Windows Failed To Load Because The Kernel Is Missing, Or Corrupt
Apr 19, 2009
I have the Home Premium edition and recently I received the following error:
File: WindowsSystem32tkrnlpa.exe
Status: 0xc0000001
Info: Windows Failed To Load Because The Kernel Is Missing, Or Corrupt
It tells me to insert my installation disc and restart your computer however when I do that I go right back to the previous screen which I just described. I already changed the boot order to boot from the DVD drive first however it continues to skip this screen and keeps looping to the same screen. Does anyone know another way to load my disc so I can continue with the repair?.
when i turn on my computer, an error message comes saying "Windows failed to load because a file is missing or corrupt File: Netio.sys Status: 0xc0000221" This started when i was clearing my computer of useless programs, and after i deleted Realtime player or Quicktime player, (can't remember which) an error message jumped from the taskbar saying something about Network device driver. After that every time i start the computer, the "Windows failed to load" message pops up. The first half a year, it was solved by pressing enter, to "Choose an operating system to start: Windows Vista" and then to "Windows error recovery (start windows normally, safe mode etc)" and back to "Windows failed to start", repeating it 3-20 times. Then i had a familiar "Unexpected shutdown" during a game, and now, the "Enter spamming technique" doesn't work anymore. All i can access at the moment is Windows memory diagnostic tool, and Bios setup utility. Is there any way to fix this through the setup utility or some other manner?
I really need some ideas to fix my computer. When i turn computer on i get windows failed to load because the kernel is missing or corrupt, so ive put in my restore discs, and no luck there also. Been working on it for 5 days now and no luck. will not load in any of the safemodes.
windowssystem32driversmsisadrv.sys. Is the file that is corrupt. I have read other fixes for this problem, MY problem is that I can't boot windows, it just keeps going to that black menu asking which way I want to boot.
I have been having serious difficulty getting my laptop to start in the last few months but have usually been able to solve the problems for a while until they come back but now I am faced with a new boot issue that I cannot fix.
When I turn on the laptop, after about 5 minutes I get the message "windows failed to start because the system registry file is missing or corrupt" and gives this location windowssystem32configsystem and also status: oxc000000f. I am instructed to boot from the vista dvd and repair windows, startup problems or whatever but when I try this I get the exact same message described above.
I have had a lot of startup problems recently but they have always been solved either by booting from the dvd and reparing startup problems, or more commonly, by running the chkdisk which would generally have my laptop running well for a week or so before new problems occurred. I've searched the web but people keep suggesting booting from the vista dvd which as I said isnt working. No matter what I try I get the same message, safe mode etc will also not work.
Vista Home Basic SP2. When I try to run Windows update all I get is a blank page that says "The page failed to load". I've looked all around and have found a lot of people with the same or a similar problem but no firm solutions. I haven't used it in maybe a week and it's worked fine up till now. There have been no real changes since I used it last. Does anyone have a clue?
I boot up my computer today and up pops a message about my bootmbr being missing. I, figuring this was quite bad, stuck in the ol' vista installation disk to run a startup repair. It does its thing, says its successful and tells me to reboot. I do, and get a new message at startup, saying,"Windows failed to start. A recent hardware or software change might be the cause... File: Windowssystem32 tkrnlpa.exe Status: 0xc0000428 Info: Windows cannot verify the digital signature of this file"
So I figure I'm getting somewhere, load the disk repair, and I get "Startup repair could not repair the problem." along with other steps i should take to "send it to microsoft"() So now i run commands like chkdsk /p,bootmbr,bootfix (I've done this before). NONE of these do a darn thing to solve my problem. (Ive done the F8 thing with the load drivers w/o signatures; didnt work.) So, I figure i should take matters into my own hands. So i open up a CMD, and copy a ntkrnlpa.exe from my install disk and replace it with the one on my hard drive. Logical? I thought so. But same results. Except for one thing, when the repair thing runs again, the details say that the file "pshed.dll" is corrupt. I replace this one, doesnt work, and then says the ntoskrnl.exe is corrupt too.... I replace this one as well, but this one has remained corrupt. I sometimes get a new message when running the startup repair. System volume on disk is corrupt. But other times I get "Boot status indicates that the OS booted successfully." So Ive pretty much used all I can think of, short of booting BartPE and copying my important files and reinstalling. One more thing that happened. Last night (when everything was running smoothly) diskeeper did a boot time defrag. I think something went wrong and this is what is causing all this trouble.
