I attempted to move my Win 7 OS from a smaller (original) drive to a new "used" larger HDD.Unfortunately I wound up with the boot files and system files on separate HDD and cannot boot from the disc I moved the OS too without the original HDD configured into the system.
View 1 RepliesJust after booting-up my system is prompting me that two dll files are not loading. I have investigated the necessity of the dll files and they have no relevance to the OS or anything I am using. How would I stop the system from attempting to load these files?
View 9 Replies View RelatedBoot files etc have installed on C and not system reserved, why?Is it because I increased the size of the system reserved and then (maybe I) left the larger partition highlighted by mistake?I used Windows own install disk to format etc.
View 9 Replies View RelatedI used to have Windows 7 which works flawlessly... I used to have linux Mint 11 dual booting with Windows 7, I recently upgraded to Linux Mint 12 and from that upgrade I cannot see the windows 7 option in the boot menu.. I tried to reinstall the boot loader of windows 7 from the Windows 7 CD but when I press "Repair Your Computer" then it does not show any operating system existing on my computer... install the boot menu in the MBR again.
View 1 Replies View RelatedI'm running Windows 7 Professional 64-bit and having the same problem. You can easily resolve the "Hidden File" problem by right clicking on the file, select Properties, and remove the check box next to "Hidden". If you tagged all the photos in a folder, simply select all (ctrl-A) and do the same. It solved the hidden file problem for me without having to show all hidden files.The problem I'm running into that I can't fix is that even after doing this, Carbonite now recognizes these files as system files and refuses to back them up. Even if you try to manually force Carbonite to back them up, it immediately unselects the check box. Hopefully somebody knows of a solution. It's weird, because I was tagging photos just a few weeks ago, and didn't have any problems at all. I don't know if there was an update at some point that screwed this all up.
View 1 Replies View RelatedSuddenly my Win 7 Home Premium x64 will not boot. The system starts, POSTs then loads the DVD driver, then the screen goes black (not blank but "lit up" black if that makes sense). Then nothing. If I use Hiren's boot cd I can boot up using the "boot from HDD" option fine and Windows operates normally. System restore to a previous configuration made no difference to the original problem. I cannot boot into Safe Mode. F8 just offers me boot order options.
- Running the Windows 7 DVD I find: "No operating system is listed on the Repair Windows option."
- Running Startup Repair finds the following error: "the partition table does not have a valid system partition" which it claims to have repaired, but the error remains and Windows will still not boot.
I followed this advice:
Boot 7 dvd to system recovery options command prompt. Type: Diskpart
list vol (find the vol letter e.g C or partition number e.g. 1 for the system partition )
Sel vol C ( or sel vol 1, obviously use the correct letter or number)
act exi
My system partition was easily identified and listed as healthy so I selected it and made it active. The problem still remains exactly the same. My system is self built just over a year ago, to my knowledge has been running fine, without any hardware issues. I'm prepared to do a clean install if that's what it takes but if there is a way to fix the partition problem without that I'd like to explore it first.
I have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
View 1 Replies View RelatedI want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
View 9 Replies View RelatedDid a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
View 1 Replies View Relatedthis is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies View Relatedi had multiple systems (3) on my computer but mainly 1 i use everyday, so i formated the two partitions with the systems i dont need after a reeboot (like i ecpected) i had a bootmbr missing error. So i went and tryed using the repair function of the dvd but that dident work. So i installed a complete new system on one of the new partitions (i left the old one allown), after i installed the new system i booted up and installed easy bcd and added my old partition to my boot manager, but after i boot up I can see the boot menu and select the old system i want to start up from but it brings an error and tells me to enter the dvd and repair the system. I am so lost on this. why istent it just taking the files and booting? what did i do wrong
View 1 Replies View RelatedJust now I lost boot files to boot into Windows 7... I am running triple boot with XP, Vista and Windows 7,.... Now I cannot boot into Windows 7 XP and Visa are OK... I can see and access Windows 7 drive from any of 2 OS but can not boot into it.
View 9 Replies View RelatedMy Windows 7 64 bit machine will not boot. It keeps going into Windows System recovery mode. I have tried that multiple times and rebooted each time but no luck.System specs - Windows 7 64 bit, 16gb ram. Core i7-920 with 12 gb ram. This is an OEM disc that I bought from comp store, all parts and OS are less than three years old. C: drive - windows install a few apps, Drive 1 - games and music,
1) tried looking up this error with instructions. online instructions have had me go into the command prompt to perform edits on the c: windowsSystem32 folder. These do not come up in my prompt on my c: drive - where windows in installed. See program files etc, but no Windows32 folder.
2) already have run the c: chkdsk /r to try and fix the disc. It went through everything and comes back saying there are no problems. Still cannot boot to windows either get BSOD mentioned above or recovery mode.
