Remove Dual Boot Option - Installed New HDD Partitions
Jun 11, 2007
Ok, so this week end I tried adding a new HDD on my XP machine.
This HDD had 2 partition on it (from a previous XP install on another PC) so I used the XP install CD to basically remove it and create a single partition on it (that's the only way I knew how to do it).However, while doing that, it ended up creating a dual boot config so that now, when I start my PC, I have to chose which OS to start:1) The regular XP install2) The one that never got installed on the new HDD since I only partitionned it.?
i upgraded from windows 2000 pro..to xp pro...but instead of overwrite it created a dual boot......i want xp pro only...and the memory space that 2000 takes up....how do i unintall or whatever...where i only have xp pro....don't forget i'm as dumb as a rock...computer wise...i have dell compaq......if u need more as to specs..i'll find it..but difficult cause it locks up......
i have Windows XP Home edition i got the "NTLRD is missing press ctlr alt del to restart" error i do not have a windows xp cd i found a Windows 2000 server CD and i installed windows 2000 on the same hard drive but on a new partition i can now boot Windows 2000 in my computer it shows two drives C: and H:
c=Windows 2000
h=Windows XP
i found the NTLRD file online and placed it in H:now how can i boot windows XP instead of Windows 2000 ?
I'm sure this has been posted on here before, but bear with me because I didn't know what to search under to find this answerDuring my system boot-up, I have the option to choose from 2 different Windows XP's. The one that I boot-up off of is on my smaller hard drive, which just has Windows on it. I have a now non-existent version of Windows on my main hard drive which was put on there when I was fooling around in college, and apparently I never properly got rid of the OS on my main hard drive.
a problem w/ my vid card, In order to remove any doubt that it wasn't a driver issue, I used the recovery CD. First attempt something happened and after doing the installer, it couldn't boot properly to continue the installation process. So I re-installed another time.This one completed normally and everything is (mostly) fine. One big thing thats irking me, is when I turn my computer on it asks me what I want to boot into giving me 2 WinXP options. (I havent tried picking the 2nd option)
A week ago I had some malware crap going on and was going to reinstall windows. The windows XP setup crashed partway through (was having some hardware malfunctions too so the comp crashed). I fired windows back up and found Malwarebytes. Ran it and it got rid of the malware and I was back to functional windows with no issues.Now at startup, I have a dual boot selection between Windows XP (which works normal) and the windows XP setup. How do I get rid of the Windows XP setup option so that it loads into WinXP normal?
im not sure if the way round iv done things was stupid or not, I have my machine, with XPPro installed on, bought another H/D and installed vista 64 on it, however i installed vista with the xo drive unplugged, and i cant work out how to get an OS choice on boot
Installed Win XP in a hard disk and installed vista in another But I didn't like Windows Vista and just formatted the Hard Disk But now when I turn the PC on, the Dual Boot screen continues to appear How I make it disappear and make my PC only start with Windows XP?
I was running a dual boot of windows XP and Ubuntu Linux prior to installing Vista beta 2. Now, after upgrading windows XP to vista beta 2 i no longer have the boot screen that allows me to chose between my linux boot and my vista. Any way i can get back into linux? I did not make a boot disc for linux.
I recently brought a laptop with XP Home preloaded, but as I had a retail CD of XP pro I thought I'd boot from that CD and run setup which includes a full reformat. I now have XP pro up and running, but I get an annoying "dual boot" screen giving a choice of XP pro and XP home! How can I get rid of this dual boot screen as XP Home no longer exists?
A friend wanted to remove the FAT32 Win98 partition and leave his XP NTFS partition as the boot partition. He has used PM7 to delete the FAT32 partitin and move the NTFS t the front of the disk. However, it now does not boot. FIXMBR and FIXBOOT (from the Recovery console) looked as if they were fixing things but it still does not boot ("Invalid System Disk...").
I am setting up a dual boot system on my comp with two partitions. What I want to do is Lock down the partitions.
So say when I am logged into Windows XP disc C: I wont be able to read or write files on the Windows XP disc partition E: Both are parititioned as NTFS is this a possibility
I have a friend who's computer has 4 partitions on it. He has no clue how they got there, and I have zero knowledge of partitions. His C drive has like 13gb and is full, his G drive has the most and I think it's like 76gb and then he also has an H and an I.
Someone who was "trying to fix it" copied the C drive and pasted it to all the other drives, which didn't do anything except, well, make copies of everything. I spent a couple hours and just went through folder after folder and made one "KEEP" folder and cut/pasted everything into it. He went and bought a portable hard drive and we'll move everything over to it for safe keeping while we try to get those partitions out.
My question is, would it just be easier to reformat the whole thing? I have all of his docs and pictures, which is the biggest thing for him. He has a Sony set, and has a repair disk and his WinXP number. I have a OEM WinXP disk, so should I just go into the bios, have the computer boot to the CD first, then do a repair or reformat? And at what point do I remove those partitions???
I had some failure and have recovered everything and upgraded to SP2.However, now after the POST as we go to load windows it tells me tohighlight which O/S I want to use.I always take the first (Windows XP Home Edition) and it boots andoperates fine. However, the second choice is also Window XP HomeEdition and if I take it it tells me there is a disk hardware error and it cannot boot.
