I'm using a fairly new install of Windows XP SP2 on my laptop.
Clicking on "New Connection Wizard", then select the "Connect to my
Workplace" option which would normally allow me to create a VPN connection,
is greyed out.
I've googled on this problem and found issues suggesting that
1. XP SP1 be re-installed (I'm upto SP2, which I've tried re-installing
without success)
2. HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionTelephony be
deleted (have tried this, rebooted, no success)
3. HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesRasManPPPEAP25
and 26 (tried this, rebooted, no success)
4. Find SR.INF and re-install (tried, rebooted, no change)
Having tried all of the above, I've had no joy at all. The VPN option in
"New Connection Wizard" remains greyed out.
The problem did appear to begin when I did a System Restore after a bad s/w
installation.
In addition - when I try to re-start the Remote Access Connection Manager
Service I receive Error 5: Access is Denied. I'm logged on as a Local
Administrator. I believe this is related.
I recently reinstalled Windows XP Home on a friends computer, but when I went to create their dialup connection to the internet, I couldn't.I went into the 'Internet Connection Wizard'. Told it that I was connecting directly to the internet. Then I told it I was going to set up the connection manually. But whenever the option comes up to setup a dial-up or broadband connection, the dial-up option is greyed out and unselectable.In device manager, it shows my modem as being fine. It's installed with no conflicts.
What is the best way to back up my favorites, music, important word/excel files, address book, pics etc. etc. I am currently running XP home edition and don't have access to the XP windows file to add the back up wizard option under system tools.
Just built a new desktop with wireless built into the motherboard. The motherboard also has 2 LAN ports, but neither is showing up in my network connections or in my device manager. There are only two network adapters that show up, the 1394 Net Adapter and a Realtek RTL8187 Wireless 802.11g 54Mbps USB 2.0 Network Adapter. I've tried creating a new connection using the new connection wizard but the LAN connection I try to create never shows up in network connections. I've tried looking for drivers that might help but I haven't found anything. Are there any steps I'm missing in setting up my LAN connections?
I want to migrate data from my old computer (98) to my new computer (XP) via serial cable. To do that I need to create a "Wizard Disk" for my old computer. I'm trying to use "File and Settings Transfer Wizard" on my new computer to create the Wizard CD, but that program doesn't recognize my CD-RW/DVD drive (E. The dropdown list used to select the output device includes choices for only F, G, H, and I, my 8-in-1 media drives. How can I get it to write to my CD on drive E?
Lately i've been battling a virus infection with a w32.spybot.worm. Thanks to symantec antivirus corporate edition (which can detect but never repair) and microsoft antispyware software i've eliminated it. Yet today a new infection popped up from a file "eraseme_12604.exe" in my system32 (i dont know how it got there). I figured I might as well enable the XP firewall to prevent new infections from happening, but when i went to the firewall settings they were set to OFF, and all options (including the ability to turn it on) were greyed out. Did the virus modify my registry somehow and how can i remidy the situation. I am running windows XP prof with sp2
I have seen this problem listed for Win98 and ME, but not for Win2000. I just updated IE to 6.0 and now the left pane in Explorer is greyed out and blank,fix for Win2000?
I am having problems with my keyboard.In device manager under the General tab the device usage box is 'greyed' out so I cannot enable my keyboard. I have a logitech mouse and keyboard and the software is installed. The mouse works fine but the keyboard..mmm frustrating.
Is Active Desktop Controls Greyed Out Ie Set As Background All Not An Option Also In Display Options Background Greyed Out So I Cannot Reset Or Restore Active Desktop Although At Boot Up My Previous Choice Of Desktop Background Shows Until The Icons Are Established Then The Screen Shows Active Desktop Has Been Turned Off Doesnt Support Do You Want To Run On This Page Tried Afew Thing Including Removing Security Programmesr
I am trying to make a flash drive bootable into wxpro. I have several format tools inclucing hp format tool. When I tried to access 98 startup disk to format my rally drive I got the message "no media". I copied the files to another area and received the same message. I then tried the format tool in xp. I cannot access the greyed out area to include msdos sys files. I have a old dos 6.0 prog that I use at work. I have been able to get the prog to work in 98. The use of a flash drive would be excellent if I can get it to work. To access/remove computer is a hassle and if I could just plug in a flash drive in would be excellent. So far I havent been able to get the drive to boot into xp.
After a recent reinstall of the os-WinXP Pro- the screensaver tab is there but all settings are greyed out. This happened once before and was able to fix it through some start-run command but can't remember or find it again. Just had to click on screensaver.exe and click enable, or something like that.
Like many I had problems with the antivirusxp virus. Using the recommended Malware program seemed to help at first, however yesterday my Internet Explorer became corrupted. When I click on LAN settings, all the boxes are greyed out. So I assume that I'll need to reinstall Internet Explorer. I've had the pc for 4 years & cannot find the installation discs. So my question is: If I download IE onto a cd & reinstall it, will this rectify my problem?
