Upgrade System - No Boot Option
Jan 15, 2006
I recently upgraded my System from P3 to P4, also added a new 120GB SATA Hard Drive which I kept as a Primary Master.I also attached my old 40GB IDE hard drive which is the secondary master. I had installed Windows XP Pro on the IDE HDD and now have installed the same O.S. on the new drive also. In my old system which also had two hard drives (both IDE drives) I used to get a boot option. But with the SATA + IDE combination the boot option has disappeared and it boots directly from the SATA Drive.
View 5 Replies
ADVERTISEMENT
Mar 4, 2007
I need to reinstall my windows XP on a new system that i am building. My old system has died and I do have a Boot CD from my "UPGRADE" version from the OLD machine. Will i be able to load the upgrade version (i have my XP Disk) from the old machine on my new machine starting with the Boot CD?
View 6 Replies
View Related
Jun 26, 2005
Error on boot: we apologise for the inconvience but windows did not start successfully a recent hardware or software change might have caused this if your computer stopped responding restarted unexpectally or automatically shut down to protect your files and folders choose your last known good configuration: 1. boot in safe mode 2. boot in safe mode with networking 3. boot in safe mode with command prompt. Any option i choose it goes to boot screen comes up and restarts and the same error as the one above comes up.
View 7 Replies
View Related
Sep 25, 2006
when I edited my boot menu I left off the NoExcute=OptIn at the end of the boot menu line to load my system and was wondering if I can add this now without messing everything up ? I just found out what this option does and looks to me like a have to option. This is on XP Pro.
View 14 Replies
View Related
Feb 22, 2006
I changed my boot option using msconfig to safe mode. But I didn't realize I needed a local username/ password to login. So now I don't know a local username password and pressing F8 and specifying Normal mode still boots in safe mode.
View 14 Replies
View Related
Jul 21, 2010
Something weird has happened. I left my asus F6a to my cousin for a few minutes and all I got was a trojan. It seems I removed it, but now the pc will only boot if I select cd/dvd first boot option and I put no cd/dvd inside! I discovered it by chance, cause if I but it normally from the hard drive, I only got a black screen.
View 1 Replies
View Related
Aug 27, 2005
I have XP MCE2005 and I am desperatly trying to find a way to choose
different boot option during startup.I do quite different things with my MCE, I like Playing games, Editing Photos, Editing Videos, PVR series, work, etc.I have many different programs for each application , many of which have entries in the start up and services. ALL are loaded during start up, consuming unI which to know if there is a way to create various start up or boot option were I can predefine and choose a proble for 1) Gaming 2)Video/Photo editing
View 3 Replies
View Related
Oct 4, 2008
After CPU the processor was installed I attempted to boot normally and the 1st time it worked - but Windows said "you may need to restart your computer for hardware to perform properly [paraphrasing]" so I restart...Now when I select "Windows XP Professional" attempt to boot normally it just restarts the PC. It also does this in SAFE (and SAFE with Cmd, Ntwrk Prompt, etc.) It just so happens that I use an app called TuneUp Utilities and there's an option during startup for "Windows XP Professional (TuneUp Backup)" which I tried when all else failed (Last Known Good, etc) and it boots just fine.My question is: How can I repair XP so I can boot normally? I've tried checking the disk(s) but not much help, and while there's a lot of folks offering different solutions (repair install, or god forbid- fresh install) I thought that my ability to boot through TuneUp might offer a clue as to what's ailing me.
View 14 Replies
View Related
Feb 23, 2010
My 'puter upgraded itself (windows i think) and then froze. I restarted it and now after I go to F8 and try everything, like (configure to..., safe mode..etc) it just go to black screen of purgatory. I go into bios and look at it like I know wtf I am doing and leave and then back to that screen of eternal damnation. Now before I launch my CPU out of my pumpkin gun. I don't have a start up disk nor anything backed up, that's how i roll.
View 14 Replies
View Related
Aug 10, 2005
I'm sure this has been posted on here before, but bear with me because I didn't know what to search under to find this answerDuring my system boot-up, I have the option to choose from 2 different Windows XP's. The one that I boot-up off of is on my smaller hard drive, which just has Windows on it. I have a now non-existent version of Windows on my main hard drive which was put on there when I was fooling around in college, and apparently I never properly got rid of the OS on my main hard drive.
