Update Failed: System Readiness Tool?
Nov 15, 2009
sp2 update started this way .so far ive deleted pending.xml file/installed new updater/run chkdsk/downloaded and installed sp2 standalone. nothing seems to work. i have an hp dv9000 laptop with sp1 installed and its set for micro auto updates. ive been trying for about 4 days now to get it to work. i also have avast anti virus installed.now i get update failed without the error code but tells me to the system readiness tool wich i did that too.
View 8 Replies
ADVERTISEMENT
May 29, 2009
I thought this might help people who are having problems updating Vista. This article describes the System Update Readiness Tool for Windows Vista-based computers and for Windows Server 2008-based computers. Microsoft released the System Update Readiness Tool to resolve certain conditions that could cause installing updates and other software not to work. You do not have to manually run this tool. This tool is offered automatically through Windows Update to computers that have a condition that the tool could resolve.
After you download the System Update Readiness Tool, it runs a onetime scan for inconsistencies that might prevent future servicing operations. This scan typically takes less than 15 minutes to run. However, the tool might take significantly longer on some computers. The Windows Update progress bar is not updated during the scan, and progress seems to stop at 60% complete for some time. This behavior is expected. The scan is still running and you should not cancel the update.
View 9 Replies
View Related
Nov 2, 2009
A free Microsoft tool is available for download, designed to resolve failed installations of the second service pack for Windows Vista and Windows Server 2008. Labeled the System Update Readiness Tool, the utility comes in handy in various scenarios when updates can no longer be integrated on top of Vista SP1 and Windows Server 2008 SP1. An illustrative example of a glitch end users might stumble upon is a failed install of either Windows Vista Service Pack 2 or Windows Server 2009 SP2 accompanied by the following error code: 80070490. More Vista SP2 Failed Installations Fix Tool Available - Resolve code 80070490 errors-Softped
View 4 Replies
View Related
May 26, 2009
I have installed Microsoft Office 2007 SP2 from windows update...but i have a question....How can i delete this ''failed message'..not updates..only 'fail message'' from update history..look at this
View 4 Replies
View Related
Oct 13, 2008
when going to the windows update window,i get a white blank page and it says "the page failed to load"i did restart, same issue.
what is it all about?
and another thing, i don't have a Floppy drive in my computer however a Floppy A: drive is present in "Computer" how can i remove it from the list?
View 9 Replies
View Related
Mar 3, 2006
Ive been using it for a couple months its pretty cool. They just came out w/ an update for it which made the GUI more aero like. It has neat file sharing folders and a lot of games you can play with people.
View 7 Replies
View Related
Apr 10, 2008
I've been trying to process the following updates to Vista and each time I try to do so, the updates failed: "Update for Windows Vista (KB938371)" Failed 4/10/08 "Cumulative Security Update for Internet Explorer 7 in Windows Vista (KB47864)" Failed 4/9/08.
View 4 Replies
View Related
Aug 20, 2009
I'm running Vista Service Pack 1 on a Fujitsu Tablet PC (T4220). For several days, I've been unable to install the Vista Security Update KB971657. The update downloads, my machine reboots, and then an error message comes up "Updates not configured correctly." The machine shuts down, reboots, and then gives the message "reverting changes." When I go to Windows Update in the Control Panel, I see that the update failed, but no error code appears. So far I have:
1. Disabled my antivirus program (Kaspersky), and tried to download and install again, but no luck.
2. Done a clean boot by changing the settings in the System Configuration Utility, rebooted, and tried to download and install again, with no luck. In reading through this section of the forum, I see at least one case in which an update wouldn’t install because the user has Service Pack 1 but should have SP2. Should I try downloading SP2 and see if this resolves the problem? Though I’m curious why Microsoft hasn’t installed SP2 automatically on this machine since my settings are for automatic installation of updates.
View 2 Replies
View Related
May 19, 2008
I have windows vista home premium...Security Update for Microsoft. NET Framework, Version 1.1 Service Pack (KB929729)will download, but not install....Rec'ved error codes 80246005 and 643. It downloads over and over for months.....any connection to AOL or Trend Pc-Cillin?...I'm technically challenged, so please reply in step by step solution, if you have one.
View 9 Replies
View Related
May 21, 2008
I have attempted many times and failed to install a security update for Microsoft.NetFramework,version 1.1 service pack 1 (KB29729). I receive a failed to install with a Code 66A. I have tried to find an explanation for the code to no avail. This is listed as an important update for vista but I am stumped as to why it won't install.