I have had two video cards in this machine (Windows XP Home SP2) in the past for a dual screen setup.Today I put in a 2nd video card again (as the one that was in there previously has gone walk-about) but I dont have the option in windows for the 2nd screen.Everything appears fine in device manager (the screen that is working is the PCI ViRAGE one), as for the GeForce - well the light on the monitor comes on but doesnt display a picture, but in display properties there is no option for the 2nd card. (see attached screenshot)
I have had a 60G external hard drive that has worked flawlessly for 2 years with both my desktop computer running Win98SE, and my newer laptop with Windows XP. This external drive was formatted with FAT 32 and NO PARTITIONS for all 60G. Because I have a Lot of music files and digital pictures, I have filled up the 60G drive, so bought an IOGear 160G external drive. This drive arrived partitioned into 6 partitions, of 20-32G sizes. This is completely wrong for how I want to use the drive. All my mp3 programs requires the library to be all in one volume, so I need 60-80G all in one volume just for music. IOGear support says that Windows XP does not allow volumes any larger than 60G in FAT 32. (This seems crazy since my older drive is all one volume and is FAT 32.
I have been trying to install Windows XP as a second OS as I already have Windows 7 Ultimate installed. Unfortunately, after I select a partition, format it, and reboot the system stalls on the screen after the BIOS that has something to do with a list of devices and such. After 10 or so seconds a few characters and letters go blank randomly on the page. I rebooted and selected my cd drive as the boot device and accidentally didn't press a button in time to boot and a bunch of highlighted numbers were thrown all over the screen and a random smiley face on one of the lines.
I'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
I have dual booting on my PC with Vista home premium on a 500 Gb SATA disk and XP Pro on a 250Gb SATA, both internal. Vista no longer holds terrors for me and I'd like to get rid of XP and regain better use of the 250Gb HD. Can I just remove XP from the control panel in the XP boot or is it a lot more complicated?I don't really want to re format the XP drive as I'd have to transfer a lot of data and files
I have Win XP home installed as OEM software on the C drive of my PC. I also have this OS as a Norton Ghost file supplied with the PC as a "Recovery CD". I have installed a second hard drive designated "D" This all works fine. I wish to install Win 2000 (which I have on a Microsoft cd) on the second HD. I would then hope at boot - up to be given the choice of which OS to load. Can anyone tell me what is the simplest way to do this?
My computer has been bogged down by spyware and such, and it's going to be much easier to just format my computer and start from scratch. How do i go about doing this, it's been a while.
My company was messed up so I decided to clean reinstall xp pro, my hard drive was split into 3 partition, C, E backup and L photos and bits, at the point of the install were you decide,delete our make partitions, I decided to delete L as it was not needed and clean install onto C, leaving E with my docs and data
The install went fine, when I looked at my drives in admin tools the C is marked boot and E system, I was going to delete E and make new partitions, but because it marked as system, can not delete it.How did I do this and is there away to put it all back onto C, without reformatting
When I click this option in my Start menu on my Dell Dimension 2400 with Windows XP Service Pack 2 I get a Add or Remove Programs window that gives me three choices: Microsoft Windows, Non-Microsoft and Custom. I cannot get the Microsoft Windows option to set because it stays set in the Custom option. When I click on the Microsoft Windows option and then click OK it will automatically go back to the Custom option.I have tried clicking and unclicking the Microsoft Windows options in the Custom tab but it does no good.
I recently re-installed XP and now when my computer boots up I have 3 choices Windows XP Professional Windows XP Professional Windows XP Professional Setup It gives me 5 seconds to chose which system I want to load, if I don't make a choiceit automatically loads the Setup. The only one I need is the first XP Professional listed
I have been trying to make some family clips and found ou that windows XP brings Movie Maker. I have Windows XP Home eddition. I tried to look in the Accesories/Entertaiment/ folder for the Movie Maker, but it's not there. I went to add/remove windows components, but there is no option to add movie maker. I thought I did not have the software so I went to the xp windows microsoft downloads and look for the movie maker. I tried to down load the package that brings this software but it run and applation to check if I required the download, but it was already installed. So it looks like that it's already installed, but I don't know how to acces it.
Now I cannot boot without the 120GB plugged in (tried unplugging the drive and booting and it said the it was Unable to boot from disk or something). I eventually deleted the partition on the old drive in setup and then canceled setup, and I still couldn't boot. So I reinstalled winXP on the old drive and now it boots fine. Of course what I have to do is reinstall XP with the drive unplugged, but do I have to completely redo everything, or can I somehow reinstall without starting from scratch? I've tried using the setup disk in windows with the drive unplugged (I know it isn't safe to unplug drives with the computer running but I had run out of ideas), but it said that it couldn't reinstall windows because there was no valid System Partition (which is on the other drive.
I re-did my pc, i have multiple partitions and multiboot. 2 partitions have win xp one for normal usage and one to test out apps. Everything installed fine both work. But when i boot my machine unless i have the WinXP Cd in the CDrom i get ntldr missing. if i have the cd in its boots fine. i thing i can do to fix this?
when I edited my boot menu I left off the NoExcute=OptIn at the end of the boot menu line to load my system and was wondering if I can add this now without messing everything up ? I just found out what this option does and looks to me like a have to option. This is on XP Pro.
