I would like to try a system repair but when I put my windows vista premium disk into the dvd player it only gives me the option to install and not repair. How do I go about getting the repair option?
View 7 Replies
I partitioned a new hard drive and formatted it using my Windows XP Home Ed. SP2 Install CD. I then installed Win XP. I then installed Windows Vista Home Premium 64 bit on the other partition. ( I have two partitions on a single drive, C: and D This has been working great for me for the last 5 months. Today I have a reason to perform a repair install on just the Windows XP partition. I have performed a Win XP repair install successfully in the past using the XP SP2 install CD but never when my system was set up as dual boot. If I perform a repair install using my WinXP install disk to repair the Windows XP installation, will this leave my Vista partition untouched? Will it at all interfere with the system's ability to multi boot? I'm not very concerned about not being able to boot up into Windows XP but it's extremely critical that my system's ability to boot up into Vista is not compromised.
View 6 Replies View RelatedMy computer came with Vista Home Premium installed. I also received a disk marked:- "For distribution with a new Ev**** PC".(supplier's name). I recently had some problems. I booted from the disk. The only option I got was to install Vista. There was no option to "repair your computer" so I could not use startup repair or system restore. I had to reinstall Vista. Also there was no option to do a custom install. Do I not have the complete Vista Home Premium on my disk?
View 9 Replies View RelatedI have an HP notebook with Vista Home Premium and after running SFC I have a few corrupted files.
Question is there a way to bring in the original files when the OEM didn't send an install DVD or will offer one at all?
All I have is the recovery partition with the option to "repair to original factory condition" which from what I gather means erasing all my settings and personal files.
I have made a recovery disc (from the partition) and I have the "Anytime Upgrade DVD," and I'm curious is there any way to access the upgrade DVD to get to those files or even do a real repair of Vista without losing settings and personal files?
In wanting to do a repair install (keeping existing programs etc), on running Recovery CD, I get the message.
"Upgrade has been disabled vand cannot be started. To upgrade, cancel the installation and then choose to upgrade to a version of windows that is more recent than the versiopn you are currently running"
I'm running Vista Home Premium (fully updated) but suspecting that I may have a problem, I thought I could do a repair install but it seems all I can do is either a clean install and thus lose everything or upgrade to I assume Business or Ultimate Editions of Vista. Why can't I do a repair install from Vista Recovery CD?
I am running Vista Home Premium and want to do a "repair install." I have an OEM DVD with Vista. I have performed the repair process in the past (I think it was called Upgrade), but now that I have installed SP1, it won't work. I slipstreamed a DVD with SP1 according to the tutorial, but it still indicates that the existing version of Vista is newer than the one on the slipstreamed DVD and says that the upgrade functionality is disabled.
I noticed on the tutorial that you need a Retail version of Vista to slipstream with SP1. Is the OEM version different than the Retail version? Is that why I cannot do a Repair Install?
Having found out I need to remove SP1 before I can do a repair install, is it possible to slipstream SP1 with the recovery CD to create a new one in case I need or to do a repair install in the future
View 7 Replies View RelatedI restart it and it doesn't want to start up and it just keeps trying to repair the startup. This then stopped, for the next couple of days all it was doing was going past the BIOS then a black screen with a blinking cursor would appear and it would never boot. Im pretty much sure that it came with Vista preinstalled on it so I dont have a vista CD, I tried the recovery Cd.
Now everytime i restart it it gives me options for safe mode etc I have picked them all and it loads fr a bit then the screen goes to a page with text saying reinstall windows and the registry is corrupt. Info: Windows failed to load because the system registry file is missing, or corrupt. Now I cant get into any of the safe modes at all and I dont have a vista CD as it was preinstalled.
My Laptop is a Toshiba P200 satelite it came with a OEM Recory DVD is one of those DVD that you supose to run automatic and it then Wipe out everything and clean install it acording to Toshiba thats the best way of doing it.
But what if i just want to repair some System file I have a Corrupt Msdos when i acess it by running "Command" in start/run and Msdos open I can only navigate the drives by typing Cd c:/ cd... etc. But as soon i try to run something else lets say Type DIR in C:/ it Freezes as soon i press Enter (i see a cursor blinking up and down and dont let me do anything)
I am sure some Msdos files must be corrupted or missing and the solution is to restore those files repair vista. Do i realy have to Clean install Vista everytime because Toshiba havent included any repair disc only a Full clean installation DVD?......
