My computer came with Vista Home Premium installed. I also received a disk marked:- "For distribution with a new Ev**** PC".(supplier's name). I recently had some problems. I booted from the disk. The only option I got was to install Vista. There was no option to "repair your computer" so I could not use startup repair or system restore. I had to reinstall Vista. Also there was no option to do a custom install. Do I not have the complete Vista Home Premium on my disk?
I would like to try a system repair but when I put my windows vista premium disk into the dvd player it only gives me the option to install and not repair. How do I go about getting the repair option?
I have a Dell Dimension E520, which won?t boot to Windows (Vista), and none of the repair options work:
Startup repair Reports repair fail due to problem with registry
System Restore Reports no restore points available
Windows Complete PC Restore Reports no backups available
Windows Memory Diagnostic Tool No memory problems
Command Prompt. Can?t think of any appropriate command to use here. So I booted with the system DVD (as one would with XP) but the upgrade option has been greyed out. I don?t want to do a clean install. I want to repair the existing installation.
My computer freezes from time to time and I think I tried everything to locate what the problem could be. The event logs show nothing, I ran a memory test with no problem, (I have 4Gb), I checked my drive and had no problems. All my drivers are up to date and I have all the latest updates/service packs. So my last hope is to re-install Vista. Are there any easy steps to re-install Vista? Or do I have to format my machine and start from scratch? I don't want to re-install office and so on.
I would like to re-install my version of Windows Vista Home Premuim, and i have the installation disc and everything, because my computer is so slow. I am making a back-up disc of everything i would want on the computer, including program files, Can i still install over my computer and the drivers for my modem and everything would be on the disc, or not?
I'm using Vista Home premium on an HP laptop. Yesterday the screen became stuck and unresponsive, I switched the computer off then on and after the normal repair / assessment of disk errors etc tried to log-on, the screen got to welcome with active cursor but got no further. I entered safe start-up to try to restore system to a point in time, but the Help system instructions to manually set up the restore point didn't correlate to any of the available options on the system, I'm not sure if an Windows automatic update has caused this.
When I R-click on my C:drive in Computer, I see an option labeled "Special Permissions", but it doesn't seem to be available. What are Special Permissions, and if they're important for anything, how do I enable them? Logging on as Administrator produces the same effect. Speaking as a user of Windows since its first release, I find Vista with its UAC, Permissions, and the need to repeatedly confirm every action I tak to be frustrating as hell.
Vista isn't booting on a friends laptop. I'm trying to fix it but have tried everything I can think of. See below
Startup Repair cannot repair automatically (lists the following details)
Problem signature: Problem Event Name: StartupRepairV2 Problem Signature 01: AutoFailover Problem Signature 02: 6.0.6001.18000.6.0.6001.18000 Problem Signature 03: 6 Problem Signature 04: 1310740 Problem Signature 05: 0xf4 Problem Signature 06: 0xf4 Problem Signature 07: 0 Problem Signature 08: 2 Problem Signature 09: WrpRepair Problem Signature 10: 267 OS Version: 6.0.6001.2.1.0.256.1 Local ID: 1033
each time I boot my Vista PC the system is very slow to establish a connection to the network. How do I go about troubleshooting this problem? I have a SOHO network config. One Vista PC, one W2K3 server on the network. Verizon supplied FIOS router gets me on the internet. The network runs great once it is connected. When I click diagnose and repair on the network icon the result is a "cant repair the problem" answer.
Before the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
Windows wont start and is asks for the installation disc to fix vista however, my PC did not come with an installation disc, just recovery options (which no longer appear). I've run windows start up repair and get the following message:
Startup repair cannot repair this computer automatically
Problem event name: Startup repair v2
Problem signature 01: External Media
Problem signature 02: 6.0.6000.16386.6.0.6000.16386
Hi, i am trying to use the startup repair function booting from my vista disc. I have set it in BIOS so that it boots from the cd/dvd drive first. I put the disc in and restart and when it comes up saying boot from cd/dvd press any key i do so. The problem is everytime i do that my pc just starts up normally and doesn't load the vista disc so i cannot get on the options and run startup repair.
