Unplugged Now After Boot-up / Blank Screen With Cursor
Jul 27, 2007
I am using a custom built PC with retail bought Win XP SP2 installed.The PC is about 3 months old now and has run perfectly so far with 2 hard drives and 1 install of XP on the master drive (S-ATA). I redecorated the house and this resulted in the PC being unplugged for about 2 weeks. Havin just plugged it back in and tried to start it, I am getting through the POST stage and then I just get a blank screen with a flashing line at the top left. This used to happen with boot up but disappeared after about five seconds. This one just stays flshing forever.I was wondering if anyone would have any advice for me. If I haven't given any required details please ask and I will post them ASAP.
View 7 Replies
ADVERTISEMENT
Jul 10, 2007
When I turn my computer on it goes to the blue hp logo and then to a blank screen with a blinking cursor in the top left corner. If I hit f8 when booting it gives me 2 options...f1 to setup and f2 to resume. It won't let me go into safe mode or anything. I have tried booting from the xp cd, but nothing happens. I have tried replacing the battery and that hasn't done anything. It started when trying to open a program, the computer just went blank. When trying to reboot, this mess started.Also, I just got this error message, which is new.i got it after I unplugged the computer for awhile.. warning 251: system cmos checksum bad dafalut config used
View 11 Replies
View Related
Dec 24, 2007
when he turns it on, it shows the HP logo with the F1 for Setup and such, then it goes straight to a blank screen with a cursor flashing. it's a boot sector problem. I just need to get him booted up so I can do some scans.
View 2 Replies
View Related
Jul 19, 2008
I recently tryed installing wubi linux hoping that this would be an optimum way to install ubuntu with out getting errors with my XP installation. But it seems ever since then I now can't access XP. As soon as I login I get my background and my cursor, there is no GUI. I can press Ctrl-Alt-Del to get to task manager, but I can't run anything from it. I can't safe boot, but i can safe boot with cmd. Last known config won't work, chkdsk doesn't make any difference, repair installs don't seem to make a difference and the only thing I can physically notice different is the absence of the Explorer.exe service. I checked my C drive and it's in the correct directory, it's just not starting. I booted into safe mode with cmd and ran msconfig, and explorer.exe isn't listed there either. So I am guessing there is an issue there, and I think that is the root problem; reinstalling XP is a total total last resort. I'd greatly appreciate it if anybody could help, or have any suggestions.
View 1 Replies
View Related
Jul 25, 2010
When I try to start up my machine, the Dell boot screen with the F2 and F12 options appear, but instead of moving on to the Windows XP loading screen, it simply shows a black screen with a blinking cursor in the top left. I cannot type anything with this cursor. There is clearly something wrong with the boot procedure or, I think, with my hard drive. The hard drive (160gb) is new and has been working well since February.I'm using a Dell Inspiron 9300 laptop. I've run Diagnostics with no errors, booted from XP CD to try bootcfg /rebuild, fixboot & fixmbr, and the lengthy chkdsk /r, all to no avail. I've even tried replacing two NTLDR files by copying them from the XP CD. Nothing has worked; I still have a black screen with a flashing cursor when my HDD should be loading. I've tried removing and reinserting the HDD itself, also to no avail. I haven't yet opened the case up to try to see if there's anything to clean or any botched connections, but I don't see how something like that would have happened on its own. All of my components (RAM, HDD, Video Card, Processor, etc.) seem to be recognized in the BIOS menu.
I should note that when I run chkdsk /r, the progress quickly gets to 25%, slows down and takes a while to get to 51%, and then slows down even more and takes maybe two or three hours to complete. I also notice that the progress advances to about 65% sometimes and then returns to 50% again. I've run chkdsk several times now and there's been no improvement in the startup.I realize I could simply reformat and reinstall Windows, but I have a lot of very important data and work stored on my drive that I hadn't had a chance to backup to my external drive. Please let me know if there's a way I can get the startup to work so that I can access my files again.
View 7 Replies
View Related
Dec 5, 2006
I have two HDD. In the 1st one XP and Ubuntu and in the 2nd one FC5. Suddenly the XP is not booting. As I choose XP from boot loader [I use Acronis Boot Manager] it is giving me a blank screen with the cursor blinking at the top left corner. Just that no movement, no XP logo nothing.
