Computer won't boot up. Goes to a windows error screen and won't let us boot up on safe or any other mode. System won't allow us to boot from any system disk. Is there any help other than taking it to a professional?
View 9 RepliesI've spent the last two months just trying to get Windows to operate correctly on a new Mac. Unbelievable! I've re-installed XP SP2 too many times to count, finally had it up and thought it was running fine for the last week, then I went over to the Mac OS tried accessing windows through boot camp, it shut down the Mac OS, then when I tried to go back to boot Windows directly, I received the damning <windows root> system32hal.dll file is missing or corrupt - again.
View 1 Replies View RelatedMy PC (XP SP3) suffered a rough recovery from a malware infection. I.e., certain services (like Print Spooler) no longer run.The malware is gone, but when I go into Computer Management and try to restart the services (like Print Spooler), an error message pops up saying "Cannot start service in Safe Mode"However, it is definitely not in safe mode. So, there must be some internal flag that says otherwise. Restarting XP in safe mode and then in normal mode doesn't un-stick it.
View 6 Replies View RelatedI was having problems with Norton Live Update and requested assistance. Everything that they instructed me to do failed and finally they asked me to remove Live Update in "Safe Mode with networking" and then reinstall off the web. I do not work on a network, by the way. I only have Broadband at my home and I don't think that counts as a network, anyway. Well, I did what was asked of me and since that day the computer has been stuck in Safe Mode. It will not use any of the restore points that I have chosen when it asks "yes" or "no" to restoring to an earlier date in order to restart in Normal Mode. By the way, I am using my other Compaq laptop to send this message - even though the Toshiba can send and receive on broadband, even though it's stuck in Safe Mode.
I was having trouble with "Word" on this computer but that problem is insignificant to the one I now have with the Toshiba. Is there a remedy or am I bound to have to use the Recovery Disc that came with the machine when I bought it? Symantec have simply said that they cannot help me if it's stuck in Safe Mode. Brilliant. They are more worried about the Live Update problem than the fact that I am stuck in Safe Mode.
I have a malware issue on a computer. I was in the process of fixing it when I tried to restart the computer in safe mode. The typical press F8 at the beginning of bootup did not work so I went to msconfig and told it to boot in safe mode. When I restarted, it did go into safe mode like I had hoped. However, I was not thinking ahead very far. This computer is connected to a domain so the user name and password I was using was from the network active directory. When going into safemode, obviously that will not get me logged in to the computer. The problem is that I did not load the OS originally and never logged in locally so I do not know a user name or password to allow me to log in. So now I am stuck with the computer booting in safe mode and no way to change it. Do you know of any ways to get past this?
View 6 Replies View RelatedAfter running virus scans in Safe mode I attempted to restart into Normal mode but the computer just hung at the boot screen indefinately. I finally forced it off. When I switched it back on it gave me the usual black screen saying "Windows did not shut down successfully" and instructed me to use the arrow keys to choose how to start windows, otherwise it would load the "last known successful configuration"
However at this screen only the arrow keys do not react, making it impossible for me to select Safe mode, and although Safe mode was actually the last successful configuration, it proceeds to attempt to load Normal mode and stops at the login screen every time
I've been trying to fix this computer for the last 8 hours and I can't figure it out. I've narrowed it down to a system corruption, it's not hard, viruses or spyware, it's not anything but a corrupted windows installation.I will only image the drive at a last resort. I might just buy a second hard drive and install the OS and copy over the goods. Either way, I don't want to go though all that work. I know I can fix this.I had it working at one point, I did a Windows XP Setup into Repair mode, checked the disk and even went as far as created a second boot.ini - Just to eliminate a factor, that didn't work.What appeared to work was to "repair" the "corrupted windows installation" 3 or 4 times, and then do an "upgrade" and reactivate windows. I managed to get to a desktop, but then things just went downhill.
The icons where weird, and my "theme" was reset, and various other things. I created a new user in hope to start over, I was aimed at uninstalling things such as the vista transformation pack, etc.. Did a Windows Update, changed a few Driver letters so shortcuts worked, and then tried to "repair" the transofmation pack so i could uninstall it. I also did a Windows Update.Then I reboot, and my nightmare starts over again. Now I can't even get the damn upgrade/repair to work and it wont boot past mup.sys. If I just knew what file was corrupted or what was making the system hang I could rename/restore it and well you get the idea..Please HELP - I need this computer, it's got lots of client data and bleh bleh on it. I'm completely out of ideas and my mind is exhausted.