Iv had my PC for around 4-5 years now and everything has always worked perfectly with windows home basic 32Bit, however yesterday i went to boot my PC up and it seemed to get to the stage where windows attemps to load up and it stayed on the same stage for 10mins or so, so i reset the PC and it came to a page saying something to do with look for problems and one saying cancel, I have tried the system repair a number of times but nothing seems to be happening :S Ive heard that a way of getting around the problem is to use the vista installation disc, is this correct?
View 6 Replies View RelatedI had to install a new Motherboard. The CPU, Hard drive and all the other
hardware are the same. Is there a way to get Vista working again without doing a totally new installation of Vista and all other programs?
I accidentally put vista into sleep mode. The video was all garbled and it was clear there was an issue. So, I hit the reset button on my tower to stop the mess. My next boot I got the error.
File: Boot/BCD
Status: 0x0000001
Info: An error occurred while attempting to read the boot configuration data. It says to put in the windows installation disk and "click repair your computer." The issue is when booting to the DVD, on the page with the moving green bar and it says Windows Vista under, it hangs. I even left it there for 2 hrs. The HDD LED on my computer is solid the whole time too. All my hard drives are SATA and they are in AHCI which is turned on in the BIOS. Perhaps changing the drives to IDE would help?
Anyways, Id like to get into that repair CD so I can fix my boot sector so I dont have to reformat. This has happened before and Ive had to reformat. Im sick of it, I dont want to reformat Vista again. Incase you didnt already know Im using Vista Ultimate x64.
a lot of the free partition managers get you to the point of "next time you boot you will get this error, just put in your Vista install CD and do a repair" yadda yadda. What about the millions that don't get a CD when they buy a PC? Got to be some way to fix the bootup stuff without restoring an entire image.
View 7 Replies View RelatedI have Vista Home Premium 32-bit, on Dell Inspiron 6400. After a repair install, I now have two problems: - Although there are 75 Windows Updates in the list, I have tried several times over the last two days to install these. So far, only a few are marked "Successful". The great majority are marked "Failed". - There is no SP1 available in the list of updates.
Here is the history:
- My laptop was pre-loaded with Vista (no SP1). The OEM DVD was also SP0.
- I installed SP1 when it became available.
- A few days ago, I neede to do a repair install. So I uninstalled SP1, and did a repair install as specified in Brink's tutorial:
Repair Install For Vista
- As far as I know, the repair completed successfully. There were no "Files discarded by Windows Upgrade" (Maybe this is important!). I was not asked for my product key, or asked to activate Vista.
- Immediately after the repair, I launched Windows Update, and found the two problems noted above.
BTW: To the best of my knowledge, my laptop is working fine. The minor glitches that prompted the repair install have disappeare.
I need to overwrite or remove but am unable to.
View 4 Replies View RelatedI have a Dell Inspirion E1505. 1.73ghz core duo, 2 gb Ram, 80gb hdd. I had been running Linux on my laptop. It ran fine. I decided to sell the laptop and realized I'd have to re-install the Vista OS that came with the computer. After a successful install and the downloading of all updates, including SP1, I noticed a problem when I attempted to change my power options. When I clicked on the drop down menu, it showed me all the options, I chose what I wanted and when it retracted, it went through every option and then settled on the one at the top of the list. It did this numerous times. I then clicked on set to default and that worked. I had downloaded spybot search and destroy and attempted to install it. When it came to the select language portion, it was on Afrikaans (top of the list), I attempted to change it to english and it would quickly rotate through all the languages and stop on Afrikaans, again, numerous times. I googled the problem to no avail. I then figured that one of the updates had a corrupted file or something and restored the syatem to the very first point, again to no avail. I then decided to do a repair install, that didn't work. I then decided to do a complete re-install, when I get to the set the time and date,I choose Eastern Standard Time and it then rotates through all the choices in seconds and stops at the very top one. I am Lost and could sure
View 4 Replies View RelatedI figured out how to run a sfc /scannow from the command prompt which showed corrupted system files which it could not repair. It created a = CBS log file which I also managed to open. After that, I am totally at = sea. I do not understand anything in the log file. How do I effect = repairs? Do I do a repair install? If I do, will it disengage the = programs that I have installed as XP does?.....