View 5 Replies
View Related
May 7, 2005
Can any one tell me how to set the "Recovery Console" as a boot option? I also don't have a CD of Windows XP pro, is it still possible?
View 6 Replies
View Related
Jan 15, 2008
i dont have the option with my xp to boot and run a repair "r" i know this has to do with oem,volume license disks etc...i was wondering if there was another way i could run a repair...
View 5 Replies
View Related
Sep 17, 2007
I have a Compaq SR-1200NX system that came with a 40gb drive. It was too small for all my music and apps so I installed a second drive which I then started using for files.So Drive 1 was 40 gb and Drive 2 was 80GB..I was running out of space again so I used a drive cloner to move the 40 GB drive to a 200GB Drive.Disk Management shows different according to it Drive 0 is the 80gb drive and is assigned a letter of D and Drive 1 is the 200GB drive assigned a letter of C.Both C and D have a Windows directory off of and a Program Files but the Program Files on C has more entries than the one on D.
View 2 Replies
View Related
Feb 16, 2006
just formatted the hard drive and installed xp pro on a hp 533 computer.it had xp home on it originally.now when i boot up i get the option to start xp home or pro.how can i get it to just boot to xp pro and not even ask about xp home which is not on there anymore?
View 2 Replies
View Related
May 18, 2008
I'm sure this has been asked 100 times before but my computer randomly shuts itself down so I don't really have the time to look for it. I need to reinstall Windows XP. I want to do a clean install. I have the disc and the reg code. What I don't have is the BOOT FROM DISC option!! How do I get it or how do I do it?
View 1 Replies
View Related
Jan 27, 2009
I lost dule boot satrtup options I still see both options as hard drives but the option to pick whitch
View 14 Replies
View Related
Apr 6, 2010
a problem w/ my vid card, In order to remove any doubt that it wasn't a driver issue, I used the recovery CD. First attempt something happened and after doing the installer, it couldn't boot properly to continue the installation process. So I re-installed another time.This one completed normally and everything is (mostly) fine.
One big thing thats irking me, is when I turn my computer on it asks me what I want to boot into giving me 2 WinXP options. (I havent tried picking the 2nd option)
View 5 Replies
View Related
Sep 2, 2008
A week ago I had some malware crap going on and was going to reinstall windows. The windows XP setup crashed partway through (was having some hardware malfunctions too so the comp crashed). I fired windows back up and found Malwarebytes. Ran it and it got rid of the malware and I was back to functional windows with no issues.Now at startup, I have a dual boot selection between Windows XP (which works normal) and the windows XP setup. How do I get rid of the Windows XP setup option so that it loads into WinXP normal?
View 2 Replies
View Related
Jan 19, 2007
I have 5 or 6 different bootable floppy drives, partition magic, norton ghost, etc. I want to make them all bootable off a single CD, thumbdrive, etc. with a simple multimenu in dos. I've created the bootable thumb drive, and I've messed with the [menu] commands and such, but I can't get it to work. Is there a way to make a simple boot option to say, use this config.sys and this autoexec.bat?
View 2 Replies
View Related
May 20, 2007
I am unable to go into my windows xp desktop. The computer boots and stops with the following menus. 1. Safe mode 2. Safe mode with networking 3. Safe mode with command prompt 4. Last known good configuration 5. Start windows normaally. I selected each prompt but none of them let me in to my desktop. Instead after each booting it keeps on bringing me to the very same menus mentioned above. I need an immediate help that will help me solve this problem in order to be able to access my Desktop.
View 2 Replies
View Related
Jun 11, 2007
Ok, so this week end I tried adding a new HDD on my XP machine.
This HDD had 2 partition on it (from a previous XP install on another PC) so I used the XP install CD to basically remove it and create a single partition on it (that's the only way I knew how to do it).However, while doing that, it ended up creating a dual boot config so that now, when I start my PC, I have to chose which OS to start:1) The regular XP install2) The one that never got installed on the new HDD since I only partitionned it.?
View 3 Replies
View Related
Dec 8, 2004
I recently reformated my machine with XP, now when i boot it up it has the option to boot to WIndows XP Professional listed twice and it counts down from 30. I did a search for the boot file and found it and change the time to 3 seconds and deleted the second entry of XP. But still nothing changes and still has the otpion of booting to XP twice and counts down from 30. Maybe i change the wrong file. Does anyone know the exact file name and ext. to chang ethis option.