I use Windows XP SP2. Recently noticed that when I left-click on any of the icons of the Hard-disk drives and/or Devices with Removable Storage within 'My Computer', the 'Search' Option opens up by default instead of the 'Open' option, like in other folders. Likewise, when I right-click on the said icons, the 'Search' option is topmost & the 'Open' option has been relegated to second position. I would like the Search option to come first. Can't remember whether this was so from before or changed recently. I have used Norton Partition Magic 8 recently to resize my partitions.
i'm pretty sure my entire fiasco has something to do with my registry.in my display properties i only have three tabs, screen saver, appearance, settings.in folder options "show common tasks in folders" is greyed out and "single click to open" is also greyed out and other options throughout certain settings are greyed out in speech properties the apply button is greyed out and when i click on audio input to adjust the volume the microphone volume it is way down and i bring it back up and press ok and go back and its down again.a lot of my settings are reverting back shortly after i apply them. its been like this for a couple months me being too lazy to do anything about it and before all this happened my system was working perfectly fine. then one day everything changed. i'm pretty sure its not a virus or a worm but i think something is wrong with my registry.
I'm running winxp (en) on a pentium 4 machine with 512 MB RAM. Out of a sudden, my language bar on the taskbar was completely empty. in "text services and input languages" The language bar is greyed. I managed to set a key combination in order to switch back and forth beetwen French German and english. (Shift+Left Alt) is not working any more. When I run Winword (Office 2003) , the correct language is displayed in the status bar but Winword does not seem to recognize the language correctly what was the case before.
my cable is not working properly.Every 15-20 minutes my internet connection is broken even though the modem is online and there is no problem with the cable coming into my house. I have to reset the cable modem and then it works for another 10-20 minutes until the next cut. Ive had this problem before (last time i changed computers) but cant remember how it was resolved. I already talked to my ISP support but these guys are brain damaged or something and cannot even comprehend my problem and all 3 actually concluded that i had somehow contracted some killer virus immediately after connecting my computer and this virus was the root of my problems
I go into network connections, then I try to disable my lan connection and enable my wireless and bamm."Error Disabling Connection- It is not possible to disable the connection at this time. This connection may have one or more protocals that do not support Plug-and-Play".
I have tired to get rid of this bridge connection that is on my local area connection. I try to remove it with the bridge connection area and all it says is "To create a Network Bridge, you must select at least two LAN or High-Speed Internet connections that are not being used by Internet Connection Sharing." I have AT&T hig speed internet and tired talking to them and they said it was on my end, plus I spend two hours on the phone to someone who doesn't know much english and not alot about computers. So can someone please help me. The only way I can connect to the internet is through the my D-Link router which sucks
My firewall settings are greyed out and a banner says some functions controlled by group policy but I have a home computer and no network administrator. I tried resetting the firewall setting and it didnt seem to work
I got a Toshiba with windows XP.. Its an older laptop and runs slow.. which is fine for what i need it for.. It is connected through a Dlink Cable modem. Recently moved and had a DSL connection of 3 years no problems. Had to switch to cable broadband. The lights all light up solid no problem. Network cable connected to no problem. Problem : NO internet
Unplug netowkr cable from cable modem (get the network cabled unplugged in windows, so it is seing the modem or atleast talking to it)Tried using the windows xp network srtup wizard. I did that hub one (connected thourhg a hub) and i tried the direct connection (goes from modem to computer).
I've been trying to use Remote Desktop to connect from my home computer to my office network's machines. I've followed all the instructions except for the part where it talks about getting a "virtual private network connection". Not sure if I have this part done right. Not even sure if this is the problem. Is there something that needs to be set up before being able to connect from a home computer to an office machine?
Running Windows XP on my laptop. When inserting any new plug 'n play device into any of my three USB ports, the Add Hardware wizard tells me that a device intallation is already in progress and I am to wait until that installation is complete. However, there is no other device being installed. I checked my device manager to see if anything is unrecognized, but no question marks. Any ideas on how I can install a new piece of hardware (in this case a USB memory stick)?
When I try to go to safe mode, it works perfectly, till I have to log in, doesn't matter what I do after about 10 seconds it shuts down automaticly. Even if I logged in almost, it just shuts down right away after those 10 seconds. I already had this problem after a half year I had this PC (even after a few times formatting), and I have no idea why..
Someone told to run System Restore Wizard from 'Help and Support' in the start menu. But 'Help and Support' doesnt open. I click it but nothing happens. This is also since a while. The same problem with 'Search' and 'Run...'.
Does anyone know a way to fix one or both these problems? And is there another way to run a system restore?
running windows xp. purchased faz wizard(from multisource), downloaded software. continued to get error message regarding port problem. working with their support. seems to come down to ms fax wizard driver overrides new fax wizard driver. even went to dos prompt and removed ms fax driver and reinstalled software but still have ms fax driver overriding new driver. do i need to add a port? is it a driver problem? new to this, hope it makes sense.
I just recently ran in to a problem with the CD wizardof Windows XP.When I try to burn data on to a CD it keeps telling me to insert a disk into the drive, even though there is a disk in the machine.I have used other programs such as Musicmatch and HP's program called ecordnow and all work just fine. I have tried to uninstall and then reinstall the drive but to no avail.