View 7 Replies View RelatedI am currently running vista home premium 32 bit. Every time I put my computer in sleep mode for the night, the next morning it goes right into the system repair on startup mode. After startup, I notice that a lot of my downloads and files from days before have been lost. I want to know if there's a way to solve this problem.
View 4 Replies View RelatedVista Home Prem x64 Raid 1 config, I had a failure of some sort that caused the system to fail to reboot. I booted the system from the Vista CD and performed a repair. Now, I am prompted to choose the Operating System in the in the Boot Manager. I now have 2 files, Windows Vista Home and Windows Vista (tm) Home Premium (recovered). If I choose the NON-recovered file the machine will not boot. If I choose the (recovered) file the machine boots and operates fine. I went to System maintenance and changed the default boot system to the (recovered) file. Now, when I reboot it still goes to the Boot Manager screen and waits a while before it finally boots to the (recovered) file. I would like to repair this machine to the way it used to work and not have the machine go thru the boot manager screen. I would also like to know how the (recovered) operating system got installed in the first place. How can I remove the defective one safely and return system to normal state?
View 4 Replies View RelatedI have a Kodak CX7330. On my XP machine, I am able to select only those pictures that I want to transfer, I cannot find such an option on the Vista system.
View 4 Replies View RelatedCouldn't really tell from the Repair Install tutorial, so which retail version of Vista do I need to purchase, so that I can perform a repair install, via "upgrade" of Vista? As I look at my OEM Home Premium disk, it has the options to install ALL versions of Vista, so does that mean I could buy the cheapest retail version, use it and perform a repair install of my OEM version, by simply selecting the correct OS as per your "Repair Install" tutorial, and then go from there?
Basically, I would like to have a "God" mode DVD, that allows me to a)perform a repair install of existing Vista installs, and/or b)perform a clean install, and to be able to do a) or b) simply by telling the installation process which version I have (Home Basic, Ultimate, etc.), and whether the copy is retail or OEM. I thought this is why Microsoft WENT to the DVD that would allow all installs, simply by selecting the right OS and OEM or Retail.
I installed a game that had the starforce driver as a requirement. Afterward my computer became unbootable as Vista x64 requires all signed drivers and this starforce driver wasn't. So following the advice of both Windows Vista's error message and some documentation online I did a Repair from the Vista DVD.
After the repair the computer booted but now my profile is severly messed up. I already had to reinstall my antivirus, firefox reverted back to a previous version and lost my profile. and now the buttons that link to my profiles folders (i.e. Documents, Pictures, etc...) on the start menu won't work at all............
Recently I bought a new laptop, a Sony Vaio VGN-NS11Z/S. But I've already bumped into some problems. It bought it with Vista 32bit (x86) preinstalled and today I tried to install Vista x64 which I got through Microsoft Bizspark. I simply downloaded the ISO and burnt it onto a DVD, everything seemt fine and I was prompted for my serial number which I entered and it started installing. All of a sudden the install encounters a problem and the installation terminates.
When I try to start my computer after this event Startup Repair pops up and after a while it says "Startup Repair cannot repair this computer automatically". Instead I'm left with a couple of options like restore from a system restore point, open Command prompt etc. None of the options does anything for me since I've been stupid and never made any restore points or backups of any kind. Is there any known fix to this problem or am I basically stuck with a 1000$ paper weight?
I'm having issues with various programs on my 32 bit Home Premium Vista OS. It seems like a virus to me. When I try and open EXPLORER the infamous CLASS NOT REGISTERED error shows up. For many other applications I get the "WININET.dll NOT FOUND" error. I have tried REGISTRY MECHANIC and also tried to do a STARTUP REPAIR using the VISTA DVD. The Startup Repair utility does not seem to find any problems when I run it at startup.
