when he turns it on, it shows the HP logo with the F1 for Setup and such, then it goes straight to a blank screen with a cursor flashing. it's a boot sector problem. I just need to get him booted up so I can do some scans.
View 2 RepliesMachines were running fine until someone took out a power pole down the road.When power resumed, powered my machines back up. 2 out of 3 did OK. The third goes immediately to a black screen with a flashing cursor in the upper corner.Have already:
1 removed and reseated the power and data cables from the hard drive
2 removed and reseated the RAM modules
3 tried pressing every F key on the keyboard
4 Cntl-Alt-Delete doesn't work either
5 tried on another monitor.
Don't even get to Windows splash screen or able to get to Safe Mode.
I have an Intel DG31PR with 1 GB memory and Windows XP Home. When I turn the computer on the Intel logo and BIOS 2 settings appear then the screen goes back with a flashing cursor at the top left of the screen . I have to reboot several times before I can login. How do I stop this from happening?
View 3 Replies View RelatedJust wanted to give a solution for an issue that I had on a Dell Optiplex GX270, where it was having problems hanging when a couple of peripheral USB items were plugged in. After I had installed an HP printer, I plugged in an 8Gb thumb drive. It would hang for a very long time until I finally had to reboot. When it went through the short Dell setup screen, it just went black with a flashing underline in the top left corner instead of going to the first Windows startup screen. The funny thing is that I would unplug the HP printer's USB cable while the computer was still powered, and it would immediately start Windows. Through several different test cycles I found that A) Leaving the printer USB cable plugged in during a restart brought up the blank screen w/flashing underscore. B) Not connecting the printer USB cable during a restart brought Windows up properly. That told me that there was a problem with BIOS. I went to the Dell website and flashed my BIOS with the latest update for my computer. That resolved the issue immediately.Hope this helps others resolve similar problems, because it seemed like there
View 1 Replies View RelatedI just came back from vacation and turned on my other computer only to find that right after it flashed the "Dell" screen, it showed a blank screen with random letters/numbers flashing in green. It just freezes there.
It's possible that someone else was on it and may have messed it up but I'm not sure. I'm hoping its still salvageable.
I recently tryed installing wubi linux hoping that this would be an optimum way to install ubuntu with out getting errors with my XP installation. But it seems ever since then I now can't access XP. As soon as I login I get my background and my cursor, there is no GUI. I can press Ctrl-Alt-Del to get to task manager, but I can't run anything from it. I can't safe boot, but i can safe boot with cmd. Last known config won't work, chkdsk doesn't make any difference, repair installs don't seem to make a difference and the only thing I can physically notice different is the absence of the Explorer.exe service. I checked my C drive and it's in the correct directory, it's just not starting. I booted into safe mode with cmd and ran msconfig, and explorer.exe isn't listed there either. So I am guessing there is an issue there, and I think that is the root problem; reinstalling XP is a total total last resort. I'd greatly appreciate it if anybody could help, or have any suggestions.
View 1 Replies View RelatedWhen I try to start up my machine, the Dell boot screen with the F2 and F12 options appear, but instead of moving on to the Windows XP loading screen, it simply shows a black screen with a blinking cursor in the top left. I cannot type anything with this cursor. There is clearly something wrong with the boot procedure or, I think, with my hard drive. The hard drive (160gb) is new and has been working well since February.I'm using a Dell Inspiron 9300 laptop. I've run Diagnostics with no errors, booted from XP CD to try bootcfg /rebuild, fixboot & fixmbr, and the lengthy chkdsk /r, all to no avail. I've even tried replacing two NTLDR files by copying them from the XP CD. Nothing has worked; I still have a black screen with a flashing cursor when my HDD should be loading. I've tried removing and reinserting the HDD itself, also to no avail. I haven't yet opened the case up to try to see if there's anything to clean or any botched connections, but I don't see how something like that would have happened on its own. All of my components (RAM, HDD, Video Card, Processor, etc.) seem to be recognized in the BIOS menu.
I should note that when I run chkdsk /r, the progress quickly gets to 25%, slows down and takes a while to get to 51%, and then slows down even more and takes maybe two or three hours to complete. I also notice that the progress advances to about 65% sometimes and then returns to 50% again. I've run chkdsk several times now and there's been no improvement in the startup.I realize I could simply reformat and reinstall Windows, but I have a lot of very important data and work stored on my drive that I hadn't had a chance to backup to my external drive. Please let me know if there's a way I can get the startup to work so that I can access my files again.
