Pro SP2 Boot Failure
Dec 26, 2007After POST, when does Windows begin to load? After a re-start, PC had been on for 1 hour; off 5 min; boot hung at flashing cursor in upper left.
View 7 Replies
ADVERTISEMENT
Boot Failure: Select Proper Boot Device Or Insert Boot Media?
Nov 11, 2006I am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
Boot Failure:No HDD In Boot Menu/insert System Disk And Press Enter?
Jun 10, 2007first i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
View 3 Replies View RelatedXp Boot Failure: Invalide Boot.ini File - Booting From C?
Jan 31, 2008a while ago my computer failed to boot repeatedly and I took it to the repair man who got it going but when I first switch it on I get the message invalide boot.ini file - booting from c and what has happened to create this problem and can I restore my PC to boot from the original file
View 1 Replies View RelatedBoot Failure PXE-E53 No Boot Filename Received?
Jul 28, 2007my computer just started having boot problems. I had not used it in a while because it was a backup. My primary has been totally taken over by a spyware program so I need to use the backup and now it won't boot up. All I get is the PXE_E53 no filename received message.
View 1 Replies View RelatedBoot Failure: System Trying To Boot From Various Devices?
Aug 9, 2005i am getting a Boot Failure message on my computer when I start it up. It seems like it is trying to boot from the various devices, Then I receive the Boot Failure message.
View 4 Replies View RelatedBoot Failure: Unmountable Boot Volume?
Apr 21, 2008When booting up to Windows XP disc, i get an error screen that reads: Unmountable_Boot_Volume The problem is that the error screen appears before I can even get to the Windows Setup Welcome screen. So I can't even perform a recovery console procedure. I don't need the files on my hard drive anymore, I just need the computer working.
View 2 Replies View RelatedCant Boot Since Power Failure
Mar 22, 2010Ever since a power failure yesterday, my computer is not booting 100% of the way - it seems to stall at the end after loading desktop etc, can't see anything missing but I am unable to do anything. Nothing opens when clicked on. It works perfectly in Safe Mode with Networking.
I checked Device Manager and found 3 things highlighted:
HID Non-user input Data Filter
HID Non-user input Data Filter in HID section, and
WAN Miniport (IP) in Network Adaptors.
I do not have a wireless network, only a hard-wired one, so not sure what that is about.
Boot Failure Home
Jul 7, 2007Today, when the XP boot screen appeared after post, my machine rebooted. Went to MSKB and followed instructions for Recovery Console, but when I got to the money shot, I was denied access - tried this 4 times, same response. Tried repair install, but after drivers loaded and auto re-boot, XP boot screen appeared and machine rebooted...vicious cycle.
View 11 Replies View RelatedDisk Boot Failure
Nov 6, 2007so my computer is coming up with this message on a black screen. "Disk boot Failure, Insert boot disk and press enter." What is this? What does this mean? I just downloaded a "Regicure" to clean up my PC because it was running very slow and wouldnt open some of my files. Everything seem to be ok, untill this morning. Now i dont know what to do. It wont even boot. That black screen is all i get. Please help me! I purchased this computer in Feb."07. Its not even a year old.
View 14 Replies View RelatedAssertion Failure On Boot Up
May 26, 2006every time I load up my PC (Win XP Pro, Mozilla Firefox) I get the following error box:
Microsoft Visual C++ Runtime Library
Program: c:progra~1intern~1iexplore.exe
File: .lists.cpp
Line: 480
Expression:!(p==bodykwref.end())
For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts [note--I've tried this--it's all programmer speak and I'm just a novice trying to get rid of the error!]
(Press retry to debug the application-JIT must be enabled) [This works--for 10 minutes or so]
Abort Button Retry Button Ignore Button. I assume it's got something to do with iexplore, so I've reinstalled a couple times--no joy.
Disk Boot Failure
Aug 6, 2005Trying to hook up computer to wireless.Computer has been sitting in closet for 6 months. Worked great when taken down. Now when I hook up I get "Disk boot Failure".Any help will be greatly appreciated. Telling me that IDE Master none if that means anything.
View 8 Replies View RelatedBoot Disk Failure
Jul 6, 2006Hey guys, as u gather my nakme is stresseoutsandy for a reason, i recently bought a diy kit ocmputer and builllt it up then when i turn it on it says boot disk failure: mplease insert system disk and press enter,when in do so it loads then goes back to the same screen.could this be because the xp disc is a copy ? or is my computer broken?
View 6 Replies View RelatedBoot Failure - SATA I?