I have an HP notebook with Vista Home Premium and after running SFC I have a few corrupted files.
Question is there a way to bring in the original files when the OEM didn't send an install DVD or will offer one at all?
All I have is the recovery partition with the option to "repair to original factory condition" which from what I gather means erasing all my settings and personal files.
I have made a recovery disc (from the partition) and I have the "Anytime Upgrade DVD," and I'm curious is there any way to access the upgrade DVD to get to those files or even do a real repair of Vista without losing settings and personal files?
I installed a new registry cleaner, RegCure I think, ran it, cleaned like 12k errors, more than I thought I should have, turned off my computer and went to bed. I come back and its acting like windows 2000!
None of the services are working, I can't access the backups I made, and I can't use the system restore because the host program wont respond, or something I ran safe mode and got SOME of the drivers working again, as I thought I would, so it sort of seems my computer has amnesia Does anyone know how I can get more services to work without reformatting my computer?
Hello, my son's pc crashed and will only boot to the black screen with green loading bar, then quits. Monitor keeps going to sleep.
I tried everything: system repair (which says it can't do - corrupt registry). Restore (can't - no restore point was set.) Go back to last known good config - won't work it crashes.
I ran a memory test and all was good.
So, I saw on this site where it was advised to do an upgrade/repair, but I can't because the option is grayed out and disabled. I tried starting with the disc in, and also by starting and then putting the disk in. If I wait until the machine starts and put the disk in, it will not work. It crashes. If I put the disk in and then start the machine is when I get to the install screen and eventually the 'update is disabled' screen.
I'm really trying to avoid a new install. I wonder if there is a way to get around the disabled thing in my case?
I have a Hp Pavilion notebook with Vista Home Premium. The PC boots fine, but when I log in to the user account with the password the screen turns all white.
I also tried in safe mode and in safe mode as soon as I put in the password in the screen turns all black. It says "safe mode" in the corners and the top of the screen says:
"Microsoft® Windows® (Build 6001:Service Pack1)" You can move the mouse pointer around but there is nothing to click on and the screen remains black.
I came across this forum and I followed the instructions in the tutorials on fixing Vista.
First I tried How to Do a Startup Repair in Vista and it said it was unsuccessful.
Next, I followed the directions from "How to Do a System Restore in Vista" and it said " no restore point have been created on this computer's system disk"
Now I am trying "How To Perform a Repair Installation For Vista"
but when I get to "step 10. Click on the Upgrade option" the upgrade option is greyed out.
Why am I not given the "upgrade option" and what should I do now?
In wanting to do a repair install (keeping existing programs etc), on running Recovery CD, I get the message.
"Upgrade has been disabled vand cannot be started. To upgrade, cancel the installation and then choose to upgrade to a version of windows that is more recent than the versiopn you are currently running"
I'm running Vista Home Premium (fully updated) but suspecting that I may have a problem, I thought I could do a repair install but it seems all I can do is either a clean install and thus lose everything or upgrade to I assume Business or Ultimate Editions of Vista. Why can't I do a repair install from Vista Recovery CD?
I originally sought help for a problem with a hotfix, KB978251, which my machine would not accept. Over in the Updates thread, here, kb978251 cannot install: why? Flavius was gracious enough to respond. After running the diagnostics and posting the results he'd requested, the end result seems to be that my installation of Vista is corrupted.
His advice was to reinstall vista or upgrade to Windows 7. I am loathe to accept either course of action. The reinstall directions by Brink, here, Repair Install For Vista states explicity,
IF YOU HAVE THE VISTA SP2 INSTALLED: This will not work if you have SP1 and SP2 installed unless your Vista installation DVD includes SP2. I, of course, have SP2 installed. My Vista installation DVD did NOT include SP2; I patched my install to SP1, then later, to SP2.
