Can't Boot Normally After CPU Upgrade
Oct 4, 2008
After CPU the processor was installed I attempted to boot normally and the 1st time it worked - but Windows said "you may need to restart your computer for hardware to perform properly [paraphrasing]" so I restart...Now when I select "Windows XP Professional" attempt to boot normally it just restarts the PC. It also does this in SAFE (and SAFE with Cmd, Ntwrk Prompt, etc.) It just so happens that I use an app called TuneUp Utilities and there's an option during startup for "Windows XP Professional (TuneUp Backup)" which I tried when all else failed (Last Known Good, etc) and it boots just fine.My question is: How can I repair XP so I can boot normally? I've tried checking the disk(s) but not much help, and while there's a lot of folks offering different solutions (repair install, or god forbid- fresh install) I thought that my ability to boot through TuneUp might offer a clue as to what's ailing me.
View 14 Replies
ADVERTISEMENT
Feb 23, 2010
My 'puter upgraded itself (windows i think) and then froze. I restarted it and now after I go to F8 and try everything, like (configure to..., safe mode..etc) it just go to black screen of purgatory. I go into bios and look at it like I know wtf I am doing and leave and then back to that screen of eternal damnation. Now before I launch my CPU out of my pumpkin gun. I don't have a start up disk nor anything backed up, that's how i roll.
View 14 Replies
View Related
Sep 17, 2007
I have a Compaq SR-1200NX system that came with a 40gb drive. It was too small for all my music and apps so I installed a second drive which I then started using for files.So Drive 1 was 40 gb and Drive 2 was 80GB..I was running out of space again so I used a drive cloner to move the 40 GB drive to a 200GB Drive.Disk Management shows different according to it Drive 0 is the 80gb drive and is assigned a letter of D and Drive 1 is the 200GB drive assigned a letter of C.Both C and D have a Windows directory off of and a Program Files but the Program Files on C has more entries than the one on D.
View 2 Replies
View Related
Jan 15, 2006
I recently upgraded my System from P3 to P4, also added a new 120GB SATA Hard Drive which I kept as a Primary Master.I also attached my old 40GB IDE hard drive which is the secondary master. I had installed Windows XP Pro on the IDE HDD and now have installed the same O.S. on the new drive also. In my old system which also had two hard drives (both IDE drives) I used to get a boot option. But with the SATA + IDE combination the boot option has disappeared and it boots directly from the SATA Drive.
View 5 Replies
View Related
Mar 4, 2007
I need to reinstall my windows XP on a new system that i am building. My old system has died and I do have a Boot CD from my "UPGRADE" version from the OLD machine. Will i be able to load the upgrade version (i have my XP Disk) from the old machine on my new machine starting with the Boot CD?
View 6 Replies
View Related
Jun 7, 2008
I recently upgraded my laptop from XP Home to XP Pro. But, I absent-mindedly started to install by booting from the CD like I was doing a fresh install/reformat rather than doing it from inside the OS to do an upgrade. I caught myself, however and restarted without the CD and upgraded Windows from inside Windows. It worked, but now when I boot my computer, it gives me two options to choose from: "Windows XP Home Edition" or "Windows XP Professional Setup." When I pick the Home option, the computer boots up fine and goes to Windows.
However, when I go to Start>Control Panel>System, it shows that I have XP Pro even though I chose the XP Home option at boot. If I choose the XP Pro Setup option, it asks for the SP2 CD, even though the OS is bundled with SP2 on the same CD. I hit Enter, and it keeps asking for the SP2 CD even though the CD is in there. I tried to go to the Disk Management screen and delete the XP Pro Setup partition (which was only 1Gb), but that didn't work. So, I figured that boot.ini was still confused as to what to boot to.
View 1 Replies
View Related
Sep 2, 2008
The first thing is I keep getting a 'Windows Installer' box popping up which says 'preparing to install' when I check my Hotmail emails. This problem began after I had a windows update which turned out to be an upgrade to Service Pack 3, last week. As soon as I've clicked cancel on the Windows Installer box, I get an alert from ZoneAlarm saying Windows Messenger is requesting to access the internet.
