Stated-windows Cannot Load The Device Driver And Wireless
May 15, 2010
i have a pavilliion dv6000t, intel cpu laptop...anyhow...i look at the device manager, under intel pro 100, and 3945 intel wirles...it does not say device is running properly.....i have this stated-windows cannot load the device driver for this hardware. the driver may be corrupted or missing (code 39) there are exclamation points besides everything in the networking adapter in device manager. what might be the problem here...is it the drivers for the 2 devices?
View 5 Replies
ADVERTISEMENT
Mar 23, 2008
I have had recent problems installing external hd's on Vista 64. I have run into problems with USB2.0 as well as eSATA. The drive will appear under the device manager under "disk drives". But it triggers the new harware wizard, which can't load a driver, which leads to an unknown device being listed. Even when the unknown device is listed the drive still appears under "disk drives".
The drive will appear under disk manager, but it is unaccesable. You can remove the partition but can not change the drive letters or format or create a new partition through the wizard. The wizard will go through the motions and then the Drive manager has a message asking to refresh or restart the console which has no effect...............
View 8 Replies
View Related
Mar 23, 2008
I have a new WD external hard drive that I'm trying use with Vista Ultimate, but when I connect the drive I get an error message saying,
"Windows found driver software for your device but encountered an error while attempting to install it. USB Mass Storage Device Access is denied" I found a KB article which seems to be related, but even after acquiring and installing the hotfix I still can't get the drive to install. KB Article: http://support.microsoft.com/kb/937187 How can I fix this? It's very frustrating a bit ridiculous that installing a simple mass storage device fails.
View 7 Replies
View Related
Dec 5, 2009
Attempting a clean install Vista 32 full OS (not an upgrade) on the below rig. Previously loaded XP without trouble. Now the following message.
"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or a USB flash drive, please insert it now. Note: the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."
I have tried loading XP again and Vista with the same message. Attempting to access the CD unsuccessful.
I have tried disconnecting the LG drive and using the Sony, same error message. LG has no drivers on site stated they are embedded in Vista...
View 5 Replies
View Related
Jun 13, 2008
I made the mistake of plugging my Wacom pen tablet in before installing the driver. Vista recognised the device and installed a default driver which does not work. The Driver installation disk will not install untill the default driver is uninstalled. How do i do this?
View 4 Replies
View Related
Dec 26, 2008
Ive had a new PC for Xmas and its running Vista Home Premium 64Bit. Im looking for drivers for my wireless adaptor its a Invetel Wireless USB Adaptor (UR054g) Device Manager/Windows Picks it up as Cohiba 3887 Rev0
The company no longer supports this device, i remember they havent released a version for vista 32bit either, but i managed to get it working on Vista 32bit by using drivers for another wireless adaptor (I cant remember what one) If anyone has heard of this, knows any drivers that will work or has any they think might work please give me a link, ive been randomly trying different drivers all day, the closest i had it one that started to install but then i got an error saying the System Cannot find the specified file Here is a screenshot So if you know any drivers, have any to suggest or know what the above error means please post ASAP
View 7 Replies
View Related
Jun 28, 2009
Following some of your threads and digging more, I have now conquered my problem. The issue was USB wireless interface would not work after waking from S3. I was able to restore functionality by disabling the device and re-enabling (key part of diagnosis). That was a pain, and certainly not something I want to tolerate over time.
This problem is nicely discussed A USB device may no longer work correctly after Windows Vista resumes from sleep or from hibernation I know MS gets blamed for lots of PC issues which sometimes are BIOS, 3rd party drivers, and unresolved PC architecture issues. This work around forces an HCI reset after sleep/hibernation, much like how removing and replacing a notebook to a docking station would do. I expect this will evolve over time with more use of S3. New drivers, hotfixes, maybe BIOS... but for now this brute force workaround works and makes total sense.
View 0 Replies
View Related
Feb 12, 2008
I have an HP dv9208nr laptop which has worked perfectly for me until recently. A few days ago after closing the computer and opening it back up i noticed that the wireless wasn't working. Obviously i checked the switch and the switch was on but the LED was orange indicating that wireless connectivity was turned off. I tried restarting and no luck; after a few other simple fixes didn't work; i went to the device manager and noticed that the wireless card wasn't in the list as it should have been. I tried updating the drivers; nothing. HP techs sent me a link to a service manual and instructed me to reseat the card manually, reset the BIOS, and reinstall the drivers. It didn't work. the next day the computer had found the card as new hardware and installed it. it worked fine for a day; then the same thing happened again.
View 6 Replies
View Related
Feb 23, 2009
keyboard and mouse are microsoft multimedia keyboard and wireless optical mouse 2000.