I am using a custom built PC with retail bought Win XP SP2 installed.The PC is about 3 months old now and has run perfectly so far with 2 hard drives and 1 install of XP on the master drive (S-ATA). I redecorated the house and this resulted in the PC being unplugged for about 2 weeks. Havin just plugged it back in and tried to start it, I am getting through the POST stage and then I just get a blank screen with a flashing line at the top left. This used to happen with boot up but disappeared after about five seconds. This one just stays flshing forever.I was wondering if anyone would have any advice for me. If I haven't given any required details please ask and I will post them ASAP.
View 7 Replies View RelatedWhen I turn my computer on it goes to the blue hp logo and then to a blank screen with a blinking cursor in the top left corner. If I hit f8 when booting it gives me 2 options...f1 to setup and f2 to resume. It won't let me go into safe mode or anything. I have tried booting from the xp cd, but nothing happens. I have tried replacing the battery and that hasn't done anything. It started when trying to open a program, the computer just went blank. When trying to reboot, this mess started.Also, I just got this error message, which is new.i got it after I unplugged the computer for awhile.. warning 251: system cmos checksum bad dafalut config used
View 11 Replies View RelatedI have two HDD. In the 1st one XP and Ubuntu and in the 2nd one FC5. Suddenly the XP is not booting. As I choose XP from boot loader [I use Acronis Boot Manager] it is giving me a blank screen with the cursor blinking at the top left corner. Just that no movement, no XP logo nothing.
I tried fixmbr, fixboot and chkdsk; but in vein. sfc scannow is not supported. Fixmbr and fixboot succeeded but it is giving me the same result. I reinstalled FC5's Grub in the hdb5 [location of FC5's installation] but it does not give me boot option. I then reinstalled FC5's grub in hda1 and atleast now I can access net and look for immediate help from you. I know reinstalation is the last option but I just don't want to do that unless I do not have any more avenues left.
I cloned the 40 GB original HDD, IDE, to an IDE 80 GB HDD using Acronis True Image 8.Cloning took 9 hours.Original HDD was in the Net Vista. Destination HDD attached via USB 2.I had tried using Norton Ghost 2003, but the cloning did not progress. Now, trying to boot to the cloned HDD, the system stalls, before Windows XP Splash screen, with a flashing cursor in the upper left corner.Jumper on original HDD is set to master. Jumper on Destination HDD is set to master. I booted using my Win XP Home CD, but the "R" option was not available. Windows XP Home Edition Setup "If one of the following Windows XP installations is damaged, setup can try to repair it". Now select the operating system you wish to repair, if as in most occasions there is only one, the just press "R" to continue.
View 14 Replies View RelatedI'm hoping some can offer some advice on this rather troublesome problem.I have a Dell laptop that was recently formatted, XP Home was re-installed from the original Dell ReInstallation CDs.Everything has been working perfectly for the past month. However, this past weekend, we're now unable to boot into Windows.
When powering the machine on, the Dell logo appears as normal. When the Dell logo disappears,instead of the Windows splash screen appearing, a flashing cursor appears in the upper left hand corner. Nothing else. After letting the machine sit for approximately 30-minutes, an error message never appears.
I've already attempted a few things Removed the drive, attached it to a working computer via USB adapter. There, I performed a scan disk. No error messages appear. Placed the hard drive back into the Dell laptop. Inserted the Windows XP ReInstallation CD to access the recovery console. FIXMBR completed successfully, however the problem continues Verified that the system BIOS recognizes the drive and correct drive size/parameters.I really don't know what to do. Apparently the repair install function is not available with the Dell OS ReInstallation CD. Can someone throw a hint or two? I'm almost out of gas on this one and need to have it running again ASAP.
I was on my dad's laptop earlier on which is a Dell Inspiron | 5150, which crashed on me and wasnt responding... so i pressed the power button to turn it off as i tried Ctrl, Alt & Del to bring up the task manager but was taking far too long.Since i done that i waited a couple of minutes and tried to turn it back on, but now when i turn it on im only getting a black screen with a white cursor flashing. No windows or anything is loading up, I've even tried leaving it for say 10 mins or so and still no sign of it bringing the windows logo up.
