Vista Home Basic SP2. When I try to run Windows update all I get is a blank page that says "The page failed to load". I've looked all around and have found a lot of people with the same or a similar problem but no firm solutions. I haven't used it in maybe a week and it's worked fine up till now. There have been no real changes since I used it last. Does anyone have a clue?
View 4 Replies
when going to the windows update window,i get a white blank page and it says "the page failed to load"i did restart, same issue.
what is it all about?
and another thing, i don't have a Floppy drive in my computer however a Floppy A: drive is present in "Computer" how can i remove it from the list?
On my laptop I am using Vista Home Premium 64 and when I open the Window Update application from control panel or start the window opens blank white with This page cannot load.
View 5 Replies View RelatedSeveral days ago there was a large number of updates available to download. I allowed the system to update all of them. Three, KB974234, KB972581 and KB973709 it was shown on the update history page as failing to download. Reading as to a possible solution, I tried to load them manually, saving those files to my desktop, right clicking on each, to run as an administrator. After each loaded I got a message telling me they were already installed on my system. My question is why does the "failure" notice remain on my history page and how can I delete those three file entries?
View 4 Replies View RelatedWhen I try to go to the windows update page, it always says "page failed to load." I want to disable the updates because there is a particular one that is installing and messing w/ my mouse!
View 4 Replies View Relatedwhen i click start button and right click into computer for properties., then. i was shcoked because nothing appears. and it displays "The page failed to load".
View 4 Replies View Relatedwindowssystem32driversmsisadrv.sys. Is the file that is corrupt. I have read other fixes for this problem, MY problem is that I can't boot windows, it just keeps going to that black menu asking which way I want to boot.
View 5 Replies View RelatedI have installed Microsoft Office 2007 SP2 from windows update...but i have a question....How can i delete this ''failed message'..not updates..only 'fail message'' from update history..look at this
View 4 Replies View RelatedI have the Home Premium edition and recently I received the following error:
File: WindowsSystem32tkrnlpa.exe
Status: 0xc0000001
Info: Windows Failed To Load Because The Kernel Is Missing, Or Corrupt
It tells me to insert my installation disc and restart your computer however when I do that I go right back to the previous screen which I just described. I already changed the boot order to boot from the DVD drive first however it continues to skip this screen and keeps looping to the same screen. Does anyone know another way to load my disc so I can continue with the repair?.
I've googled this probelm and seen many people with same/similar. i've been trying for days to fix it with no success. i'll provide as much info as i can after running windows update my event viewer won't load with this error message - mmc has detected an error in a snap in and will unload it and 2 options:
1) report error to microsoft and shut down mmc
2)unload snap in and continue running............................
my windows vista home will not load to the login page. it all started when my computer would not shut down. as it wouldnt i pressed the off button left it for a couple of mins and turned it back on again. it came up saying that there was a problem and i selected to have it automatically fix the problem. it said it could take a few times for it to work. on the second try it said it could not fix the problem and gave option send message to windows.....
View 4 Replies View RelatedI have Vista x64 with 8GB DDR 2 ram, 2x8800GTX cards, 4 hard drives (2x500gb, 1x150gb and 1 raptor 32gb OS). I back up daily, and yesterday encountered a problem requiring a restore. Since System Restore is useless as it didnt save my "create a restore point" I decided to go ahead with my daily Ghost backup (v12.0 used). Hell broke loose. Ghost's always worked fine under XP but Im writing this article for any suggestions on X64 (if its even the problem). You see, when booting from the Ghost CD, what usually happens are one of 2 things:
1) The Symantec page wont even load, the PC will give a BSOD error message until I remove all but 2GB RAM, then Symantec loads etc
2) When RAM removed, Symantec loads, finds the restore point, restores the drive. Then with around 20 seconds to go I get a BSOD (same one as before). Try booting the PC and for a split second you get the BSOD and it restarts.
If you try loading the CD again, you get the BSOD. The only way to get around the BSOD (and to start the whole process again) is to PHYSICALLY remove the hard drive you reinstalled on, format it with a different computer, plug it back in and start over. This was mental! I restored onto a (newly purchased) Raptor drive. No idea what the problem is. Does anyone recommend any new software to backup a whole PC (quickly) and possibly retore itself within Windows, or ways around the problems above?
I have windows vista home premium...Security Update for Microsoft. NET Framework, Version 1.1 Service Pack (KB929729)will download, but not install....Rec'ved error codes 80246005 and 643. It downloads over and over for months.....any connection to AOL or Trend Pc-Cillin?...I'm technically challenged, so please reply in step by step solution, if you have one.