The first time it happened I just let the installer do what it was trying to as I thought the service pack upgrade had made changes to some settings. But then it happened again as soon as I opened the next email (I only open emails from people who I know like my close friends or family by the way). So I'm presuming there's a problem somewhere?
View 2 Replies
View Related
Feb 13, 2007
just ordered a new pc that is on its way pre loaded with WIN XP PRO SP2. It also come with a free VISTA BUSSINES upgrade. I want to set up a dual boot system when i get my VISTA disk. should i use partition magic and set up a new partition for vista or is there a better way of doing this
View 2 Replies
View Related
Nov 18, 2006
me how much memory i can install on my pc and also what size sticks i should buy
Windows XP Home Edition Service Pack 1 (build 2600) Compaq Presario 5405EA 470032-640 MODEL1
System Serial Number: 4D23KQNTB02G
Enclosure Type: Mini-Tower
Processor a Main Circuit Board b
1.40 gigahertz AMD Athlon XP
128 kilobyte primary memory cache
256 kilobyte secondary memory cache Board: Compaq 073Ch
View 2 Replies
View Related
Nov 11, 2006
I am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
View 1 Replies
View Related
Feb 20, 2009
I have the current 32 bit version of XP Pro.
Can I do an upgrade to the 64 bit version of xp, - or do I have to do a clean install of the OS and reinstall all the software from scratch to upgrade?
View 2 Replies
View Related
Mar 12, 2009
Can I continue to use my existing XP Home with upgraded HW (i7). Is the MS OS married to the old CPU & MB or will a phone call get the reinstall running?
View 3 Replies
View Related
Jun 30, 2005
On my old comp. I tried to swap P2 350/512 100/2.0V S1 to P2 450/512 2.0V including heat sink and fan.After booting the screen was black with nothing on it , when I removed CPUand booted without any CPU in I had the same result.Reinstalled the P2 350 CPU and everything works fine. P2 450 was taken out from working comp.It looks like both CPU's have slot1 connection and fitted well in the socked.
View 4 Replies
View Related
Oct 2, 2005
Microsoft has advised that there will be a SP3 upgrade for Windows XP, but it will not be released until after Windows Vista is released. Internet Explorer 7.0 will not be part of the SP3 upgrade. It will be made available separately and will be supported by SP3.
View 13 Replies
View Related
Oct 16, 2006
I'm currently using windows xp pro. When I install SP2, do I need to backup all the files or is it a easy convenient installation?I mainly use Mozilla but someone else uses IE for one of those online games.
View 3 Replies
View Related
Jan 3, 2008
Should I stay with windows xp sp2 or upgrade to sp3.
View 8 Replies
View Related
May 27, 2008
I want to delete my old OS. It had NT, but i put XP Professional on it now. NT is located on my C drive, while XP is located on my E drive. Can i just delete the windows file on my C drive to get rid of it or what should I do?
View 1 Replies
View Related
Sep 23, 2009
Can I update frome windows home to xp pro with a retail ver. of xp pro or do I need an upgrade
View 14 Replies
View Related
Jun 17, 2005
so I've found somewhere that sells Windows XP for a reasonable price as an OEM. Now I've been told that that means I have to install from a completely blank harddrive but my PC is around 3-5 years old and my friend says that it might not be compatable with XP. is there any way I can tell as I don't want to buy WinXP only to find it messes up my PC.
View 9 Replies
View Related
Jul 25, 2009
I bought a computer last year with XP. I read today that since April there has been no support for XP and the suggestion was to upgrade to 7. I read the instructions and it's way too complicated for me. Then I read that 7 users can downgrade to XP.I don't get it.I just would like to know: Can I safely stay with XP for a couple of years?
View 9 Replies
View Related
Aug 9, 2005
I have a friend that wants to go from Windows ME to Windows XP Home Edition.
