When I try to start up my machine, the Dell boot screen with the F2 and F12 options appear, but instead of moving on to the Windows XP loading screen, it simply shows a black screen with a blinking cursor in the top left. I cannot type anything with this cursor. There is clearly something wrong with the boot procedure or, I think, with my hard drive. The hard drive (160gb) is new and has been working well since February.I'm using a Dell Inspiron 9300 laptop. I've run Diagnostics with no errors, booted from XP CD to try bootcfg /rebuild, fixboot & fixmbr, and the lengthy chkdsk /r, all to no avail. I've even tried replacing two NTLDR files by copying them from the XP CD. Nothing has worked; I still have a black screen with a flashing cursor when my HDD should be loading. I've tried removing and reinserting the HDD itself, also to no avail. I haven't yet opened the case up to try to see if there's anything to clean or any botched connections, but I don't see how something like that would have happened on its own. All of my components (RAM, HDD, Video Card, Processor, etc.) seem to be recognized in the BIOS menu.
I should note that when I run chkdsk /r, the progress quickly gets to 25%, slows down and takes a while to get to 51%, and then slows down even more and takes maybe two or three hours to complete. I also notice that the progress advances to about 65% sometimes and then returns to 50% again. I've run chkdsk several times now and there's been no improvement in the startup.I realize I could simply reformat and reinstall Windows, but I have a lot of very important data and work stored on my drive that I hadn't had a chance to backup to my external drive. Please let me know if there's a way I can get the startup to work so that I can access my files again.
When I turn my computer on it goes to the blue hp logo and then to a blank screen with a blinking cursor in the top left corner. If I hit f8 when booting it gives me 2 options...f1 to setup and f2 to resume. It won't let me go into safe mode or anything. I have tried booting from the xp cd, but nothing happens. I have tried replacing the battery and that hasn't done anything. It started when trying to open a program, the computer just went blank. When trying to reboot, this mess started.Also, I just got this error message, which is new.i got it after I unplugged the computer for awhile.. warning 251: system cmos checksum bad dafalut config used
I have two HDD. In the 1st one XP and Ubuntu and in the 2nd one FC5. Suddenly the XP is not booting. As I choose XP from boot loader [I use Acronis Boot Manager] it is giving me a blank screen with the cursor blinking at the top left corner. Just that no movement, no XP logo nothing.
I tried fixmbr, fixboot and chkdsk; but in vein. sfc scannow is not supported. Fixmbr and fixboot succeeded but it is giving me the same result. I reinstalled FC5's Grub in the hdb5 [location of FC5's installation] but it does not give me boot option. I then reinstalled FC5's grub in hda1 and atleast now I can access net and look for immediate help from you. I know reinstalation is the last option but I just don't want to do that unless I do not have any more avenues left.
When I try and boot up my computer it gets through the dell boot screen. But when it starts trys to boot up windows I just get a black screen with a blinking cursor in the top rigth hand corner. I didn't do anything out of the ordinary? I updated my internet explorer to IE7, and I updated my I-Tunes. I don't know what could have done it or what I have done. I don't get any error message or anything.
My Dell Inspiron 5150 is having issues installing XP. I am able to boot from the CD, copy over the installation files with no problem, but when I reboot after I choose not to boot from the CD again rather than start XP it just comes up with a black screen with a blinking cursor in the upper left hand corner.
I had alot of processes running on my laptop so I went under msconfig under the Run option and a window popped up and gave me the option under the Startup tab to end processes. I disabled all of it and then I restarted my computer and now windows is not loading and all i see is a black screen with a cursor blinking.
I was working on a computer switching out parts and I put an old motherboard/processor from gateway into a compaq presario computer but it does not accept the Hard disk that came with the compaq. When I power up it loads up the gateway sign and just goes to a black screen and has a blinking cursor. But when I put the Hard Disk that came with the gateway it worked.
I had a copy of windows xp home addition i think. I have a copy of Professional i was going to put on the computer. It was doing the normal load that i have seen window do before when loading on other computers. Then it came to a blue screen that said something to the affect of Windows startup is installing. It used to go to the loading screen then shut itself off and start again. I went to bios trying to figure out why it doesn't load. Now after the blue screen saying it is restarting setup it now goes to a black screen with a blinking cursor that i can move.
My computer crashed the other day and went to a blue screen and said something about dumping physical memory up to 100%. Then it turned off and i restarted it only to end up with a black screen after the bios start up. This has happened before and I fixed it by using a windows xp install disk and reinstalling windows xp. When i tried to do this this time and i chose install my computer says that it cant read the disk. Its not anything to do with the actual disk reader but more of a comp problem that i know can be fixed because my friends dad fixed the same problem for me a long time ago.
