Boot Sequence - Blank Screen
Jun 9, 2010
I have been having a boot up issue on my compaq presario sr1630nx. When I turn on the computer now it takes me to the boot screen where I press F2 and the little dash up in the corner flashes for a second or two...disapears...and then nothing...black screen. I then have to turn the computer off manually but when I turn the computer on again and it goes to the boot screen and I press F2 again and it takes me to the default start windows normally prompt.
I hit enter and then it boots up like normal and everything is fine with the world and my computer runs just fine until the next time I turn it off and have to turn it on again. Same routine at every boot. Was wondering if the brown out may have corrupted my boot.ini file somehow and if so how to fix it. My computer was on when the power spiked twice in a two minute period then was off for a couple of hours so it could be a hardware issue as well. I have Windows xp home edition
View 6 Replies
ADVERTISEMENT
Oct 26, 2007
On boot sequence, PC hangs on Windows boot screen - with the good old progress bar churning along for eternity. It just stays there. It is possible to boot into safe mode, safe mode with networking, etc. but never boots up normally. 'Last Known Good..." does not help at all.
I have tried 'repairing' XP using the recovery console (deleting the boot.ini file, then BOOTCFG /REBUILD and then FIXBOOT) to no avail. Do not know where in the boot process it is getting hung up and not totally sure how to determine that.Using Windows XP Media Center Edition with SP2. Plenty of RAM and disk space.
Had this problem once in the past and it seemed to self correct after about 50 reboots.
Does this sound like a re-install of XP is required or are there any other options that might work?
View 2 Replies
View Related
Jun 20, 2008
When i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
View 3 Replies
View Related
Apr 1, 2005
I am getting a blank screen with a white pointer when I boot up my machine. And when I try to boot up safe mode it does the same thing only with safe mode written in the four corners. Could someone please tell me what is going on.
View 3 Replies
View Related
Aug 23, 2005
I have windows xp prof running and now when i turn on the computer it boots up, goes to the logo, and then the screen goes blank. The hard drive is still working, and i can go into safemode (f8) but every time i try to startup normally the screen just goes blank, the monitor says there is no signal. I have no clue how to go about resolving this.
View 5 Replies
View Related
May 11, 2007
I have a computer I have built and upgraded several times for my step-son. The issue I am having is after startup or a reboot the computer goes through post and then I get a blank screen for 10-15 seconds. Then I get a serrated white load bar that runs the length of the screen at the bottom it takes about 3-5 minutes to load. Then I get the Windows load screen which takes about 10-15 seconds and then I get the account icons and everything is fine. I am not sure what this white load bar is from and it is really slowing down the boot times. The computer has gone through an upgrade and the issue still persists, which I expected. I upgraded the motherboard, processor, and video card.
View 2 Replies
View Related
Jul 27, 2007
I am using a custom built PC with retail bought Win XP SP2 installed.The PC is about 3 months old now and has run perfectly so far with 2 hard drives and 1 install of XP on the master drive (S-ATA). I redecorated the house and this resulted in the PC being unplugged for about 2 weeks. Havin just plugged it back in and tried to start it, I am getting through the POST stage and then I just get a blank screen with a flashing line at the top left. This used to happen with boot up but disappeared after about five seconds. This one just stays flshing forever.I was wondering if anyone would have any advice for me. If I haven't given any required details please ask and I will post them ASAP.
View 7 Replies
View Related
May 9, 2005
computer that won't boot up. I have an E-Machines T2825 running Windows XP Home Ed. that crashed after loading a wireless router and System Mechanic program on it. We bought another E-Machines computer (T6212) I networked the 2 with a Linksys Wireless - G Broadband Router. After that I loaded System Mechanic5 on both computers. After running a scan on the T2825, it told me that the hard drive needed to be de-fragged so I did it. Then, few days later, the T2825 started having problems when running programs on it. It would freeze up and the only way to shut it down was to disconnect the main power. After plugging it back in and turning the power on, it froze up just trying to open IE6.
View 14 Replies
View Related
Jan 22, 2008
When I turn on my lap top, Acer Travelmate 2355LC, there are a couple of quiet clicks, then nothing. If left for about 10 minutes, it starts up normaly. Sometimes it starts normally from the beginning.It has an Intel Celron M360 processor (1.4 GHz, 400 MHz FSB, 1MB L2 cache) 40 BG HDD 256MB DDR, I've cleaned everything up. Should I try and repair? I would like to avoid reformatting if possible.
View 2 Replies
View Related
Aug 6, 2007
A friend of mine called me to his house to take a look at his gateway. All I know is that it runs Windows XP.He states that AVG antivirus prompted him to restart his computer once the virus definitions update completed. Once he restarted, a blank screen appeared and said, "Invalid Boot Disk, please insert in drive a:"Problem is, there is no disks in any drive.
