System Stuck In Safe Mode / Print Spooler Wont Run?
Dec 14, 2009
My PC (XP SP3) suffered a rough recovery from a malware infection. I.e., certain services (like Print Spooler) no longer run.The malware is gone, but when I go into Computer Management and try to restart the services (like Print Spooler), an error message pops up saying "Cannot start service in Safe Mode"However, it is definitely not in safe mode. So, there must be some internal flag that says otherwise. Restarting XP in safe mode and then in normal mode doesn't un-stick it.
View 6 Replies
ADVERTISEMENT
Feb 6, 2008
I've spent the last two months just trying to get Windows to operate correctly on a new Mac. Unbelievable! I've re-installed XP SP2 too many times to count, finally had it up and thought it was running fine for the last week, then I went over to the Mac OS tried accessing windows through boot camp, it shut down the Mac OS, then when I tried to go back to boot Windows directly, I received the damning <windows root> system32hal.dll file is missing or corrupt - again.
View 1 Replies
View Related
Jul 21, 2006
I was having problems with Norton Live Update and requested assistance. Everything that they instructed me to do failed and finally they asked me to remove Live Update in "Safe Mode with networking" and then reinstall off the web. I do not work on a network, by the way. I only have Broadband at my home and I don't think that counts as a network, anyway. Well, I did what was asked of me and since that day the computer has been stuck in Safe Mode. It will not use any of the restore points that I have chosen when it asks "yes" or "no" to restoring to an earlier date in order to restart in Normal Mode. By the way, I am using my other Compaq laptop to send this message - even though the Toshiba can send and receive on broadband, even though it's stuck in Safe Mode.
I was having trouble with "Word" on this computer but that problem is insignificant to the one I now have with the Toshiba. Is there a remedy or am I bound to have to use the Recovery Disc that came with the machine when I bought it? Symantec have simply said that they cannot help me if it's stuck in Safe Mode. Brilliant. They are more worried about the Live Update problem than the fact that I am stuck in Safe Mode.
View 3 Replies
View Related
Sep 27, 2007
I have a malware issue on a computer. I was in the process of fixing it when I tried to restart the computer in safe mode. The typical press F8 at the beginning of bootup did not work so I went to msconfig and told it to boot in safe mode. When I restarted, it did go into safe mode like I had hoped. However, I was not thinking ahead very far. This computer is connected to a domain so the user name and password I was using was from the network active directory. When going into safemode, obviously that will not get me logged in to the computer. The problem is that I did not load the OS originally and never logged in locally so I do not know a user name or password to allow me to log in. So now I am stuck with the computer booting in safe mode and no way to change it. Do you know of any ways to get past this?
View 6 Replies
View Related
Dec 15, 2004
After running virus scans in Safe mode I attempted to restart into Normal mode but the computer just hung at the boot screen indefinately. I finally forced it off. When I switched it back on it gave me the usual black screen saying "Windows did not shut down successfully" and instructed me to use the arrow keys to choose how to start windows, otherwise it would load the "last known successful configuration"
However at this screen only the arrow keys do not react, making it impossible for me to select Safe mode, and although Safe mode was actually the last successful configuration, it proceeds to attempt to load Normal mode and stops at the login screen every time
View 5 Replies
View Related
Feb 16, 2008
I've been trying to fix this computer for the last 8 hours and I can't figure it out. I've narrowed it down to a system corruption, it's not hard, viruses or spyware, it's not anything but a corrupted windows installation.I will only image the drive at a last resort. I might just buy a second hard drive and install the OS and copy over the goods. Either way, I don't want to go though all that work. I know I can fix this.I had it working at one point, I did a Windows XP Setup into Repair mode, checked the disk and even went as far as created a second boot.ini - Just to eliminate a factor, that didn't work.What appeared to work was to "repair" the "corrupted windows installation" 3 or 4 times, and then do an "upgrade" and reactivate windows. I managed to get to a desktop, but then things just went downhill.
The icons where weird, and my "theme" was reset, and various other things. I created a new user in hope to start over, I was aimed at uninstalling things such as the vista transformation pack, etc.. Did a Windows Update, changed a few Driver letters so shortcuts worked, and then tried to "repair" the transofmation pack so i could uninstall it. I also did a Windows Update.Then I reboot, and my nightmare starts over again. Now I can't even get the damn upgrade/repair to work and it wont boot past mup.sys. If I just knew what file was corrupted or what was making the system hang I could rename/restore it and well you get the idea..Please HELP - I need this computer, it's got lots of client data and bleh bleh on it. I'm completely out of ideas and my mind is exhausted.
View 2 Replies
View Related
Nov 9, 2007
I returned home the other day after shutting my computer down for the first time in a couple weeks. I turned it on it got to the Windows log on and shut down and constantly reboots over and over. I tried chkdsk /r I couldnt get /f to work by itself Last know configure didnt work I foolishly tried this LINK Then I read in another forum that it could be a bad driver. I do recall when I was able to get in safe mode an error for my printer came up so I want to get in safe mode and try to uninstall it. but now safe mode won't work and after doing that part in the link its says I have 2 O/s to choose from?