My computer was working properly,then I had a power problem, my computer turned off and turned on again.Now my windows doesn't open. When I try to open I receive this message: Windows failed to start. File:windowssystem32configsystem Status:0xc000014c Info: Windows failed to load because the system registry file is missing or corrupted.
Need to fix it without losing my files.I have a restore cd, but I dont want to use it, because I can't lose my files.The cd doesnt has the choice to repair windows.Just restore it. I am using Windows vista premium and my computer is Aspire E380 (Acer) It has C: and D: partition, but I dont know if it is 32 or 64 I already use all steps in F8 screen, safe mode....last configuration...anything didn't work.
LOng story short, I had to restore last night due to what seemed like a video driver problem. I restored, back a couple weeks and it fixed my video issue. It then did the automatic windows updates, including SP1, which I thought was odd, but I went with it. After the download & update the system rebooted...and then it all went downhill. I actually got another error message which I can't recall at the moment, but it was a black screen not a blue.... I then broke out my original windows recovery discs, rebooted and it went directly to the recovery options and screens as I was expecting. The first disc ran fine, backing up files, blah blah.....it said to reboot...and then THIS stuff started.......
After two days of trying to recover my vista installation I've got a new version of vista and it it's still telling me i've got missing or corrupt files. Where can get the correct files/ a good recovery disk/ a bootable virus cd (tried bit defender - didn't work). I've read soooo many pages about this and nothing works. Startup repair - doesn't work; complete system recovery - doesn't work; formatting during the vista installation - doesn't work.
I'm using Vista home premium 32 bit, and it automatically installed an update from microsoft. It then asked me to restart the computer, which I did, but when I did, it wouldn't load again because it said that "winload.exe was missing or corrupt". It then asked me to use the installation cd to restore it, but Vista came preinstalled, so I don't have the CD. How can I fix this? I can't even load to safe mode to restore to a restore point....
I just recieved my new desktop from CyberPowerPC last Thursday. On Monday morning, Windows could not start up due to a missing or corrupt registry. However, Sunday night when I shut off the PC, it was still working perfectly fine. When I turn on the PC, this is the screen I get: The only options given to me afterwards are 3 safe modes, attempt to reboot with the last known good setting, or start Windows normally. Choosing any of those options just gives me the missing/corrupt registry screen again and sends me back to those 5 choices, OR screen just goes black and nothing happens.
I've tried to use the CyberPowerPC Windows recovery disk that came with the PC, setting boot priority in the BIOS to CD/DVD drive to the top. Screen tells me to press any key to boot from CD, then this screen appears: Once it finishes loading, this appears: But afterwards, the screen becomes blank, and I see the monitor actually darkening. The numlock light on my keyboard darkens, meaning that turned off or something too. Here is what CyberPower has told me to do: "The error message you are seeing is a corrupted Windows system file that would require the operating system to be reinstalled. This can be done by booting directly from the Cyberpower Recovery disc. Make sure theoptical drive is set as the first boot device in the BIOS and tap the ENTER key as the computer starts to boot the computer off the disc rather than the hard drive." But of course, that isn't working...The PC is still new, so I have no problem with losing any data if it comes to that.
I recently downloaded a trial version of MS Money Deluxe and can't install; I get a window that pops up saying "autorun.inf missing or corrupt". I'd like to try and buy but can't even do the former.
