System Crashed All Failed

Jul 11, 2009

my system is crashed when i start it dosent load a blue screen appears and nothing happens it jsut restarts so plzz hlp me tell me wat i should doand 1 more thing it dosent open safe mode alsobut i hab backed up my system in other local disk tell me how to boot it

View 4 Replies


ADVERTISEMENT

System Crashed During Install

Aug 2, 2009

Was installing service pack 2 and system crashed now can not even get back to my old vista. Seems to be loading and then I get: !!oxc 0190005!! 9293/45274 (registrymachineschemawcm.//microsoft-...) Then it freezes. I let it stay here for 18 hours and nothing. Tried to boot with my old vista windows disk and can not get a fix or get back to loading anything. Latest error said windows can not fix problem. Frequant black screen of death after bios or it goes to above point and stops.

View 4 Replies View Related

System Crashed No Restart

Oct 23, 2009

I have a Sony laptop with Windows Vista as operating system. The system crashed. So I initialised a new start via CTRL, ALT and DEL. Unfortunately, the shut down process got stuck and the screen just displays "shut down" without doing anything. It remained like this for a couple of minutes when I hold the turn-on/off button pressed. I was expecting to force my laptop to restart again (which is the usual case on a Windows XP machine). However, my laptop just went to the stand-by modus. Pressing the turn-on/off gave back the frozen display of "shut down".

View 4 Replies View Related

64 Media Player, System Crashed

Dec 17, 2008

Last night I loaded software for my new digitol camera, and after installation, I chose to reboot so new drivers would take effect. System crashed, Did not see fine print on CD that said it did not work with Vista 64 until after the fact. I was asked on screen to put in Vista 64 disk and try to repair, no luck. Only option available was to restore, the problem here was a newly built computer within the last two months and I failed to backup drives, this won't happen again. Delema was losing over half of the cd's that I loaded from a total of 2437. I had my music on a separate terabyte drive from the operating system. When you look at the music folder on the drive, albums were missing, but total gigabyte of folder had not changed, it was still a total of 277 GB. In the media player, I had checked the block to add recently deleted files and this brought back all 2437 albums in media player only, but if I look in music folder on drive under specific artist that had let say 11 albums, it only shows two in the folder. Now can someone tell me where in the heck did these go.

I did delete some older music files prior to rebuting computer, because I had replaced the 128KBPS files with 320 KBPS files, but always check to make sure number of albums in music folder matched what was in media folder, and they did match before rebooting. Is it possible to recover something after you emptied the recycle bin? Media player shows 2437 albums, music folder over half files are gone. I could probably sinc them album by album to a usb drive, or un-box my complete cd collection and load each one in again, but that would take forever, I know someone with insight can offer a better solution. I'm Desperate, and flipping out over this.

View 4 Replies View Related

System Crashed, Desktop Dissapears

Mar 5, 2009

I just built me a new rigg and im having problems installing Vista Ultimate 64-bit.After i do a fresh install and update all the drivers it'll work for a few hours and all of a sudden my desktop dissapears and all my problems are gone, i then try to restart it and first thing that pops up is volume panel missing with a yellow exclaimation mark, my wallpaper has dissapeared i try to open any file/game that i install manually by going into the folder it say this program has been move or no longer on this hdd.Im only using one hdd.This is my 4th time installing vista 64 ult it happens everytime, and my vista has not last two full days of use and it runs into the same problem.I thought it may have been my hardware but i have checked them all out ran memtest rams are good tested psu.Only thing i can come up with is that its either my motherboard or it can be vista.I have until about the 17th of this month to fix this problem if not i guess i would be returning board and cpu and just return to windows pro.

View 4 Replies View Related

Desktop Crashed Reformatting System

Dec 15, 2009

My desktop crashed on me when i was reformatting it, after countless tries and couple versions of Linux, I found my old vista CD and decided to throw that on there because its the only system that i am fairly familiar with and that doesnt need codes to run stuff :P. Anyways after I put vista on it, my PC's USB ports that used to work fine have been acting weird, I tried to plug my wireless usb adapter which works on my laptop running win7 and my other desktop running win vista home basic, but with this pc it keeps saying that the device has malfunctioned. After i plug the device in it, it downloads the drivers for it but then says that it has malfunctioned. Oh and also i cant even put a usb stick on.

The funny thing is Device Manager says they are all ok and working fine. ALL 6 OF THEM ARE MALFUNCTIONING lol. (2 FRONT 4 BACK) so i was wondering if you guys could lend me helping hand and tell me what my problem is and how i can fix it. Oh here is a funny thing, with linux, my usb device used to work for it for like 30 mins and then it would cut out. Propably should mention that the device is a Zioncom WL0123 Wireless USB adapter that is supposably VISTA READY. I have done alot of research but have gotten nowhere, and i have done the whole unistall usb's and everything.