View 2 Replies
View Related
Mar 23, 2010
I have a Sony Vaio BZ-570, I had some malware to remove so I went to try and boot in safe mode. When I get to the blue login screen the mouse is just stuck in the middle of the screen and won't move. I can't click anything to get to msconfig to reset it and even if I push F8 in the beginning and select "Normal Mode" it still goes into safe mode.
View 6 Replies
View Related
Aug 21, 2007
I'm working on an IBM ThinkCenter Desktop PC.On bootup, it goes through the IBM logo and then the Windows logo flashes quickly and then is gone and then the Safe Mode screen appears. No matter which option I choose from the Safe Mode screen, the result is the same: The Windows logo flashes quickly and then the system reboots, and then the IBM logo and then the Safe Mode Screen.I have tried running the repair module from an o/s disk I have here, but when I get to the c: prompt and type "dir" it says "error occurred during directory enumeration".There is only one partition.I have a copy of UBCD4WIN, if that would be helpful in diagnosing the problem.I do not have the o/s disk that belongs to this computer.
View 2 Replies
View Related
Aug 4, 2008
So im stuck in safe mode, but with some extra problems.My screen has some kind of problem with my graphics card i believe, and when i start my computer it always has to change the resolution.This wasn't a problem at all until now, I recently tried to get into safe mode to check something, And i used the way with msconfig.
Now when i restart my computer it goes straight to safe mode without changing my screen resolution, leaving my screen pitch black.So is there any way to get out of safe mode with this problem? Or can i fix the screen?My computer has been running into problems all the time this past month.EDIT: I just found some thing out, For somereason my mouse and keybored aren't working now.So I'd bet there no chance i'd be able to fix my computer?
View 9 Replies
View Related
Mar 9, 2010
My desktop is stuck on an infinite startup loop, I can see the standards Windows starting screen then there is a quick BSOD flash and the computer restarts and does the same thing - lucky I have a spare old laptop which will allow me to jump onto this site. Safe mode options do not work I tried the Windows recovery console - typing 'R' booting from the CD but then I get stuck at the console black screen not knowing what DOS commands I should be pushing. I tried goign the other way and choosing to install XP but then I get a message saying C: isn;t configured and will need to format to continue.
View 4 Replies
View Related
Aug 25, 2008
My main pc is stuck in a boot cycle giving me the black screen with options to start in safe mode etc etc and when selecting one of those options it reboots to the same point. When I press return the system tries to start it attempts it, clicks then goes back to boot cycle. The Windows XP system disk won't cut in like it should so I cannot gain control of the pc.
System is a Dell, 2years old and has had various viruses despite having the usual protection. I am currently using my old trusty Advent Pentium 3 for this message (which has never had the same degree of virus prob's curiously). After the first virus Dell talked me through using Ghost - brilliant. Within a couple of days it was hit again and usinng Spybot got rid of the virus but PC kept displaying the message rundll.dll file damaged. So I used XP Recovery seemingly with no problem only to find it won't reboot.
View 5 Replies
View Related
Jan 29, 2007
Print spooler stopped. Tried to correct it by going to Start>Run>services.msc>Print Spooler.. startup type set to Automatic>Service Status set to Stopped>pressed START and got error message as follows, Error 1068 The dependancy service or group failed to start.Windows XP sp2, 512 ram. Trying to install Lexmark x3450 printer but can not change setting on print spooler to start.
View 5 Replies
View Related
Jan 13, 2008
I tried to install a printer HP in my computer,but when try to install a print disc my computer show: The print spooler is not running.
View 2 Replies
View Related
Aug 1, 2008
XP Pro every thing works great except it will not let me start print spooler.
View 1 Replies
View Related
Aug 1, 2005
WIN XP SP1 with a brother mfc attached. has been operating normally, now suddenly cannot print, or do anything other than view installed printers in control panel-printers. Message box says 'print spooler is not installed'.Can i reinstall the print server without a full WIN XP install?
View 1 Replies
View Related
Jul 7, 2007
I have a Gateway PC. I have a Lexmark 7170 printer. When I try to add a printer, I get a message that says the printer spooler service is not running. I tried run->services.msc, selecting printer spooler, and setting startup type to automatic. I then selected dependencies, and got a message that says this service depends on the following: LexBce Server, Remote Procedure Call. What else can I try? I should say that I just had work done on my PC and the Computer Repair Place left it like this.
View 8 Replies
View Related
Jul 13, 2009
I need the most complex answer one can come up with for "how to restart the print spooler service".
I have someone who thinks they know stuff asking how I cleared her stuck document, and want to make it look very complex.
