System Bogs Down While Transferring Files?
May 21, 2012
I've got a decent machine with a fresh install of Windows 7 32 bit.* Everything seems to working fine, but I notice that, just like with my previous XP system, transferring files from one storage drive to another (even internal to internal) bogs down the entire system quite a bit. This has always been the case, but I was hoping it would be better under Windows 7.I'm talking about moving files from one logical data storage drive to another, without involving the C: drive and OS (directly, at least). Going from an internal drive to an external drive is even worse. The system doesn't slow to a crawl or lock up but I notice a considerable drop off in all the other functions. Is this typical for everyone? It just seems that with hardware improvements in drives and motherboards, this would get better with time.BTW, we're talking about a Gigabyte EP45-UD3P mb with a Core 2 Quad 2.67ghz processor and 4 gb DDR2 ram. Not blazing by any means but respectable for everyday work.
View 1 Replies
ADVERTISEMENT
Apr 3, 2011
I'm a newcomer to the forums, but I've been having a problem that's been plaguing me for a long time. Whenever I am transferring a large number of small files of maybe when I am installing a game, for example, my system starts hiccuping and fulfilling simply tasks such as opening Microsoft Word take a lot longer. The processor usage remains pretty low, and it hardly uses more than 50% of my available memory.I have bought two 1TB Seagate HD's two days ago and mounted them under RAID0, for I was considering the problem was a faulty HD. The performance of the RAID is where it should be according to HT TACH, but today after installing Armed Assault 2 the same problem happened again.My system is overclocked to 3.7GHz, and I've tried running everything under vanilla BIOS configuration and the problem still persisted
View 5 Replies
View Related
Jan 25, 2009
Has anyone run across this? Whenever I install a program via the DVD drive or from a mounted ISO the install is painfully slow. The system them responds super slow. This also happens when transferring files from multiple drives. I understand there will be a lag when the hard drive is in use, but this never happened under the same setup in Vista.
View 2 Replies
View Related
Nov 28, 2011
Finally time to replace my Dell desktop running XP Home with an HP desktop with Windows 7. What is the best way to transfer files, pictures, music, contacts, etc. from XP to Windows 7? My email and contacts are currently in Outlook. I don't know what email program to use on the new computer since I bought the Student and family version of Microsoft and I don't think it includes Outlook.
View 1 Replies
View Related
Dec 7, 2011
I have a new Lenovo laptop with Windows 7. I have an old Dell Inspiron laptop with Windows XP. I realize I need to move my Firefox bookmarks and MS Office Outlook address book to the new computer.
1. How do I do this?
2. Are there any other files or info I should transfer?
I'm trying to avoid losing anything if the old laptop dies (no signs, just old). I store all my program backups, pictures and documents on a portable hard drive and cds.
3. Should I be doing more? I notice my Lenovo automatically backs up every day.
View 5 Replies
View Related
Sep 10, 2011
I cannot transfer files to an SDHC mini card when connected to my Windows 7 computer; no problem on my Windows Vista computer. I've tried changing the drive letter because the drive shows "unallocated", but that didn't work. The drive is showing up in My Computer. I get an error message, "Cannot read from source file". I've selected to give administrator options and everything I know to do to no avail.
View 4 Replies
View Related
Nov 14, 2010
I have a Desktop running Win 7 Home premium and have recently installed Win 7 Professional on my laptop. I want to transfer the desktop and other settings (MS Office) and files from the desktop to the laptop. The desktop has 2 drives, one with Windows and program files and the other with User Data. My laptop has one drive partitioned with a similar setup, Windows and Programs on the C: partition and User Data on the D: partition. When I try to transfer I get the message the transfer cannot take place because there is not enough room and to delete some files to make room. The problem seems to be that the transfer wizzard is trying to transfer everything from the Desktop to the C: drive of the laptop, rather than C: to C: and D: to D:. Is there a way around this ? I have tried to map the drives but it won�t let me do that!
Secondly, if I only try to transfer fewer files, I am told the Desktop is not connected to the domain, but I have not set up a domain and when I try on the desktop, the option is greyed out.
View 8 Replies
View Related
May 11, 2009
i installed windows 7 7100 32bit on my desktop Pc and 7100 64bit on my laptop...
i have D-Link Wireless Router...
Now I have successfully connected laptop from desktop pc via wifi.
I have DSL Internet connection on my Desktop PC, now i can connect to it via Wifi, on my laptop and i am able to use it !
Now the problem, i cannot transfer files from my desktop to PC.
in Other Words I Don't know how to do it so please some one help me guiding step by step with example on how to transfer files!