The screen saver does not work when you use a Microsoft wireless pointing device on a Windows Vista-based computer
View 5 Replies
View Related
Mar 12, 2009
i just want to know when i want to format my primary hard drive (c: volume) to windows vista 32 bit i select format this drive and it takes about 2 second is this possible? because its relly deleted all (i rememmber full format in windows xp that took some time at least 45 minutes)
View 5 Replies
View Related
Mar 23, 2008
I tried to load the drivers for my printer which seem to load ok but then I get the message "usb2.0 mfp (high speed) device found" and I don't know what to do next as windows update carnt find the driver.
View 5 Replies
View Related
Jun 20, 2008
windows found driver software for your device but encountered an rror while attempting to install installiation unsuccessful, what should I do?
View 5 Replies
View Related
Mar 28, 2009
I Just want to know why my screensaver doesn't work using a Microsoft wireless laser mouse, also microsoft wireless keyboard, windows vista.
View 9 Replies
View Related
Dec 1, 2009
I got a new Acer Aspire M3800-U3802A desktop machine and I updated everything in Vista HP SP1 OEM. However, I did not get its IE8 since it was optional and I didn't want it yet. It does not offer me a SP2. Why is that? I read it can be picky on drivers and stuff, but which ones? Do I really have to get every driver and updates from Acer.com? I know I can get the stand alone SP2, but I would like to know why Windows Update is refusing to give me SP2.
View 9 Replies
View Related
Mar 23, 2008
Can not get my HP 7400 scanner to work after upgrading to Vista Ultimate 32 bit. Not the hardware - works fine under XP pro using same hardware configuration. Did a clean install, installed motherboard BIOS updates, scanner BIOS updates, Vista updates and the correct driver from HP. The scanner installed and Device Manager says device is working properly. When I try to scan, scanner initializes, starts to scan then locks up. Then can no longer be seen. ASUS M2N-E motherboard with AMD dual core. Other than that Vista works OK with the rest of my system
View 9 Replies
View Related
Sep 30, 2008
i have installed the correct driver for this belkin bluetooth usb dongle model: F8T012XX1 but in device manager, it has the belkin device and microsoft bluetooth enumerator, which is great. but when u get further down the list. it has a tab named "other devices" and then a subtab with "bluetooth peripheral device" which has an exclemation mark on it. i have searched for driver software using the update service but it cant find no update. i have looked for the name of the manufacturer but found nothing.i then disabled the unknown device, and sent a picture to my mobile phone. which confirmed that it was not the belkin bluetooth device. so i uninstalled the unknown device, restarted the computer. then when i logged in, it said that it had found a new device and wanted me to find the CD that came with it.
View 6 Replies
View Related
Jul 29, 2009
Windows will not Load After A Power company Blip. I had my bios set to load up to the state it was in before the power failed and came home to find I had a power outage and the screen showed one of the windows start up loading green dash scroll bars stuck in the middle. Safe mode no good. Boot to Vista disc and repairs cannot be made. Pulled ram sticks to check for bad ones and no go.
View 5 Replies
View Related
Nov 23, 2009
On my laptop I am using Vista Home Premium 64 and when I open the Window Update application from control panel or start the window opens blank white with This page cannot load.
View 5 Replies
View Related
Mar 23, 2008
Everytime i enter to my user, the explorer.ese doesn't load but the document file loads. To enter to the user i use the task bar (i ctrl alt delet) then i nw task the explorer. This started happing after I was virused. i was able of removing the virus but i can't fix my computer. I think maybe on of the seeting was deleted from the system 32. I tried a lot of stuff but i counldn't fix th problem. I even tried creating a bat file that starts the explorer everytime but i failled, cause it will start when the account starts not before.
View 8 Replies
View Related
Mar 8, 2010
windowssystem32driversmsisadrv.sys. Is the file that is corrupt. I have read other fixes for this problem, MY problem is that I can't boot windows, it just keeps going to that black menu asking which way I want to boot.
View 5 Replies
View Related
Jan 15, 2010
I've googled this probelm and seen many people with same/similar. i've been trying for days to fix it with no success. i'll provide as much info as i can after running windows update my event viewer won't load with this error message - mmc has detected an error in a snap in and will unload it and 2 options:
1) report error to microsoft and shut down mmc
2)unload snap in and continue running............................
View 8 Replies
View Related
Sep 16, 2009
I have just upgrade to vista from xp, and now none of my games work, i used to have directx 9.c (i think) now i have 10, which i think is good. i had windows service pack 2 now i hve windows service pack 1 and i no longer have directx. when i try to play a game (from steam) it doesn't load were as it did before, and when i load world of goo it says i am missing direct3D, but i have no idea how to fix this.