I don't really know where i should start so.well earlier today i installed a second hd in my computer to pull so files off of it for my sister and my mom, but when i got it working it said accsess was denied to there stuff i went on my moms computer to check if i hade already backed up there stuff of the old comp, so i go into her document to see if i could find the old documents and when i start scrolling through them the window freezes...so i leave it for a minute and while i'm waiting i close some other programs one of which was mozilla which was also frozen.I go back to the my document window and its still frozen.
I try to close it and of course its not responding so i click end now and it made the every thing disappear like the task bar and all the icons on the desktop are missing...so i wait and see if any thing will reappear and nothing does so i restart it and it starts booting up..the windows logo comes up and the little bars only gets half way across then it restarts and brings me to that menu where you can choose save mode or start normally and all that and no matter what i pick the comp just restarts and bring me back to the menu.
I returned home the other day after shutting my computer down for the first time in a couple weeks. I turned it on it got to the Windows log on and shut down and constantly reboots over and over. I tried chkdsk /r I couldnt get /f to work by itself Last know configure didnt work I foolishly tried this LINK Then I read in another forum that it could be a bad driver. I do recall when I was able to get in safe mode an error for my printer came up so I want to get in safe mode and try to uninstall it. but now safe mode won't work and after doing that part in the link its says I have 2 O/s to choose from?
View 2 Replies View RelatedI am stuck in the Windows Classic mode. I clicked Run; services.msc and discovered that Themes was 'Stopped'. If I click Start, this sorts the problem, allowing me to go back to my Royale theme I have on Windows XP. However, on restarting the PC, the problem occurs again, and I have to repeat the procedure to sort it. Startup Type is set to 'Automatic'.
View 12 Replies View RelatedI have a Sony Vaio BZ-570, I had some malware to remove so I went to try and boot in safe mode. When I get to the blue login screen the mouse is just stuck in the middle of the screen and won't move. I can't click anything to get to msconfig to reset it and even if I push F8 in the beginning and select "Normal Mode" it still goes into safe mode.
View 6 Replies View RelatedI'm working on an IBM ThinkCenter Desktop PC.On bootup, it goes through the IBM logo and then the Windows logo flashes quickly and then is gone and then the Safe Mode screen appears. No matter which option I choose from the Safe Mode screen, the result is the same: The Windows logo flashes quickly and then the system reboots, and then the IBM logo and then the Safe Mode Screen.I have tried running the repair module from an o/s disk I have here, but when I get to the c: prompt and type "dir" it says "error occurred during directory enumeration".There is only one partition.I have a copy of UBCD4WIN, if that would be helpful in diagnosing the problem.I do not have the o/s disk that belongs to this computer.
View 2 Replies View RelatedI've been trying over 2 to 3 weeks to solve this issue. Hopefully, THG can offer a distinct solution that works.Problem: My Windows XP Home Edition is "Stuck" in the "Extended Desktop" mode. I have only 1 monitor (an Acer H233H). Acer offers NO support; just a run-around. I tried to find out from them if there's a problem with their drivers.I noticed the problem recently when updating 'security' fixes, etc. from Microsoft.Normally, I run my system in 1280x800dpi. It used to work fine that way.By right-clicking the desktop and choosing a .jpg graphic, I could perform each of the 3 display options with no problem; (stretch, center, tile). However, now the following happens. When I choose "Center," the graphic is displayed on my monitor 'centered' in the virtual 1280x800 area. In other words, it is located toward the right side and lower right portion of my monitor's physical display area.
The real problem is when I choose to "Stretch" the same image, it stretches it to the full 1280x800 size, and (NOT TO MY PHYSICAL SCREEN SIZE)!It did not use to work that way. It used to always center and/or stretch to fit my physical screen size, even while in 1920x1080 resolution.HOW DO I GET IT BACK TO NORMAL?
* I've updated my ATI drivers w/CCC.
* I've updated my Acer monitor drivers to their latest offering.
* I've reverted back to older ATI drivers versions to test with, but that didn't work either.