View 9 Replies
View Related
Jan 10, 2011
I recently built my own PC and need to figure out how to transfer files from my old mac to my new pc.I have an external hard drive, and the mac recognizes it when I plug it in but won't let me transfer any files to it.
View 5 Replies
View Related
Jul 30, 2012
Transferring files to new computer
View 2 Replies
View Related
Dec 24, 2012
I have a friend with a mac laptop that I need to transfer roughly ~110 GB from. I have a laptop that dual boots Windows 7 and Kubuntu 12.10. Does anyone know the quickest and easiest way to directly transfer these files between our computers? Neither of us has a large enough external hard drive.
View 9 Replies
View Related
May 5, 2011
When I do a large file transfer or multiple file transfers my computer gets extremely slow during the process. Slow meaning that to open the web browser it struggles and while typing search terms in google there is lag. That's just one example, other's being opening programs.Last night I reformatted my computer because I thought maybe it had something to do with it. But no luck because after the clean install was complete I transferred about 600gb back on the computer and during this process tried to view the properties xpadder (Right click-> Properties) and the entire system froze. A hard reset and I started the process all over again, tried watching tv using windows media center and it worked but flipping through channels was extremely slow and it is not usually.
View 2 Replies
View Related
Dec 30, 2012
I have an Sony Vaio S Series with i7, 8GB RAM and Crucial M4 256GB SSD. Whenever I transfer an large file via USB3.0 to my External Hard Drive, the speed sometimes lags.Like the transfer speed would be around 100MB/S, but it would stay at that speed for some seconds and the status indicator would not move, just sits thereThen after the few seconds, it would continue transferring at USB3.0 speeds.I have updated the Intel USB 3.0 eXensible Host Driver and still freezes.I also tried my USB 2.0 port and the speed freezes and status bar freezes as well.hen the speed is freezing, I see the External Hard Drive indicator light copying but the status indicator is not moving. My laptop also take an long time to load Chrome when this occurs...Also, something else I noticed.
When I copy an file from External Hard Drive to my SSD, there is no lag/freeze. But the speed is slower. When I copy an file from SSD to External Hard Drive, the speed goes up to around 200MB/Sec, freeze/lag, then continues and sometimes the speeds drops, and then continue, and then lag/freeze, and then drops. Always around the 5-10 second mark, the status bar freezes and finishes it off.I tried copying the same 4.86GB file to the External Hard Drive (WD 500GB My Passport and Hitachi 500GB HDD with Enclosure, both USB3.0) to another laptop with USB3.0 and there is no lag/freeze, but the speed is slower..
View 3 Replies
View Related
Oct 31, 2012
I run an ACER Aspire X3950 with Windows 7 Ultimate 64bit. I purchased a "RAYGO eXtreme Hard Drive enclosure (SATA to USB)" and installed within it a 1 Terabite HDD that was working (and can work) flawlessly in a different PC. The HDD is about 85% empty. For no apparent reason, most of the time when I (try to) transfer large files to the external HDD, the latter stops working. However, I've been able to transfer (blocks of) files of more thann 30 Gb without a hitch.
When the external HDD does stops working, Device Manager shows "Unknown device". When it works, Device Manager shows two instances of "USB Mass Storage Device". If I restart the PC, most of the time the external HDD is ignored and not even the "Unknown device" entry appears. The closest thing to a solution I found at "Problems may occur when you try to transfer files to or from a device that is connected to a USB 2.0 hub", where they state:
Code: Resolution for Windows 7
To resolve this problem in Windows 7, add a EnHcSoftRetry registry entry with a DWORD value of 1 under the following registry subkey:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumPCI<hw id><instance id>Device Parameters
Note To obtain <hw id> and <instance id>, open the Device Manager property page for each EHCI USB host controller, click the Details tab, and then select Device Instance Path in the list. Most systems have only one or two EHCI host controllers, so this should not be too difficult. To no avail, I've tried placing the EnHcSoftRetry registry entry both as part of the "Device Parameters" entry and as a sub of it. I've tried using DWORD and QWORD to no avail, too.
View 2 Replies
View Related
Nov 7, 2010
Currently I am using 80 GB SATA Seagate HDD as my system drive and would like to purchase a bigger drive. In this Seagate HDD I have 2 partitions, C 40 GB and D 40 GB.Suppose I purchase a new drive and make a 200 GB C partition, is there a way to successfully transfer everything including the settings and Windows from the old 40 GB on Seagate to the new 200 GB partition?I'm thinking about Norton Ghost but have never had any experience of using it for this kind of scenario.