I had a perfectly good dual boot Vista and XP system until I installed Windows 7 RC. I installed Windows 7 RC to a new partition on the Vista (slave drive) with XP installed on the master drive. Vista and Windows 7 booted okay but despite there being 3 options in the boot menu - Earlier Version of Windows (XP), Vista and Windows 7, XP would not (and will not) boot. The error message when selecting XP from the boot menu was that the boot.ini file is invalid; I then get a message saying that the system32hal.dll is corrupt or missing.
I used EasyBCD to restore a backup of the previous Vista boot loader which worked with XP. Windows 7 disappeared from the boot options but I still cannot boot in to XP - I get the same error message (boot.ini and hal.dll). I can boot in to Vista. EasyBCD tells me that there are 2 entries in the Vista bootloader:.....
wanting to add XP as an addl os using dual boot. I managed to get XP installed along with Vista home basic, but apparently messed up the boot sequence. I can can boot Vista, but not XP ...error window says file: tldr status: 0xc000000f the selected entry could not be loaded as the application is missing or corrupt
I used Vista Boot Pro 3.3 to set the booting. If I set VPR to install legacy booting, it will boot up with XP (no dual boot choice), but not Vista. If I select use legacy boot for selected drive E (XP), it says it is set, but a reboot brings me back to the error above. If I use VBR and set booting for Vista, only Vista boots. I have tried using the XP CD to do a repair install, but it asks for a password, which I never have set. When I hit enter, it keeps asking for password, then times out after the 3rd failed attempt. I only have the Vista backup CD (2 actually) from Dell, not an install Vista CD. My hd is a SATA, and I see that may be a problem by reading other threads here, but I have no floppy drive, only the cd/dvd. If I need another file which may be missing, can someone point me in the right direction ?
I had no problems yesterday or ever before. Apparently there was an update last night, and since then my desktop won't start up. It gives me the error saying windowssystem32driversfltmgr.sys will not load. I did a system restore to the system checkpoint before that update last night - to no avail though. I've done the automatic startup checker twice using the vista installation disk, it says there aren't any problems. is there anyway to just replace this fltmgr.sys from another vista machine? won't boot to safe mode, same error. last known good configuration doesn't work.
Boot Manager Failed to load - ntoskrnl.exe. brand new to the forums but have been here for the past two days trying everything I can find to try and get my Vista Ultimate machine working again. I shut the computer off the other night before work, came home in the morning and rebooted... and upon loading got a black screen "Windows Boot Manager" coming up asking/telling me to "Repair" the computer. File: Windowssystem32 toskrnl.exe Status: 0xc000098. Info: Windows failed to load because the kernal is missing, or corrupt
I installed my vista disc and went through the repair... nada. I then tried a restore... nada... and now am at a loss. Is there a way to copy the file via the Command Prompt to the Vista drive from the dvd? Is it that simple (ha... I know... it never is)?
Several days ago there was a large number of updates available to download. I allowed the system to update all of them. Three, KB974234, KB972581 and KB973709 it was shown on the update history page as failing to download. Reading as to a possible solution, I tried to load them manually, saving those files to my desktop, right clicking on each, to run as an administrator. After each loaded I got a message telling me they were already installed on my system. My question is why does the "failure" notice remain on my history page and how can I delete those three file entries?
What is best way to identify and/or reload missing dlls? Should the Vista Operating System disc be used? Problem is a game that will not load saves, always goes back to the game introduction. Have tried un-installing and re-installing but no difference. Chat help from Electronic Arts unable to resolve. I think it is a missing dll file. Saved ganes and check points are in "Documents" but something is missing that links them to the game program.