3) Cannot go to previous restored state (one of the choices ) as it states that I have no restore points although I know that I have established at least 2 in the last 2-3 months
4) Tried inserting the Windows 7 disc and running repair from there but it just takes me to the same Windows system recovery mode which still does not work.
5) I tried hitting F8 during boot to go into safe mode but no good. it only takes me to a screen which gives me the option for boot order.
6) run the memory test from recovery console - no problems.
I have read the BSOD thread but everything there seems to assume that you can already boot into Windows at sometime and download the exe to run. (I cannot get into windows at all)Does anyone have any suggestions? I built this one myself (4th build) and have never in the 10 years of using Windows had a problem which I could not get into at least safe mode.I can go to maybe until this weekend but need to use my computer by Saturday cob.If I have had no luck at that point i will have to reinstall windows (it is on its own harddrive with most all of my applications on separate drives. So that may be a small blessing.I have had no strange occurrences while using the computer which is on pretty much 24/7.Is this what happens when a harddrive crashes? This one is about 2.5 years old and there have been no warning signs that something was amiss (no clicking etc)
I have a problem with my windows 7 home premium x64 system. Whenever i try to run a system file, such as regedit, or any recently downloaded file, i get the message: "Cannot find the file c:path. Make sure the path and file name are correct" (translated from swedish)And when i run system restore (which i have to do true recovery mode) i cannot find any restore points, they are all deleted somehow. I can also not run sfc.Things i have done:
-Scanned for viruses.
-Googled so mutch that my fingers has turned blue.
I have a HP desktop with Windows 7 Home I believe. I have spent the last 3 months or so downloading files from the internet, sadly to say that I just noticed that my anti-virus software had expired. I have around 30 GB of files I would like to keep, but would like to do a system restore back to brand new. I have tried SugarSync to upload those files, and have been watching the upload screen for about 2 weeks now with 800 files still to upload. How can I keep my files and restore my system internally? I'm basically computer illiterate and don't want to spend the money for a program to help or for a flash drive or dvd's.
View 7 Replies View RelatedI got this new laptop it is an hp 64 bit windows 7 premium. When ever you buy a laptop these days you need to back up the system files in case you need to restore the laptop.
View 6 Replies View Relatedclean up system files?
View 6 Replies View RelatedI lost some system 32 files from dropping my computer im not sure how many are lost. How do i restore it. When i tried to restore it with the cd it said missing file.
View 1 Replies View RelatedMy old computer was on its last leg and so I went in to Geek squad so that they could back up most of my files, journal and my resume. Now that I have a new computer w/ Win 7, I tried to retrieve my resume from MS works and was unable to do so. Prompt came up to open tasks and go into History, but my resume is not listed. Can some one please help me retrieve my resume? They used Roxio software and so I have 2 discs
View 9 Replies View RelatedI recently lost some files, so I did a system restore to a date that the files were intact to retrieve them. However, while the programs on the computer are now correctly set back to the system restore date, the files in question are still missing (at least partially). I'm curious is there exists a way to restore not the applications and system settings, but simply to restore old files, or if it's too late at this point. I suspect if I went to a professional they would be able to work some magic to restore the actual files, but it wouldn't be a standard procedure, and I don't have the funds right now to do so.
In more detail: I had XAMPP installed so I could do local testing before putting websites I was working on online. As such, the folder in which I kept all my local data for web development work was within XAMPP's 'htdocs' folder, which is where the local files needed to be stored so that apache and php could utilize them. However, since the install of XAMPP, i'd been having issues getting Apache to run - it worked occasionally, but would usually quit after a second of running each time I started it (that's a whole other issue though). In any case, because I couldn't figure out why Apache wasn't working in my XAMPP install, I decided, 'screw it, I'll give WampServer a try instead, and proceeded to uninstall XAMPP then restart the computer to get a clean slate before installing WAMP. Of course, I foolishly spaced the fact that all my local web development files were stored in the XAMPP files, and they were all deleted during the uninstall. So I proceeded to do a system restore to about 24 hours ago (the most recent system restore point). It seemed fine at first, until I tried to get my old web dev files back: I went to the htdocs folder in my now-restored XAMPP folder, but the old files were not intact! It seems that while XAMPP is back on my computer, all the files that were deleted during the initial uninstall were not restored. Specifically, and I can't for the life of me figure out why this would be, but the only parts that remained were the file structure (all the old folders where there, but not many of the files within them), Javascript files, and favicon image files. Everything else is still missing.
is there a way, within windows, to actually restore all those old files? Or due to the sequence in which the uninstall of XAMPP then the restore went, is it too late?