View 4 Replies View Related

System Crashed, Wont Boot Up

Aug 10, 2008

I have a newish laptop wunning vista home basic which crashed. It wont boot up I have tried chkdsk which found no problems, the windows repair thing cant diagnose the problem and it still wont work.

View 8 Replies View Related

System Crashed Does Not Recongniz Graphics Card

Feb 2, 2009

I recently re-installed vista home premium back on my vaio vgn-fz17g laptop after the system crashed and i noticed a few problems. 1. the computer wont read an sd card. 2. the computer does not recognise my graphics card. 3.i have an unknown device on my device manager. 4. my "UGX"? has no drivers (and none can be found) 4. my base score used to be 4.0 today i installed another gb of ram and i checked my base score and instead of going up it went down to 1.0 i cant even use aero anymore. the base score is where i realised my graphics card disappeared all that shows up in device manager is standard vga graphics adapter when i have a 512mb graphics card somewhere inside.

View 6 Replies View Related

Computer Crashed, No System Restore Points

Nov 17, 2008

I blew out the keyboard, (thought something might have gotten down there and was the cause of this) but still no change. I tried to restart my Vista Ultimate x64, but because it was keying that letter it just kept trying to search. So I had to hit the power button. This is where it gets weird. Upon restart, it goes to some sort of recovery wizard. No log-in screen, just this wizard. If I cancelled it, my system would reboot. So, after 6 different cancels / restarts, I tried it. It did a recovery that set up two partitions on my HD, but ERASED EVERYTHING. Anything that was not installed originally on the computer was erased. There are no system restore points (Deleted as well) Don't worry, I back-up fairly often. But I'd like to know what the hell happen.

View 4 Replies View Related

Crashed, Lost System Disc, Windows Product Key

Apr 6, 2009

my stepdaughter's laptop's hd crashed (unusable), she of course lost the system disc. I have my laptop and system disc, both laptops are gateway but different models 6752 and 6836. I have a new hd on order, and I will install vista with my disc and her windows product key (her laptop) I shouldn't have any problem with that right?

View 9 Replies View Related

System Restore Failed, OEM

Aug 28, 2009

My system restore fails every time I attempt it. This has happened the last 3 times I had a need to attempt restore. (Three attempts separated by months in time, about different issues.) This time, I am thinking something may be wrong with my system restore function. In this case, it is simply a matter of trying to roll back a browser update. I saw a whole list of available restore points, and I went to the second one back - from only a few days ago. The restore failed. I am using Windows Vista Home Premium, OEM from Gateway Laptop about 1.5 yrs old. I allow most updates.

View 2 Replies View Related

System Crash: All Has Failed

Dec 19, 2008

When the computer starts up it gets to the loading screen and then crashes: A blue screen comes up with a load of type on it but the system does a crash dump before I can read what it says. The computer then restarts with an option to continue normally or launch startup repair. I than launch startup repair and it says it "cannot repair this computer automatically".

The diagnostics and repair details are as follows: "Number of repair attempts: 13......

View 9 Replies View Related

Failed System Restore: Can Not Access HDD

Jun 29, 2008

Noticed that this happened after a failed System Restore. I remember System Restore saying something about the HDD not being restored because it was not plugged in. I continued with the restore but it failed. I tried 3 times and the restore failed every time. Finally a restore in Safe Mode Worked. Now, when I plug in My Book Western Digital 500GB External HDD, Vista says that a driver could not be found. Even manually pointing to the System32 folder didn't work. I went to the WD website and no driver...just diagnostics and a control GUI or something. Since Vista can 'SEE' the HDD but can't 'OPEN THE DOOR', is there an alternate solution? I even ReInstalled the OS thinking that would somehow fix the problem. (I also had SP1). I need to be able to access this drive to recover Picture of my New Born baby Girl.

View 5 Replies View Related

64 Bit Upgrade From 32 Bit: Operating System Failed

Jun 11, 2009

My neighbor bought a Compaq Presario with an AMD Athlon 64 bit processor which came installed with Windows Vista Home Basic 32 bit operating system. If he buys the upgrade to Windows Home Premium will the disk recognize he has a 64 bit processor and install the 64 bit operating system and not just upgrade to 32 bit Vista Home Premium system.