View 5 Replies
View Related
Oct 2, 2011
In a nutshell what i am wanting to accomplish is to be able to log onto my desktop PC and access files that are on my laptop. Transferring large files takes a long time when you have to copy it to an external HDD and then back again onto another PC so i am hoping that if i get this working it will solve my problem.I have tried multiple things like Homegroups and setting the sharing permissions on files to allow me to access them but neither of these options work, i even followed the guide for the later attempt that is posted in a thread further down on this forum.When it comes to the homegroup i set up the homegroup on my laptop (by following a guide someone wrote on this forum) but when i go to access the hoemgroup on my desktop it does not say that there is a homegroup already on the network to access, and yes both computers are on the same wireless network.When it comes to the sharing permissions i follow the PDF also found on this forum to the letter but when it comes to going onto my desktop, opening the network screen my laptop is just not there.
View 9 Replies
View Related
Jul 12, 2012
- i disable internet access on my pc and use connectify and create a virtual hotspot,
- then i use my ipad (the device i want to transfer files from my pc to) and connect it to that virtual hotspot
- i use the program Phone Drive on my ipad, it has wifi sharing feature, it gives me the http:// and ftp:// addresses. i know these things, i can either use http:// address in my browser or ftp:// in any ftp clients, then i transfer files easily,
- when i copy files from my ipad, my pc actually downloads the files, not copies the files, likewise when i copy files from my pc to my ipad it actually uploads the files, not copies. and this is why i disable internet access before i create virtual hotspot because i don't want it to use my bandwidth (or data).
- and HERE'S MY QUESTION: does it actually use bandwidth when i upload or download, if it does not, then i wouldn't need to create a virtual hotspot and disable internet, i just need to connect them directly to my real router hotspot and use. and how do i know/how can i check?
the transfer speed is actually very slow, like 2 MB/s, i thought this is normal since when i download files from internet it's about 2 MB/s too, but then i see many people on some websites say their speed is 10MB/s (they say this is slow, i think this is fast), or 80 MB/s, so i wonder why is my speed so low? and this is not a real wifi hotspot, it's virtual, so it should be fast, is there any other software that can make a virtual wifi hotspot that has fast speed? and why are other people's wifi transfer speeds so fast but mine is slow?
View 2 Replies
View Related
May 5, 2011
When I do a large file transfer or multiple file transfers my computer gets extremely slow during the process. Slow meaning that to open the web browser it struggles and while typing search terms in google there is lag. That's just one example, other's being opening programs. Last night I reformatted my computer because I thought maybe it had something to do with it. But no luck because after the clean install was complete I transferred about 600gb back on the computer and during this process tried to view the properties xpadder (Right click-> Properties) and the entire system froze. A hard reset and I started the process all over again, tried watching tv using windows media center and it worked but flipping through channels was extremely slow and it is not usually.
I think my hardware is more than capable:
Windows 7 x64
8gb of Ram
1tb WD Caviar Black
ATI Radeon 4890
Gigabye P55-UD6 rev1.0
Enermax Modu 82+
Corsair H50
Some background info:
I originally had my computer overclocked but after a Bios upgrade I couldn't get the same results so It is currently stock speed. Computer is only a year old. Running temps are around 40-45C. Harddrive temps are normal (40-48C). I have completed a full check disk and monitor the harddrive with CrystalDisk Info (SMART Utility) and it seems 100%.
View 10 Replies
View Related
Nov 2, 2012
Every time I press caps lock, to turn on or turn off, I can't keep typing until some process completes. The icon for capson/capsoff comes onscreen, and while it's there I can't keep typing, until some time passes.
View 1 Replies
View Related
Feb 21, 2012
I recently got a new PC and transfered all my old settings/documents to the new machine. First off, thats an awesome feature I wasnt even aware of! However, Im concerned about one thing; on my old PC, my wife used to have a profile that she used for work and had some confidential financial documents on. She deleted her profile some time ago when she got her own PC, but could it possbily have transfered her old/deleted documents onto my new machine? I only ask because I mainly use my new PC for work/presentations (in public places). While its unlikely, I just wanted to make sure no one would have access to those old documents should they gain access to my new machine.
View 4 Replies
View Related
Dec 26, 2011
Cannot access my email after transferring files from old computer.how to access email from [URL] Is there a free program I can install? If so, how do I access that address?
View 4 Replies
View Related
Mar 27, 2011
I'm having issues with transferring data between hard drives in my system. I have 3 500 GB drives in my system connected via esata. Just a few minutes ago I tried transferring 24.1 GB from one hard drive to another and it took forever I was getting under 10 MB per second. Once I got everything transferred I created a folder in the drive I moved everything to and then moved the same 24.1 GB plus another folder that was 10 GB and everything transferred into the folder instant, so fast I couldn't every look to see how long it was taking cause it was there the minutes I moved the folders to the new folder. Why did it take so long transferring that same data from one hard drive to another one in my system?? I should be getting a whole lot more than 10 MB per second.