View 9 Replies View Relatedmy os is vista home premium. my isp is verizon and i connect thru an actiontech wireless modem/router. the majority of sites i try to visit with any browser time out. no error message. just a blank page and a swirling load icon that animates indefinitely. i have no problem pinging any address on dos prompt though and most non-browser progs that use the net function perfectly; curiously, i can't sign onto msn messenger but i can sign on to aim and yahoo messenger.
some sites i have no trouble accessing: google, cnn, Internet, ytmnd (homepage only), yahoo (homepage only), and fortunately, this forum. there seems to be no rhyme nor reason why a select few pages are favored.......
when i turn on my computer, an error message comes saying "Windows failed to load because a file is missing or corrupt File: Netio.sys Status: 0xc0000221" This started when i was clearing my computer of useless programs, and after i deleted Realtime player or Quicktime player, (can't remember which) an error message jumped from the taskbar saying something about Network device driver. After that every time i start the computer, the "Windows failed to load" message pops up. The first half a year, it was solved by pressing enter, to "Choose an operating system to start: Windows Vista" and then to "Windows error recovery (start windows normally, safe mode etc)" and back to "Windows failed to start", repeating it 3-20 times. Then i had a familiar "Unexpected shutdown" during a game, and now, the "Enter spamming technique" doesn't work anymore. All i can access at the moment is Windows memory diagnostic tool, and Bios setup utility. Is there any way to fix this through the setup utility or some other manner?
View 5 Replies View RelatedMy Dell Inspiron 1520 laptop with Windows Vista Home Premium has failed to load the subject update on 20 different occasions since 13Nov09. The "Error Details" is Code 80073712, which is nothing more than a general error code with no specific fixes recommended.
View 7 Replies View RelatedAfter an automatic update from Windows failed to finish and computer shut down... I did a manual update but now the Photo Gallery says my picture files are corrupt. AND my system restore point ONLY shows today... no previous dates to restore to.
View 4 Replies View RelatedA few days ago, Windows Update Automatic updates installed an update on my computer called:
Windows Search 4.0 for Windows Vista (KB940157)
When I restarted my computer after this update I tried to log on and got this message:
The user profile service has failed the logon. User profile cannot be loaded.
I fixed this by booting into the F8 restore options on my Dell Laptop and used system restore to repair the problem
Today Windows Update Installed that same update again and the same problem arose which I again fixed with system restore.
Does anyone have any thoughts on this, like why should this update be causing my User Profile not to load?
Windows Vista Home Premium 32bit
I had no problems yesterday or ever before. Apparently there was an update last night, and since then my desktop won't start up. It gives me the error saying windowssystem32driversfltmgr.sys will not load. I did a system restore to the system checkpoint before that update last night - to no avail though. I've done the automatic startup checker twice using the vista installation disk, it says there aren't any problems. is there anyway to just replace this fltmgr.sys from another vista machine? won't boot to safe mode, same error. last known good configuration doesn't work.
View 4 Replies View RelatedBoot Manager Failed to load - ntoskrnl.exe. brand new to the forums but have been here for the past two days trying everything I can find to try and get my Vista Ultimate machine working again. I shut the computer off the other night before work, came home in the morning and rebooted... and upon loading got a black screen "Windows Boot Manager" coming up asking/telling me to "Repair" the computer. File: Windowssystem32 toskrnl.exe Status: 0xc000098. Info: Windows failed to load because the kernal is missing, or corrupt
I installed my vista disc and went through the repair... nada. I then tried a restore... nada... and now am at a loss. Is there a way to copy the file via the Command Prompt to the Vista drive from the dvd? Is it that simple (ha... I know... it never is)?
I play a PBE game called VGAPlanets-4 (VGAP4) and an excellent programmer has been making updates, changes, fixes etc... to the original code which was compiled with VB5 I belive. The new code is being written with VB6. The problem is that in order to take benifit of all the new whistles and bells of the new code I need to put a version of "mci32.ocx" into the Windows/System32 directory. I do so and get an error:
"Run-time error '372': Failed to load control 'MMControl' from mci32.ocs. Your version of mci32.ocx may be outdated. Make sure you are using the version of the control that was provieded with your application." I've tried to use regsvr32 to register the ocx but no luck. I've tried multiple versions of the file, no luck. It worked under XP SP3 after using regsvr32.............
