I cloned the 40 GB original HDD, IDE, to an IDE 80 GB HDD using Acronis True Image 8.Cloning took 9 hours.Original HDD was in the Net Vista. Destination HDD attached via USB 2.I had tried using Norton Ghost 2003, but the cloning did not progress. Now, trying to boot to the cloned HDD, the system stalls, before Windows XP Splash screen, with a flashing cursor in the upper left corner.Jumper on original HDD is set to master. Jumper on Destination HDD is set to master. I booted using my Win XP Home CD, but the "R" option was not available. Windows XP Home Edition Setup "If one of the following Windows XP installations is damaged, setup can try to repair it". Now select the operating system you wish to repair, if as in most occasions there is only one, the just press "R" to continue.
I have an Intel DG31PR with 1 GB memory and Windows XP Home. When I turn the computer on the Intel logo and BIOS 2 settings appear then the screen goes back with a flashing cursor at the top left of the screen . I have to reboot several times before I can login. How do I stop this from happening?
I'm hoping some can offer some advice on this rather troublesome problem.I have a Dell laptop that was recently formatted, XP Home was re-installed from the original Dell ReInstallation CDs.Everything has been working perfectly for the past month. However, this past weekend, we're now unable to boot into Windows. When powering the machine on, the Dell logo appears as normal. When the Dell logo disappears,instead of the Windows splash screen appearing, a flashing cursor appears in the upper left hand corner. Nothing else. After letting the machine sit for approximately 30-minutes, an error message never appears.
I've already attempted a few things Removed the drive, attached it to a working computer via USB adapter. There, I performed a scan disk. No error messages appear. Placed the hard drive back into the Dell laptop. Inserted the Windows XP ReInstallation CD to access the recovery console. FIXMBR completed successfully, however the problem continues Verified that the system BIOS recognizes the drive and correct drive size/parameters.I really don't know what to do. Apparently the repair install function is not available with the Dell OS ReInstallation CD. Can someone throw a hint or two? I'm almost out of gas on this one and need to have it running again ASAP.
when he turns it on, it shows the HP logo with the F1 for Setup and such, then it goes straight to a blank screen with a cursor flashing. it's a boot sector problem. I just need to get him booted up so I can do some scans.
Machines were running fine until someone took out a power pole down the road.When power resumed, powered my machines back up. 2 out of 3 did OK. The third goes immediately to a black screen with a flashing cursor in the upper corner.Have already:
1 removed and reseated the power and data cables from the hard drive
2 removed and reseated the RAM modules
3 tried pressing every F key on the keyboard
4 Cntl-Alt-Delete doesn't work either
5 tried on another monitor.
Don't even get to Windows splash screen or able to get to Safe Mode.
I was on my dad's laptop earlier on which is a Dell Inspiron | 5150, which crashed on me and wasnt responding... so i pressed the power button to turn it off as i tried Ctrl, Alt & Del to bring up the task manager but was taking far too long.Since i done that i waited a couple of minutes and tried to turn it back on, but now when i turn it on im only getting a black screen with a white cursor flashing. No windows or anything is loading up, I've even tried leaving it for say 10 mins or so and still no sign of it bringing the windows logo up.
it happened was my "mcafee security center" ( anti virus software ran out ) so I un-installed it then re-installed it hoping it would work again however it never as the yearly expire date was up had to renew it but i choose not to and downloaded "avg anti virus ,avg anti spyware , spybot s&d , ad-aware "(Free software) instead i ran all scans from them scans show nothing found but i noticed looking at "cursor" the hourglass/egg-timer was flashing/blinking on and off all the time and still does to this day flash's/blinks 2-3 times every second never stops i also noticed sometimes i can not access stuff from PC say i click on a icon on desktop nothing happens doesn't open it right click on it gives options to open ectHowever they wont work , even going to start menu click something nothing will open like any program or anything u want to run however this has only happened a few times most of the time things seem to be working normal apart from the flashing hourglass next to cursor it wont stop flashing from the moment you start using PC
Yesterday I was on my computer,I downloaded a codec,and afterwards I got a flashing yellow triangle and blue/red flashing circle on my bottom taskbar.I have ad subtract which is suppose to stop popups.Now I keep getting a popup from the triangle that says(System Alert:Trojan-Spy.Win32@mx and by the circle I get(System Alert popup)And Ads-Virusburst.com,The Spyguard.com,Malware Wipe.com and a ISA Monitor.exe,What the heck is going on?I went to my control panel and uninstalled everything that was downloaded in the last couple of days.I click the x on popups to close,and 30 seconds they come right back.Tried a system restore,and will not work.Any suggestions?Never had any problems in the past.