View 3 Replies View Relatedit happened was my "mcafee security center" ( anti virus software ran out ) so I un-installed it then re-installed it hoping it would work again however it never as the yearly expire date was up had to renew it but i choose not to and downloaded "avg anti virus ,avg anti spyware , spybot s&d , ad-aware "(Free software) instead i ran all scans from them scans show nothing found but i noticed looking at "cursor" the hourglass/egg-timer was flashing/blinking on and off all the time and still does to this day flash's/blinks 2-3 times every second never stops i also noticed sometimes i can not access stuff from PC say i click on a icon on desktop nothing happens doesn't open it right click on it gives options to open ectHowever they wont work , even going to start menu click something nothing will open like any program or anything u want to run however this has only happened a few times most of the time things seem to be working normal apart from the flashing hourglass next to cursor it wont stop flashing from the moment you start using PC
Yesterday I was on my computer,I downloaded a codec,and afterwards I got a flashing yellow triangle and blue/red flashing circle on my bottom taskbar.I have ad subtract which is suppose to stop popups.Now I keep getting a popup from the triangle that says(System Alert:Trojan-Spy.Win32@mx and by the circle I get(System Alert popup)And Ads-Virusburst.com,The Spyguard.com,Malware Wipe.com and a ISA Monitor.exe,What the heck is going on?I went to my control panel and uninstalled everything that was downloaded in the last couple of days.I click the x on popups to close,and 30 seconds they come right back.Tried a system restore,and will not work.Any suggestions?Never had any problems in the past.
View 7 Replies View RelatedMy screen keeps flashing and changing colour to a dark horrible colour, It's been doing this for a while but lately seems to be doing it more often and wont change back to what it should be like. Any idea's what the problem could be?
View 11 Replies View RelatedAnytime i go to watch a movie, it flashes black real quick before it starts and then again after i close it.Any idea why? (ATI Mobility x1300 video card, and latest catalyst drivers).
View 7 Replies View RelatedMy computer will not boot up. It gets to a certian point and sits there flashing an underscore in the top, left hand corner of the screen. It has done this before, like it stalled on start up and I would just restart it and it would finish booting but that isn't working. I'm using XP Professional...
I installed a software last night on my computer to allow me to transfer images and stuff to my cell phone (motorolla product). When I was installing it a box or something appeared saying it was suddenly missing files and it wanted me to put in the Service pack 2 disk - which I didn't have. My only guess is that is what caused this problem. I have not saved anything yet (was going to do that tomarrow on my only day off)
it all started when I ran Nod32 antivirus. I ran it because I had some viruses on my computer that I wanted to get rid of. After the scan there were 180 some detected objects that were quarantined or deleted. So then I restart my computer and after the windows xp logo there is just a black screen with no cursor. And after awhile the computer will just restart and try booting up again. I tried going into safe mode and safe mode with command prompt but I still get a black screen with no cursor. The last known good configuration doesn't work either. I'm pretty frustrated because I did nothing wrong. I am also having a feeling that nod32 might have quarantined some infected files that are essential for Windows Xp to boot. I also do not have any windows xp disks with me how to fix this?
View 11 Replies View RelatedWas working fine this morning but this afternoon - Upon startup everything runs fine until after the windows splash screen everything goes black and the only thing visable is a cursor, but nothing to click, cannot ctrl=alt=del, cannot right click. Cannot enter safe mode at all, last good configuration doesn't work either. Computer is still running, fan whirring, lights flashing. Fan has been cleaned and power supply checked, no change. Cannot get into anything to run explorer or virus check. She is running Windows XP SP3. I'm unsure of when sp3 was installed. I understand this may be an issue, along with video and graphics drivers, display settings, corrupt registry, flat CMOS battery or loose internal connections.
View 3 Replies View Relatedsince Vista isn't working I'm trying to install XP pro on the system. I boot from CD, run the setup, when it restarts it goes to a black screen with a single flashing cursor in the top left instead of booting windows.