I built a new system, installing Vista Business 64bit to take full advantage of DX10 and large amounts of memory. Not having many games lying around, I decided to download steam and install Half Life 2. If you are reading this, and using a 64bit edition of windows, then my guess is you are having problems with Half Life 2. I encountered two problems, and after a few hours was able to solve both of them.
GAME HANGS ON INITIAL LOAD (BLURRY IMAGE SCREEN)
"64-bit" message was at top of screen game never loaded Potential cause: It seems that while steam intended HL2 to have a 64bit edition, with an update along the line (maybe with the release of Left4Dead according to others) the support was broken and the game doesn't load.
Fix:Unfortunately, the fix removes the 64bit potential. In steam, right click half life 2, and select. From the dialogue box, click Enter "-32bit" and select This got HL2 to load, where upon playing I encountered problem number 2.GAMEPLAY CAUSES FULL SYSTEM HANG- Symptoms: After playing for less than 5 minutes, the game would crash and the three fingered salute (ctrl+alt+del) couldn't get me out of it......................
After Recent Vista Update my batterie doesn't load and it indicates 0%.
View 5 Replies View RelatedI am trying to update the bios on my computer but I am running into problems when booting from a usb flash drive. I get the error: "Windows failed to start. A recent hardware or software change might be the cause. The boot selection failed because a required device is inaccessible."
I have been going about this process following instructions found here: Solution for Updating the BIOS on Windows Vista x64 Machines (VistaJuice)
In my 64-bit installation, the print spooler server suddenly stopped running (and will not restart). I've tried cleaning out registry keys (HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPrint), deleting the files out of Windows (C:WindowsSystem32spool) to no avail. The system log contains many of these:Error Service Control Manager Eventlog Provider7034None The application log contains these:WarningSpoolerSpoolss1035NoneThe print spooler failed to load print provider localspl.dll. This can occur because of system instability or a lack of system resources.ErrorSpoolerSpoolss1027None The system failed to initialize the local print provider: Error 0. This can occur because of system instability or a lack of system resources.
View 4 Replies View RelatedI've been trying to process the following updates to Vista and each time I try to do so, the updates failed: "Update for Windows Vista (KB938371)" Failed 4/10/08 "Cumulative Security Update for Internet Explorer 7 in Windows Vista (KB47864)" Failed 4/9/08.
View 4 Replies View RelatedI'm running Vista Service Pack 1 on a Fujitsu Tablet PC (T4220). For several days, I've been unable to install the Vista Security Update KB971657. The update downloads, my machine reboots, and then an error message comes up "Updates not configured correctly." The machine shuts down, reboots, and then gives the message "reverting changes." When I go to Windows Update in the Control Panel, I see that the update failed, but no error code appears. So far I have:
1. Disabled my antivirus program (Kaspersky), and tried to download and install again, but no luck.
2. Done a clean boot by changing the settings in the System Configuration Utility, rebooted, and tried to download and install again, with no luck. In reading through this section of the forum, I see at least one case in which an update wouldn’t install because the user has Service Pack 1 but should have SP2. Should I try downloading SP2 and see if this resolves the problem? Though I’m curious why Microsoft hasn’t installed SP2 automatically on this machine since my settings are for automatic installation of updates.
Something seems to be amiss in my Vista install and I am having problem install some things. Whilst working through some KB articles I was instructed to "Regsvr32 wbemupgd.dll". The result is a red X and the following message: The module "wbemupgd.dll" failed to load. Make sure the binary is stored at the specified path or debug to check for problems with the binary. So I searched my hard drive and it seems that "wbemupgd.dll" has gone missing. Any idea where I could get this .dll and why it might have gone missing?
View 4 Replies View RelatedI have attempted many times and failed to install a security update for Microsoft.NetFramework,version 1.1 service pack 1 (KB29729). I receive a failed to install with a Code 66A. I have tried to find an explanation for the code to no avail. This is listed as an important update for vista but I am stumped as to why it won't install.
View 7 Replies View Relatedsp2 update started this way .so far ive deleted pending.xml file/installed new updater/run chkdsk/downloaded and installed sp2 standalone. nothing seems to work. i have an hp dv9000 laptop with sp1 installed and its set for micro auto updates. ive been trying for about 4 days now to get it to work. i also have avast anti virus installed.now i get update failed without the error code but tells me to the system readiness tool wich i did that too.
View 8 Replies View RelatedI have a factory install version of trend microcillin, if I unistall it how do I get it back if that is not the problem with the opening of attachements. As others have said I have been using it for over a year and had no problems until I updated vista lately
View 9 Replies View Related