Note: the only thing that DID WORK (more or less) was when I used a tool called "System Tweaker" (by Uniblue) and had it FORCE WINDOWS TO USE CLASSIC MODE. The display worked perfectly, but I began getting "Windows.EXE" critical errors, Memory location Errors, etc.
So im stuck in safe mode, but with some extra problems.My screen has some kind of problem with my graphics card i believe, and when i start my computer it always has to change the resolution.This wasn't a problem at all until now, I recently tried to get into safe mode to check something, And i used the way with msconfig.
Now when i restart my computer it goes straight to safe mode without changing my screen resolution, leaving my screen pitch black.So is there any way to get out of safe mode with this problem? Or can i fix the screen?My computer has been running into problems all the time this past month.EDIT: I just found some thing out, For somereason my mouse and keybored aren't working now.So I'd bet there no chance i'd be able to fix my computer?
My desktop is stuck on an infinite startup loop, I can see the standards Windows starting screen then there is a quick BSOD flash and the computer restarts and does the same thing - lucky I have a spare old laptop which will allow me to jump onto this site. Safe mode options do not work I tried the Windows recovery console - typing 'R' booting from the CD but then I get stuck at the console black screen not knowing what DOS commands I should be pushing. I tried goign the other way and choosing to install XP but then I get a message saying C: isn;t configured and will need to format to continue.
View 4 Replies View RelatedMy main pc is stuck in a boot cycle giving me the black screen with options to start in safe mode etc etc and when selecting one of those options it reboots to the same point. When I press return the system tries to start it attempts it, clicks then goes back to boot cycle. The Windows XP system disk won't cut in like it should so I cannot gain control of the pc.
System is a Dell, 2years old and has had various viruses despite having the usual protection. I am currently using my old trusty Advent Pentium 3 for this message (which has never had the same degree of virus prob's curiously). After the first virus Dell talked me through using Ghost - brilliant. Within a couple of days it was hit again and usinng Spybot got rid of the virus but PC kept displaying the message rundll.dll file damaged. So I used XP Recovery seemingly with no problem only to find it won't reboot.
An infinite loop it seems. i was trying to start my pc in safe mode, to delete a .exe file from C:WindowsSystem32 which was suggested by a post to fix the "windows not genuine problem". To be able to do that, i ran msconfig and selected /safeboot under BOOT.INI tab. now everytime i try to reboot my pc it asks me to select an operating system (windows xp pro/microsft windows) if i select windows xp then it asks me to select a startup mode (safe/normal/last successful) and then no matter what i select it will reboot it self, and do the same again. If i select microsoft windows (instead of xp) then it shows MS Windows 98 screen and then goes into DOS prompt. from what i have read in some of the threads is that, i have a virus which is preventing my pc to boot in to safe mode, and because i have selected /safeboot from msconfig windows will only boot in safe mode, meaning i am stuck. the workaround these threads were suggesting was to find the boot.ini file and rename it to something else, which would fix the problem, because this file holds the info about in which mode your pc should boot. i tried to rename this file from command prompt (i cant get into windows, thats why), using "ren c:oot.ini boot.ini" but it says file name invalid. i think this is because its a hidden file. then i tried "attrib -h boot.ini", but it says attrib cannot be used in DOS mode.
View 10 Replies View RelatedI am new here and was not able to find any thing similar to my problem. I recently installed some drivers to work with my logitech mx900 wireless mouse, I just have the mouse itself and a seperate bluetooth reciever. I could not figure out how to get it to work without connecting it every time I turn on the computer and un installed the program. Now my computer gets stuck after I press shutdown and in the blue screen where it says windows is shutting down
View 7 Replies View Relatedsuddenly i get windows system error..............a duplicat name exists on the network.using xp.
View 5 Replies View RelatedI get the following message when I open windows xp and some programs don't work. C:WINDOWSSYSTEM32AUTOEXEC.NT. The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application.
View 7 Replies View RelatedI have been having problems when i tried reverting from windows 7 back to Windows XP Home Edition. At first i was able to get to windows setup (Blue screen) when i had the disc and partitioned to install the XP Disc. The computer restarted and i get to "press any key to continue (with the disc)" and i do so and it says "set up is inspecting your computers hardware" and then screen turns black and nothing appears. When i take the disc out it says "Error Loading Operating System". I can't really do much of anything now. Only screen i can get to is f1 to the "bios setup utility".I have an HP a450n.. Really need help i been wanting to use XP again because windows 7 annoyed me because it lagged my games. it has ran windows xp before and worked very good as well as for the games.