I tried fixmbr, fixboot and chkdsk; but in vein. sfc scannow is not supported. Fixmbr and fixboot succeeded but it is giving me the same result. I reinstalled FC5's Grub in the hdb5 [location of FC5's installation] but it does not give me boot option. I then reinstalled FC5's grub in hda1 and atleast now I can access net and look for immediate help from you. I know reinstalation is the last option but I just don't want to do that unless I do not have any more avenues left.
View 6 Replies
View Related
Aug 9, 2010
it all started when I ran Nod32 antivirus. I ran it because I had some viruses on my computer that I wanted to get rid of. After the scan there were 180 some detected objects that were quarantined or deleted. So then I restart my computer and after the windows xp logo there is just a black screen with no cursor. And after awhile the computer will just restart and try booting up again. I tried going into safe mode and safe mode with command prompt but I still get a black screen with no cursor. The last known good configuration doesn't work either. I'm pretty frustrated because I did nothing wrong. I am also having a feeling that nod32 might have quarantined some infected files that are essential for Windows Xp to boot. I also do not have any windows xp disks with me how to fix this?
View 11 Replies
View Related
Aug 4, 2008
I have an Intel DG31PR with 1 GB memory and Windows XP Home. When I turn the computer on the Intel logo and BIOS 2 settings appear then the screen goes back with a flashing cursor at the top left of the screen . I have to reboot several times before I can login. How do I stop this from happening?
View 3 Replies
View Related
Dec 15, 2004
I cannot boot my XP machine. In safe mode it also says safe mode in white text in each corner and shows windows build details at the top. I have trying going back to previous good config - same problem. A normal boot just leads to a black screen with a movable mouse arrow - no sign of a login screen. I have tried a recovery reinstall from a an XP pro CD from another computer - this took about 40 minutes and went through all the steps normally (with normal graphics displayed duting the reinstall) but after finishing the same problem is still there.
Only now the windows build info in sfae mode reports SP1 (originally didi not as the computer was supplied with XP before SP1) I am at a loss to know what to do to get the machine wordking without a refomat of the hard disk, whcih will destroy all my data, and my partners stuff too - mostly not backed up, as usual.
View 9 Replies
View Related
Jun 13, 2010
I left a MICROSOFT WORD CD in the player and shutdown, the next day I turn on the computer and the CD started up, and it has gone to black screen with cursor each time I start it now. I get 2 choices, F2 or F12. The 4 code lights on the back panel are all green indicating no problems, what can I try?
View 1 Replies
View Related
Jun 20, 2008
When i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
View 3 Replies
View Related
Jun 9, 2010
I have been having a boot up issue on my compaq presario sr1630nx. When I turn on the computer now it takes me to the boot screen where I press F2 and the little dash up in the corner flashes for a second or two...disapears...and then nothing...black screen. I then have to turn the computer off manually but when I turn the computer on again and it goes to the boot screen and I press F2 again and it takes me to the default start windows normally prompt.
I hit enter and then it boots up like normal and everything is fine with the world and my computer runs just fine until the next time I turn it off and have to turn it on again. Same routine at every boot. Was wondering if the brown out may have corrupted my boot.ini file somehow and if so how to fix it. My computer was on when the power spiked twice in a two minute period then was off for a couple of hours so it could be a hardware issue as well. I have Windows xp home edition
View 6 Replies
View Related
Apr 1, 2005
I am getting a blank screen with a white pointer when I boot up my machine. And when I try to boot up safe mode it does the same thing only with safe mode written in the four corners. Could someone please tell me what is going on.
View 3 Replies
View Related
Aug 23, 2005
I have windows xp prof running and now when i turn on the computer it boots up, goes to the logo, and then the screen goes blank. The hard drive is still working, and i can go into safemode (f8) but every time i try to startup normally the screen just goes blank, the monitor says there is no signal. I have no clue how to go about resolving this.
View 5 Replies
View Related
May 11, 2007
I have a computer I have built and upgraded several times for my step-son. The issue I am having is after startup or a reboot the computer goes through post and then I get a blank screen for 10-15 seconds. Then I get a serrated white load bar that runs the length of the screen at the bottom it takes about 3-5 minutes to load. Then I get the Windows load screen which takes about 10-15 seconds and then I get the account icons and everything is fine. I am not sure what this white load bar is from and it is really slowing down the boot times. The computer has gone through an upgrade and the issue still persists, which I expected. I upgraded the motherboard, processor, and video card.