I was manually deleting a virus on my computer because no antivirus software could detect it and in the process I accidentally deleted a couple of system files, i think one of them was spider.exe, now my programmes wont open properly, only some of them will open and i have to right click and run as administrator for it to actually open, i really don't want to restore my computer, does anyone have any suggestions. I'm running windows 7, starter pack of that makes any difference?
View 7 Replies View Relatedi'm trying to understand what these folders are for, they are on my non system drive, i'm guessing they are left over from a previous windows installation. when I try to remove them it says I have no permission to modify them. How would I go about deleting them?
View 1 Replies View RelatedThe initial Win7 install to now (about 9 mo), search worked fine and I love it, but I may have done something that broke it. Searches appear to only find stuff on C and then only system related stuff. None of my files/folders and nothing on any of my 3 drives. For example, it finds my Desktop folder but no contents. I went into the Indexing tool and enabled all drives and did a re-index with no improvement. I can't find any settings that control where it searches.
View 4 Replies View RelatedI had an old P4 system that the PSU went out on, so while I was at the store getting a new PSU, I picked up a copy of Win7 also. Put the PSU and Win7 in and the next day, the Motherboard died. Went and bought a new i-core motherboard, processor, memory and video card and put it together using two drives. The one Sata drive from the old system is a 1T that has the Win7 from the other system on it along with about 75 movies, 500 pictures and 1500 songs. I used a 250 gig SATA to load the Win7 onto the new system. So now the new system is running off the 250gig and all my files are on the 1T drive along with the old Win7 folder. I want to delet the old Win7 folder but it won't let me giving me a message saying I need permission from a trusted installer to remove these files.
View 2 Replies View RelatedMy daughter has a Gateway laptop running Windows 7 Home Premium 64bit. We have 4gig RAM installed.The other day she tried to create a folder on the desktop. However, she was not able to do that and was also not able to click on any icon on the desktop at all.She restarted the computer and it seemed to fix itself. However, the next day it happened again.Does this sound like a corrupt system file or a virus? We have PC Tools Internet Security on her laptop and it says there are no viruses.Also, not sure if this is related, but the computer takes over 15 minutes to shut down. Actually, I don't know exactly how long it takes because after 15 minutes she gets frustrated and just holds down the power button to force it to shut down.There are no updates available - we have checked and it says there are none.
View 1 Replies View RelatedMy sscreen goes black every time I play a game , can't tell at how much time but happens frequently. I'm attaching the diagnosis of the ""dxdiag"" report. Check it out.
View 9 Replies View RelatedIs there anyway I can delete some files and not have them stay on my system? I plan on deleting at least 10gigs of old Music, and don't want them to stay on my Hard Drive like usual.Also, if I use Revo/PC Decrapifier, does that get rid of any pieces of the program that there is, or should I run CCleaner/Registry Cleaner as well.
View 3 Replies View RelatedWith view hidden/system/suffix the system/boot files that are available at the drive where Windows 7 is installed is DebugTraceAP.log hiberfil.sys (not sure if this is for Windows) and pagefile.sys. The rest of the non-folder Windows System files are scattered throughout my other drives.
AUTOEXEC.BAT, boot.ini, bootmgr, CONFIG.SYS, IO.SYS, MSDOS.SYS, NTDETECT.COM, ntldr are located at drive D. Last time I tested before I formatted yesterday due to forcefully deleting the system files in my other drives, there were 3 drives that cannot be removed even though these drives don't have any programs in them just some of my archives.
Is there a way for Windows 7 to only use the installed Windows drive for all the system files?
I can't transfer any files to this empty folder - Library/Documents. I created a new folder called 'Docs' in Library' to see if that would work and the system won't allow me to place any files there either. It seems like I'm not allowed access, but I'm the owner.
View 4 Replies View RelatedI've got a decent machine with a fresh install of Windows 7 32 bit.* Everything seems to working fine, but I notice that, just like with my previous XP system, transferring files from one storage drive to another (even internal to internal) bogs down the entire system quite a bit. This has always been the case, but I was hoping it would be better under Windows 7.I'm talking about moving files from one logical data storage drive to another, without involving the C: drive and OS (directly, at least). Going from an internal drive to an external drive is even worse. The system doesn't slow to a crawl or lock up but I notice a considerable drop off in all the other functions. Is this typical for everyone? It just seems that with hardware improvements in drives and motherboards, this would get better with time.BTW, we're talking about a Gigabyte EP45-UD3P mb with a Core 2 Quad 2.67ghz processor and 4 gb DDR2 ram. Not blazing by any means but respectable for everyday work.
View 1 Replies View RelatedMy system disk is about 80% filled up and I am looking to move the system files to a new disk for increased efficiency. I believe the way to go is diskcopy, creating a clone of current system disk to a new disk.smI am looking at EaseUS Disk Copy Home Edition 2.3.1 and MiniTool Drive Copy both freeware.
View 4 Replies View Related