To confirm, is it impossible to repair Vista if SP2 is installed and my DVD did NOT contain SP2?
Without reformatting my computer and starting from scratch, a course of action which seems quite drastic and perhaps not what Microsoft designed their OS to be known for, how can I repair my Vista installation?
My sfc files are attached. My understanding is that I have a lot of corrupt files. I am willing to replace them, but I need more information to interpret the results of the sfc output.
I have been trying for ever to do an upgrade install, vista home premium 64 over vista home premium 64 to solve some WU problems but haven’t had any luck. I have no service packs installed, and are trying to upgrade from a non service pack vista disk. It seems to skip asking me if I want to upgrade at all. It goes like this
Insert vista DVD Click install now Product key screen (i don't put it in right now) Choose version (home premium 64) Agree to license >>This is where it gets different<< It asks to select partition (I dual boot xp)
After I choose the partition that contains my vista installation it gives me a warning that files may already be there and they will be moved to windows.old I went ahead and agreed once and it went to the screen that said copying files 0%... at which point I clicked cancel. I was afraid to leave it to see if it would..............
I'm currently having a problem with my bosses PC. It will not boot into Vista. I have booted into safe mode and tried to rool it back to a restore point. This has not helped. I have also tried using Startup Repair on the Vista DVD which fails.....
Is there a process by which I can reinstall Vista Ultimate so that it repairs an existing install? Perhaps foolishly, I installed SP1 RC. Initially it ran well. A week (or two?) my hard disk is trashing constantly (like background defrag) and everything's slow as molasses. That includes web screen flips, file reads, email, etc. I suspect it's SP1 RC but am not certain, as I've installed other software since, that being HP Solution Center for my wireless AIO printer. I uninstalled SP1 RC but nothing improved. If I can refresh or repair the existing Vista Ultimate, I'd like to try. I've been unable to determine if there are other problems. My alternative is a full rebuild and reinstall, which I'd really rather not do.
I'm wanting to put my computer in hibernate and I click on the start menue but the option is no longer there. I have the option to sleep, shut down, lock and so on but no longer have hibernate. Whats up with that ? Does anyone have a clue?
I have tried to format my computer, first I tried by just inserting the disc, no luck, then I tried booting it from the disc, no luck then I tried going into computer management right clicking my c drive but the format option is no available. I have evn tried phoneing Microsoft but they want $80.00. Finally I thought I would format it by using my XP disc, installing XP and then upgrading to put vista back on the system but it won't let me do that either.
1 - I disabled UAC option. 2 - Crap starts happening right after. what crap? Some programs such as tuneup utillites,psp video converter cannot work. Programs that can speed up the system such as programs (that disable some programs to start during pc startup) CRASH now. 3 - Decides to turn on the UAC on again. THEN??when try to turn it on under windows security center,it says " dont have permission to perfrom action,pls contact administrator" (simpified msg)tried ticking it under user account option,keeps unticking again2. tried do registry method using regedit, cannot also. that leads me to create admin account to turn on UAC. So i follow this command in cmd prompt(RIGHT CLICK AND RUN AS ADMIN YEAH I KNOW)
When you right click on a program you get the box that opens giving you all kinds of options; run as administrator, scan with, etc. What do you call that box? I am running Vista, but a friend is running XP. She used to have listed in that box the option to scan with her anti virus program, but she no longer does. Is there a way, in XP, to add this to that box?
When I reboot my computer through Windows the computer shuts down correctly, but then the monitor remains black and the bios starts beeping out the error code for "VGA not detected". Why would this be? I am forced to press the power button and wait from 5 to 10 minutes to reboot normally. (I'm using Windows Vista Ultimate x64, have an ASUS P6T Deluxe motherboard and a Gigabyte Geforce GTX 280. 800 watts ZION power supply) Is this a BIOS settings or GPU problem? I already reseated the GPU. Could it be a power supply failure?