I am having a puzzling little problem with my HP desktop computer.I am running windows xp service pack 2.At random times a little cream colored vertical cursor appears at the lower left-hand section of the main desktop screen near to the start tab.It appears every now and then for a few seconds it blinks at a fairly slow rate, then it disappears.Everything else is working fine.The computer boots up fine it doesnt freeze or go to a blue screen.Its just that little annoying cursor that pops up that shouldnt be there.It doesnt belong to any software (like a word processor) that I own.Does anyone have any idea what could be causing it and what I would have to do to make it go away.Has anyone heard of this? I have anti-virus software and its up to date and running.It doesnt detect any viruses.So I am kind of baffled.The cursor doesnt seem to effect anything but its just annoying more so because I dont know whats causing it.At least if I knew what it was maybe I wouldnt feel worried about it.
I built a decent computer system for myself a little a year ago. a few weeks ago, I wanted to have to use two monitors with ATI Radeon 9250, so I bought a DVI/VGA adapter. But I couldn't get both monitors working at at the same time. Since I have a brand new ASUS EAX1300HM512 video card, I figured I'd install and that would do the trick. Well that did not work. Then I tried adding both cards on the MOBO, I could not get both monitors working (I'm sure it was user error). Then I removed the EAX1300One, reboot...from that point on the computer kept rebooting after I logon to Windows. I was able to access the computer through safe mode. After several weeks of using my backup pc, I thought I would try to resolve this problem. I removed the MOBO's battery then put it back. Now the computer powers on and posts, I am able to see the bios but after that i just get a black screen with a blinking cursor.
I believe I got a virus it was stuck on a warning screen. I tried to reinstall window XP now it goes to choose Window XP Professional or Home on Black screen white lettering. It will not let you choose XP is highlighted. Then it goes to black screen with cursor in left hand corner.
I have a Dell Optiplex 210L and if I leave the computer running in Windows XP and come back to it lets say the next day. I have to hold the power button in until it forces a shutdown and then turn it back on to get the computer working. It then works fine until it happens all over again.Computer is running Windows XP SP2.
I've been browsing the web for an answer to my laptop's problem but no luck so far. My laptop specs are: purchased in 2002 AMD athlon 1399MHz Windows XP (recently updated to SP2) 350 MB RAM On boot up, the laptop occassionally starts going very fast when the Windows XP logo is displayed, the DVD drive then starts going crazy, the login window appears but the cursor is blinking very fast and I can't move the mouse
Just wanted to give a solution for an issue that I had on a Dell Optiplex GX270, where it was having problems hanging when a couple of peripheral USB items were plugged in. After I had installed an HP printer, I plugged in an 8Gb thumb drive. It would hang for a very long time until I finally had to reboot. When it went through the short Dell setup screen, it just went black with a flashing underline in the top left corner instead of going to the first Windows startup screen. The funny thing is that I would unplug the HP printer's USB cable while the computer was still powered, and it would immediately start Windows. Through several different test cycles I found that A) Leaving the printer USB cable plugged in during a restart brought up the blank screen w/flashing underscore. B) Not connecting the printer USB cable during a restart brought Windows up properly. That told me that there was a problem with BIOS. I went to the Dell website and flashed my BIOS with the latest update for my computer. That resolved the issue immediately.Hope this helps others resolve similar problems, because it seemed like there
This is my first post on this site, I know that there have been posts on this topic becfore, however mine is different than the rest of the posts. In the other posts,this has occured on a modified computer, but when it happened to me, it was my unmodded computer. So heres what happened. I boot up, and after the HP screen, instead of going to the windows loading screen, I get a message with alot of text, but the main point was that "a failure was imenent", F1 to continue, F2 to enter setup. So i hit F1 to continue, and after a minute of a blank screen and the blinking text dash, the DISK BOOT FAIlURE, INSERT SYSTEM DISK message. But I have never modified my coputer, and never used a setup disk before on this machine. BTW:I tried resetting BIOS, but to no avail.
when he turns it on, it shows the HP logo with the F1 for Setup and such, then it goes straight to a blank screen with a cursor flashing. it's a boot sector problem. I just need to get him booted up so I can do some scans.
I recently tryed installing wubi linux hoping that this would be an optimum way to install ubuntu with out getting errors with my XP installation. But it seems ever since then I now can't access XP. As soon as I login I get my background and my cursor, there is no GUI. I can press Ctrl-Alt-Del to get to task manager, but I can't run anything from it. I can't safe boot, but i can safe boot with cmd. Last known config won't work, chkdsk doesn't make any difference, repair installs don't seem to make a difference and the only thing I can physically notice different is the absence of the Explorer.exe service. I checked my C drive and it's in the correct directory, it's just not starting. I booted into safe mode with cmd and ran msconfig, and explorer.exe isn't listed there either. So I am guessing there is an issue there, and I think that is the root problem; reinstalling XP is a total total last resort. I'd greatly appreciate it if anybody could help, or have any suggestions.
I am using a custom built PC with retail bought Win XP SP2 installed.The PC is about 3 months old now and has run perfectly so far with 2 hard drives and 1 install of XP on the master drive (S-ATA). I redecorated the house and this resulted in the PC being unplugged for about 2 weeks. Havin just plugged it back in and tried to start it, I am getting through the POST stage and then I just get a blank screen with a flashing line at the top left. This used to happen with boot up but disappeared after about five seconds. This one just stays flshing forever.I was wondering if anyone would have any advice for me. If I haven't given any required details please ask and I will post them ASAP.
