Vista Update Failed
Aug 20, 2009
I'm running Vista Service Pack 1 on a Fujitsu Tablet PC (T4220). For several days, I've been unable to install the Vista Security Update KB971657. The update downloads, my machine reboots, and then an error message comes up "Updates not configured correctly." The machine shuts down, reboots, and then gives the message "reverting changes." When I go to Windows Update in the Control Panel, I see that the update failed, but no error code appears. So far I have:
1. Disabled my antivirus program (Kaspersky), and tried to download and install again, but no luck.
2. Done a clean boot by changing the settings in the System Configuration Utility, rebooted, and tried to download and install again, with no luck. In reading through this section of the forum, I see at least one case in which an update wouldn’t install because the user has Service Pack 1 but should have SP2. Should I try downloading SP2 and see if this resolves the problem? Though I’m curious why Microsoft hasn’t installed SP2 automatically on this machine since my settings are for automatic installation of updates.
View 2 Replies
ADVERTISEMENT
May 26, 2009
I have installed Microsoft Office 2007 SP2 from windows update...but i have a question....How can i delete this ''failed message'..not updates..only 'fail message'' from update history..look at this
View 4 Replies
View Related
Oct 13, 2008
when going to the windows update window,i get a white blank page and it says "the page failed to load"i did restart, same issue.
what is it all about?
and another thing, i don't have a Floppy drive in my computer however a Floppy A: drive is present in "Computer" how can i remove it from the list?
View 9 Replies
View Related
Apr 10, 2008
I've been trying to process the following updates to Vista and each time I try to do so, the updates failed: "Update for Windows Vista (KB938371)" Failed 4/10/08 "Cumulative Security Update for Internet Explorer 7 in Windows Vista (KB47864)" Failed 4/9/08.
View 4 Replies
View Related
May 19, 2008
I have windows vista home premium...Security Update for Microsoft. NET Framework, Version 1.1 Service Pack (KB929729)will download, but not install....Rec'ved error codes 80246005 and 643. It downloads over and over for months.....any connection to AOL or Trend Pc-Cillin?...I'm technically challenged, so please reply in step by step solution, if you have one.
View 9 Replies
View Related
May 21, 2008
I have attempted many times and failed to install a security update for Microsoft.NetFramework,version 1.1 service pack 1 (KB29729). I receive a failed to install with a Code 66A. I have tried to find an explanation for the code to no avail. This is listed as an important update for vista but I am stumped as to why it won't install.
View 7 Replies
View Related
Nov 15, 2009
sp2 update started this way .so far ive deleted pending.xml file/installed new updater/run chkdsk/downloaded and installed sp2 standalone. nothing seems to work. i have an hp dv9000 laptop with sp1 installed and its set for micro auto updates. ive been trying for about 4 days now to get it to work. i also have avast anti virus installed.now i get update failed without the error code but tells me to the system readiness tool wich i did that too.
View 8 Replies
View Related
Oct 4, 2009
Vista Home Basic SP2. When I try to run Windows update all I get is a blank page that says "The page failed to load". I've looked all around and have found a lot of people with the same or a similar problem but no firm solutions. I haven't used it in maybe a week and it's worked fine up till now. There have been no real changes since I used it last. Does anyone have a clue?
View 4 Replies
View Related
Feb 8, 2009
I have a factory install version of trend microcillin, if I unistall it how do I get it back if that is not the problem with the opening of attachements. As others have said I have been using it for over a year and had no problems until I updated vista lately
View 9 Replies
View Related
Nov 23, 2009
My Dell Inspiron 1520 laptop with Windows Vista Home Premium has failed to load the subject update on 20 different occasions since 13Nov09. The "Error Details" is Code 80073712, which is nothing more than a general error code with no specific fixes recommended.
View 7 Replies
View Related
Dec 12, 2009
After an automatic update from Windows failed to finish and computer shut down... I did a manual update but now the Photo Gallery says my picture files are corrupt. AND my system restore point ONLY shows today... no previous dates to restore to.
View 4 Replies
View Related
Apr 2, 2009
A few days ago, Windows Update Automatic updates installed an update on my computer called:
Windows Search 4.0 for Windows Vista (KB940157)
When I restarted my computer after this update I tried to log on and got this message:
The user profile service has failed the logon. User profile cannot be loaded.
I fixed this by booting into the F8 restore options on my Dell Laptop and used system restore to repair the problem
Today Windows Update Installed that same update again and the same problem arose which I again fixed with system restore.
