I've googled this probelm and seen many people with same/similar. i've been trying for days to fix it with no success. i'll provide as much info as i can after running windows update my event viewer won't load with this error message - mmc has detected an error in a snap in and will unload it and 2 options:
1) report error to microsoft and shut down mmc
2)unload snap in and continue running............................
So I'm still chasing down why explorer keeps crashing, it's quite annoying. But I guess in doing so I messed with some setting (or maybe I didn't and this happened) and now my event viewer wont run, I even tried running it through cmd with the following commands: eventvwr.msc /s and just eventvwr.msc
I just tried to run event viewer to chase down my explorer crash, then that wont even run, I have no idea what the heck is going on... There's no "cause" except explorer usually crashes when I right click, or when I'm in my desktop folder. Those are the two main things. As far as the eventviewer, I'm clueless. If need be, I can do system restore, but more than likely that's an extreme measure for such a small issue. Its more an annoyance than anything else, it doesnt really bother me lol. Could it be AVG's context menu?
All I know is that this is really getting annoying, but anyway, if you guys have any suggestions that would be great. Do I need to post any screenshots of anything??? I can post them if needed. BTW I'm running Vista x64 SP2 on a HP dv4 lappy, the only taskbar items running are AVG, my pointer, and sound...
near the bottem i started and i have up 400 of the same errors. here is one going back to the start of the year. can anyone understand any of this? and also new critical errors just popes up saying something about my ipod.....its not plugged in
Log Name: Application
Source: Application Error
Date: 19/01/2009 9:32:34 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Harley
Description:
Faulting application powercfg.exe, version 6.0.6000.16386, time stamp 0x4549af7e, faulting module kernel32.dll, version 6.0.6001.18000, time stamp 0x4791a7a6, exception code 0xc0000142, fault offset 0x00009cac, process id 0x3b5a8, application start time 0x01c979bca88c8620.
I explored my Event Viewer for the first time and noticed 1,000's of errors on it.
View 9 Replies View RelatedI already followed closely that tutorial Brink made, to boot on safe mode disable
WinMGMT, etc and it didn't work. I need Event Viewer to work so that Diskeeper works.
The following error i receive when trying to start the service by Services.MSC
Windows could not start the the Windows Event Log service on local Computer. Error 4201: The instance name passed was not recognized as valid by a WMI Data Provider. (The service is set to Automatic, tho)
I've been struggling with this for a couple of days now without any success, I noticed the the event viewer would not start, it reported that "Event Service is unavailable. Verify that the service is running" Well, the service was not running and my attempts to start Windows Event log result in an "Error 5: Access is denied"
So to Google I go. I tried several things that I found there, taking ownership of files, resetting the whole system to default permissions by using a Microsoft
utility. That reset everything except one folder that it reported as an error. That was the EtRTeventLog folder, this seems to locked out completely. I renamed the folder using Unlocker and Windows recreated a new folder but I still have the same problem.
I have a sound trigger for the 'Open program' event in Vista Basic sp2 x32 When my computer is idle and I "here" a program open the only thing I have to go by is the time it occurred. If I want to go to Event Viewer in Administrative Tools and see what this event was that triggered the event sound I'm overwhelmed with a bunch of categories and sub-categories. In order to find what opened at the specific time I need to check each category and sub-category. That is a real pain in the ass. I find no search capabilities in Event Viewer unless I've missed it. Is there some way of making a hunt for a specific time easier in Event Viewer? Or, is there some 3rd party software with the capability to sort all events by data and time??
View 9 Replies View RelatedI there a way to purge events in Event Viewer?
View 4 Replies View RelatedSometimes, when I search for items in the start menu, it gets iffy about using exact names. For example, if I type 'Event' (for Event Viewer), I get nothing. But, when I remove the 't', the Event Viewer shortcut comes up. The same thing happens when I search for the Task Scheduler (using 'Task' and removing the 'k')
View 6 Replies View Relatedhere's the event: After uneventful computing for several hours this AM - I began to play Vista Spider Solitaire for some relaxation & the entire game/cursor - everything froze as I was about to win. Typical! Please note the time discrepancy below from the event log - indicating the correct date/time (7/21) from the log as opposed to the 'description' that indicates the wrong time and date from the previous day (7/20).
