Error '372' Failed To Load Control 'MMControl' From Mci32.ocs
Feb 6, 2009
I play a PBE game called VGAPlanets-4 (VGAP4) and an excellent programmer has been making updates, changes, fixes etc... to the original code which was compiled with VB5 I belive. The new code is being written with VB6. The problem is that in order to take benifit of all the new whistles and bells of the new code I need to put a version of "mci32.ocx" into the Windows/System32 directory. I do so and get an error:
"Run-time error '372': Failed to load control 'MMControl' from mci32.ocs. Your version of mci32.ocx may be outdated. Make sure you are using the version of the control that was provieded with your application." I've tried to use regsvr32 to register the ocx but no luck. I've tried multiple versions of the file, no luck. It worked under XP SP3 after using regsvr32.............
Ever since installing 178.24 driver Ive not been able to load the nvidia control panel. It just says this program has stopped working. Ive tried uninstalling it and installing it again and also trying same with the beta 180 driver.
After months of working fine, suddenly received the following messages: The connection to the server has failed. Subject 'Balance due on account', Account: 'Windows Mail', Server: 'mail.charter.net', Protocol: SMTP, Port: 25, Secure(SSL): Yes, Socket Error: 10061, Error Number: 0x800CCC0E
The connection to the server has failed. Account: 'Windows Mail', Server: 'mail.charter.net', Protocol: POP3, Port: 995, Secure(SSL): Yes, Socket Error: 10060, Error Number: 0x800CCC0E
I had no problems yesterday or ever before. Apparently there was an update last night, and since then my desktop won't start up. It gives me the error saying windowssystem32driversfltmgr.sys will not load. I did a system restore to the system checkpoint before that update last night - to no avail though. I've done the automatic startup checker twice using the vista installation disk, it says there aren't any problems. is there anyway to just replace this fltmgr.sys from another vista machine? won't boot to safe mode, same error. last known good configuration doesn't work.
Boot Manager Failed to load - ntoskrnl.exe. brand new to the forums but have been here for the past two days trying everything I can find to try and get my Vista Ultimate machine working again. I shut the computer off the other night before work, came home in the morning and rebooted... and upon loading got a black screen "Windows Boot Manager" coming up asking/telling me to "Repair" the computer. File: Windowssystem32 toskrnl.exe Status: 0xc000098. Info: Windows failed to load because the kernal is missing, or corrupt
I installed my vista disc and went through the repair... nada. I then tried a restore... nada... and now am at a loss. Is there a way to copy the file via the Command Prompt to the Vista drive from the dvd? Is it that simple (ha... I know... it never is)?
windowssystem32driversmsisadrv.sys. Is the file that is corrupt. I have read other fixes for this problem, MY problem is that I can't boot windows, it just keeps going to that black menu asking which way I want to boot.
Several days ago there was a large number of updates available to download. I allowed the system to update all of them. Three, KB974234, KB972581 and KB973709 it was shown on the update history page as failing to download. Reading as to a possible solution, I tried to load them manually, saving those files to my desktop, right clicking on each, to run as an administrator. After each loaded I got a message telling me they were already installed on my system. My question is why does the "failure" notice remain on my history page and how can I delete those three file entries?
Vista Home Basic SP2. When I try to run Windows update all I get is a blank page that says "The page failed to load". I've looked all around and have found a lot of people with the same or a similar problem but no firm solutions. I haven't used it in maybe a week and it's worked fine up till now. There have been no real changes since I used it last. Does anyone have a clue?
I have the Home Premium edition and recently I received the following error:
File: WindowsSystem32tkrnlpa.exe
Status: 0xc0000001
Info: Windows Failed To Load Because The Kernel Is Missing, Or Corrupt
It tells me to insert my installation disc and restart your computer however when I do that I go right back to the previous screen which I just described. I already changed the boot order to boot from the DVD drive first however it continues to skip this screen and keeps looping to the same screen. Does anyone know another way to load my disc so I can continue with the repair?.
I built a new system, installing Vista Business 64bit to take full advantage of DX10 and large amounts of memory. Not having many games lying around, I decided to download steam and install Half Life 2. If you are reading this, and using a 64bit edition of windows, then my guess is you are having problems with Half Life 2. I encountered two problems, and after a few hours was able to solve both of them.
GAME HANGS ON INITIAL LOAD (BLURRY IMAGE SCREEN) "64-bit" message was at top of screen game never loaded Potential cause: It seems that while steam intended HL2 to have a 64bit edition, with an update along the line (maybe with the release of Left4Dead according to others) the support was broken and the game doesn't load.