View 8 Replies
View Related
Sep 23, 2007
Im running XP Professional, SP 2, on an Intel P3 1Ghz, 512 MB of RAM.I deleted my old Lexmark printer after I installed a new HP. Now my printer wont work. I tried restarting the print spooler and nothing. I checked the dependencies and both boxes are 'GREY' (closed) and show no dependencies listed.Im thinking I deleted some files or file required to operate the spooler/printer? Or is it possobly spyware or something causing this problem? I did perform a registry cleanup after the installation of the new HP printer.
View 5 Replies
View Related
Sep 19, 2007
Im running Windows XP and my HP printer has stopped working. I get an error message regarding the print spooler not working. I go to the 'PRINTERS" folder and it shows that the re is no printer installed. Im wondering if I did something to cause this. I use the free version of Abexo Registry Cleaner as well as Zoftspy SE (purchased version) which I use daily. I have used Ad aware but I've deleted it. A short time ago I did have a Trojan (ad installer?) but my NAV deleted it. I still get messages from NAV that attempts to hijack were blocked by the NAV firewall. Also, the System restore wont work, whether I turn it off and restart it not at all.
View 8 Replies
View Related
Sep 20, 2010
I am trying to install lexmark all in one printers and keep getting message that print spooler service stopped.
View 2 Replies
View Related
Apr 12, 2005
At start of each session first doc from any app prints normally 2nd and subsequent docs stall in print queue for 2 to 3 minutes. Have gone through HP who suggest that problem is with spooler. Can't find any updates on MS sites.
View 6 Replies
View Related
Jun 1, 2005
I am running XP and have been for some time with no problems, recently my printer began playing up (saying that it wasn't able to communicate) that problem seemed to go away after a while. Since then my computer has been 'getting stuck' after it prints a document.It would print the first document but then nothing after that, i found that the print spooler was showing that the just printed job was marked in status as being deleted... however it would go away and nothing else would get printed. i played around with active processes and found that I could delete the 'deleting' process and get the printing going again.
View 2 Replies
View Related
Aug 5, 2006
When I try and open a printer I get the error message "operation could not be completed, print spooler service is not running."I've looked round the forums and tried some things. I can get the spooler service to start by starting it under admin tools, and also by typing 'net start spooler' in the command prompt. It starts up, and for a few seconds it runs and I can access my printer, but within half a minute is stops running again, and I'm back to where I was. So I am unable to print at all.
View 8 Replies
View Related
Jul 14, 2004
windows xp Home srvpk 1
dell opitlplex glx
I have an old dos app that needs to print to a hp laser 2300 have setup "net use lpt1: \computernamepname /persistant:yes changed bios settings to parllel mode to epp,ecc and ps2 setup share on printer and checked spelling type "net use" shows lpt1 -> ok turned bidirectional printing on and off tried to print directly to printer turn spooler off. deleted all printers and drivers and reinstalled from HP
prints fine from all window applications. when you try to print from the dos app with spooler off nothing. when you try to print with spooler on you can see a job go to spooler then a second job will appear and the first will delete this will loop-continue until you cancell all print jobs. after this happens once. Windows applications will not print any longer. Does the same thing as the dos app have to reboot to fix window apps.
View 7 Replies
View Related
Nov 21, 2007
I am trying to install a printer, but the Print Spooler service is not active. I have attempted to activate the Print Spooler service every way possible, but always recieve this error! Quote: Could not start the Print Spooler service on Local Computer.
Error 12: The access code is invalid.
View 4 Replies
View Related
Mar 8, 2009
Computer won't boot up. Goes to a windows error screen and won't let us boot up on safe or any other mode. System won't allow us to boot from any system disk. Is there any help other than taking it to a professional?
View 9 Replies
View Related
Oct 13, 2009
Went into msconfig and set up safe boot on restart.PC will not load in safe mode or in normal mode it just keeps looping back to the same screen.I have tried all the options on the screen.Is their anyway to get back to msconfig.I have the XP setup disk.
View 11 Replies
View Related
Sep 29, 2008
Ran smitfraud and rebooted but my computer keeps freezing both in safe mode and normal. I tried last good configuration but the same thing happened. Either just a black screen with the mouse icon or frozen on the long list.
View 14 Replies
View Related
Jan 27, 2006
My windows are stuck in large print, I have not used the magnifier. I have tried the restore it didnt help. my home page is in normal print. my email an the rest of the internet is in large print.
View 4 Replies
View Related
Oct 6, 2010
have a new virus in my computer that deleted one of my files in WINDOWSsystem32 folder, and now when I run my pc, I get an error saying that a file is missing from WINDOWSsystem32 , I want to run system recovery but it won't let me. I tried pressing almost all the F#, so I decided to run safe mode and do a system recovery from inside my windows xp, but my safe mode doesn't work ether. For safe mode I tried F8, and F5
View 4 Replies
View Related
