When I try and open a printer I get the error message "operation could not be completed, print spooler service is not running."I've looked round the forums and tried some things. I can get the spooler service to start by starting it under admin tools, and also by typing 'net start spooler' in the command prompt. It starts up, and for a few seconds it runs and I can access my printer, but within half a minute is stops running again, and I'm back to where I was. So I am unable to print at all.
Print spooler stopped. Tried to correct it by going to Start>Run>services.msc>Print Spooler.. startup type set to Automatic>Service Status set to Stopped>pressed START and got error message as follows, Error 1068 The dependancy service or group failed to start.Windows XP sp2, 512 ram. Trying to install Lexmark x3450 printer but can not change setting on print spooler to start.
WIN XP SP1 with a brother mfc attached. has been operating normally, now suddenly cannot print, or do anything other than view installed printers in control panel-printers. Message box says 'print spooler is not installed'.Can i reinstall the print server without a full WIN XP install?
I have a Gateway PC. I have a Lexmark 7170 printer. When I try to add a printer, I get a message that says the printer spooler service is not running. I tried run->services.msc, selecting printer spooler, and setting startup type to automatic. I then selected dependencies, and got a message that says this service depends on the following: LexBce Server, Remote Procedure Call. What else can I try? I should say that I just had work done on my PC and the Computer Repair Place left it like this.
Im running XP Professional, SP 2, on an Intel P3 1Ghz, 512 MB of RAM.I deleted my old Lexmark printer after I installed a new HP. Now my printer wont work. I tried restarting the print spooler and nothing. I checked the dependencies and both boxes are 'GREY' (closed) and show no dependencies listed.Im thinking I deleted some files or file required to operate the spooler/printer? Or is it possobly spyware or something causing this problem? I did perform a registry cleanup after the installation of the new HP printer.
Im running Windows XP and my HP printer has stopped working. I get an error message regarding the print spooler not working. I go to the 'PRINTERS" folder and it shows that the re is no printer installed. Im wondering if I did something to cause this. I use the free version of Abexo Registry Cleaner as well as Zoftspy SE (purchased version) which I use daily. I have used Ad aware but I've deleted it. A short time ago I did have a Trojan (ad installer?) but my NAV deleted it. I still get messages from NAV that attempts to hijack were blocked by the NAV firewall. Also, the System restore wont work, whether I turn it off and restart it not at all.
At start of each session first doc from any app prints normally 2nd and subsequent docs stall in print queue for 2 to 3 minutes. Have gone through HP who suggest that problem is with spooler. Can't find any updates on MS sites.
I am running XP and have been for some time with no problems, recently my printer began playing up (saying that it wasn't able to communicate) that problem seemed to go away after a while. Since then my computer has been 'getting stuck' after it prints a document.It would print the first document but then nothing after that, i found that the print spooler was showing that the just printed job was marked in status as being deleted... however it would go away and nothing else would get printed. i played around with active processes and found that I could delete the 'deleting' process and get the printing going again.
I have an old dos app that needs to print to a hp laser 2300 have setup "net use lpt1: \computernamepname /persistant:yes changed bios settings to parllel mode to epp,ecc and ps2 setup share on printer and checked spelling type "net use" shows lpt1 -> ok turned bidirectional printing on and off tried to print directly to printer turn spooler off. deleted all printers and drivers and reinstalled from HP
prints fine from all window applications. when you try to print from the dos app with spooler off nothing. when you try to print with spooler on you can see a job go to spooler then a second job will appear and the first will delete this will loop-continue until you cancell all print jobs. after this happens once. Windows applications will not print any longer. Does the same thing as the dos app have to reboot to fix window apps.
I am trying to install a printer, but the Print Spooler service is not active. I have attempted to activate the Print Spooler service every way possible, but always recieve this error! Quote: Could not start the Print Spooler service on Local Computer. Error 12: The access code is invalid.
I'm a tech at a college and am working on this computer that the printer spooler service won't stay started.You start up the machine and go to printers and faxes. There are none listed (of course cause the spooler isn't running) You click on add printer and it tells you that the service isn't running. So you go to run services.msc, printer spooler says it's stopped so you start it. It will then run until you try to print something or go to printers and faxes in the control panel. Basically as soon as you open the window the printer spooler service stops.Does anyone know a fix for this. Last time it happened one of my co-workers found a tool to fix it but we haven't been able to find it since and all the researching I have done leads me nowhere
My PC (XP SP3) suffered a rough recovery from a malware infection. I.e., certain services (like Print Spooler) no longer run.The malware is gone, but when I go into Computer Management and try to restart the services (like Print Spooler), an error message pops up saying "Cannot start service in Safe Mode"However, it is definitely not in safe mode. So, there must be some internal flag that says otherwise. Restarting XP in safe mode and then in normal mode doesn't un-stick it.
We are facing the problem of spooler service not working and even though started manually it keeps on stopping automatically all of our pc's with windows xp in the network.Can anybody please provide a solution to this problem?
I am running widows XP with SP2 installed and have never had problems with the 2 printers I have installed. A Lexmark X2250 & HP photosmart 7760 untill we had to take the computer in to have Norton antivirus 2005 update installed. When we got it back I found that both my printers did not work & neather of them showed up in the control panal. When I tried to print I got a message reading "Windows can not connect printer. The printer spooler is not running". I contacted the company that put Norton in & they said they touch the printers. Can anyone help me on how to correct this problem or direct me to where I can get info. on the printer spooler so I can reinstall my printers? I am very new at working on the computer be would like to learn.