View 8 Replies View RelatedI was viewing the security logs in event viewer today (exciting I know!) when I noticed some audit failures. I like things running smoothly so this irked me a little. I have a number relating to tcp/ip: Code integrity determined that the image hash of a file is not valid. The file could be corrupt due to unauthorized modification or the invalid hash could indicate a potential disk device error.
File Name:DeviceHarddiskVolume1WindowsSystem32driversaswSP.sys Code integrity determined that the image hash of a file is not valid. The file could be corrupt due to unauthorized modification or the invalid hash could indicate a potential disk device error.......
when going to the windows update window,i get a white blank page and it says "the page failed to load"i did restart, same issue.
what is it all about?
and another thing, i don't have a Floppy drive in my computer however a Floppy A: drive is present in "Computer" how can i remove it from the list?
My 'unexpected shutdowns' are random and occur -on average- once every session. They vary but usually go by two main scenarios: (1) Vista desktop and mouse cursor freezes - control/alt/delete and keyboard too - the only alternative is to push the PC restart button - or (2) the monitor goes black and Vista reboots on its own. What's usually happening when these scenarios occur? Well, I ought to keep a log ready to record these events. I'll soon have to try but as a student in a much earlier life - I took such bad lecture notes I could not read them after two class lectures. Here's what I can recall:1. I think most shutdowns have happened when either beginning to view a video or going to a new web page that pops up a streaming advertisement.
2. I recall one when I opened Windows Mail - but cannot say if I had clicked on anything yet or if mail was downloading at the time. So - it may not be Windows Mail but just the action of opening a new window? My Internet research indicates these 'unexpected shutdowns' have been frustrating Vista & earlier MS OS users for years. Rather surprisingly, I found no promising suggestions for troubleshooting or remedies - to date. For years the OS of my choice was W2K. If only Vista had W2K's reliability. I rarely - if ever- experienced such ongoing, unexpained W2K events.Perhaps I've missed some new info that addresses this issue - so that's the primary reason for this posting. Anything? I should add that upon rebooting after an unexpected shutdown - Vista asks if Safe Mode is desired during rebooting. I never benefited by going to Safe Mode - except that on the many occasions that I bypassed Safe Mode & choose normal rebooting - I would experience a variety of other issues soon afterwards. So - Safe Mode is probably the best way to go if one's patience permits - even if it avails few if any hints as to the specific shutdown
On my laptop I am using Vista Home Premium 64 and when I open the Window Update application from control panel or start the window opens blank white with This page cannot load.
View 5 Replies View Relatedfrom the first day I have seen plenty of errors in Event Viewer Acer Support even sent me System and Recovery Disc,s. I did a Recovery to Factory Default and there are 24 errors Errors in Event Viewer right after the Recovery was done, BEFORE I connect to the Internet for Updates. The only options this disc,s give me is Recovery to Factory default or recovery from back up, I don't have besides what good is it to make a backup when the first install is full of errors and I don't get to chose which applications or program s to install. In my older Computer, Vista home basic I get to Install Windows with no errors and get to chose which application to Install.
View 4 Replies View RelatedVista Home Basic SP2. When I try to run Windows update all I get is a blank page that says "The page failed to load". I've looked all around and have found a lot of people with the same or a similar problem but no firm solutions. I haven't used it in maybe a week and it's worked fine up till now. There have been no real changes since I used it last. Does anyone have a clue?
View 4 Replies View RelatedBoth XP/Vista Concern: XPS Viewer EP (set as default, on opening XPS files) I can mazimise on open the shortcut XPS Viewer EP, however anytime I click on a XPS file, it opens in a normal windows. Moreover, Windows XP/Vista remember the last window size, XPS Viewer does not. Need opening XPS files in the XPS Viewer EP Maximized on Open (file option, registry?),
View 6 Replies View RelatedAfter Recent Vista Update my batterie doesn't load and it indicates 0%.
View 5 Replies View RelatedI have been using Vista Ultimate x64 for the last 5 months and have to say it's been a massive learing curve due to its fragility - 4 full rebuilds in the last 4 months - and not much fun when using SATA RAID. Anyway, got up yesterday morning, turned on the computer and it had managed to corrupt itself yet again: Windows Defender, Windows Picture Viewer and a host of desktop icons refused to find their pathways home and so decided against a full rebuild and started the repair option with a boot to the DVD. I set this off running and went to work at 12:30pm...
