When trying to make a new VPN connection with XP the options about "dial-up"
and "vpn" are grey. Whats up?
1) Create new connection
2) Connect to the network at my workplace
3) now the "dial-up" and "vpn" are grey
I recently reinstalled Windows XP Home on a friends computer, but when I went
to create their dialup connection to the internet, I couldn't.I went into the 'Internet Connection Wizard'. Told it that I was connecting directly to the internet. Then I told it I was going to set up the connection manually. But whenever the option comes up to setup a dial-up or broadband connection, the dial-up option is greyed out and unselectable.In device manager, it shows my modem as being fine. It's installed with no conflicts.
I'm using a fairly new install of Windows XP SP2 on my laptop.
Clicking on "New Connection Wizard", then select the "Connect to my
Workplace" option which would normally allow me to create a VPN connection,
is greyed out.
I've googled on this problem and found issues suggesting that
1. XP SP1 be re-installed (I'm upto SP2, which I've tried re-installing
without success)
2. HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionTelephony be
deleted (have tried this, rebooted, no success)
3. HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesRasManPPPEAP25
and 26 (tried this, rebooted, no success)
4. Find SR.INF and re-install (tried, rebooted, no change)
Having tried all of the above, I've had no joy at all. The VPN option in
"New Connection Wizard" remains greyed out.
The problem did appear to begin when I did a System Restore after a bad s/w
installation.
In addition - when I try to re-start the Remote Access Connection Manager
Service I receive Error 5: Access is Denied. I'm logged on as a Local
Administrator. I believe this is related.
Just built a new desktop with wireless built into the motherboard. The motherboard also has 2 LAN ports, but neither is showing up in my network connections or in my device manager. There are only two network adapters that show up, the 1394 Net Adapter and a Realtek RTL8187 Wireless 802.11g 54Mbps USB 2.0 Network Adapter. I've tried creating a new connection using the new connection wizard but the LAN connection I try to create never shows up in network connections. I've tried looking for drivers that might help but I haven't found anything. Are there any steps I'm missing in setting up my LAN connections?
View 7 Replies View RelatedI want to migrate data from my old computer (98) to my new computer (XP) via serial cable. To do that I need to create a "Wizard Disk" for my old computer. I'm trying to use "File and Settings Transfer Wizard" on my new computer to create the Wizard CD, but that program doesn't recognize my CD-RW/DVD drive (E. The dropdown list used to select the output device includes choices for only F, G, H, and I, my 8-in-1 media drives. How can I
get it to write to my CD on drive E?
my cable is not working properly.Every 15-20 minutes my internet connection is broken even though the modem is online and there is no problem with the cable coming into my house. I have to reset the cable modem and then it works for another 10-20 minutes until the next cut. Ive had this problem before (last time i changed computers) but cant remember how it was resolved. I already talked to my ISP support but these guys are brain damaged or something and cannot even comprehend my problem and all 3 actually concluded that i had somehow contracted some killer virus immediately after connecting my computer and this virus was the root of my problems
View 14 Replies View RelatedI go into network connections, then I try to disable my lan connection and enable my wireless and bamm."Error Disabling Connection- It is not possible to disable the connection at this time. This connection may have one or more protocals that do not support Plug-and-Play".
View 9 Replies View RelatedI have tired to get rid of this bridge connection that is on my local area connection. I try to remove it with the bridge connection area and all it says is "To create a Network Bridge, you must select at least two LAN or High-Speed Internet connections that are not being used by Internet Connection Sharing." I have AT&T hig speed internet and tired talking to them and they said it was on my end, plus I spend two hours on the phone to someone who doesn't know much english and not alot about computers. So can someone please help me. The only way I can connect to the internet is through the my D-Link router which sucks
View 4 Replies View Relatedi havn't (Local Area Connection ) in network connection in my computer why ?
what I must to do to make (Local Area Connection)?
I got a Toshiba with windows XP.. Its an older laptop and runs slow.. which is fine for what i need it for.. It is connected through a Dlink Cable modem. Recently moved and had a DSL connection of 3 years no problems. Had to switch to cable broadband. The lights all light up solid no problem. Network cable connected to no problem. Problem : NO internet
Unplug netowkr cable from cable modem (get the network cabled unplugged in windows, so it is seing the modem or atleast talking to it)Tried using the windows xp network srtup wizard. I did that hub one (connected thourhg a hub) and i tried the direct connection (goes from modem to computer).
I've been trying to use Remote Desktop to connect from my home computer to my office network's machines. I've followed all the instructions except for the part where it talks about getting a "virtual private network connection". Not sure if I have this part done right. Not even sure if this is the problem. Is there something that needs to be set up before being able to connect from a home computer to an office machine?
View 3 Replies View RelatedRunning Windows XP on my laptop. When inserting any new plug 'n play device into any of my three USB ports, the Add Hardware wizard tells me that a device intallation is already in progress and I am to wait until that installation is complete. However, there is no other device being installed. I checked my device manager to see if anything is unrecognized, but no question marks. Any ideas on how I can install a new piece of hardware (in this case a USB memory stick)?
View 16 Replies View RelatedWhen I try to go to safe mode, it works perfectly, till I have to log in, doesn't matter what I do after about 10 seconds it shuts down automaticly. Even if I logged in almost, it just shuts down right away after those 10 seconds. I already had this problem after a half year I had this PC (even after a few times formatting), and I have no idea why..
