything, I think it created a seperate system partition because of a windows.old folder, which has already been deleted now, because it took too much space. So now when I start up my pc i get the error that my bootmgr is missing. I tried repairing it by inserting the windows 7 dvd and using the repair, but when I click on windows 7 and i try to repair it it says it's the wrong version of windows. My language settings are set correctly so that's not the problem. I then tried to do it by pressing shift + f10 to get into the command line and using the following commands: Bootrec.exe /FixMbr Bootrec.exe /FixBoot Bootrec.exe /ScanOs Bootrec.exe /RebuildBcd however the scanos and rebuildbcd can't find any windows installation. If i put in my windows 7 dvd and i startup my pc, it works fine, because it then uses the bootmgr from the Windows 7 dvd. So I thought, let's just copy the bootmgr.exe to my windows. But this didn't work either.
View 8 Replies
View Related