Does anyone have any thoughts on this, like why should this update be causing my User Profile not to load?
Windows Vista Home Premium 32bit
View 6 Replies
View Related
May 29, 2009
When i installed IE 8 as part of a Windows update I now have a problem opening pictures and other attachments in Winmail. I note that everyone appears to be having a problem with this update. If it does not work, it needs to be removed from the updates for Windows Vista. Vista is enough of a pain without adding to it.
View 9 Replies
View Related
Jun 19, 2008
I want to update some of the hardware in my computer and my friend said that if you get OEM Vista you are not alound to update your hardware unless you buy another copy of vista... and that sounds insane
View 9 Replies
View Related
Apr 11, 2007
I am trying to update the bios on my computer but I am running into problems when booting from a usb flash drive. I get the error: "Windows failed to start. A recent hardware or software change might be the cause. The boot selection failed because a required device is inaccessible."
I have been going about this process following instructions found here: Solution for Updating the BIOS on Windows Vista x64 Machines (VistaJuice)
View 5 Replies
View Related
May 26, 2008
taken from computer with failed motherboard- will not work in Vista home premium. It is recognised in drive list but will not open.Enclosure supplier stated that Vista will not recognise as it was FAT 32.
View 7 Replies
View Related
Mar 26, 2008
I rebuilt my home PC yesterday. I had a 40GB HDD on which I had Vista Premium and my Applications. THIS WAS running out of space. I had a 30 GB hard disk on which I had all my docs....plenty of space on this. I removed the 40GB disc, installed a new 320GB disc (along with a new video card, power supply, RAM and DVD burner) and rebooted using F1 command, from DVD, and installed OEM Vista Ultimate which computer shop sold me as best (read: cheapest) way to go to Ultimate - especially as I was rebuilding so much of my PC...IS THAT RIGHT? . All went fine.......BUT I failed to notice until after activating Vista that I had installed it on the second HDD (the small 30 GB one 'left over' from my original PC configuration!!!!!...
View 7 Replies
View Related
Mar 23, 2008
Unable to complete install SP1, and gets code 0x80004005. It seems to have to do with some kind of registration. I have a Windows Update that works fine so it seems strange. The only thing that changed (as I know of) is that now I have in the corner of my lower right screen, a new message showing: Windows Vista (TM) Evaluation copy. Build 6000 - I could have taken that if the install was a success.
View 4 Replies
View Related
Aug 6, 2008
I am having is I cannot acess my laptop with windows sharing/networking.I am trying to share files and printers between my Dexktop PC and my Laptop.My desktop PC is connect to a router with DNS by cable and the laptop is connected by Wi-Fi.Both computers belong to the same workgroup(WORKGROUP).Both computers have password protected public folder and printer sharing,file sharing,network discovery,and password protected sharing enabled. Both computers do have shared files and printers.What's happening is from the laptop the desktop(RK-PC)appears and I can share files and printers flawlessly and very quickly.However from the desktop while the laptop (RYANK-MOBILE) appears it cannot be accessed at all.Also the desktop is vista 64 bit and the laptop is vista business.I saw another thread with the same problem but the response pointed to a tome of an article that explained every single facet of windows sharing down to the way the packets are constructed.To be honest I don't have time to read 100 pages on windows sharing and there is no way the problem is the complicated.None of the suggestions I read in the first five pages or so helped at all any ways.I tried changing netBIOS from default to disabled on both PCs but after doing this the result was normal function on the laptop as before but the desktop could no longer even see/discover the laptop on the network.
View 4 Replies
View Related
May 13, 2010
I am trying to logon to my computer and am getting The User Profile Service failed the logon message for both my Lucy and Lucy Administrator profiles. I have looked on here to find a solution and have tried to do a system restore but it tells me that there are no settings to restore to ?? Most other messages just dont make sense as Im not great at dealing with computers when they go wrong! I would be really grateful if anyone knows how I can sort this out. The only thing I can do is log into Safe Mode and I have no idea where to go from here!
View 2 Replies
View Related
Oct 6, 2009
last night before bed I clicked shutdown and install updates in Vista. I woke up this morning and my computer will not turn on. It leads me to this: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and then click "next"
3. Click "repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assisance.
File: BootBCD
Status: 0xc000000f
Info: An error occured while attempting to read the boot configuration data.
problem I have is that I do not have vista installation dvd. I am currently studying abroad in Rome and will take more time than I have to receive the dvd in the mail. None of my friends here have one either, but they all have the same make and model computer that I do. Is it possible for one of them create a installation dvd that I could use? Or could they make a recovery disc that could as least get me to the system recovery options screen?