View 2 Replies
View Related
May 9, 2005
computer that won't boot up. I have an E-Machines T2825 running Windows XP Home Ed. that crashed after loading a wireless router and System Mechanic program on it. We bought another E-Machines computer (T6212) I networked the 2 with a Linksys Wireless - G Broadband Router. After that I loaded System Mechanic5 on both computers. After running a scan on the T2825, it told me that the hard drive needed to be de-fragged so I did it. Then, few days later, the T2825 started having problems when running programs on it. It would freeze up and the only way to shut it down was to disconnect the main power. After plugging it back in and turning the power on, it froze up just trying to open IE6.
View 14 Replies
View Related
Jan 22, 2008
When I turn on my lap top, Acer Travelmate 2355LC, there are a couple of quiet clicks, then nothing. If left for about 10 minutes, it starts up normaly. Sometimes it starts normally from the beginning.It has an Intel Celron M360 processor (1.4 GHz, 400 MHz FSB, 1MB L2 cache) 40 BG HDD 256MB DDR, I've cleaned everything up. Should I try and repair? I would like to avoid reformatting if possible.
View 2 Replies
View Related
Aug 6, 2007
A friend of mine called me to his house to take a look at his gateway. All I know is that it runs Windows XP.He states that AVG antivirus prompted him to restart his computer once the virus definitions update completed. Once he restarted, a blank screen appeared and said, "Invalid Boot Disk, please insert in drive a:"Problem is, there is no disks in any drive.
View 8 Replies
View Related
Aug 19, 2007
My comp is acting weird so i decided to either repair windows or reinstall windows, but after it says press any key to boot from cd, and i press a key, i get a blank screen or it loads windows.
View 14 Replies
View Related
Feb 3, 2010
Just wanted to give a solution for an issue that I had on a Dell Optiplex GX270, where it was having problems hanging when a couple of peripheral USB items were plugged in. After I had installed an HP printer, I plugged in an 8Gb thumb drive. It would hang for a very long time until I finally had to reboot. When it went through the short Dell setup screen, it just went black with a flashing underline in the top left corner instead of going to the first Windows startup screen. The funny thing is that I would unplug the HP printer's USB cable while the computer was still powered, and it would immediately start Windows. Through several different test cycles I found that A) Leaving the printer USB cable plugged in during a restart brought up the blank screen w/flashing underscore. B) Not connecting the printer USB cable during a restart brought Windows up properly. That told me that there was a problem with BIOS. I went to the Dell website and flashed my BIOS with the latest update for my computer. That resolved the issue immediately.Hope this helps others resolve similar problems, because it seemed like there
View 1 Replies
View Related
Mar 22, 2010
This is my first post on this site, I know that there have been posts on this topic becfore, however mine is different than the rest of the posts. In the other posts,this has occured on a modified computer, but when it happened to me, it was my unmodded computer. So heres what happened. I boot up, and after the HP screen, instead of going to the windows loading screen, I get a message with alot of text, but the main point was that "a failure was imenent", F1 to continue, F2 to enter setup. So i hit F1 to continue, and after a minute of a blank screen and the blinking text dash, the DISK BOOT FAIlURE, INSERT SYSTEM DISK message. But I have never modified my coputer, and never used a setup disk before on this machine. BTW:I tried resetting BIOS, but to no avail.
View 6 Replies
View Related
Oct 20, 2009
Dell inspiron 510 laptop starts with dell logo XP logo and moving bar below then grey blank screen instead of users names only blank screen with moveable cursir used yesterday as normal except i did defrag
View 3 Replies
View Related
Jun 28, 2010
I have been trying to install Windows XP as a second OS as I already have Windows 7 Ultimate installed. Unfortunately, after I select a partition, format it, and reboot the system stalls on the screen after the BIOS that has something to do with a list of devices and such. After 10 or so seconds a few characters and letters go blank randomly on the page. I rebooted and selected my cd drive as the boot device and accidentally didn't press a button in time to boot and a bunch of highlighted numbers were thrown all over the screen and a random smiley face on one of the lines.
View 12 Replies
View Related
Feb 11, 2009
Was working fine this morning but this afternoon - Upon startup everything runs fine until after the windows splash screen everything goes black and the only thing visable is a cursor, but nothing to click, cannot ctrl=alt=del, cannot right click. Cannot enter safe mode at all, last good configuration doesn't work either. Computer is still running, fan whirring, lights flashing. Fan has been cleaned and power supply checked, no change. Cannot get into anything to run explorer or virus check. She is running Windows XP SP3. I'm unsure of when sp3 was installed. I understand this may be an issue, along with video and graphics drivers, display settings, corrupt registry, flat CMOS battery or loose internal connections.