View 7 Replies
View Related
Oct 4, 2009
Vista Home Basic SP2. When I try to run Windows update all I get is a blank page that says "The page failed to load". I've looked all around and have found a lot of people with the same or a similar problem but no firm solutions. I haven't used it in maybe a week and it's worked fine up till now. There have been no real changes since I used it last. Does anyone have a clue?
View 4 Replies
View Related
Feb 8, 2009
I have a factory install version of trend microcillin, if I unistall it how do I get it back if that is not the problem with the opening of attachements. As others have said I have been using it for over a year and had no problems until I updated vista lately
View 9 Replies
View Related
Nov 23, 2009
My Dell Inspiron 1520 laptop with Windows Vista Home Premium has failed to load the subject update on 20 different occasions since 13Nov09. The "Error Details" is Code 80073712, which is nothing more than a general error code with no specific fixes recommended.
View 7 Replies
View Related
Dec 12, 2009
After an automatic update from Windows failed to finish and computer shut down... I did a manual update but now the Photo Gallery says my picture files are corrupt. AND my system restore point ONLY shows today... no previous dates to restore to.
View 4 Replies
View Related
Apr 2, 2009
A few days ago, Windows Update Automatic updates installed an update on my computer called:
Windows Search 4.0 for Windows Vista (KB940157)
When I restarted my computer after this update I tried to log on and got this message:
The user profile service has failed the logon. User profile cannot be loaded.
I fixed this by booting into the F8 restore options on my Dell Laptop and used system restore to repair the problem
Today Windows Update Installed that same update again and the same problem arose which I again fixed with system restore.
Does anyone have any thoughts on this, like why should this update be causing my User Profile not to load?
Windows Vista Home Premium 32bit
View 6 Replies
View Related
May 29, 2009
When i installed IE 8 as part of a Windows update I now have a problem opening pictures and other attachments in Winmail. I note that everyone appears to be having a problem with this update. If it does not work, it needs to be removed from the updates for Windows Vista. Vista is enough of a pain without adding to it.
View 9 Replies
View Related
Aug 28, 2009
My system restore fails every time I attempt it. This has happened the last 3 times I had a need to attempt restore. (Three attempts separated by months in time, about different issues.) This time, I am thinking something may be wrong with my system restore function. In this case, it is simply a matter of trying to roll back a browser update. I saw a whole list of available restore points, and I went to the second one back - from only a few days ago. The restore failed. I am using Windows Vista Home Premium, OEM from Gateway Laptop about 1.5 yrs old. I allow most updates.
View 2 Replies
View Related
Dec 19, 2008
When the computer starts up it gets to the loading screen and then crashes: A blue screen comes up with a load of type on it but the system does a crash dump before I can read what it says. The computer then restarts with an option to continue normally or launch startup repair. I than launch startup repair and it says it "cannot repair this computer automatically".
The diagnostics and repair details are as follows: "Number of repair attempts: 13......
View 9 Replies
View Related
Jul 11, 2009
my system is crashed when i start it dosent load a blue screen appears and nothing happens it jsut restarts so plzz hlp me tell me wat i should doand 1 more thing it dosent open safe mode alsobut i hab backed up my system in other local disk tell me how to boot it
View 4 Replies
View Related
Jun 29, 2008
Noticed that this happened after a failed System Restore. I remember System Restore saying something about the HDD not being restored because it was not plugged in. I continued with the restore but it failed. I tried 3 times and the restore failed every time. Finally a restore in Safe Mode Worked. Now, when I plug in My Book Western Digital 500GB External HDD, Vista says that a driver could not be found. Even manually pointing to the System32 folder didn't work. I went to the WD website and no driver...just diagnostics and a control GUI or something. Since Vista can 'SEE' the HDD but can't 'OPEN THE DOOR', is there an alternate solution? I even ReInstalled the OS thinking that would somehow fix the problem. (I also had SP1). I need to be able to access this drive to recover Picture of my New Born baby Girl.
View 5 Replies
View Related
Jun 11, 2009
My neighbor bought a Compaq Presario with an AMD Athlon 64 bit processor which came installed with Windows Vista Home Basic 32 bit operating system. If he buys the upgrade to Windows Home Premium will the disk recognize he has a 64 bit processor and install the 64 bit operating system and not just upgrade to 32 bit Vista Home Premium system.