Someone told to run System Restore Wizard from 'Help and Support' in the start menu. But 'Help and Support' doesnt open. I click it but nothing happens. This is also since a while. The same problem with 'Search' and 'Run...'.
Does anyone know a way to fix one or both these problems? And is there another way to run a system restore?
running windows xp. purchased faz wizard(from multisource), downloaded software. continued to get error message regarding port problem. working with their support. seems to come down to ms fax wizard driver overrides new fax wizard driver. even went to dos prompt and removed ms fax driver and reinstalled software but still have ms fax driver overriding new driver. do i need to add a port? is it a driver problem? new to this, hope it makes sense.
View 2 Replies View RelatedI just recently ran in to a problem with the CD wizardof Windows XP.When I try to burn data on to a CD it keeps telling me to insert a disk into the drive, even though there is a disk in the machine.I have used other programs such as Musicmatch and HP's program called ecordnow and all work just fine.
I have tried to uninstall and then reinstall the drive but to no avail.
When I click on add printer in Windows XP PRO nothing happens. Does anyone have a solution for this problem?
View 11 Replies View RelatedEvery time I start my computer I get the "found new hardware wizard" even though I haven't installed any new hardware. When I clicked on it to see what hardware it was talking about it told me it was Navex15 and was going to search for software for it. I canceled this, because I don't know what that is.
View 14 Replies View RelatedUsually this will start on it's own. Today that is not happening. I have verified that everything is connected correctly. Is there any other way to start this?
View 14 Replies View RelatedRunning every bl**dy time I plug in a USB mini hard drive? I've tried a system restore, searched some about autoplay- turned autoplay off and on, tried to find autoplay in GPEDIT, no joy there, irritating in that just the one USB drive does this, and it doesn't even have any pictures on it.
View 3 Replies View RelatedI seem to have "lost" the executable for the "scanner and camera wizard", which makes it easy to write digital images from my CF card to my hard drive. I know I can do some cutting and pasting to get the images there.
View 1 Replies View RelatedHow do i repair the scanner and camera wizard in windows xp home edition sp3, Preview does not work in the scanner and camera Wizard.
View 1 Replies View RelatedWhen I plug in my camera into a USB port, the Scanner and Camera wizard, which used to run, no longer runs, instead an explorer box pops up with the folder(s) on the memory stick. I can browse the memory stick, also. When I try to manually run the scanner and camera wizard, it tells me it cannot recognize the scanner or camera. Again, this was working, suddently it stopped.
View 2 Replies View RelatedI've learned now heavily about the Files and Settings Transfer Wizard. I've also learned about the USMT, which I've not yet used in practice, but learned the basics of in the .inf version. Studying that was how I was able to learn this deep into the Files and Settings Transfer Wizard. Basically, the two have similar, but not exactly the same configuration.Now here I'll post the configuration for the Files and Settings Transfer Wizard. I took what I found already there, and was adding features to it. I didn't create this from scratch, and it would've been silly to, as it's a configuration file.My issue is that whenever I'm saving settings, anytime I tell it to save something from HKEY_CURRENT_USER in the registry, it does not work. I was needing to know if anyone knows why, so I can correct it please.
View 2 Replies View RelatedWhen I bring up my start, all programs, accessories... and try to right click on windows explorer, to make a "shortcut", nothing happens.The item I right click on, blinks, but I am unable to move the item. Nor can I change the order, or create a shortcut to place on my desktop.I'm sure I caused this accidentally, but don't know how.
View 10 Replies View RelatedI have an outboard USB soundcard works fine with the generic drives on XP. However When I 1st tried to install it. I messed up on the install of the real drivers for the USB soundcard. These drivers have to be associated directly with the card on 1st try install because there is no auto loader for USB soundcard. I hit ok, at the wrong time, somewhere in the process. And now XP wont let me search for the drivers whenever I try to reinstall them by using plug and play
View 4 Replies View Relatedwhen i try to use windows xp new hardware wizard i get the following message
cannot run two device installations you can install only one device at a time
another device installation is underway when it is finished you can try this wizard againit seems to have got stuck trying to install something but not sure what any idea on how to find out what and also how to stop or reset it the ssame problem is stopping upgrading my nvidia driver from the net (other installation in progress)
im ruuning windows xp an when i first insert my sd memory card, it open a window like in picture 1.then i click on the copy picture to a folder . then another window pops up, like picture 2.then i click on next. then another window pops up. like picture 3. an when the next window open like in picture 4. its plank. but it should have folder destination . but it dont. does any body know why an how to fix it.
View 2 Replies View RelatedI have possibly a simple but annoying problem. Every time I restart my Windows XP Pro desktop the computer tries to install (unsuccessfully) a printer 2 times. During that process, the computer slows down extensively. The printer attached to the computer is installed and operating correctly. How can I stop my computer from trying to install an unknown printer?
View 4 Replies View Relatedi bought a game that need 10 gig but i partition c drivve to 20 gig only and i tried everything to get more disk space but still i got not enough.Installshield wizard doesnt let me install in E: drive which is my secondary drive.i have plenty of space there but i cant install it there,why?
View 2 Replies View RelatedI changed an IDE controller and need to reactivate Win XP Pro. When I slect the activation wizard, the screen comes up with the title bar and background but not foreground data or choices show, just the blank activation-window background.
I activated my Office 2007 weeks ago but now when I invoke the Power Point Viewer the Office 2007 activation wizard appears and the sound from the viewer is muted. How to I prevent the wizard from being falsely activated?
View 8 Replies View Related