I deleted some startup files from a WindowsXP Pro machine it was originally a Win98. Which files do I need to get it going XP, 98 or Compaq restore(hope not)? I can only access BIOS. I have no backup!
As I try to load XP it gets past a couple of screens and then just stays with this black one and the cursor blinking in the top left hand corner.Now ive had this problem once b4 but a mate of mine fixed it up and said if it ever happens again to put this floppy in and fix it. Now its happened again and i dont know what he did with that floppy (he is overseas atm).
On startup it will load through the xp logo then goes to a black screen with cursor and freezes. I have tried booting to safe mode with no luck, put drive in external enclosure to reload drivers no luck, tried fixmbr no luck, tried in different case no luck.
DELL XPS 410 XPSP2 - system will not boot past the blinking cursor in the corner. I can't get to the BIOS and the PC will not boot from CD. I have tried to hit F1, F2, F8 andF12 at startup to no avail. I replaced the Video card with a known good card, still no luck.I tried the unplug/plug method for the I/O panel with no changes.The fans are working correctly, so I don't think it was an overheating issue and the power supply is up and running.
I forgot to pull the plug during a thunderstorm and XP home won't boot into the GUI anymore. When trying to start in fail safe mode files seem to be loaded as usual, but at the point where the GUI should be loaded the computer halts and the cursor is blinking in the upper left corner.Have searched MS KB but only found articles about running Fixmbr, chkdisk and fixboot. None worked.
my cursor has been frozen in the middle of the screen at startup. I thought it was my wireless optical mouse, but after switching back to a regular (cabled) mouse, it did it again. I just unplugged, and replugged the mouse and it began working normally. I cleaned my system previously with Spybot, Adaware, Regscrub XP, and have AVG, Zonealarm and MS Spyware updated. I ran AVG and Stinger and found nothing.
I dont know what is going on. I originally was trying to get my webcam to work, it wouldn't so i was going through troubleshooting procedures according to its help menu, and it asked me to unplug all usb devices and replug the webcam only, well i wasn't thinking and I just unplugged the external hardrive and the webcam at the same time without "stopping" it. So then it gaev me a message saying it needed to reboot to complete its update or something i wasn't paying attention cause i thought it just needed to reboot for the webcam so i did, then when i rebooted it would show the COMPAQ screen with the three options at the bottom(ESC for boot menu, F1 for BIOS(Ithink) and F10 for recovery, well then it would go immediately to a black screen w/ a white cursor in top left corner, It would idle there permenantly. I would have to ctrl+alt+del to get it to go back and finally i was looking for a way to use my recovery tools cd, that didn't work at first but then it finally came up and said it could do a recovery where it wouldn't delete my files but it would restore the rest to orignal state, so i went ahead and chose that option. It finished and said to reboot. I did, then it still gets stuck at that black screen, doesn't even show the WINXP screen.so i was looking for a way to figure this out and i went to the ESC menu this is what you see there.
i started a clean install of xp sp3 from a genuine disc, but after formatting the partition and copying files and restarting, the screen gets stuck and all i get is the cursor blinking furiously. I then tried to install some not-so-genuine copies, but no matter what i use, its the same problem. I tried installing linux and it went fine.
I've tried a lot of the spyware, virus stuff, that one guy tried to help me out with but my screen still isnt fixed. It blinks grey and white and cant get to my desktop properties.
Okay well I recently restarted my computer and was stuck with a black screen with a blinking after my video card bios popped up.So I kinda freaked out and restarted it again trying to get into safe mode, did not work at all so I restarted it again and left it on.. nothing happened so I walked upstairs to go on my laptop to think of some stuff that went wrong.. I probably left for a good 25minutes.I figured my harddrive died/my windows OS got corrupted because nothing was booting. Came back downstairs and restarted it again and now it is properly working. my problem is I'm kinda afraid to restart it again and have it not properly work.is there anything I can do to backup my data like move to somewhere safe on my hd if i wanted to reinstall windows?
A while ago i maximized console window while it was running, and it just stayed that way.Now whenever any programs run any console commands, my whole screen starts blinking since the windows are opened and closed, forcing my monitor to switch between resolutions at a really high speed
my computer has started freezing after startup. Well, I say the computer has started freezing, but it's stranger than that. Pretty much as soon as I log into Windows, the taskbar freezes up. Mousing anywhere on the taskbar causes the cursor to turn into the hourglass. The system tray icons are frozen as well. This happens every time the computer starts up.
Desktop items are all clickable and somewhat usable, but to a limited extent. For example, I can open "My Computer" but then explorer freezes if I double-click on either hard drive. I have a videos folder on the desktop that I can open, but if I then try to play any of the videos, Windows Media Player opens with a blank white screen and never actually starts playing the video.