The unit has an HP mainboard 800mhz, a P4 2.6Ghz processor, 300Watt PSU, and all was well until until I actually attached a known good XP HDD to the otherwise completed system. It failed to boot, resulting in only a flashing underscore after the HP/P4 boot screen, no beeps. Same thing happens if I try to boot from an XP CD
Just wanted to give a solution for an issue that I had on a Dell Optiplex GX270, where it was having problems hanging when a couple of peripheral USB items were plugged in. After I had installed an HP printer, I plugged in an 8Gb thumb drive. It would hang for a very long time until I finally had to reboot. When it went through the short Dell setup screen, it just went black with a flashing underline in the top left corner instead of going to the first Windows startup screen. The funny thing is that I would unplug the HP printer's USB cable while the computer was still powered, and it would immediately start Windows. Through several different test cycles I found that A) Leaving the printer USB cable plugged in during a restart brought up the blank screen w/flashing underscore. B) Not connecting the printer USB cable during a restart brought Windows up properly. That told me that there was a problem with BIOS. I went to the Dell website and flashed my BIOS with the latest update for my computer. That resolved the issue immediately.Hope this helps others resolve similar problems, because it seemed like there
I am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
first i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
a while ago my computer failed to boot repeatedly and I took it to the repair man who got it going but when I first switch it on I get the message invalide boot.ini file - booting from c and what has happened to create this problem and can I restore my PC to boot from the original file
my computer just started having boot problems. I had not used it in a while because it was a backup. My primary has been totally taken over by a spyware program so I need to use the backup and now it won't boot up. All I get is the PXE_E53 no filename received message.
i am getting a Boot Failure message on my computer when I start it up. It seems like it is trying to boot from the various devices, Then I receive the Boot Failure message.
When booting up to Windows XP disc, i get an error screen that reads: Unmountable_Boot_Volume The problem is that the error screen appears before I can even get to the Windows Setup Welcome screen. So I can't even perform a recovery console procedure. I don't need the files on my hard drive anymore, I just need the computer working.
DELL XPS 410 XPSP2 - system will not boot past the blinking cursor in the corner. I can't get to the BIOS and the PC will not boot from CD. I have tried to hit F1, F2, F8 andF12 at startup to no avail. I replaced the Video card with a known good card, still no luck.I tried the unplug/plug method for the I/O panel with no changes.The fans are working correctly, so I don't think it was an overheating issue and the power supply is up and running.
I am using a custom built PC with retail bought Win XP SP2 installed.The PC is about 3 months old now and has run perfectly so far with 2 hard drives and 1 install of XP on the master drive (S-ATA). I redecorated the house and this resulted in the PC being unplugged for about 2 weeks. Havin just plugged it back in and tried to start it, I am getting through the POST stage and then I just get a blank screen with a flashing line at the top left. This used to happen with boot up but disappeared after about five seconds. This one just stays flshing forever.I was wondering if anyone would have any advice for me. If I haven't given any required details please ask and I will post them ASAP.