I came back 5 hours later and still had the dialog box " Finalising Registry" running on my screen! Well, a quick restart and i tried the upgrade option once back in Vista from the DVD. This then took and unbelievable 7 hours to complete and was finally ready - after updates - at 01:20am this morning, but a full clean install would have taken about 1-2 hours to finish, so i'll be doing that in future!.........
I have the 32bit Vista Home Premium version. I ran a performance related diagnostic scan and received the below mentioned error:
Description
The results of running the Windows Memory Diagnostics Tool were submitted to Microsoft for analysis and product improvement
Problem signature
Problem Event Name: MemDiagV1
Range of memory size: 3072
Launch type: Manual
Schedule type: Immediate
Completion type: Aborted
Test type: Custom
Failed tests: 10
Range of number of bad pages: 5
Test duration in seconds: 480
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Can anyone tell me what the default Vista picture viewer is and where the program folder is so i can make it the default picture viewer again?
I think it may be something like Windows Picture Viewer lol, but i need to find the program folder.
jpg pictures have a yellow tint in the default viewer in Windows Vista Ultimate x64. Small previews in Windows Explorer do not have that tint.
View 5 Replies View RelatedThat is the message I get from the icon in my Vista tray. When I try to manually check for Windows Updates I get the message that I need to "first install an update for Windows Update". When I try to install that update for Windows Update, I get error code 80070643. There is a lot written about Windows Update error 80070643 having specifically to do with restarting the Office Source Engine for Microsoft Office 2003. HOWEVER, I do not have Microsoft Office 2003 installed on my system and this is not my issue! I am quite fearful at this point that I am vulnerable to all sorts of attacks considering that I haven't updated Vista for about 6 months now. This is not good.
View 6 Replies View RelatedMicrosoft Update was first released a few years ago for Windows XP and Server 2003 as a great way to update all of your Microsoft software installed on your PC. Not only would it update Windows, but it would also update Microsoft Office. Are you a Microsoft Outlook user? If so, Microsoft Update would even download updated junk mail signatures when they are released.
In Windows Vista the new Windows Update application is no longer web-based. Microsoft has built-in the old Microsoft Update functionality into the new interface but you need to turn it on before you can use it. Follow these steps to turn on updates for other Microsoft applications: ...
I am updating my computer and I thought it was finish but my computer restarts and I encountered the death blue screen. I can't switch into safe mode, safe mode with networking, safe mode with Command Prompt and Last Known good configuration. I don't know how to solve this problem because I can't get into any of the modes and even I inserted the installation disc I can't still see any repair computer or what. It will just turn to blank screen with space at the upper left after if i will insert the installation disc.
View 7 Replies View RelatedI understand that Vista SP2 RC update has to be uninstalled before installing SP2 RTM update(when bcomes available). Does 5the Windows Update automatically uninstall SP2 RC update or does it has to be done manually?
View 4 Replies View RelatedWindows will not Load After A Power company Blip. I had my bios set to load up to the state it was in before the power failed and came home to find I had a power outage and the screen showed one of the windows start up loading green dash scroll bars stuck in the middle. Safe mode no good. Boot to Vista disc and repairs cannot be made. Pulled ram sticks to check for bad ones and no go.
View 5 Replies View RelatedEverytime i enter to my user, the explorer.ese doesn't load but the document file loads. To enter to the user i use the task bar (i ctrl alt delet) then i nw task the explorer. This started happing after I was virused. i was able of removing the virus but i can't fix my computer. I think maybe on of the seeting was deleted from the system 32. I tried a lot of stuff but i counldn't fix th problem. I even tried creating a bat file that starts the explorer everytime but i failled, cause it will start when the account starts not before.
View 8 Replies View Relatedwindowssystem32driversmsisadrv.sys. Is the file that is corrupt. I have read other fixes for this problem, MY problem is that I can't boot windows, it just keeps going to that black menu asking which way I want to boot.
View 5 Replies View RelatedI have just upgrade to vista from xp, and now none of my games work, i used to have directx 9.c (i think) now i have 10, which i think is good. i had windows service pack 2 now i hve windows service pack 1 and i no longer have directx. when i try to play a game (from steam) it doesn't load were as it did before, and when i load world of goo it says i am missing direct3D, but i have no idea how to fix this.
View 7 Replies View RelatedI really like the windows Sidebar in Vista Premium, but something has happened and I can't see or get it to load right now. Any guidance on how to recover from this issue
View 9 Replies View Related