View 7 Replies
View Related
Dec 20, 2007
I really like the windows Sidebar in Vista Premium, but something has happened and I can't see or get it to load right now. Any guidance on how to recover from this issue
View 9 Replies
View Related
Oct 4, 2009
Vista Home Basic SP2. When I try to run Windows update all I get is a blank page that says "The page failed to load". I've looked all around and have found a lot of people with the same or a similar problem but no firm solutions. I haven't used it in maybe a week and it's worked fine up till now. There have been no real changes since I used it last. Does anyone have a clue?
View 4 Replies
View Related
Mar 23, 2008
Again. Last time this happened, everyone blamed McAfee, so I killed McAfee and installed AVG Free which is good because it is free. But now I have exactly the same symptoms:
a) Won't download load messages from the server, tries, but eventually times out
b) Happens with Windows Mail, Windows Live Mail and Outlook 2007
I've now uninstalled AVGFree re-booted and the mail client(s) still stick at "downloading measage 1 of 65" then timeout after 180 seconds. here do I look next? Webmail is fine.XP and McAfee was rock solid problem free for years - Windows Mail performance is shocking even when working properly? My son bought a new Dell laptop last month with Vista , he has ripped out Vista, installed XPSP2 (he used MY spare licence!) and he works grief free. I've been using Vista for 6 months now - is time to quit and return to XP peace and stability?Oops I'm using an Acer 5630 laptop with 2GB of RAM Vista Home Premium, Intel Core Duo 1.66G CPU. At idle Vista is grabbing just less than1GB of RAM (I've only the standard gadgets running + IM, A/V is uninstalled while I try to get eMail working again. Is it me, but isn't an O/S that needs 2GB to run a basic suite of MS office applications reasonably well, a bit out of hand?
View 6 Replies
View Related
Apr 19, 2009
I have the Home Premium edition and recently I received the following error:
File: WindowsSystem32tkrnlpa.exe
Status: 0xc0000001
Info: Windows Failed To Load Because The Kernel Is Missing, Or Corrupt
It tells me to insert my installation disc and restart your computer however when I do that I go right back to the previous screen which I just described. I already changed the boot order to boot from the DVD drive first however it continues to skip this screen and keeps looping to the same screen. Does anyone know another way to load my disc so I can continue with the repair?.
View 7 Replies
View Related
Dec 29, 2009
i decided to install Medieval 2 Total War yesterday after months of not playing it, it installed fine and everything but when i went to click on the shortcut on the desktop it came up with the following message: Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item So, i'm on the admin account and i've tried re installing but its the same message.
I tried to install CoD4 just now but when i put the disk in and clicked install nothing happened, just like when i try and launch medieval 2 from the disk (i only get the message when i use the shortcut). I also get the same message when i try and install the software for my webcam, i go to my computer and click the disk drive but the same message comes up! I can launch games i've already installed, just not games i actually want to play! Maybe something i've done is blocking it?
View 6 Replies
View Related
Jun 1, 2009
I know this is a repetitive topic, but I can not seem to figure this one out. It is a HP Laptop DV9815nr. I do not know much about it as it is not mine, but the problem is the audio was cutting out and now there is nothing. The computer is not recognizing any type of audio device installed. Even in Device Manager, there is no option for Sound, game and controllers. I have tried downloading the driver and installing, but no luck there.
View 9 Replies
View Related
May 1, 2009
I'm running Home Premium 64 on a Sony Vaio Laptop (CS170F). I'm having a curious problem: Yesterday I plugged into the machine the dongle of my wireless logitech mouse, and for some reason the machine said "Your unknown device is ready to use" (my OS is in spanish, the messages may not be accurately translated). Since then, an annoying message pops every few seconds warning about an "unrecognized USB device", that "didn't work as expected". The best part is this, if I click on the tray icon, sometimes the informative dialog window is emply, an other times shows all the USB ports in the system plus one extra with a "unknown UBS device", even without any device plugged into the system. I've tryed removing the unknown device from the device manager, but it shows up again.
View 9 Replies
View Related
Feb 6, 2009
I have a new system with the new Core i7 920 CPU (don't know if this matters :p) and with 6 GB DDR3 RAM (1333Mhz 6x1BG) running Vista Business SP1 x64. I intend to disable the pagefile completely and to use a dedicated USB Flash Drive for ReadyBoost.
- What size should this USB Flash Drive have? -I read somewhere that it should be a 2.5:1 ratio (in my case 15GB then) for high-end systems. Is that right? - Do I have to configure the device on every Windows Boot again, so ReadyBoost is going to use it?
View 9 Replies
View Related
Mar 23, 2008
Vista recognizes my device and I can browse the contents of my device. But it won't sync - When I try to sync it says "There is a problem with your connections. Please disconnect and reconnect your device and try again". I have done that many times in addition to reinstalling the Device Center and rebooting. my ipaq is "ancient" by today's standards - it's OS is Windows CE 4.2 but there is a sticker on it that says Pocket PC 2003 Prem. w/ Outlook 2002 and a serial .
View 6 Replies
View Related