View 9 Replies
View Related
Aug 23, 2005
Just got a new computer with Gigabyte GA-K8SNC-939 Motherboard. The problem is that on each boot , and shutdown, the floppy drive is accessed (i.e. motor runs ).The floppy drive is NOT selected as a boot option in the bios and the access on boot comes just after the 'Loading Personal Settings" screen. On shutdown it is just before the end , not immediately on shutdown.I seem to remember there was a Floppy Seek setting somewhere in Windows at one time, but I can't seem to find it in XP SP 2. As it happens well into the boot cycle, I don't think it's related to the motherboard.
View 7 Replies
View Related
Jun 7, 2008
I recently upgraded my laptop from XP Home to XP Pro. But, I absent-mindedly started to install by booting from the CD like I was doing a fresh install/reformat rather than doing it from inside the OS to do an upgrade. I caught myself, however and restarted without the CD and upgraded Windows from inside Windows. It worked, but now when I boot my computer, it gives me two options to choose from: "Windows XP Home Edition" or "Windows XP Professional Setup." When I pick the Home option, the computer boots up fine and goes to Windows.
However, when I go to Start>Control Panel>System, it shows that I have XP Pro even though I chose the XP Home option at boot. If I choose the XP Pro Setup option, it asks for the SP2 CD, even though the OS is bundled with SP2 on the same CD. I hit Enter, and it keeps asking for the SP2 CD even though the CD is in there. I tried to go to the Disk Management screen and delete the XP Pro Setup partition (which was only 1Gb), but that didn't work. So, I figured that boot.ini was still confused as to what to boot to.
View 1 Replies
View Related
Jul 9, 2005
Had to replace motherboard in a PC and now I'm caught in a reboot loop. I keep getting the advanced boot option menuw where your asked wheather you want to Safe Boot, Safe Boot with Networking, etc. Which every choice I pick, the system reboots and takes back to the same place.what to use or if the Recovery Console will solve my problem.
View 3 Replies
View Related
Sep 2, 2008
The first thing is I keep getting a 'Windows Installer' box popping up which says 'preparing to install' when I check my Hotmail emails. This problem began after I had a windows update which turned out to be an upgrade to Service Pack 3, last week. As soon as I've clicked cancel on the Windows Installer box, I get an alert from ZoneAlarm saying Windows Messenger is requesting to access the internet.
The first time it happened I just let the installer do what it was trying to as I thought the service pack upgrade had made changes to some settings. But then it happened again as soon as I opened the next email (I only open emails from people who I know like my close friends or family by the way). So I'm presuming there's a problem somewhere?
View 2 Replies
View Related
Sep 20, 2005
my computer is a pentium II with 128 mb ram and 5 gb. I wont to upgrade not buy a whole new computer. Does anyone suggest any good and cheap upgrades for
View 7 Replies
View Related
Sep 6, 2005
I'm having this problem with windows xp pro fresh install onto sataHD. Pressed F6 and installed sata drivers for the mobo etc. Now i hastento add that i have tried this 3 times now, set up runs smoothly windowsinstalls however when i have finished windows will only boot up withthe CD in the CDROM. Been into Bios and changed boot sequence but stillif no CD it just gets to boot from cd in the boot up screen and stops,put the disk in and windows boots straight up and away we go.
View 1 Replies
View Related
Dec 7, 2005
I was given a computer how do I reset the TCP IP.
View 2 Replies
View Related
Dec 31, 2005
What is the use of this thing if i can't restore a previous setting as i keep getting restore incomplete.
View 9 Replies
View Related
Aug 10, 2006
I use Windows XP SP2. Recently noticed that when I left-click on any of the icons of the Hard-disk drives and/or Devices with Removable Storage within 'My Computer', the 'Search' Option opens up by default instead of the 'Open' option, like in other folders. Likewise, when I right-click on the said icons, the 'Search' option is topmost & the 'Open' option has been relegated to second position. I would like the Search option to come first. Can't remember whether this was so from before or changed recently.
I have used Norton Partition Magic 8 recently to resize my partitions.
View 7 Replies
View Related