I wanted to get opinions if all this was leading to a clean install or a repair install of Vista. I'm not sure if I have SP1 or SP2. I can't seem to get to any program that would give me that info because of aforementioned errors.Also if it is a clean install that I need to do, can I save my documents and music somehow first? Any ideas? Is it possible to use DOS Command Shell and try the COPY command to copy these folders to my portable hard drive, which is L: drive on my computer. I do have a few programs that run without the errors. One is Mozilla Firefox. I can see all my important files by typing "C:" in the Firefox browser (for eg. "//c:/Users/admin/Music"). Any way to copy them to "L:"? Or any way to back them up before OS installation?
I'm running Vista Business x86 and thinking of upgrading my single core CPU to a dual core CPU. Will this be transparent to the operating system or will a repair be necessary?
View 9 Replies View RelatedA while ago on my desktop Vista I was installing some updates. After I restarted the computer, it went straight to startup repair. I used system restore to restore to a point before I installed the updates. My computer worked fine. Thinking it hadn't been the updates that had caused the problem, I updated again but with the same results. This has also happned on other computers of mine. Ever since then, I have never installed a single update. I am wondering if this is a good idea or not.
View 7 Replies View RelatedWhen I go to UserCP->Edit System Spec, I get a blank page. I've tried two different browsers. Is this broken, or just a problem with my profile?
View 5 Replies View RelatedRunning Vista 32 bit, have the normal start up repair loop going on details below
Problem Event Name: StartupRepairV2
Problem Signature 01: AutoFailover
Problem Signature 02: 6.0.6000.16386.6.0.6000.16386
Problem Signature 03: 6
Problem Signature 04: 2031645
Problem Signature 05: No boot failure
Problem Signature 06: CorruptFile
Problem Signature 07: 3221225624
Problem Signature 08: 3
Problem Signature 09: WrpRepair
Problem Signature 10: 10
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033
It won't start in safe mode & system restore (6 points) has not enough free space to restore the disk (I was backing up files into a folder to copy to an external drive filling the drive when it crashed - doh) & it says the Recovery X the disk is not in the selected restore point. Is there a way of copying files to enable the system resore to work or some other things to try.
I have done a clean install of Vista Ultimate (64), and since then, everytime I start my computer, it fails to boot correctly. It passes the BIOS page, starts the animated bar at the bottom of the page, and a few seconds later, the screen goes blank, and my VDU gives the messgae, "NO SIGNAL" After about a minute, the system reboots to the BIOS page again and continues up to the animated screen, and stops again. After it self boots for a second time, I get the SAFE MODE option screen. If I leave it on START WINDOWS NORMALLY, and leave it to complete the 30s count down, It boots again, and then completes the boot into Vista. If at the count down screen, I press enter, it goes into a boot loop that doesn't stop until I press the reset button on my box.? I have done a re-install twice and problem continues.
View 8 Replies View RelatedI could do a repair install, install new motherboard drivers and possibly have to validate all over again the same as you always did with XP but no good. I cannot get into Windows at all so cant run repair from WITHIN windows and no option from the boot DVD works. So, do you have to lose everything each time you upgrade hardware or some part of it dies meaning you are forced to upgrade hardware?
I installed from Vista Business pre SP1 and installed SP1 before the motherboard died.
yesterday i created a new vista dvd with vLite, because my windows folder was too big. after that i tried to do a "repair/upgrade install", like explained in this tutorial - Repair Install For Vista
as it turned out, it went completly wrong. i reinstalled vista on C: and the old version was moved to the folder Windows.old. obviously not that, what i want to accomplish. so now im online with a new user account - "lost" the user settings from my old user account, the programs are not "installed" anymore.
here is a small comparison of my situation:
- on C: i got now a new fresh windows and the old version in the folder in Windows.old
- Windows.old contains:
-- my old user settings
-- my old programms installed on C: (not a big deal, because i installed almost all programms on E: ---> other problem, see below)
-- the old windows folder himself
- as mentioned above i installed almost all programms on E: - obviously they are still there, but they are not "installed" anymore
so here are my key questions:
1. is there an easy was to transfer my old user settings to the new one?
2. is there an easy was to "install" all the programms on E:, without reinstall all per hand? eg. about registry import or something like that...
i hope it is clear, what my problems are - english is not my native language...