View 5 Replies View Related

System Went Auto Activation Failed

Mar 9, 2009

On my Dell Studio 17 I had Vista Ultimate x32 pre-loaded. I used a Vista Ultimate 64 bit CD to wipe it clean and hand-install. Interestingly enough, even though I checked the key/serial (that was on the sticker on the PC) re-checked and did it all over again, when the system went to auto-activate, it failed. So, I put in the same serial AGAIN after it failed , and voila - it worked! This is not the first time I've seen this though. My wife's desktop PC had Vista Home Premium on it, which I had to wipe in favor of WinXP Pro because of some incompatibilities with apps she was using for school. When she was done with those classes, I put Vista back on, and the exact same thing happened.

View 2 Replies View Related

Windows Failed To Start, System Restore

Dec 29, 2008

My laptop (Advent 8117 running Vista if that helps) has been working fine, then this morning things went pear-shaped. To begin with things worked as usual - Everything seemed to load up as normal, I left the room for maybe 5-10 minutes and when I returned there was a black screen. I waited a while and nothing happened so I restarted. It comes up with 'Windows failed to start. A recent hardware or software change might be the cause.' From there I can either start normally or run a repair. It doesn't seem to matter what I click here because I get a 'Techguys' support thing come up either way but now nothing on it works. To begin with I ran the Repair Environment, but it couldn't fix it. I also got to try a System Restore but I seem to have no points to restore to. Now I can't get the Techguys page to do anything. So I tried running in Safe Mode but once again I'm faced with the unmoving Techguys page, and the same goes for when I try and load from the Last Know Good Configuration. I desperatly don't want to have to lose everything.

View 9 Replies View Related

Update Failed: System Readiness Tool?

Nov 15, 2009

sp2 update started this way .so far ive deleted pending.xml file/installed new updater/run chkdsk/downloaded and installed sp2 standalone. nothing seems to work. i have an hp dv9000 laptop with sp1 installed and its set for micro auto updates. ive been trying for about 4 days now to get it to work. i also have avast anti virus installed.now i get update failed without the error code but tells me to the system readiness tool wich i did that too.

View 8 Replies View Related

Access Files In Most System Folders Failed

Feb 25, 2008

I am new to Vista having just purchased a laptop with Vista Home Premium running on it. As a long time user of Windows XP, I have encounterd a Vista issue that perpelexes me. From my days with XP, I am quite used to access files in most system folders, to check on them or occasionly even modify them - for example changing the Startup layout. However, in Vista, I am unable to access such directories as "Application data" or "Local Settings" even while using my administrator account. These aand other inaccessible directories have a unique icon with an arrow running through it, as if they were shortcut files. This suggests that they are somehow special to Vista. My question is whether these files are really unacessable to all users with even the highest security privleges, or have I configured something wrong in Vista's rather "curious" security system?

View 6 Replies View Related

System Restore Is Not Working, Attempt Failed

Jun 13, 2009

I'm in the process of rebuilding my wife's Sony Viao after Sony reimaged the HD (Vista Home Premium) and got to the point where I wanted to create a restore point. This attempt failed, I went into SAFE mode and tried again and I get a message "The Volume Shadow Copy service used by System Restore is not working. For more information view the event log. (0x81000202). I go to the Event Viewer and it fails "Event Log service is unavailable. Verify that the service is running." When I go to the "Services" I don't see any entry for the "Event Log" - what should I be looking for? How do I get the system restore working?

View 4 Replies View Related

System Restore Failed Not Able To Boot Up - Blue Screen

Sep 29, 2009

I have my laptop(Vista Home premium 32 bit) fine and running from past 1 and half year.
Suddenly from 5 days I am facing 'Display driver nvlddmkm failed and restore successfully'. Don't know when and why this happens.So I thought of restoring my system to 5 days back.I selected System restore back up point to 23rd of September,09.During this process something got messed up and when restarted it is showing 'blue screen' . Nothing else is visible.I'm able to login through safe mode.but don't know what to do with this. I also tried to do system repair. But no use.Ended up with same.
Tried to do system restore again. Even if I want to reinstall Vista, manufacturer has not provided any backup cd with my laptop.

View 9 Replies View Related

System Hanging: Search Service Has Failed To Create The SystemIndex Search Index

Jul 29, 2009

Ive ran all the usual virus and malware checks and all is clear. Ive checked Event Viewer I see an error every 2 minutes or so. Error message with red exclamation is: 'The Windows Search Service has failed to create the SystemIndex search index. Internal error 1, 0x800700b7, Failed to add Gather Application: Windows>.'' After this warning icon shows error message: 'The Windows Search Service is attempting to remove the old catalog.' Next another warning icon shows message:..........

