I'm sure this has been asked 100 times before but my computer randomly shuts itself down so I don't really have the time to look for it. I need to reinstall Windows XP. I want to do a clean install. I have the disc and the reg code. What I don't have is the BOOT FROM DISC option!! How do I get it or how do I do it?
View 1 RepliesI have wanted a new PC for so long, almost 8 years since my last IBM desktop
Well my last child is a smarty and she got a ("full boot") paid scholarship to college for upcoming Sept. So wife said go ahead, I bought a Dell, the PC desktop I have always wanted. Now my question, I have had the Dimension E-510 for about a month, I love it, really, from day I took it out of box just perfect! It has XP's Media OS on it. It also has so much "junk" I'm wondering if I should do a Clean Install of the OS. I bought the Operating System on a CD when I purchased the PC. Am I nuts or should I just leave well enough alone? I didn't get a Floopy drive so I guess I would just Boot with the OS CD in it.
Wanted to put my spare computer to use. It previously had Win XP Home on it. Last week I installed Windows 7 beta to have a look, however after realising I would be unable to connect it to the internet due to security restrictions with my University Internet service provider. I decided to install Win XP Pro with the plan to dual boot it with ubuntu. (btw I was very impressed with my short look at Windows 7.) I deleted all partitions and made a new one on my master disk and formatted to NTFS. Installation went fine. However after the compulsory installation reboot the Windows Loading splash screen apears but nothing happens, I never even see the loading bar. I have now tried to install win xp pro a number of times, I am unable to boot in to safe mode, I have performed CHKDSK in the recovery console and FIXBOOT, however to no avail. I'm really stumped as to why I can't get windows to load, I the know the disc is fine as it has been used successfully in the past.
View 7 Replies View Relatedi have a custom computer build, working fine for a year and a half, system crashed while online. inserted windows XP system/boot disc, goes to mobo screen, goest to a blank screen. shows press any key to boot from cd. then verifying/inspecting system components etc. then a blank screen, system wont do anything.
View 5 Replies View Relatedi ran active kill disc program to erase local disc c then went to bios and changed boot device order saved changes and reboot now system wont boot from cd i get error loading operating system msg
View 4 Replies View RelatedA week ago I had some malware crap going on and was going to reinstall windows. The windows XP setup crashed partway through (was having some hardware malfunctions too so the comp crashed). I fired windows back up and found Malwarebytes. Ran it and it got rid of the malware and I was back to functional windows with no issues.Now at startup, I have a dual boot selection between Windows XP (which works normal) and the windows XP setup. How do I get rid of the Windows XP setup option so that it loads into WinXP normal?
View 2 Replies View RelatedWhen I use Disc Clean Up it deletes everything I tick but when I check afterwards it is sill leaaving the WebClient/Publisher Temporary Files - 32KB in.
View 8 Replies View Relatedi used my maxblast disc to clean my hard drive now that i try 2 reinstall windows back everything i try fail i changed the bios to boot from cd rom and floppy [i have the 6 disks of xp bootables what do i do now i cant get anything to work
View 4 Replies View RelatedIs it ok after running disc clean up to click on compress drive to save space?
View 2 Replies View RelatedPC wont boot up any more , it says there could be a currupt or missing file , it says its config system and says it might be able to repair the file using the install disc. i have a System Recovery CD-ROM
View 1 Replies View Relatedhey anyone remember that boot disc that had everything and it also had a mouse function in it? it was like boot magic or something i cant really remember. I only remember it had 2 versions one was the floppy which was free and the other you had to pay for the cd version
View 3 Replies View Relatedwhen I edited my boot menu I left off the NoExcute=OptIn at the end of the boot menu line to load my system and was wondering if I can add this now without messing everything up ? I just found out what this option does and looks to me like a have to option. This is on XP Pro.
View 14 Replies View RelatedI have just recently gotten a new computer which came with Vista. Previously what I have done with any new operating system I got was installed it into my old computer. However, I came to find out you can only have one computer assigned to each cd, unless I wanna buy another one, which is unecessary. I wanted to get rid of Vista and return to XP but the XP disc would not install because of multiple errors, such as missing ntldr.
View 14 Replies View RelatedI changed my boot option using msconfig to safe mode. But I didn't realize I needed a local username/ password to login. So now I don't know a local username password and pressing F8 and specifying Normal mode still boots in safe mode.
View 14 Replies View RelatedThis one has really got me stumped, and even worse, I need this stuff installed ASAP,So yesterday I formatted/install windows xp pro sp2, I did my usual thing, windows updates, fire fox,Skype. I then tried to install MS Office 2007 Enterprise. I (still do) recieved the following error message, "Setup cannot find Office.en-usdwtrig20.exe. Browse to a valid installation source, and then click OK", allowing me to browse for dwtrig20.exe.dwtrig20.exe IS THERE, the installation works perfectly on another machine of mine!I then tried to install MS Visual Studio 2008 Pro, this time, i received an error while trying to install Visual Studio. It failed while installing "Visual Studio Web Authoring Component". I extracted this component and attempted to install it 'on its own' and it failed.
View 1 Replies View RelatedI bought 2 SATA HDDs and would like to set them up as RAID and clean install XP and all the drivers/programs on them. I don't want to use those image drive programs to transfer the old drive to the new drive. My old HDD has XP on it (activated) and I would like to format it and use it for data storage later. Do I need to reactivate after I clean install XP on the new HDDs (same mobo and CPU)? I have NOT plugged the HDDs in my computer yet.
View 4 Replies View RelatedI am going to try to do a clean install of XP. When i am ready to get my updates do i download all of them at once then reboot or do i have to get one at a time and reboot after each one?
View 4 Replies View Relatedwhat drivers will I need? ..I have most of the stuff but some of the disks were for my winme OS I think. How do I find out what motherboard I have and what driver I need?if it all goes pear shaped will I be able to put my old master in and get back to square one?if it the Xp install goes fine can I put in my old master as slave and copy the needed files over to the new master? The old master is fat32, so would that be a problem?I only have the winme version of word but my dads laptop has word perfect for xp...could I use this?
View 4 Replies View RelatedWhat would be the easiest way to do a clean re-install of Windows XP without the manufacturer's CD?
View 2 Replies View RelatedI am unable to reinstall my HP printer driver and accompanying software and after spending more than enough time trying to remedy the problem, I've decided to reload Windows XP either by a clean install or a reinstall per this thread. I hope to get some advice here.The details that led to the problem of being unable to install my printer drivers and my attempts to remedy the problem are very long and drawn out and may not be relevant to this post or my desired solution, so I will not go through them unless requested. Suffice it to say that I have spent a good 30 hours attempting to remedy the problem, with a good portion of that time spent with free HP Support. None of their "fixes" or any of my own attempts after lots of research have been successful.
I have installed XP several times on several different machines and thus, I'm very confident with a routine install. However, due to a special configuration on this computer, I need some advice.First: Will a reinstall per this thread potentially fix my printer problem? I know there may not be a definitive answer here, but I would just like to get some feedback.If more detail is needed on the problem, I will be happy to provide it.Second: Due to space restraints on my boot drive (18 GB SCSI drive), I moved the Documents and Settings folder to a large IDE storage drive (E:) on this machine. Will I be able to refer to the Documents and Settings folder during a clean install, so that all of the current settings will load? If not, is there a solution for getting the current settings loaded into the clean XP install?
In reinstalling Windows XP, I did a full format to erase the old programs. While reinstalling the various programs, Sun Java, it posted a screen stating that a version of this program was present in Document and settings. I thought that the full format would clear this out.but evidently it didn't.
View 12 Replies View Relatedget winXP to format my sata drive at bootup, so I can clean install XP again I'm resorting to this measure 'cause XP seems to be hanging during bootup
View 1 Replies View Relatedhow can I clean my c drive so that I can do a complete clean install of xp pro. I do not need to save any of my files or programs. I would rather get rid of all the bugginess and start fresh.
xp pro is the current OS.
Plan to do a clean re-install of my Toshiba Satellite P10 series , I have the disc's that came with the computer IE . Microsoft Works , and two Discs marked Product Recovery CD-ROM, is this everything i need to do a re-install and what order do i use the Disc's , as you may gather i haven't done this before.
View 1 Replies View RelatedI had gotten some malware, and despite all my efforts(combofix etc.) I couldn't get rid of it, so I bit the bullet and wiped the partition and reinstalled windows XP professional clean. I have gotten malware before and done this no problem.Now after installing windows XP and installing some drivers, I noticed the computer would lag horribly, I checked task manager and it showed 100% CPU usage. I Checked the processes and it is always showing that "system" is the one doing this. Also windows XP is incredibly slow on boot up, and won't even shut down. Now, I'll state what I KNOW is not the problem.
View 13 Replies View RelatedI am working with a small school as IT help (along with other hats). We recently replaced PC's in a computer lab with new IMACs. I now have these older PC's that came preinstalled with Windows XP Home on them. I was going to keep them around to use as back-ups in the classrooms or additions for tutoring,etc. My first question is, since they were used for about 2-3 years in a lab scenario, should I do a fresh install of Windows Xp or just try to clean them up the best I can. (They all are DELL running 797mhz and 512mb RAM.)
If a fresh install is the best option, I have another question.
Its time for me to rebuild the old machine and i started looking for a guide i once saw on here (TG) which showed you the best way to install a clean copy of XP on a new machine.
View 2 Replies View RelatedI recently did a clean install of Windows XP but for some reason one of the features I used to have no longer works when previously it did work. I can't set the PC to hibernate. It's not really a big issue I know but it bugs me and I hate being stumped by such an issue. I've tried everything including looking for drivers. XP says it doesn't need a APIC driver yet it's listed under system hardware. Everything else works fine it's just this little thing that is bugging me silly.
View 6 Replies View RelatedI was trying to do a clean install with my Sister's PC because she messed it up so badly with adwares, spywares, and what-not.First, I tried to boot the XP Home cd but it didn't work. I don't even know if it's bootable?anyways, then I tried installing from Windows itself, which I later read was something I shouldn't have done.The install was going well, then it rebooted the PC. Now, I see an option to boot the XP cd.Specifically, before, I only had options to boot Windows XP Home and go into the Windows Recovery Console.I chose the XP setup and tried to delete the C: drive, but it said I couldn't. Then, I tried to delete the D: drive, and it worked. I tried once again to delete the C: drive to no prevail. So, I thought I'd restart the PC to see if it would change.And then it happened. It didn't start up with the XP setup option nor does it boot Windows. It just loops inself to the Windows XP Home logo, restart, rinse and repeat.
View 10 Replies View RelatedMy current situation: C: 1.97gb/109mb free/Healthy System//xp pro installed (stupid me) D: 4.87gb/3.10gb free/Healthy Boot//xp pro installed G: 12.1gb free/Healthy/nothing on it yet. *3 are logical drives on one physical drive
I want to delete all partitions and put everything at C: and install xp on it. How am I able to this? Or do you have any of your suggestions about on how to manage the space. Last time I accidently installed xp on c, and it lagged like hell!
When I booted up I got a windows installer screen asking to put in the disc to install paint shop. Since I was on the road and did not have the disc with me and don't use Paint shop I uninstalled it. when I boot I get a screen that just says windows Installer and it is very hard to cancel it
View 5 Replies View Related