Dec 27, 2005Installed XP on a Maxtor Diamondmax 10 200GB SATA 150 (F6 and drivers from floppy) ive it as 1st boot device, but it gives me a boot failure error after POST my drive's are as follows
Primary IDE Master - Maxtor 40GB
Primary IDE Slave - Maxtor 120GB
Secondary IDE Master - NEC DVD Writer
Secondary IDE Slave - Sony CD ROM
Third IDE Master - Maxtor 200GB
Boot Failure: Pxe- Mdf/ System Halted?
Oct 8, 2005The system will not boot up. Is there a boot disk I can download? System message: PXE-MDF: Boot Failure: System Halted.
View 4 Replies View RelatedBoot Failure: Used Various Devices/ Recovery Dvd ?
Sep 9, 2006When I tried to boot it up it stalls just before loading up Windows XP Media Center. I have tried to boot from an external back-up drive, a memory stick with a bootable DOS program called "Spinrite" as well as from the system recovery DVD but it stalls at the same point. I made the appropriate changes to the boot order in the BIOS but that does not seem to results
View 6 Replies View RelatedBoot Failure: HD Failed Put Other For Reinstall Xp ?
Oct 2, 2010The problem is the HD failed. So I put in another HD and reinstalled win XP pro. Everything was fine until this morning. I got up to find it had rebooted in the night and failed to boot up again. I get an error message that says boot failure system security something has failed to initialize due to hardware attatched to your computer is no longer functioning. I've loaded fail safe settings in bios nothing. I thought I'd reinstall windows but once windows starts to boot the keyboard and mouse are no longer recognized. I can't tell it to boot from CD.
View 6 Replies View RelatedDisk Boot Failure: Inserted The Win Xp Cd But Got The Same?
Dec 5, 2004I am trying to help my son with his computer. I hooked it up and got the following message:Disk Boot Failure Insert System Disk and Press Enter I inserted his Windows XP Pro (SP1) disk and it started doing it's thing. When it finished, it asked if I wanted to install or repair. I tried both and got the same message - that Win. XP Pro couldn't find the hard disk drive.
View 13 Replies View RelatedDisk Boot Failure On HP Computer
Feb 27, 2008I've had this computer for a year and a half, and this is the third time it's done this. I want to know if it's something I can fix on my own - I dont' know much about computers at all. To get into setup, I have to press F1 from the start up menu. If I don't do that, it takes me to a black screen where it says, Disk Boot Failure, please insert system disk and press enter. I have taken this computer to a repair shop, where I have been charged 200 dollars each time I get this message. Please advise me on what I should do, or if I'm doing something wrong? I have windows XP and it has only one DVD/CD drive, no floppy or anything like that. It started doing it this time when it froze and then I pressed cntrl-alt-delete and got the above error message.
View 5 Replies View RelatedComputer Won't Boot Up After Power Failure
Apr 28, 2010I was on the computer this morning (plugged into a power bar) when all of a sudden the power went out in my neighbourhood. I was just on the desktop at the time I believe. I unplugged everything to prevent anything from surging to be safe, and I went out for the day.When I got home, the power was back on, and so I plugged the computer back in. However, as I plugged in the computer, it turned on by itself. Normally it does not do this when I plug it in after it was forced to shut down for a blackout. I immediately knew something was up.When it started to turn on, it immediately went to a blue screen of death.
It won't get past this screen. I've tried Safe Mode, Last Known Good Configuration, Normal Mode and it just keeps going back to this screen. I also noticed it doesn't make the normal noises when it's booting up. It doesn't make that 'click click' sound when I'm booting up (I believe that's a hard drive sound?). I do have access to the Windows Recovery Console (I think - it appears as an option - I don't know if it will work) but I don't know what to do. It sounds like it did something to the hard drive... when I boot up the computer normally it asks me to press F1 (because my CMOS battery is low)... now on that screen it says Serial ATA at the top. I don't know why that is, or if this has anything to do with the low CMOS battery before, but I can't get it to turn on at all at the moment. I don't understand why the power failure would do this (or what it did)... I've never not been able to boot up after a power failure. And surely there wasn't a surge since it wasn't plugged in when the power came back on.Did it kill the HD? Anything I can do to at least recover some files?
Hdd Failure - Desktop Wont Boot
Apr 12, 2010My nephew who is 4 came to stay for the weekend whilst his dad and I went fishing.Yesterday I discovered that my desktop wont boot up...at all.I took out the hDD and put it in another pc as slave and disovered the files were corrupted.Seems the little tyke kept switching on on/off my pc.I used powermax to check the drive which it says is ok, reformatted but it will not let me reload XP.Keeps meeting files it cannot load and asks
that I check the disk(original).
Boot Failure Flashing Cursor
Aug 8, 2007I cloned the 40 GB original HDD, IDE, to an IDE 80 GB HDD using Acronis True Image 8.Cloning took 9 hours.Original HDD was in the Net Vista. Destination HDD attached via USB 2.I had tried using Norton Ghost 2003, but the cloning did not progress. Now, trying to boot to the cloned HDD, the system stalls, before Windows XP Splash screen, with a flashing cursor in the upper left corner.Jumper on original HDD is set to master. Jumper on Destination HDD is set to master. I booted using my Win XP Home CD, but the "R" option was not available. Windows XP Home Edition Setup "If one of the following Windows XP installations is damaged, setup can try to repair it". Now select the operating system you wish to repair, if as in most occasions there is only one, the just press "R" to continue.
View 14 Replies View RelatedDisk Boot Failure New Install
Jun 6, 2005I just built a computer today, and I'm trying to install Windows XP Pro with SP2. The CD boots fine, but once I have done the initial setup I get a Disk Boot Error every time I restart, unless I manually intervene and again boot from the CD (in which case I can finish the installation and everything works fine, except that I can only boot from the CD).I have done some searching, but although lots of people have had similar problems, I'm not finding a solution that works for me.
View 1 Replies View RelatedDelete Partition Failure To Boot
Feb 3, 2007I had 2 partitions on the laptop C and E, last night while fidling about I deleted E and since then laptop does not boot up. Comes up, windows hardware configuration not recoqnized. Tried to recover it but seems recovery bit was also deleted. I have to recover important office work else my life is over!!!
View 7 Replies View RelatedDisk Boot Failure / To Be Concerned Or Not
Jun 22, 2006Well everytime I SHUTDOWN my PC after a while, Lets say 2hours+ I get a "Disk Boot failure - Please insert system disk to continue" message, BEFORE windows loads, Before I started to panic I just restarted my PC and then it seems to boot normaly and quickly, If I leave my PC on Standby for a while, It comes back fine and ready, I play lots of games from my harddrive so I doubt its hardware failure. I have ran virus scans and spyware scans, Im clean. My boot sequence is, Floppy : CD drive : Harddrive : N/A. I dont have a CD in my drive at the time I boot.What is wrong? Why does a simple restart make it function correctly? Is it my boot sequence?
View 14 Replies View RelatedWon't Boot / Hard Drive Failure?
Aug 16, 2008My laptop, which was my dad's old office laptop, recently crashed. One day when I turned it on, a blue screen popped up and said there were a corrupt file or something. So I decided to reformat using a Windows XP cd, and for some reason it kept getting stuck on 91%, so I just left it on and it eventually hit 100% and completed.After everything was done, I turned it back and after the first Dell Screen bootup, the screen goes blank for 30 seconds, then a a line of white vertical lines show up at the bottom, looking at though something is loading, and it eventually finishes after a minute or two.Next the XP Bootup Screen comes up, and begins to load, but then the screen goes blank again.
View 14 Replies View RelatedBoot Failure: Computer Cycles Through Startup?
Apr 29, 2010I have recently had a major system failure, specifically my Windows XP will no longer fully boot. When I power on my computer, it gets to the "windows had
a problem starting up" page, where it gives options for starting in safe mode, normal mode, etc. However, no matter which option I choose, the computer cycles through startup and comes back to this same page. I have tried hitting F8 and getting to the advanced options, but I get the same result. Nothing I try works. I suspect there are corrupted sectors in the core system somewhere.
Boot Failure: System Does Not Recognize The Drives C?
Jul 7, 2005computer failed to reboot. I used a boot disk to get started. I then noticed that the system does not recognize the drives C (where my Windows XP OS is installed) or D drive which is a seperate physical drive for my data.
Disk Boot Failure While Starting The Computer?
Jun 17, 2010When I start my non-brand PC with an MSI mobo I receive the following message:disk boot failure insert system disk and press enterAt first I thought it was the SATA hard drive but when hooked up to another machine I can see all the files. When I went into the Phoenix/Award Bios all the drives are IDE drives. Not an SATA drive option anywhere. The computer was working great for a number of years. I hooked a brand new SATA drive and the BIOS does not recognize the drive.
Disk Boot Failure: Every Startup Comes Up Same Error?
Jul 12, 2009I keep getting this message everytime I try to turn the computer on. It will occasionally begin to start up but then will automatically reboot and I will get the Disk boot failure - Insert system disk and press Enter message again. I read the old posts on this but I have not been installing anything new.
View 8 Replies View RelatedBoot Disk Failure: Two Files Are Missing?
Sep 6, 2010i see this message comes on my screen that there is a boot failure and that two files are missing.i must then insert system disk and press enter,then the system goes through setup,after finishing this process it takes a good time for windows to get going.but my problem is when i closed windows and restart my computer iam getting the same message that i must insert system disk and press enter,can you say what is happening. i am using windows xp professional service pack 2
View 1 Replies View Related