Does she have to buy the Windows XP full version? Or just the Windows XP Home
Edition Upgrade?
View 18 Replies
View Related
Jan 20, 2007
i currently have windows 2000 pro
and i am going to buy winxp pro soon, but i have a few questions..
1, can i do an in place upgrade? without losing my settings?
2, will upgrading affect my cable modem settings?
3,do i need to delete anything or just keep everything the same..
4,is this a complicated task? and do i have the right system riquirement
View 14 Replies
View Related
Apr 1, 2007
Hello everyone, i have a psp and i have version 2.81.I know this is illegal but i need to know how to upgrade it to version3.03.
View 19 Replies
View Related
Feb 16, 2006
Should invest in Windows XP 64 or not. Would it improve my performance (I have an amd64 3200+) and if I would have to back up everything i want to keep on there. And would I be better off if I just waited for vista?
View 4 Replies
View Related
Jan 1, 2007
WMP11 not working sometimes. Is this true? WMP10 is wanting me to upgrade but I'm not sure if I should. Can I go back to WMP10 if I upgrade and don't like it?
View 8 Replies
View Related
May 25, 2007
I have a computer with Windows 2000 Pro on it and I wanted to upgrade it to Windows XP Pro using an unused Windows XP Pro CD/license (Version 2002, it says) I have. However, when I stuck in the CD and selected "Install XP Pro," it told me "Windows XP Setup does not support upgrading from Microsoft Windows 2000 Professional to Microsoft Windows XP Professional."
So it will only let me do a clean install. Is this because I have an OEM CD meant for a new computer? I thought you could upgrade (rather than re-install) to XP from any genuine XP CD?
View 6 Replies
View Related
Apr 24, 2006
my laptop is nearly out of disc space can someone tell me how i can upgrade it the specs are windows xp home edition hi grade
View 12 Replies
View Related
May 2, 2007
My computer is 2 years old and after adding many games for the grandkids my computer has started slowing down. I now have 512MB of memory would it speed up my computer to add memory? If so how much should I add and how do I do this? Is there a site that shows step by step instructions?
Any help would be greatly appreciated.
Cybernana
View 5 Replies
View Related
Apr 15, 2005
I was given an old Gateway laptop computer with a 400 MHz Pentium processor and 256 kb of RAM, running Windows 98SE. I decided to upgrade it to Windows XP Home. The upgrade starts out fine, it checks the system, gives no error messages, and then begins to copy files. The hard drive and CD indicator lights flicker to indicate files are being copied, and there's the dotted scroll bar that scrolls from left to right on the screen to show you that there's activity going on. the hard drive and CD indicator lights stop flickering, it seems that files are no longer being copied from the CD to the hard drive. However, the dotted scroll bar on the screen keeps on scrolling from left to right. I have left it doing this for several hours; that scroll bar keeps on scrolling, but the installation process stops. The system doesn't hang, the file copying just stops. Win XP is never installed, and after reboot it reverts back to Win 98SE.
Instead of an upgrade, I tried wiping the hard drive, reformatting, and doing a clean install of XP, but it doesn't help. It gets to the same point in the setup, and just stops copying files. No error messages or any indication that anything is wrong. I have tried installing Win XP on at least 10 different occasions, but no success.
View 2 Replies
View Related
May 16, 2006
I want to upgrade the computers at my business in derbyshire, UK. I want to upgrade two office PC'S to XP. They both meet miniumum specs but how much do i need to pay to get the software legally and where would i get it from?
View 6 Replies
View Related
Nov 5, 2009
I upgraded an emachines t2542 from xp home to pro. Now I can't fix the resoluyion past 4 bits. Did the advanced settings, but all that is listed is "default monitpr" with no option to click on 'properties'. Went into device manager and there is no 'display' tab. The only items with ???? on them are an audio and a 'vga' device. I tried to update driver for vga, but it says it cannot be found even though I have the HP 17vs disk in.
View 2 Replies
View Related