When I turn my computer on it goes to the blue hp logo and then to a blank screen with a blinking cursor in the top left corner. If I hit f8 when booting it gives me 2 options...f1 to setup and f2 to resume. It won't let me go into safe mode or anything. I have tried booting from the xp cd, but nothing happens. I have tried replacing the battery and that hasn't done anything. It started when trying to open a program, the computer just went blank. When trying to reboot, this mess started.Also, I just got this error message, which is new.i got it after I unplugged the computer for awhile.. warning 251: system cmos checksum bad dafalut config used
I cannot boot my XP machine. In safe mode it also says safe mode in white text in each corner and shows windows build details at the top. I have trying going back to previous good config - same problem. A normal boot just leads to a black screen with a movable mouse arrow - no sign of a login screen. I have tried a recovery reinstall from a an XP pro CD from another computer - this took about 40 minutes and went through all the steps normally (with normal graphics displayed duting the reinstall) but after finishing the same problem is still there.
Only now the windows build info in sfae mode reports SP1 (originally didi not as the computer was supplied with XP before SP1) I am at a loss to know what to do to get the machine wordking without a refomat of the hard disk, whcih will destroy all my data, and my partners stuff too - mostly not backed up, as usual.
I left a MICROSOFT WORD CD in the player and shutdown, the next day I turn on the computer and the CD started up, and it has gone to black screen with cursor each time I start it now. I get 2 choices, F2 or F12. The 4 code lights on the back panel are all green indicating no problems, what can I try?
Ever since a power failure yesterday, my computer is not booting 100% of the way - it seems to stall at the end after loading desktop etc, can't see anything missing but I am unable to do anything. Nothing opens when clicked on. It works perfectly in Safe Mode with Networking.
I checked Device Manager and found 3 things highlighted:
HID Non-user input Data Filter
HID Non-user input Data Filter in HID section, and
WAN Miniport (IP) in Network Adaptors.
I do not have a wireless network, only a hard-wired one, so not sure what that is about.
Today, when the XP boot screen appeared after post, my machine rebooted. Went to MSKB and followed instructions for Recovery Console, but when I got to the money shot, I was denied access - tried this 4 times, same response. Tried repair install, but after drivers loaded and auto re-boot, XP boot screen appeared and machine rebooted...vicious cycle.
so my computer is coming up with this message on a black screen. "Disk boot Failure, Insert boot disk and press enter." What is this? What does this mean? I just downloaded a "Regicure" to clean up my PC because it was running very slow and wouldnt open some of my files. Everything seem to be ok, untill this morning. Now i dont know what to do. It wont even boot. That black screen is all i get. Please help me! I purchased this computer in Feb."07. Its not even a year old.
every time I load up my PC (Win XP Pro, Mozilla Firefox) I get the following error box: Microsoft Visual C++ Runtime Library Program: c:progra~1intern~1iexplore.exe File: .lists.cpp Line: 480 Expression:!(p==bodykwref.end()) For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts [note--I've tried this--it's all programmer speak and I'm just a novice trying to get rid of the error!] (Press retry to debug the application-JIT must be enabled) [This works--for 10 minutes or so] Abort Button Retry Button Ignore Button. I assume it's got something to do with iexplore, so I've reinstalled a couple times--no joy.
Trying to hook up computer to wireless.Computer has been sitting in closet for 6 months. Worked great when taken down. Now when I hook up I get "Disk boot Failure".Any help will be greatly appreciated. Telling me that IDE Master none if that means anything.
Hey guys, as u gather my nakme is stresseoutsandy for a reason, i recently bought a diy kit ocmputer and builllt it up then when i turn it on it says boot disk failure: mplease insert system disk and press enter,when in do so it loads then goes back to the same screen.could this be because the xp disc is a copy ? or is my computer broken?
Installed XP on a Maxtor Diamondmax 10 200GB SATA 150 (F6 and drivers from floppy) ive it as 1st boot device, but it gives me a boot failure error after POST my drive's are as follows Primary IDE Master - Maxtor 40GB Primary IDE Slave - Maxtor 120GB Secondary IDE Master - NEC DVD Writer Secondary IDE Slave - Sony CD ROM Third IDE Master - Maxtor 200GB
When I tried to boot it up it stalls just before loading up Windows XP Media Center. I have tried to boot from an external back-up drive, a memory stick with a bootable DOS program called "Spinrite" as well as from the system recovery DVD but it stalls at the same point. I made the appropriate changes to the boot order in the BIOS but that does not seem to results