View 7 Replies View Related

Ultimate Crash: Failed Check The File System Integrity Check

Mar 26, 2008

Vista started giving a blue screen a couple of days ago. Mentioned something about a bad device, but no new devices have been added. Went through the typical steps, tried to boot in safe mode and got the following errors:

AtBroker.exe The application failed to initialize properly. Click OK.
Explorer.exe The application failed to initialize properly. Blue Screen

Then booted to my install dvd, tried to fix errors. Came back with a failed check at the file system integrity check. Ran the check a second time and no errors are found. Can't boot in safe mode, and when i try to repair errors I get no errors found.

View 6 Replies View Related

X64 System Builder "Windows Failed To Start"

Feb 6, 2009

I have just built my first computer. My whole family is a mac family but i have always found vista easy to use on my friends computers. I bought Microsoft Windows Vista Home Premium SP1 64-bit for System Builders - OEM from newegg. Now when i boot from The disc it says "Loading windows file...." and once it is done with that an error appears saying. "Windows failed to start. a Recent hardware or software change might be the cause, to fix this problem....."

It gives me ways to fix it but all of them require some OS to be on the computer and i have none.. It also says: File: windowssystem32ootwinload.exe......

View 5 Replies View Related

Windows Update Failed 'failed Message'

May 26, 2009

I have installed Microsoft Office 2007 SP2 from windows update...but i have a question....How can i delete this ''failed message'..not updates..only 'fail message'' from update history..look at this

View 4 Replies View Related

Failed RAID Mirror, Both Drives Failed

May 23, 2008

I am running Vista on a Dell XPS 420. I came home to find both drives failed in a RAID 1 mirror. Dell gave me no help recovering data, but did send two new drives. I have installed Vista on one of the new drives without RAID. I wanted to see if I could recover any files from the failed drives, but I can't seem to get Vista to recognize either of the old drives that were in the failed RAID array. The failed drive does appear during boot up and still shows as part of a failed array. How can I get Vista to recognize the failed drive so that I can then attempt to run file recovery software on it?

View 4 Replies View Related

Crashed, Cannot Repair

Apr 24, 2008

Hello, my son's pc crashed and will only boot to the black screen with green loading bar, then quits. Monitor keeps going to sleep.

I tried everything: system repair (which says it can't do - corrupt registry). Restore (can't - no restore point was set.) Go back to last known good config - won't work it crashes.

I ran a memory test and all was good.

So, I saw on this site where it was advised to do an upgrade/repair, but I can't because the option is grayed out and disabled. I tried starting with the disc in, and also by starting and then putting the disk in. If I wait until the machine starts and put the disk in, it will not work. It crashes. If I put the disk in and then start the machine is when I get to the install screen and eventually the 'update is disabled' screen.

I'm really trying to avoid a new install. I wonder if there is a way to get around the disabled thing in my case?

View 9 Replies View Related

Last Chaos Crashed

Jan 19, 2009

I have a dell Inspiron 1525 with vista home premium and I resently downloaded Last chaos and I tried to play it, and It was fine logging in fine for a couple of seconds and then it crashed. anyone know how to make it work? when it crashes my computer is fine, the screen is fine everything is it simply says, program not responding so i exit out ive uninstalled it and re installed it and run it as an adminstrator nothings working

View 5 Replies View Related

Computer Crashed;

Aug 9, 2008

my computer crashed and I tried to recover it using a recovery disk.. but suddenly I choosed and click the TOSHIBA recovery wizard.. And there's a 2 option...Recovery of factory Default Software and the 2nd option is Erase the hard disk(delete all the data and partitions from your hard disk) then I took 10 hours of this..then when it finished the process.. I try to restart my laptop then suddenly appears this word with a black screen.. (invalid partition table)

View 6 Replies View Related

Photoshop 7 Crashed

Oct 26, 2007

Everytime i start Photoshop 7 Windows Data execution prevention closes the application with the following message. I am running Windows vista ultimate 64 bit.

View 4 Replies View Related

Outlook Crashed

May 5, 2008

I find every morning Outlook crashed. Computer is continuously busy (25% of CPU)Rebooting solves the problem, but next morning again crash. Only program running during the night (as far as I can see) is Windows Defender.

View 4 Replies View Related

Crashed Will Not Boot

Mar 23, 2008

my PC crashed and will not boot, the NTOSKRNL.EXE is missing or corrupt, repair from the DVD does nor fix the problem. I need to reinstall but the only option I get when bootin from the DVD is to "Install from Windows" but Windows will not boot up.What can I do?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved