System Crashed During Install
Aug 2, 2009
Was installing service pack 2 and system crashed now can not even get back to my old vista. Seems to be loading and then I get: !!oxc 0190005!! 9293/45274 (registrymachineschemawcm.//microsoft-...) Then it freezes. I let it stay here for 18 hours and nothing. Tried to boot with my old vista windows disk and can not get a fix or get back to loading anything. Latest error said windows can not fix problem. Frequant black screen of death after bios or it goes to above point and stops.
View 4 Replies
ADVERTISEMENT
Nov 11, 2008
Tried installing Kaspersky Anti-Virus 2009 (KAV) on a friends Vista machine and it crashed during the install. I was required to use the last restore point to get the machine up and running. Has anyone had similar issues w/KAV & Vista 64-bit? When I tried to install KAV initially it found Norton and would not install. I removed Norton but did not reboot before installing KAV. Does anyone think this might be the cause? I am reluctant to try again as the computer is for my friends business and he lost a few files when I went to the restore point.
View 4 Replies
View Related
Oct 23, 2009
I have a Sony laptop with Windows Vista as operating system. The system crashed. So I initialised a new start via CTRL, ALT and DEL. Unfortunately, the shut down process got stuck and the screen just displays "shut down" without doing anything. It remained like this for a couple of minutes when I hold the turn-on/off button pressed. I was expecting to force my laptop to restart again (which is the usual case on a Windows XP machine). However, my laptop just went to the stand-by modus. Pressing the turn-on/off gave back the frozen display of "shut down".
View 4 Replies
View Related
Jul 11, 2009
my system is crashed when i start it dosent load a blue screen appears and nothing happens it jsut restarts so plzz hlp me tell me wat i should doand 1 more thing it dosent open safe mode alsobut i hab backed up my system in other local disk tell me how to boot it
View 4 Replies
View Related
Mar 26, 2008
I have 2 pc's with xp, each with ide drives, One crashed, so I removed the hard drive to run as a slave on my other pc to see if I could retrieve the data. When I did this, the ribbon pulled loose just enough to shut down my drive (yes on the good one). I now have to reboot with original boot disk, which I no longer have. So I go and buy Vista Home Premium, then first am able remove the data (via knoppix) from the old crashed drive (first one). So I put this drive into the 2nd pc as master, and attempt to install Vista.
I get past the "loading software" and then the "windows" progess bar screens, and the screen goes to a black screed with nothing but a mouse arrow on it.
View 9 Replies
View Related
Apr 4, 2009
Never in my llife have I seen a problem with INstaller, but it's happening. In fact, this OS keeps coming up with new bummers, that I haven't had befor. It hard crashed after a few weeks of operation, and a mini hard stroke this week, forget the old blu screen of death, this one has it's one, just discised a little. I've heard one can convert back to XP, but having skipped that one, I don't know how it is. Please put on thinking caps for me as I'm stumped and every thing puiter related is getting more difficult as time goes on.
View 6 Replies
View Related
Dec 17, 2008
Last night I loaded software for my new digitol camera, and after installation, I chose to reboot so new drivers would take effect. System crashed, Did not see fine print on CD that said it did not work with Vista 64 until after the fact. I was asked on screen to put in Vista 64 disk and try to repair, no luck. Only option available was to restore, the problem here was a newly built computer within the last two months and I failed to backup drives, this won't happen again. Delema was losing over half of the cd's that I loaded from a total of 2437. I had my music on a separate terabyte drive from the operating system. When you look at the music folder on the drive, albums were missing, but total gigabyte of folder had not changed, it was still a total of 277 GB. In the media player, I had checked the block to add recently deleted files and this brought back all 2437 albums in media player only, but if I look in music folder on drive under specific artist that had let say 11 albums, it only shows two in the folder. Now can someone tell me where in the heck did these go.
I did delete some older music files prior to rebuting computer, because I had replaced the 128KBPS files with 320 KBPS files, but always check to make sure number of albums in music folder matched what was in media folder, and they did match before rebooting. Is it possible to recover something after you emptied the recycle bin? Media player shows 2437 albums, music folder over half files are gone. I could probably sinc them album by album to a usb drive, or un-box my complete cd collection and load each one in again, but that would take forever, I know someone with insight can offer a better solution. I'm Desperate, and flipping out over this.
View 4 Replies
View Related
Mar 5, 2009
I just built me a new rigg and im having problems installing Vista Ultimate 64-bit.After i do a fresh install and update all the drivers it'll work for a few hours and all of a sudden my desktop dissapears and all my problems are gone, i then try to restart it and first thing that pops up is volume panel missing with a yellow exclaimation mark, my wallpaper has dissapeared i try to open any file/game that i install manually by going into the folder it say this program has been move or no longer on this hdd.Im only using one hdd.This is my 4th time installing vista 64 ult it happens everytime, and my vista has not last two full days of use and it runs into the same problem.I thought it may have been my hardware but i have checked them all out ran memtest rams are good tested psu.Only thing i can come up with is that its either my motherboard or it can be vista.I have until about the 17th of this month to fix this problem if not i guess i would be returning board and cpu and just return to windows pro.
View 4 Replies
View Related
Dec 15, 2009
My desktop crashed on me when i was reformatting it, after countless tries and couple versions of Linux, I found my old vista CD and decided to throw that on there because its the only system that i am fairly familiar with and that doesnt need codes to run stuff :P. Anyways after I put vista on it, my PC's USB ports that used to work fine have been acting weird, I tried to plug my wireless usb adapter which works on my laptop running win7 and my other desktop running win vista home basic, but with this pc it keeps saying that the device has malfunctioned. After i plug the device in it, it downloads the drivers for it but then says that it has malfunctioned. Oh and also i cant even put a usb stick on.
The funny thing is Device Manager says they are all ok and working fine. ALL 6 OF THEM ARE MALFUNCTIONING lol. (2 FRONT 4 BACK) so i was wondering if you guys could lend me helping hand and tell me what my problem is and how i can fix it. Oh here is a funny thing, with linux, my usb device used to work for it for like 30 mins and then it would cut out. Propably should mention that the device is a Zioncom WL0123 Wireless USB adapter that is supposably VISTA READY. I have done alot of research but have gotten nowhere, and i have done the whole unistall usb's and everything.
View 4 Replies
View Related
Aug 10, 2008
I have a newish laptop wunning vista home basic which crashed. It wont boot up I have tried chkdsk which found no problems, the windows repair thing cant diagnose the problem and it still wont work.
View 8 Replies
View Related
Feb 2, 2009
I recently re-installed vista home premium back on my vaio vgn-fz17g laptop after the system crashed and i noticed a few problems. 1. the computer wont read an sd card. 2. the computer does not recognise my graphics card. 3.i have an unknown device on my device manager. 4. my "UGX"? has no drivers (and none can be found) 4. my base score used to be 4.0 today i installed another gb of ram and i checked my base score and instead of going up it went down to 1.0 i cant even use aero anymore. the base score is where i realised my graphics card disappeared all that shows up in device manager is standard vga graphics adapter when i have a 512mb graphics card somewhere inside.
View 6 Replies
View Related
Nov 17, 2008
I blew out the keyboard, (thought something might have gotten down there and was the cause of this) but still no change. I tried to restart my Vista Ultimate x64, but because it was keying that letter it just kept trying to search. So I had to hit the power button. This is where it gets weird. Upon restart, it goes to some sort of recovery wizard. No log-in screen, just this wizard. If I cancelled it, my system would reboot. So, after 6 different cancels / restarts, I tried it. It did a recovery that set up two partitions on my HD, but ERASED EVERYTHING. Anything that was not installed originally on the computer was erased. There are no system restore points (Deleted as well) Don't worry, I back-up fairly often. But I'd like to know what the hell happen.
View 4 Replies
View Related
Apr 6, 2009
my stepdaughter's laptop's hd crashed (unusable), she of course lost the system disc. I have my laptop and system disc, both laptops are gateway but different models 6752 and 6836. I have a new hd on order, and I will install vista with my disc and her windows product key (her laptop) I shouldn't have any problem with that right?
View 9 Replies
View Related
May 15, 2010
My Toshiba Labtop has crashed.I think a shared file was deleted. Labtop was operating under Windows Vista Home Premium 64 bit.It happened right after uninstalling Java; because the dang updates kept popping up and it was getting annoying. Now whenever i start it, it comes to a black screen and a minute later a cursor pops up. Safe mode does not work.I have tried the recovery disk, but to no avail.I know im doing right because i purchased some Boots Disks off ebay and they come right up (PC wizard; Pc doctor).So i bought Windows Vista Ultimate and tried to install and i cant get to install thru boot.I ither need to know how to install windows thru boot, but id much rather just fix current windows.
View 4 Replies
View Related
Mar 26, 2008
Made the dive to Vista 64 on a new build. It is on an Asus Maximus Extreme with 2 gig of RAM and an 8800 Ultra video card. I setup to WD raptors in RAID 0. verything with the install seemed to go without a hitch. The install is from a Vista Ultimate 64 builders pack. The install starts with no problems at all and it sees my raid array without installing any drivers. The install does the copy, expansion and so on without a hickup. It is after I enter a user name and password, date, etc and the system initiates into its "performance check" when it completely hangs. It never leaves the first splash screen of the performance check. I let it sit for over an hour and still no progress.............
View 4 Replies
View Related
Mar 6, 2009
Currently My Vista Home Premium SP1, 32bit, has IE7 running and I downloaded IE8 from the official MS site. Questions: 1. Is it advisible to have IE8 in my system? And if so, 2. Can I just install IE8 over the old version, or is there a special procedure? And if so, 3. What does it consist of? Open-Minded.
View 9 Replies
View Related
Feb 21, 2009
I would like to try a system repair but when I put my windows vista premium disk into the dvd player it only gives me the option to install and not repair. How do I go about getting the repair option?
View 7 Replies
View Related
Jun 27, 2008
I was informed by the developers over at Flagship Studios that I may have a corrupt install of DX10 on my system. I went to reinstall DX10 but it tells me that I have the most up to date version and aborts the install. Does anyone know a way I can reinstall DX10? Also, I would like to try intalling DX9c to see if it helps any. Can someone link me to wich download I should use for this?
View 7 Replies
View Related
Jul 8, 2008
I have (or had) Vista Business on my HP Pavilion dv2670br and I also installed opensolaris on it. I had read this article (Vista SP1 won't install on dual-boot systems: Microsoft) before installing the SP with the stand alone file downloaded from MS's website, but since I did not have Enterprise or Ultimate I didn't think I would have problems. Silly me.
Now I do not know if it is the grub loader itself or the fact that opensolaris uses ZFS. I tried going through the steps here: Recovering the Vista Bootloader from the DVD - NeoSmart Technologies Wiki, to no avail. I suspect I will have to go through a very destructive process, but thankfully I won't really lose much since it is a relatively new laptop with very little university work on it.
View 6 Replies
View Related
Aug 11, 2008
I build a computer last night for a relative and could not get a clean install on the system, always got BSOD. I tried XP Pro (error), Vista Ultimate x86 and even Vista Ultimate x64 but always had some issue. I did remove all external USB/Firewire/Sound/TV Tuner card etc so it was only running on Mainboard/1 Ram Stick/HDD/ DVD Burner and Video card. Still get an BSOD so i changed the RAM for one out of my wifes computer but it didnt make a difference. Hate to think my sister inlaw got a faulty product as she has gone back home out west with reciept and had to leave the computer with me to resolve the issue. Any ideas what maybe causing this as i had a late night on it and i am to damn tired to think of what else apart from a fauly pasrt it could be.
View 7 Replies
View Related
Apr 25, 2009
i have tried to re-install the vista operating system on my sons packard bell pc using the recovery partition but this has failed it hangs at the "starting windows for the first please wait" screen we weren't given a disk so i am downloading a copy and want to activate it using the proper key that came with the pc but it isn't printed on the case so i am stuck as to what i can do the pc was bought from curries christmas 2007 do i have any options through them or packard bell
View 8 Replies
View Related
Mar 23, 2008
I did a hard install of SP1 over two hours ago on my desktop. The system installed and configured updates-went up to 100%..however...it is still hanging-what I mean by that is I am still on the blue installation screen and it says "Configuring Updates-do not turn off computer" I am not sure what to do...should I just shut it off and restart?
View 4 Replies
View Related
Jun 6, 2008
I recently built a new computer and I would like to move my current install of Vista to the new system without reinstalling it. My only problem is that both setups will be using a raid 0 array for the installation and I don't know if I will be able to boot off the old disks with the new hardware. My old PC was a nForce 4 based AMD rig and my new one is a P35 based Intel rig. Is there a way that I can install the drivers for the new raid array prior to booting with it?
View 5 Replies
View Related
Jul 29, 2009
I need wipe off entire C drive and perform a clean install Vista over current installed Vista. Here is the steps I went through and had problem finally:
1. I boot up with Vista Home Edition DVD;
2. Get on "Install Now" window, and click the "Install Now" get into next step;
3. The update option is disabled (which is good because I need clean install), I click the advanced option, the next window only show couple partitions without showing C drive!
4. After all the tries to load drive, refresh drive, etc. The C drive never show up!!
How can I get clean re-install over exist vista system?
View 5 Replies
View Related
Jun 3, 2008
Windows Update has not yet installed SP1 on my Vista Home Premium system. Should I install it manually?
View 9 Replies
View Related
Jun 27, 2008
I had to reinstall all of my software due to a corrupted system file. After re-installing Microsoft Office, I am having difficulty with getting my Microsoft Frontpage re-installed. How do I get this program re-installed?
View 9 Replies
View Related
Jun 29, 2008
I partitioned a new hard drive and formatted it using my Windows XP Home Ed. SP2 Install CD. I then installed Win XP. I then installed Windows Vista Home Premium 64 bit on the other partition. ( I have two partitions on a single drive, C: and D This has been working great for me for the last 5 months. Today I have a reason to perform a repair install on just the Windows XP partition. I have performed a Win XP repair install successfully in the past using the XP SP2 install CD but never when my system was set up as dual boot. If I perform a repair install using my WinXP install disk to repair the Windows XP installation, will this leave my Vista partition untouched? Will it at all interfere with the system's ability to multi boot? I'm not very concerned about not being able to boot up into Windows XP but it's extremely critical that my system's ability to boot up into Vista is not compromised.
View 6 Replies
View Related
Dec 2, 2009
Ive just formatted my hard drive and got a new graphics card -ATI 4870. When I try to run a game, using 'steam' it tries to install directx before failing, so I found the download myself and tried, it failed. The error said: 'INTERNAL SYSTEM ERROR OCCURRED refer to DxError.log and DirectX.log in your windows folder to determine problem.' So what any ideas, I need directx but I cant have directx. Wasnt sure if this post should go in here, gaming or graphics card. I figured here as its more a software issue.
View 5 Replies
View Related
Sep 4, 2008
i bought this acer PC and i hate the recovery disc. i have a cd key on the side of my case. Can't i borow a Vista home premium 32bit disc and use the cd key on the side of my case because i H8 recovery disc's. it doesn't give the options to format or which hdd to install system on
View 9 Replies
View Related
Jul 29, 2009
A friend's Vista SP1 PC is failing to install Windows Updates and also some other updates such as those for Itunes. The symptom is that the updates get downloaded but the installation phase never finishes (he's left it for 12 hours!). In the case of the Windows Updates, there are several updates that try to install themselves as the PC is shutdown or even restarted, but the message "Installing 1 of 6" never advances: the only recourse is to switch the PC off.
As I was looking at the PC, I noticed one thing which may have a bearing on this and may even be the cause: the System Restore applet (windowssystem32 strui.exe) fails to run. It displays an initial User Account Control window but the "Restore System Files and Settings - choose a restore point" window never appears. No error message is displayed and there are no entries in any of the Event Log logs.
It occurred to me that if System Restore is buggered, this might prevent any updates working if the first thing they try to do is to create a restore point before installation begins. I can't find any reference to System Restore failing to open its initial Window - I've looked on support.microsoft.com and done a general Google search for "Vista System Restore fails". All the info seems to describe possible problems if you get slightly further and select a restore point which then fails to install properly.
View 7 Replies
View Related
Apr 24, 2008
Hello, my son's pc crashed and will only boot to the black screen with green loading bar, then quits. Monitor keeps going to sleep.
I tried everything: system repair (which says it can't do - corrupt registry). Restore (can't - no restore point was set.) Go back to last known good config - won't work it crashes.
I ran a memory test and all was good.
So, I saw on this site where it was advised to do an upgrade/repair, but I can't because the option is grayed out and disabled. I tried starting with the disc in, and also by starting and then putting the disk in. If I wait until the machine starts and put the disk in, it will not work. It crashes. If I put the disk in and then start the machine is when I get to the install screen and eventually the 'update is disabled' screen.
I'm really trying to avoid a new install. I wonder if there is a way to get around the disabled thing in my case?
View 9 Replies
View Related