View 3 Replies
View Related
Aug 8, 2007
I cloned the 40 GB original HDD, IDE, to an IDE 80 GB HDD using Acronis True Image 8.Cloning took 9 hours.Original HDD was in the Net Vista. Destination HDD attached via USB 2.I had tried using Norton Ghost 2003, but the cloning did not progress. Now, trying to boot to the cloned HDD, the system stalls, before Windows XP Splash screen, with a flashing cursor in the upper left corner.Jumper on original HDD is set to master. Jumper on Destination HDD is set to master. I booted using my Win XP Home CD, but the "R" option was not available. Windows XP Home Edition Setup "If one of the following Windows XP installations is damaged, setup can try to repair it". Now select the operating system you wish to repair, if as in most occasions there is only one, the just press "R" to continue.
View 14 Replies
View Related
May 4, 2010
DELL XPS 410 XPSP2 - system will not boot past the blinking cursor in the corner. I can't get to the BIOS and the PC will not boot from CD. I have tried to hit F1, F2, F8 andF12 at startup to no avail. I replaced the Video card with a known good card, still no luck.I tried the unplug/plug method for the I/O panel with no changes.The fans are working correctly, so I don't think it was an overheating issue and the power supply is up and running.
View 8 Replies
View Related
Jun 30, 2008
I'm hoping some can offer some advice on this rather troublesome problem.I have a Dell laptop that was recently formatted, XP Home was re-installed from the original Dell ReInstallation CDs.Everything has been working perfectly for the past month. However, this past weekend, we're now unable to boot into Windows.
When powering the machine on, the Dell logo appears as normal. When the Dell logo disappears,instead of the Windows splash screen appearing, a flashing cursor appears in the upper left hand corner. Nothing else. After letting the machine sit for approximately 30-minutes, an error message never appears.
I've already attempted a few things Removed the drive, attached it to a working computer via USB adapter. There, I performed a scan disk. No error messages appear. Placed the hard drive back into the Dell laptop. Inserted the Windows XP ReInstallation CD to access the recovery console. FIXMBR completed successfully, however the problem continues Verified that the system BIOS recognizes the drive and correct drive size/parameters.I really don't know what to do. Apparently the repair install function is not available with the Dell OS ReInstallation CD. Can someone throw a hint or two? I'm almost out of gas on this one and need to have it running again ASAP.
View 13 Replies
View Related
Jun 22, 2007
since Vista isn't working I'm trying to install XP pro on the system. I boot from CD, run the setup, when it restarts it goes to a black screen with a single flashing cursor in the top left instead of booting windows.
View 2 Replies
View Related
Jan 4, 2006
About four months ago, I received a computer as a gift. However, about two weeks ago, while booting, I got a screen asking to run (I believe) a scan on my drives. After the scan was done, The computer completely shut down. When I tried to turn it back on, where the log in screen should be with the accounts on it, I had only a black screen, but I could see and move my cursor.I have done everything I could think of, tried to start in Safe Mode (same thing happened), tried to boot in Last Best Configuration(same), put hard drive in another computer and defragged it(No Results), and tried putting my Windows XP CD in to do a System Restore(Same thing happens). I don't really have very much on the computer, so a restore would not be too painful. Is there anything that I NEED to do when booting up with my XP disk to perform a restore?
View 1 Replies
View Related
Jun 28, 2005
the cursor moves across the screen by itself and I notice if I pick the mouse up then lightly dump it onto the mouse pad the cursor will begin moving across the screen again.This may not have anything to do with the cursor but I can not sign out of this newsgroup.
View 7 Replies
View Related
Dec 2, 2009
For the first time, about an hour ago, while starting-up, the cursor and screen froze. Until just now, it never happened on my PC before but I've had it many times at the Internet Cafe. When it happened, I always pressed the 3 keys: Crl, Alt and Delete and the PC would turn-off and re-boot but with my PC, it refused to re-boot after pressing for a half-hour. It showed "Windows Task Manager" where the message kept appearing. "Application Error" which kept flashing endlessly. The cursor froze in the center of the screen intermittently an hourglass flashed-on. This continued for over 1 hour. What is a fast way to re-boot when the cursor freezes ? I've used iMacs for years at the Apple Store and I never had a "Frozen" screen. Is this just a Windows problem? Does the new Windows 7 also "crash"?
View 6 Replies
View Related