Fix:Unfortunately, the fix removes the 64bit potential. In steam, right click half life 2, and select. From the dialogue box, click Enter "-32bit" and select This got HL2 to load, where upon playing I encountered problem number 2.GAMEPLAY CAUSES FULL SYSTEM HANG- Symptoms: After playing for less than 5 minutes, the game would crash and the three fingered salute (ctrl+alt+del) couldn't get me out of it......................
I have a Dell PC running Vista 32 and wanted to upgrade to Win 7 and am just finding out I cant delete software from my PC because I aperently dont have permission. Anyway, We need to uninstall some software from the control panel and we keep getting and error:Code: The system administrator has set policy's that prevent this installation. How do I get admin right to uninstall/install software?
Has anyone else experienced problems with Control Panel? Each time I click on Control Panel, I get an error and Windows tells me that Explorer has to restart (and it does).
I use Vista 32 Ultimate and I have this problem during the startup of Windows: The UAC control stops 2 programs and I'm not able to let these programs load with UAC control active. Tried everything also in Windows defender but no success. I must always confirm and let run these programs clicking on the UAC block tray icon that appear during the load of these 2 programs. Someone tell me that these programs blocked by UAC must be updated from the developers to pass the UAC.
In my 64-bit installation, the print spooler server suddenly stopped running (and will not restart). I've tried cleaning out registry keys (HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPrint), deleting the files out of Windows (C:WindowsSystem32spool) to no avail. The system log contains many of these:Error Service Control Manager Eventlog Provider7034None The application log contains these:WarningSpoolerSpoolss1035NoneThe print spooler failed to load print provider localspl.dll. This can occur because of system instability or a lack of system resources.ErrorSpoolerSpoolss1027None The system failed to initialize the local print provider: Error 0. This can occur because of system instability or a lack of system resources.
when i turn on my computer, an error message comes saying "Windows failed to load because a file is missing or corrupt File: Netio.sys Status: 0xc0000221" This started when i was clearing my computer of useless programs, and after i deleted Realtime player or Quicktime player, (can't remember which) an error message jumped from the taskbar saying something about Network device driver. After that every time i start the computer, the "Windows failed to load" message pops up. The first half a year, it was solved by pressing enter, to "Choose an operating system to start: Windows Vista" and then to "Windows error recovery (start windows normally, safe mode etc)" and back to "Windows failed to start", repeating it 3-20 times. Then i had a familiar "Unexpected shutdown" during a game, and now, the "Enter spamming technique" doesn't work anymore. All i can access at the moment is Windows memory diagnostic tool, and Bios setup utility. Is there any way to fix this through the setup utility or some other manner?
When I try to go to the windows update page, it always says "page failed to load." I want to disable the updates because there is a particular one that is installing and messing w/ my mouse!
Something seems to be amiss in my Vista install and I am having problem install some things. Whilst working through some KB articles I was instructed to "Regsvr32 wbemupgd.dll". The result is a red X and the following message: The module "wbemupgd.dll" failed to load. Make sure the binary is stored at the specified path or debug to check for problems with the binary. So I searched my hard drive and it seems that "wbemupgd.dll" has gone missing. Any idea where I could get this .dll and why it might have gone missing?
when i click start button and right click into computer for properties., then. i was shcoked because nothing appears. and it displays "The page failed to load".
I have been in a long process with HP to resolve a HP Photosmart C6250 printer in Vista Business. After a month of email support from HP I was told they had exhausted their resources and to call for telephone support. After several hours over two or three days, the tech (island of Cebu, Philipine Islands) identified a failure.In the software installation process, regsvr32 calls for a vbscript.dll. An Error Message results: "The module "vbscript.dll" was loaded but the call to DllRegisterServer failed with error code 0x80004005". His solution was to reformat and re-install Vista, etc.This seems somewhat similar to other printer istallation problems I noticed in searching previous forum entries.
Here is a copy of the error message I get: The connection to the server has failed. Subject 'test', Account: 'mail.comcast.net', Server: 'mail.comcast.net', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
I have never been able to send but receiving is no problem. I have tried the authentication steps suggested in "Help" and on other postings here.
My Dell Inspiron 1520 laptop with Windows Vista Home Premium has failed to load the subject update on 20 different occasions since 13Nov09. The "Error Details" is Code 80073712, which is nothing more than a general error code with no specific fixes recommended.
When I start windows home premium on a new pc for the first time should i get an option to choose the installation language? I bought a pc in germany and the start up failed i got an error message in an endless loop i got it to start with the recovery disc but that has set it to German and i cant change it.