View 5 Replies View RelatedWent into msconfig and set up safe boot on restart.PC will not load in safe mode or in normal mode it just keeps looping back to the same screen.I have tried all the options on the screen.Is their anyway to get back to msconfig.I have the XP setup disk.
View 11 Replies View RelatedRan smitfraud and rebooted but my computer keeps freezing both in safe mode and normal. I tried last good configuration but the same thing happened. Either just a black screen with the mouse icon or frozen on the long list.
View 14 Replies View RelatedI am at a internet cafe and have 55 mins left so i'll be quick my laptop starts up and then before it gets to the start up screen the computer won't carry on even in all other modes and even safe mode. This morning i think some sort of virus or something came on my computer when i saved a smilies in msn, but then my friend told me about it afterwards so i deleted it then.
View 10 Replies View RelatedA friend of mine gave me an HP Pavilion ze4400. It had Windows XP installed on it when he gave it to me. I moved out of the area and forgot to take the XP CD with me. I was having problems with picking up wireless networks using my USB wireless adapter. Uninstalling and reinstalling the program for the adapter didn't fix anything, in fact, it made it worse. So I thought I would try using an XP CD to correct the problems that way. I had no idea that XP CDs weren't all the same.I put the CD that I had for my IBM laptop in the HP and it started to install. After about 10 minutes or so, I got a "Fatal Error":"An error has been encountered that prevents Setup from continuing.One of the components that Windows needs to continue setup could not be installed.The operation was canceled by the user.Press OK to view the Setup log file"The Systel Setup Log:"Error:The signature for Windows XP Home Edition Upgrade is invalid. The error code is 426.The service has not been started.
View 8 Replies View RelatedWhen I'm trying to start up Windows XP Home Edition I receive an error box without an error message, I can just click YES or NO. Neither option let's me continue. When starting up in Safe Mode, everything works fine.
View 2 Replies View RelatedI have a friend's laptop that boots up and goes to the XP splash screen with the dots moving and they just keep going and the laptop does nothing.
View 3 Replies View Relatedmy system gets stuck at the Windows XP screen with the blue bar scrolling across. I am able to get into safe mode, but restoring didn't work.
View 14 Replies View RelatedIf I switch my laptop on he starts but when I get my main screen I can't do anything.I even can't open start to turn it off. Nothing works.
View 6 Replies View RelatedI just moved in to college and set up my computer, but due to limited space didn't bring my second monitor. Now my aim, and ventrilo windows are still on the other monitor but no way to get them to the current monitor for use.
View 2 Replies View RelatedI just bought toshiba M70 1.7 512 40 GB with XP SP2 Home. It is just after few days that OS is not working well. Main problemis taht many times when I shut down after using some applications or internet, it does not respond. System hangs and it takes sometimes 5 to 10 minutes to shutdown after repeated commands for that. Many programmes are shows as NOT RESPONDING and some times even ccApp is shown not responding. Even once I had to remove battery to make it shut down by cutting off power supply. The main problem is on shutdown although system does hang up some times during use. I put following software in it.
MS antispyware, Spybot, bazooka, Clipboard Recorder, Free online meter, DU Traffic. MSN and Yahoo messenger, Google Talk, EUALyzer, 7-Zip, WinRAR trial, Opera, Spyware blaster, Google desktop sarch,Firefox with many extensions( flat style, popup master, popup sound, yes popup, tabbed browsing prefrences, colored tabs, no script, down them all, flashgot, dictionary tool tip, answers, google toolbar, yahoo toolbar, google preview, google safe browsing, netcraft toolbar,site advisor, IE tab, IE view, Tab mix plus, Text size toolbar, Google preview,A Timetracker, page zoom, and some themes) IE has sitehound toolbar, google and yahoo toolbar, site advisor, and clodmark toolbar. Don,t think this lot of stuff is the cause as i put almost same stuff on my friends desktop that ic celeron and it,s fine, no such problem. Also i downloaded some Icons from internet and used them to change Icons of some folders and desktop shortcut items via Properties Tab...............