View 2 Replies View RelatedAbout four months ago, I received a computer as a gift. However, about two weeks ago, while booting, I got a screen asking to run (I believe) a scan on my drives. After the scan was done, The computer completely shut down. When I tried to turn it back on, where the log in screen should be with the accounts on it, I had only a black screen, but I could see and move my cursor.I have done everything I could think of, tried to start in Safe Mode (same thing happened), tried to boot in Last Best Configuration(same), put hard drive in another computer and defragged it(No Results), and tried putting my Windows XP CD in to do a System Restore(Same thing happens). I don't really have very much on the computer, so a restore would not be too painful. Is there anything that I NEED to do when booting up with my XP disk to perform a restore?
View 1 Replies View Relatedthe cursor moves across the screen by itself and I notice if I pick the mouse up then lightly dump it onto the mouse pad the cursor will begin moving across the screen again.This may not have anything to do with the cursor but I can not sign out of this newsgroup.
View 7 Replies View RelatedFor the first time, about an hour ago, while starting-up, the cursor and screen froze. Until just now, it never happened on my PC before but I've had it many times at the Internet Cafe. When it happened, I always pressed the 3 keys: Crl, Alt and Delete and the PC would turn-off and re-boot but with my PC, it refused to re-boot after pressing for a half-hour. It showed "Windows Task Manager" where the message kept appearing. "Application Error" which kept flashing endlessly. The cursor froze in the center of the screen intermittently an hourglass flashed-on. This continued for over 1 hour. What is a fast way to re-boot when the cursor freezes ? I've used iMacs for years at the Apple Store and I never had a "Frozen" screen. Is this just a Windows problem? Does the new Windows 7 also "crash"?
View 6 Replies View RelatedI have just fired a new hard drive, but i am having a problem installing xp. When i first switch on. i get a press any key to boot from cd message. But then nothing happens, just a black screen, with a cursor on the corner.
View 7 Replies View RelatedFrozen cursor Slow startup
The first issue is that my cursor is stuck in the middle of the screen upon startup. It will not move and I have to shut down, check connections, (keyboard and mouse are wireless, batteries are new) and as it restarts I click the mouse and it moves after I do this several times. I have to put the computer on standby every night or I have to go through the whole thing again. Moreover, windows startup has become horribly slow�and I have �hi-speed� roadrunner I use firefox for my internet connection. I have run defraq, disk cleanup, AVG, maleware, spybot, hijackthis,and Ad-aware. No change....
Thank you for any help. The following is my system info�let me now what other info you may need. BTW V2Premier batch loaded XP on the cpu so I do not have a disk. They are out of business and have sent me in circles trying to get one.
I have a ibm think pad with windows xp on. It will boot upto the windows xp loading screen with the loading bar and then when it should move onto the log on screen it brings up a blank page with a small mouse cursor. When i boot it up in safe mode it comes up with a bigger mouse cursor. I have tried pressing control alt delete and buttons like space bar to see if they work but still nothing.
View 9 Replies View RelatedWhen I try and boot up my computer it gets through the dell boot screen. But when it starts trys to boot up windows I just get a black screen with a blinking cursor in the top rigth hand corner. I didn't do anything out of the ordinary? I updated my internet explorer to IE7, and I updated my I-Tunes. I don't know what could have done it or what I have done. I don't get any error message or anything.
View 2 Replies View RelatedFriends laptop boots up to a blank/black screen with a movable mouse cursor and hangs right there. No keyboard commands work. System can only be shut down by holding power for 5 sec.I backed up her data, and did a windows repair via the installation disc.I was sure that was gonna fix it now i could use some suggestions. Any Ideas what to troubleshoot next? *Note* before doing the above i tried the typical things like, Last known good configuration, halt on error, safe mode, vga mode. all of those yeild the same results Blank screen with a movable cursor.
View 6 Replies View RelatedAfter ran system restore, the sys cant finish this process, we try in ran system restore in safe mode, but after that, we cant see the windows logo, just appear the mouse's cursor, we can use it, but no icons appear in system, this occur also in safe mode and when try with last know good config.
View 1 Replies View RelatedI turned on my laptop and received a blue screen that said "unmountable_boot_volume" and a some other info.I tried running the recovery off the XP cd and still yield the same blue screen.Then I repaired Windows XP Home Edition using a different part of the same cd.But now when I boot up I make it past the start up stuff and end up at what should be the login but instead is just a black screen w/ my cursor which I can move.I've tried ctrl alt deleting but nothing comes up.I've tried last good config but that does not help.Safe mode takes me to the black screen but now displays the Safe Mode crap in all 4 corners.
View 6 Replies View Related