I play a PBE game called VGAPlanets-4 (VGAP4) and an excellent programmer has been making updates, changes, fixes etc... to the original code which was compiled with VB5 I belive. The new code is being written with VB6. The problem is that in order to take benifit of all the new whistles and bells of the new code I need to put a version of "mci32.ocx" into the Windows/System32 directory. I do so and get an error:
"Run-time error '372': Failed to load control 'MMControl' from mci32.ocs. Your version of mci32.ocx may be outdated. Make sure you are using the version of the control that was provieded with your application." I've tried to use regsvr32 to register the ocx but no luck. I've tried multiple versions of the file, no luck. It worked under XP SP3 after using regsvr32.............
I built a new system, installing Vista Business 64bit to take full advantage of DX10 and large amounts of memory. Not having many games lying around, I decided to download steam and install Half Life 2. If you are reading this, and using a 64bit edition of windows, then my guess is you are having problems with Half Life 2. I encountered two problems, and after a few hours was able to solve both of them.
GAME HANGS ON INITIAL LOAD (BLURRY IMAGE SCREEN) "64-bit" message was at top of screen game never loaded Potential cause: It seems that while steam intended HL2 to have a 64bit edition, with an update along the line (maybe with the release of Left4Dead according to others) the support was broken and the game doesn't load.
Fix:Unfortunately, the fix removes the 64bit potential. In steam, right click half life 2, and select. From the dialogue box, click Enter "-32bit" and select This got HL2 to load, where upon playing I encountered problem number 2.GAMEPLAY CAUSES FULL SYSTEM HANG- Symptoms: After playing for less than 5 minutes, the game would crash and the three fingered salute (ctrl+alt+del) couldn't get me out of it......................
as a software developer I find it very hard to use Vista just using the keyboard. One of the things I'm missing is the option to create new folders from within the Vista Common Dialogs for loading and saving files. Usually on Windows this is "+, , ". Did I perhaps misconfigure Vista to not support keyboard shortcuts? Or are they missing indeed?
In my 64-bit installation, the print spooler server suddenly stopped running (and will not restart). I've tried cleaning out registry keys (HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPrint), deleting the files out of Windows (C:WindowsSystem32spool) to no avail. The system log contains many of these:Error Service Control Manager Eventlog Provider7034None The application log contains these:WarningSpoolerSpoolss1035NoneThe print spooler failed to load print provider localspl.dll. This can occur because of system instability or a lack of system resources.ErrorSpoolerSpoolss1027None The system failed to initialize the local print provider: Error 0. This can occur because of system instability or a lack of system resources.
When I tried to make a backup I've got an error message saying:
Backup failed 0*80070017 cyclic redundancy control failed
I've searched the net for that code and they suggested chkdsk, I've done that and ran sfc/scannow with elevated privileges. Sfc did correct some problems but there is one problem he could not repair. I've looked at the log in c:windowslogscbs and searched with the tag [SR] to narrow down, and there was a problem that occured several times.
Windows SIdebar settings.ini is corrupt or missing (64-32bit program files) and when sfc tries to look for backup of the source file it also stated that this one is corrupted. So I was wondering I've someone knows a method to correct this? Maybe if there is a way to reinstall the sidebar my problem could be solved (?) I can't use System restore because I recently deleted those checkpoints, because of an space lack on that partition.
I installed Halo 2 and when I click to play the game, I get an error that says: Initialization failed. Either insuffecient resources were found to run the game, or game data is missing or damaged. Reinstalling the game may fix this problem. Now I tried reinstalling the game and this error still comes up.
When I try to go to the windows update page, it always says "page failed to load." I want to disable the updates because there is a particular one that is installing and messing w/ my mouse!
Something seems to be amiss in my Vista install and I am having problem install some things. Whilst working through some KB articles I was instructed to "Regsvr32 wbemupgd.dll". The result is a red X and the following message: The module "wbemupgd.dll" failed to load. Make sure the binary is stored at the specified path or debug to check for problems with the binary. So I searched my hard drive and it seems that "wbemupgd.dll" has gone missing. Any idea where I could get this .dll and why it might have gone missing?
when i click start button and right click into computer for properties., then. i was shcoked because nothing appears. and it displays "The page failed to load".
