Device Cannot Start
Jun 19, 2011Microsoft Teredo Tunneling Adapter
View 1 RepliesMicrosoft Teredo Tunneling Adapter
View 1 RepliesMy webcam is not working on skype and when i go to check the image device i get this (This device cannot start. (Code 10)... message on the property.
View 2 Replies View RelatedI am getting this error in device manager over and over and over, i have uninstalled the driver, and reinstalled it over and over, i keep getting the same error, my hauppauge colossus card was working perfectly then all of a sudden i get this error, i have used ccleaner to repair my registry all to no avail, I think i need to do something in the registry to fix this but have no idea exactly what. What do i do?
View 12 Replies View RelatedI have a Nikon Imaging scanner which my PC detects on connection. I have the correct driver which device manager installs with a code 10 error, the device cannot start.My PC is running Windows 7 64bit. I should point out that the scanner works correctly on my old PC running Windows XP, so there is no problem with the hardware. Anyone got any ideas why I might be getting the code 10 error on my new PC?
View 6 Replies View RelatedI've done a fresh install of Windows 7 yesterday on my desktop PC and I want to use the virtual PC for some USB hardware that doesn't have any x64 drivers.
I can choose the USB devices fine in the virtual machine, they are detected and XP starts the usual hardware install wizard.
However one of my devices gets the yellow exclamation mark in the device manager with a code 10 (device cannot start).
The virtual machine runs XP SP3, my laptop runs XP SP3 as well and there is no problem on there with this hardware. This leads me to believe that it might be a windows 7 Vmachine issue that is causing this.
I've tried removing the hardware and installing it again, but that didn't solve the problem.
Any ideas for a possible solution?
have a problem with my ps 2 standard keyboard it generates the error code 10(this device cannot start) so I cannot use my keyboard
View 1 Replies View RelatedI need solution to the problem: Error message received. Error: unable to start bluetooth stack device. I use windows 7 Home Premium and my laptop is Dell Inspiron 1420 /32 bit.
View 2 Replies View RelatedMy Toshiba Satellite L755 is receiving the following error at startup:
Check cable connection!
PXE-M0F: Exiting Intel PXE ROM.
No bootable device -- insert boot disk and press any key
This occurred after I used Toshiba Wizard to clear the hardrive. I was attempting to get everything back it's original state.
So far I have gotten into setup by holding f2 at startup. The boot tab reads:
1. HDD/SSD Hitachi HTS545050B9A300 (S1)
2. USB
3. ODD TSSTcorp CDDVDW TS-L633F (PM)
4. FDD
5. LAN Atheros Boot Agent
I have also tried disconnecting the battery and harddrive and then reconnecting them.
NO BOOTABLE DEVICE--INBSERT BOOT DISK AND PRESS ANY KEY FOR REALTEK RTL8102EPCI-E ETHERNET CONTROLLER v1.07 (080320) media test failure, check cable
View 2 Replies View RelatedI have uninstalled and reinstalled (admin) the latest driver several times. I dont have any USB 3 devices yet and have nothing plugged into a USB 3. I am starting to think my last option is to disable all USB 3 on my computer but when I get a USB 3 I will be screwed.
View 1 Replies View RelatedC-Media AC97 Audio Device. This device cannot start. (Code 10). Sound hardware on ASUS Mobo will not work after installing Windows 7. Latest drivers installed.
View 9 Replies View RelatedWindows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
View 1 Replies View RelatedWindows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
I keep getting this message when trying to start a cd rom or dvd disk.
my computer uses Matshita DVD-RAM UJ890AS ATA Device...I think this is part of problem...I have a Gateway NV53A computer.
Microsoft Teredo Tunneling Adapter - Device cannot start. How can I fix that?
View 1 Replies View RelatedI have a compaq presario V3000 (mine is a V3015nr), When I bought it, it had windows xp and the ethernet and wireless connection worked well, then, I decided to upgrade it to win 7, but then, the drivers just crashed, I fixed this and everything was working well, but then, this error appeared and since that I'm unable to use wireless connection. I've searached a lot of drivers but all of them are for Windows xp, or windows 7 x64.. Mine is an Windows 7 ultimate x32
View 2 Replies View RelatedWhen I install the Drivers for SoundMax Integrated Digital Audio device, message appears This device cannot start (Code 10).
View 3 Replies View Related'Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)' i messed up some part in the registry how do i get the filwes back
View 5 Replies View RelatedI have a pc that has been running windows 7 pro fine for a couple of years. Today it wont boot stopping with the message: "Windows failed to start.A recent hardware or software change might be the cause."
To fix the problem:
1.Insert windows installation disc and restart your computer
2.Choose your language settings and then click "next"
3.Click "repair your computer".
If you do not have this disc contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
This machine has only one dvd drive and one hdd. I have checked the boot list in the bios settings and the cd drive is first then the hdd second. If I insert the windows 7 cd and press any key to boot from cd when prompted I still end up at the "windows failed to start " screen. At this point I have the option to select "Launch startup repair" or "start windows normally" but I cant select them, the machine just counts down and continues to try to launch startup repair and fails with the 0xc000000e error.