View 7 Replies
View Related
Jun 14, 2008
Running Windows Vista Home Premium SP1 on HP Pavilion TX 1250ee laptop. I have a problem logging into Windows Vista. I get the screen up which allow me to select my account and enter a password. Then I get a welcome message. Trouple is it goes no further. The Screen went black with only a white cursor showing. Seconds later, an error showed up saying failed to set data for 'Shell' I've left it for few hours but nothing changed. I did some troubleshooting like testing the Hard Disk using the Built in Self Test in BIOS and everything was pass. I tried to login through safe mode and fortunatlly it's ok. but I don't exactlly know what's the problem? Before it did happen I was creating CD recovery for my computer using the Recovery Manager. Also, there was some updates from Windows which I think what cause the problem. I'm still troubleshooting and waiting for any respond from you guys.
View 9 Replies
View Related
Mar 23, 2008
vista sp1 came through on windows update. It is on my computer but wont install! becuase it wont install i cant uninstall it? My problem is that my dual cores are running at 100% half of the time. how to get rid before my processors burn out
View 9 Replies
View Related
Nov 1, 2009
I installed the vista 64 system updates. I found that this caused my system update to fail. upon using these forums I found that others with this issue, could not get this to be fixed, without reinstalling/repairing of the operating system..
what I found was microsoft office SP2 was the cause of the problem..the trusted installer was missing in the windows servicing folder....
View 0 Replies
View Related
Jun 6, 2008
Is there a way to update DX10 in vista?
View 8 Replies
View Related
Dec 2, 2007
I have Windows Vista X64 Ultimate and every time i want to format my hard drive and reinstall Vista, i need to remove 2 gigs of RAM, since i get a blue screen during the installation of Vista because i have 4 gigs of RAM. So i need to then get this update "Windows6.0-KB929777-v2-x64.msu". My question is.....is there anyway to integrate this update into a back up copy of my Vista disc?. It's abit anoying to keep removing 2 gigs every time i want to install Vista.
View 6 Replies
View Related
Feb 6, 2009
about 2 weeks ago or so my computer has been having these little spikes in "Warcraft 3" like every second its really annoying and hard to game with i dont know if its just a Vista issue or like a update idk im using wireless net and i have a perfect connection.
View 4 Replies
View Related
Mar 23, 2008
When I checked Windows Update today, 2nd Tuesday of March, I found only one new Vista update (.5 MB) which actually has a date of Feb 12th. I thought SP1 would be available today for the "first wave (English)" version. I'm using Ultimate installed by the manufacturer and have kept it up to date (except for hiding unneeded updates like the foreign language stuff and the test for counterfeit versions). Microsoft has a web page listing the SP1 roll-up files which also says that the service pack will contain additional files not in the list: "This document contains a list of these updates with links to their descriptive web pages on. There are other updates in Windows Vista SP1 which have not be released as updates and therefore are not presented in this list."
View 4 Replies
View Related
Feb 4, 2009
Will the Internet Explorer 8 browser be like a normal update for Vista users? Or will it have to be downloaded/installed separately?
View 4 Replies
View Related
Mar 16, 2009
I installed the SP1 update which stopped my system from working resulting in an error "DXC0000034!! 250/69843". Seems a number of people have been a victim of this. To get round this I could not restore to a point earlier than when I updated Vista therefore I have installed vista again over the old version! This allows me to access Vista but I now cannot install programs such as Windows Live, iTunes or update Vista (get a 8007000B error).
View 2 Replies
View Related
Mar 26, 2009
My laptop, Toshiba model M305D, has been down about 6 days. I went to microsoft technical, put in a request but got no reply. This is the first problem I've had since buying the laptop new August, 2008. It has an AMD 64 bit processor and runs Vista home premium 64 bit. It has been kept up-to-date with windows update.
THE PROBLEM: The last time it was receiving updates it became stuck in a loop. It was processing update stage 3 of 3 at the 96% complete point when it restarted the computer to complete installation. Only, it keeps restarting and going through this update install process. It does this over and over.
I used the F8 on startup method to get to a help screen hoping to get into the safe mode. I got to the help screen.
The computer will not go into the "safe mode" using any of the choices presented on this screen, but instead goes right back to update screens described above when one of the choices is selected. I had hoped to get access to restore but could not.
How can I get past this to get back up and running?
View 5 Replies
View Related