View 5 Replies
View Related
Mar 9, 2009
On my Dell Studio 17 I had Vista Ultimate x32 pre-loaded. I used a Vista Ultimate 64 bit CD to wipe it clean and hand-install. Interestingly enough, even though I checked the key/serial (that was on the sticker on the PC) re-checked and did it all over again, when the system went to auto-activate, it failed. So, I put in the same serial AGAIN after it failed , and voila - it worked! This is not the first time I've seen this though. My wife's desktop PC had Vista Home Premium on it, which I had to wipe in favor of WinXP Pro because of some incompatibilities with apps she was using for school. When she was done with those classes, I put Vista back on, and the exact same thing happened.
View 2 Replies
View Related
Dec 29, 2008
My laptop (Advent 8117 running Vista if that helps) has been working fine, then this morning things went pear-shaped. To begin with things worked as usual - Everything seemed to load up as normal, I left the room for maybe 5-10 minutes and when I returned there was a black screen. I waited a while and nothing happened so I restarted. It comes up with 'Windows failed to start. A recent hardware or software change might be the cause.' From there I can either start normally or run a repair. It doesn't seem to matter what I click here because I get a 'Techguys' support thing come up either way but now nothing on it works. To begin with I ran the Repair Environment, but it couldn't fix it. I also got to try a System Restore but I seem to have no points to restore to. Now I can't get the Techguys page to do anything. So I tried running in Safe Mode but once again I'm faced with the unmoving Techguys page, and the same goes for when I try and load from the Last Know Good Configuration. I desperatly don't want to have to lose everything.
View 9 Replies
View Related
Feb 25, 2008
I am new to Vista having just purchased a laptop with Vista Home Premium running on it. As a long time user of Windows XP, I have encounterd a Vista issue that perpelexes me. From my days with XP, I am quite used to access files in most system folders, to check on them or occasionly even modify them - for example changing the Startup layout. However, in Vista, I am unable to access such directories as "Application data" or "Local Settings" even while using my administrator account. These aand other inaccessible directories have a unique icon with an arrow running through it, as if they were shortcut files. This suggests that they are somehow special to Vista. My question is whether these files are really unacessable to all users with even the highest security privleges, or have I configured something wrong in Vista's rather "curious" security system?
View 6 Replies
View Related
Jun 13, 2009
I'm in the process of rebuilding my wife's Sony Viao after Sony reimaged the HD (Vista Home Premium) and got to the point where I wanted to create a restore point. This attempt failed, I went into SAFE mode and tried again and I get a message "The Volume Shadow Copy service used by System Restore is not working. For more information view the event log. (0x81000202). I go to the Event Viewer and it fails "Event Log service is unavailable. Verify that the service is running." When I go to the "Services" I don't see any entry for the "Event Log" - what should I be looking for? How do I get the system restore working?
View 4 Replies
View Related
Sep 29, 2009
I have my laptop(Vista Home premium 32 bit) fine and running from past 1 and half year.
Suddenly from 5 days I am facing 'Display driver nvlddmkm failed and restore successfully'. Don't know when and why this happens.So I thought of restoring my system to 5 days back.I selected System restore back up point to 23rd of September,09.During this process something got messed up and when restarted it is showing 'blue screen' . Nothing else is visible.I'm able to login through safe mode.but don't know what to do with this. I also tried to do system repair. But no use.Ended up with same.
Tried to do system restore again. Even if I want to reinstall Vista, manufacturer has not provided any backup cd with my laptop.
View 9 Replies
View Related
Aug 1, 2009
i have been trying to install some updates to my (new) Vista Business X64 SP2 system (4GB RAM). i get an error that says "The update does not apply to your system"
View 9 Replies
View Related
May 27, 2009
I noticed that sp2 for vista is out so I went to windows upgrade site and downloaded/installed sp2. So the computer is rebooting afterwards and my computer died, kinda. What I saw after the post was a trouble screen that told me I had a problem. At the top it said there was a problem that may have been caused by either new hardware or software recently installed. It said I should select from the menu below to fix the trouble.
View 4 Replies
View Related
Mar 23, 2008
How many times does the update for SP1 reboot your system? When I updated my old laptop to XP SP1, it did it several times.
View 4 Replies
View Related
Apr 11, 2007
I am trying to update the bios on my computer but I am running into problems when booting from a usb flash drive. I get the error: "Windows failed to start. A recent hardware or software change might be the cause. The boot selection failed because a required device is inaccessible."
I have been going about this process following instructions found here: Solution for Updating the BIOS on Windows Vista x64 Machines (VistaJuice)
View 5 Replies
View Related
Apr 28, 2010
there are so many updates that need to be download and install. the first time i have run the update my laptop kept on rebooting when installing an update. it kept telling me its installing 3of3. i had to restore my system. now i have to update again.
View 4 Replies
View Related