Okay, so this just happened out of nowhere. Nothing seems to have led up to this -- the system booted and shut down successfully, and no software updates or installs were done during the period of time it was on when it was last working. I've attempted many things, but none seem to work. /ScanOs reports no OS detected, while startup repair said the OS was booted successfully. bcdedit also shows no directories linked to "unknown". CHKDSK reports no bad sectors, so such can be discarded. This happens every time I attempt to boot to Windows 7 (Home Edition, x64). I have a copy of Fedora 17 set to dualboot with it
View 14 Replies View RelatedI am receiving a "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)None of my USB ports are working. I have tried to update driers, and modify the registry, but nothing seems to work. I don't have a way to get the information off my system, as none of the ports work, so I can't reset the machine to factory settings.
View 1 Replies View RelatedI have an emu 1820m soundcard installed in my computer. It seems to be functioning perfectly. I can play dvd'd, cd's, iTunes, etc and the sound plays through my speakers without a problem. I want to record some sounds from a dvd but i cant get anything to record. Recording device is set to Wave EMU DSP as the default device. Im using Audacity to record and have set the recording preference device to be Wave (E-MU _-DSP). When I hit record I get an error 'Error while opening sound device. Please check the input device settings and the project template'And I cant record anything.In the built in Windows sound recorder, when I hit record, I get this error 'An audio recording device cannot be found' Everything seems to be functioning perfectly, yet i just cant record anything.
View 8 Replies View RelatedI have a hp pavilion dv9700 running windows 7 home premium,and the atheros wireless device keeps disapearing out of the device manager and stops working sometimes it works again if i reboot ,i have tried a replacement but the same happens.
View 4 Replies View RelatedHow do i figure out what driver or even component windows wants software for when in the device manager under other devices it lists an unknown device and windows update cannot find anything.
Oh and is it appropriate for me to use this topic to ask another question regarding explorer.exe as while i am inside a folder i delete (by choosing delete from the context menu in the tree view) while inside that folder on this particular laptop PC explorer. always crashes, collect information, sends it and restarts explorer. I have not experienced this problem on any other pc running any version of windows 7, oh and the same happened with build 7264 x32 and the current install of build 7600 x64.
Have recently purchased a small usb inspection snake camera with led light and when testing it plugged it into two desktops computers (one xp pro not sure of the other as it was a network work computer) It automatically loaded the drivers and brought up a screen automatically with the realtime image.(no driver disc came with it). However plugging into my windows 7 64bit sony laptop it signals a connection beep, loaded drivers automatically but wouldn't open or show up on my computer disc manager as an external usb source to click on. It does however show up on device manager as a usb camera and when I unplug and replug in it disappears and reappears so I know I have the right camera (not the lap top webcam inbuilt one that shows USB 2 Camera). Have tried updating drivers automatically and uninstalling it etc. Need it to work on the lap top so it can act as the movable screen for it?
View 29 Replies View RelatedIf i remove/uninstall 'High Definition Audio Device' Driver in Device Manager will Windows Update find it again?Because im having crackling issues basicly the sound is really choppy and choppy basicly and it makes my ram go to 100%
View 2 Replies View RelatedMy device shows in device manager with yellow exclamation. when try to update it says my drives are up to date when i restart it tells me cant find suitable drives for this device.
View 1 Replies View Relatedwhat will i do, there is no usb mass storage device driver detected in the device manager of my laptop.
View 3 Replies View Relatedsound to work after up dating to windows 7 ... i have a m3n72-d asus mother board ...how the hell do i get the onboard sound to work ..point me in the right direction of a driver ..that works i have tried loads ...the media and pci are showing yellow icons ..and windows cannot find the drivers?
View 2 Replies View RelatedI got a new hard drive for my HP Pavilion DV6T-6000. Installed windows 7 ultimate and a bunch of drivers from HP's drivers section for my computer and I still have this unkown device. It wasn't there on my old drive so something isn't right here.
Location: on Microsoft ACPI-Compliant System
Status: The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. Hardware ID:ACPIHPQ0004
i cant install nvidia drivers " this graphics driver could not find compatible graphic hardware", and i can't see my nvidia card on the device manager, and can't get the hardware ID, it looks like my laptop doesn't have this graphic card installed.
my latop is: ASUS - K52JC
2 graphics card, intel shared, and separated nvidia ( 310m cuda - 1GB )
i tried to follow this procedure, Fix Latest nVidia Mobility Driver to Fit Your Notebook
but couldn't find device ID, because it is not listed on device manager
When I went to add a new Bluetooth keyboard (Control Panel>Add Devices).When pressing Add Device, nothing happens.I have two Bluetooth devices already installed, are listed under "Devices" are "found" and work fine.Problem is that, I can not either add new devices or, remove any of my Bluetooth devices already installed.Click Add Printer - fine, the wizard starts.Add Device - nothing."Remove Device" - when a device is highlighted for removal, the system appears to be "working" for a moment, but then does not remove the device, it remains.Have checked that Services related to Bluetooth have not been disabled but am wondering if anyone knows if there are any specific services that would be required for Add Devices or Removal of Devices to function? (HID Devices and Plug and Play are Started / Automatic)
View 4 Replies View Related