First i am using xp, nobody can help me, i called the pritner manufactor, microsoft, and my computer manufactorer. for some reason the spooler service is not running. i try to start and says the depenecy services cannot be started, and i clicked on properties and these one are listed: LexBce server, and remote procedure call. the printer is all in one, and shows up on device manager, and lets me scan, i just cant print, i used to have a lexmark, and im wondering did uninstall correctly and if that s why its giving me problems...also on top of that when i click on start and try to go to help and support it tells me it cannot find the file, same thing when i click on run and type msconfig, cannot find that either. i did a system restore, and it did nothing, i p aid emachines 20 dollars for their "support".....
I cannot install any printers nor can I see any in the Printers and Faxes. I can print and they show up under printers to select from programs but because I can't see them, I am having trouble updating programs like Adobe. Adobe fails making a reference to the printers.
i am on a friends pc. hoping this will be an easy fix. using win xp. When trying to print, i receive a message that says, print spooler service is not running.
I have a USB Lexmark X73 Printer/Scanner/Copier. I use WinXP. It has been working just fine, but today when I tried to print something from Word, it said that there were no printers configured. Sure enough, every application just showed that there were no printers.I am sure that the connection is fine, because when I connect and turn on the printer, the Lexmark tray icon changes, but I am not able to print nor edit printing properties.Under Control Panel/Printers, there was nothing. Under the start menu Control Panel/Printers, there was only an Add Printer icon, but when I click on it, an error message pops up saying "Operation could not be completed." I tried to reinstall the driver, but towards the end, a message pops up saying that the printer can not function with out the Spool service running, and that I need to start the Spool service. Checking the task manager, sure enough, there wasn't a Spool task. I tried to run spool.exe and winspool.exe, but nothing happened.
i have a very irritating problem that i have had for about two months now.im running xp 64 bit with , 8500, gigabyte MB, 4 gig of ram for some reason i cannot get the spool service to run, every time i start it it shuts right back off.it is set to automatic and there are no print drivers on this machine in fact i just did a complete reload of the op system.so i was thinking that would cure the problem.it did not, i cannot get it to start up, i have searched the web high and low and i have tried everything.i just bought a new hp cp 1215 lazer printer, and it works fine on my other computers.i have two laptops that i print thru a network thru a usb hub and i use this new printer and it works great.but i could not get it to work on this desk top.as i said i did a dump and reformat of the hard drive and loaded xp 64 back on it and tried to load the printer and it could not due to print spooler not running.
I got this dell laptop running xp pro and when I try to log on I get.Unable to log you on because the netlogon service is not running on this machine.This was in safe mode.....so am I SOL? What I do? I think I may have deleted something out of the registry.I did back it up first and I was going to restore it.but I can't log on.
Got a system I'm looking at for someone I know. They have a file extension issue that I'm not familiar with. Here's what it is and what they think they did to get it that way.Currently all but a couple their shortcuts on the desktop have a .lnk extension attached to them. If you try to double click the shortcut to open the program windows tells you that it can't open the file and askes you what program to use. Here's what they were doing when they noticed this problem.They went into Windows Explorer and accessed the "tools" menu. From there they went to "folder options" and selected the "file types" tab. They clicked to create a new file extension, entered "lnk" for the extension and clicked "ok" Then they selected the new extension from the list and clicked the "advanced" option. In the resulting window they unchecked the "confirm open after download" option and clicked "ok". After going through this sequence they noticed that all of their shortcuts had been modified with this extension. Also now if you create a new shortcut it is automatically given this file extension. They tried going back to the folder options and removing the extension but that hasn't helped the problem any. Changing the name of the shortcut back to the original format doesn't help either.The system is currently running Windows XP with service pack 1.
In my Event Viewer under "system" I am getting these constant errors logged at about 12 per second with the big red X saying "Service Control Manager, ID 7001." It is happening whenever I am connected to the internet by e-mail or my browser, which is IE7.What in the world is going on?? No noticeable symptoms, except when it first started I was at Expedia.com and my browser (IE) started acting slow and weird. That was fixed when I re-started but the red error thingys are still logging 12 per second under "system" when on e-mail or the internet.
I have a DSL connection, windows says the firewall is on but it is not. I keep getting this error message whenever I try to install it. "Windows Firewall settings can't be displayed because the associated service isn't running, do you want to start the Windows Firewall/Internet Connect Sharing (ICS) Service?". I click on yes. Then I get "Windows cannot start the ICS service. I recently installed a 30 McAfee free trial and it worked fine.
I write a file in Word and then save it.Before I print it I usually go into Print Preview just to check things out.This time however it just showed me a blank box and the printer would not print.Everything was OK for a complete day and then the problem happened again - blank preview and no printing. This time switching off for 10 minutes and then back on had no effect.I have been trying most of today to correct things without success. I then copied it onto a floppy, put the floppy in my friends PC - same result as before
I previously owned a Lexmark Z25 printer and up to a certain point, it was printing ok. Then it abruptly stopped printing any pages. It sounded as if it was getting the signal from the computer, but nothing would print. Rather than buy new cartridges, which would have cost more than a new printer, I bought a Dell 720. Now, the color prints fine, but I cannot get the black to print. The cartridges are just about full with only a small amount out of the black cartridge.
My printer won't work and when I try to diagnose the situation I get message that says, "Windows cannot open Help and Supprt because a system service is not running. To fix this problem, start the service named 'Help and Support'". How do I do this?