View 4 Replies
View Related
Sep 9, 2010
I have a brand new Acer ax3910 with Win 7 home premium 64 bit already installed. My old computer is an XP home machine but I don't want to give up my software that I have installed on it It is all 32 bit the file system is FAT 32 and I want to transfer it to my new computer's harddrive. I have both computers and an external hard drive large enough to hold the data from the old computer. Of course I don't want to transfer the OS!
View 4 Replies
View Related
Mar 16, 2011
how do I fix this??... I tried downloading a patch from here [URL]
but I keep getting error messages when I try to install it
View 1 Replies
View Related
Apr 10, 2012
My computer always crashes and restarts Windows 7 when I try to transfer large files wirelessly to my network external drive. My old penthium running Vista has no problem doing it...
Here is the log...
Signature du probl�me :
Nom d��v�nement de probl�me:BlueScreen
Version du syst�me:6.1.7601.2.1.0.768.3
[Code].....
View 1 Replies
View Related
Apr 21, 2012
System build 11 months ago
Windows 7 Pro x64 Full Retail
AMD Phenom II X6 1090T
ASUS M4A88T-V EVO/USB3 (AM3)
16.0 GB Dual-Channel DDR3 @ 666MHz (9-9-9-24)
AMD Radeon HD 6950
250GB M4-CT256M4SSD2 ATA Device (SATA-SSD) (OS)
1954GB SAMSUNG SAMSUNG HD204UI ATA Device (SATA)
1954GB SAMSUNG SAMSUNG HD204UI ATA Device (SATA)
I get BSOD sometimes when playing Battlefield 3, sometimes I don't get it. I also get BSOD when transferring large files from external hard drives or from my internal network.
View 4 Replies
View Related
Aug 13, 2009
My main HDD is comfigured into two partitions, C: for Windows 7 and D: for data/downloads/etc. Whenever I copying a large file from Partition D: to Partition C: and vise versa, the transfer slows down to a crawl and the HDD activity light on my case stops blinking.
View 9 Replies
View Related
Feb 13, 2011
I've just done a clean install on a blank hard drive of windows 7 ultimate x64. I had this exact version of windows on another hard drive but I did something and now I can't boot into it any more. So I want to transfer all my files and stuff - I can link up and view everything on my old hard drive, it just won't boot - is there any software or any easy way to transfer my program files so that I don't have to reinstall them all? Also, I'm not sure how to transfer all my windows settings - is it just a file somewhere that I copy across? I've had a look at 'windows easy transfer' but it looks like it only works if you can boot into both operating systems - which I can't.
View 8 Replies
View Related
Feb 4, 2013
I'm using Windows 7 Ultimate with a 6-core AMD processor, 16GB RAM, SSD as primary. Whenever I transfer a large file over the network to another system the mouse and other applications will persistently hang for a second here and there as long as the transfer is in progress. I'm sending 8-10GB files over from the secondary 2TB 5400RPM drive and no resources are showing as maxed out so I don't get it. I'm thinking of trying a 3rd party file transfer solution again, but this still shouldn't be happening with the default.
View 5 Replies
View Related
Apr 19, 2012
I have a Toshiba Satellite L655-1EM laptop running windows 7 home premium 64bit.OEM came pre-installed. I've had the laptop about 6 months.It works great but I seem to get the BSOD quite a lot. I noticed it only seems to happens when I'm using either of my external hard drives or SD cards. Usually when I am transferring a batch of large files between drives.
View 2 Replies
View Related
Dec 2, 2010
I've just purchased a Dell XPS that is loaded with Windows 7 x64. My old computer is a Dell Inspiron with Windows Vista. I've been trying to transfer my files from the old computer to the new computer, but it doesn't seem to be working at all.
I began by simply transferring folders (My Documents, My Music, etc) onto a hard drive, and then trying to transfer from the hard drive to the new computer. I had no problem getting the files from the old computer onto the hard drive, but then when I tried to copy them to my new computer, the process would start, and then just freeze up.
I then tried using the Windows Easy Transfer, but with the same results. No problem getting it off my old computer, but wouldn't copy onto my new computer. It would begin, and then the estimated time left went from a few hours, to ten hours, to three days, to seven days, to ten days. I left it overnight, and in the morning it just told me my drive wasn't connected. It was though.
I've tried using a different external hard drive, but that didn't do anything.
View 9 Replies
View Related