I just downloaded a bunch of application and did a lot of work on my computer. I do however, have samantic endpoint virus protection and did a couple of scans with no problems. When i try to open windows defender i am getting an error that says. Application failed to initialize: 0 x 800106ba. A problem caused this program's service to stop. To start the service restart your computer or search Help and Support for how to start a service manually. I restarted and tried to open it but got the same error.
Vista 64 Home Premium. Woke to find my computer had rebooted itself during the night and Windows failed to restart. Didn't catch the error code, but the message said if Windows won't restart, insert startup disc and do a repair. That is what I ended up doing as Windows simply wouldn't start up. Anyway, repair worked but my desktop looks like from a week ago. The desktop icons for Thunderbird and a couple of other recently installed programs are no longer there. Their program folders, however, are still in the Program Files folder but with no .exe file. Is there a way to repair the programs so that they are in sync with my current windows install?
This is a new machine recently purchased from a popular online vendor. They installed Vista. I've only had it two weeks and have kept it in pristine condition and it has been working fine....until now. I think Vista tanked overnight during an update. I'm new to Vista, has this happened to others?
Running Windows Vista Home Premium SP1 on HP Pavilion TX 1250ee laptop. I have a problem logging into Windows Vista. I get the screen up which allow me to select my account and enter a password. Then I get a welcome message. Trouple is it goes no further. The Screen went black with only a white cursor showing. Seconds later, an error showed up saying failed to set data for 'Shell' I've left it for few hours but nothing changed. I did some troubleshooting like testing the Hard Disk using the Built in Self Test in BIOS and everything was pass. I tried to login through safe mode and fortunatlly it's ok. but I don't exactlly know what's the problem? Before it did happen I was creating CD recovery for my computer using the Recovery Manager. Also, there was some updates from Windows which I think what cause the problem. I'm still troubleshooting and waiting for any respond from you guys.
i have been using windows e-mail forever, since the 6/22 i have not been able to send or receive. i get error message stating: connection to server failed account, 'pop.charter.net' , server:pop.charter.net" protocol; pop3, port 995, secure (ssl): yes, socket error.10060, error number: oxooocc03 i have been reading other questions and answers and have tried most, downloaded regcure, nothing has worked.
As of today I can no longer open attachments. I have already unchecked the box that won't allow certain attachments and that didn't work. If I right click on the mail and double click on the attachment I get the message, "command failed to execute". I used to be able to single left click on an attachment to open but that does nothing now, just sits there without even an error message. The only thing I've done differently is take an update that they said I needed in order to make my screen saver work. I did that days ago though, and that shouldn't have affected my mail.
This message kept coming up after I turned my computer on. What does this mean and what do I need to do to fix this?? "Application failed to initialize 0x80016ba." A problem caused this program's service to stop. To start the service, restart your computer or search Help and Support for how to start a service manually."
hoping some of you technical wizards can help me on this! Right i have Vista 32bit running on my Acer, Had it about 1 year now. Every so often it performs crash dumps ( a little more often then it should do actually) Last friday night it did a crash dump, then when restarting it just wouldnt....It kept showing a blank screen for about 30 minutes. then it would go to Windows Start-up repair, and just go on and on for about another 30 minutes, then tell me it couldnt find anything wrong.
I tried Loading in safe mode, with command prompt and networking help but it judt did exactly the same. I ran the memory diagnostic and found no problems. So then i restored the system to before a Windows update on the same day this all happened. Exactly the same kept happening, Some times i would get as far as logging on after about an hour of waiting. It would Log on and then just freeze. I restored to a few days before last friday and tried again, exactly the same kept happening. Then this morning it got to the log on screen. i tried logging on and it said something along the lines of 'Windows has failed to Activate. error code0x80070426' I havent got any back-ups on disk (stupid i know, i was actually going to do one before this happened) I havent got the operating system disk as the computer came pre-installed with Vista and had no Disk. I know i could probably restore the system to factory setting somehow, but i dont want to lose verything on there! There must be something i can do.
My daughter suddenly experiences: Windows Defender: "Error Code 0x800106ba Application failed to initialize" This is a fairly new machine (running Vista Home Premium) and it was delivered with McAfee virus protection installed. The initial McAfee license is about to expire so she renewed that license for a permanent licence today. There may of course be a connection here, but I fail to see what that connection could be.
She was guided to http://support.microsoft.com/kb/931849 which suggests to initially remove (uninstall) Windows Defender and then reinstall it. The only problem with this is that Windows Defender is not included in the list of installed programs that can be uninstalled, and when she tries to "reinstall" it Windows Defender is reported as already present on the system. I checked on my own system where Windows Defender is running without any problem, and the same applies here: Windows Defender is not listed among installed programs.