View 8 Replies
View Related
Jul 10, 2007
When I turn my computer on it goes to the blue hp logo and then to a blank screen with a blinking cursor in the top left corner. If I hit f8 when booting it gives me 2 options...f1 to setup and f2 to resume. It won't let me go into safe mode or anything. I have tried booting from the xp cd, but nothing happens. I have tried replacing the battery and that hasn't done anything. It started when trying to open a program, the computer just went blank. When trying to reboot, this mess started.Also, I just got this error message, which is new.i got it after I unplugged the computer for awhile.. warning 251: system cmos checksum bad dafalut config used
View 11 Replies
View Related
Aug 19, 2007
My comp is acting weird so i decided to either repair windows or reinstall windows, but after it says press any key to boot from cd, and i press a key, i get a blank screen or it loads windows.
View 14 Replies
View Related
Feb 3, 2010
Just wanted to give a solution for an issue that I had on a Dell Optiplex GX270, where it was having problems hanging when a couple of peripheral USB items were plugged in. After I had installed an HP printer, I plugged in an 8Gb thumb drive. It would hang for a very long time until I finally had to reboot. When it went through the short Dell setup screen, it just went black with a flashing underline in the top left corner instead of going to the first Windows startup screen. The funny thing is that I would unplug the HP printer's USB cable while the computer was still powered, and it would immediately start Windows. Through several different test cycles I found that A) Leaving the printer USB cable plugged in during a restart brought up the blank screen w/flashing underscore. B) Not connecting the printer USB cable during a restart brought Windows up properly. That told me that there was a problem with BIOS. I went to the Dell website and flashed my BIOS with the latest update for my computer. That resolved the issue immediately.Hope this helps others resolve similar problems, because it seemed like there
View 1 Replies
View Related
Dec 6, 2006
I have a problem with my PC. A few days ago I received a URL in MSN messenger that infected me with a trojan horse when I entered the site.
Since then, AVG antivirus has popped up every time I startup my computer and has told me "threat detected - trojan horse downloader." I proceed to heal the file, yet next time I start up the same thing happens. The file name is simply "installer.exe". Immediately after this, my internet explorer opens and opens "web.links4all.biz",which I believe re-infects me. Since then, I have worked with my PC for a few days, with the intention of coming on here and sorting out the problem when I get the chance, unfortunately, the problem has escalated.
During my usual practice, AVG popped up saying "threat detected" once again. This time, the problem was "Trojan horse flooder." I told it to heal the file, it said it was healed, but told me I had to restart my computer for the process to complete.I restarted my computer, but after the first windows loading screen, the system shuts off and automatically reboots, until it reaches this point where the same thing happens.
I've tried using safe mode, and nothing has changed, it still enters the cycle of restarting continually.
View 14 Replies
View Related
Aug 15, 2007
I´m looking to hide the whole boot sequence, meaning that I don´t want to disable memory tests and other things in the BIOS, just hide it visually.. The same goes for the windows XP boot screen.. I want to keep it all from being displayed; only let it run in the background and just display things when the system is up and running..
Any tips or links for this?
View 2 Replies
View Related
Sep 4, 2009
I have Win XP PC Dual Core two point sixty six Giga Hz Pentium takes about fifteen Minutes to arrive at the Windows Boot Up Screen nearly 5 Minutes to go beyond Drive Detection any ideas ?
View 2 Replies
View Related
Nov 24, 2008
Need to re-boot with CD to get to recovery console, and when I get to the boot menu CD/CD-ROM is in the # 3 spot and I can't get it to move to the # 1 spot. when I get to the boot menu, all I'm able to do is move the curser up/down to highlight the 3 choices but not change the sequence. Now i can't change the boot sequence.
View 2 Replies
View Related
Jul 12, 2009
I'm trying to get back to factory install with XP on an Acer Travelmate 8100. Have all the recovery disks, but only thing is the f2 key doesn't work.
I need this to make it boot from the CD and get back to how it was when I first bought it.
Do you know a way round this?
View 7 Replies
View Related
Dec 8, 2004
I can't change the boot sequence in xp pro i get to the bios but when i go to change the first boot process and presses enter nothing happens
I logged on as admin and has done this before with this machine but now nothing happens my feeling is she has some kind of virus or somthing as her machine is quite slow but the anti virus program is not respondind neither is the restore option and im sure other programs
I want to use my restore disk but if i can't change the boot sequence how can i run it?
View 7 Replies
View Related
Sep 30, 2006
I have two older IBM 300PL computers and I want to change the boot sequence but I cannot figure out how to get into the BIOS. So far I have not found it anywhere and I have searched and I have tried to scour the setup options by pressing F1 right from the beginning. I am trying to load in a new OS, but if I cannot get it to boot off of the A,D, and then C, then it won't work. How to change the boot sequence in one of these IBM computers?
View 5 Replies
View Related
Mar 22, 2010
This is my first post on this site, I know that there have been posts on this topic becfore, however mine is different than the rest of the posts. In the other posts,this has occured on a modified computer, but when it happened to me, it was my unmodded computer. So heres what happened. I boot up, and after the HP screen, instead of going to the windows loading screen, I get a message with alot of text, but the main point was that "a failure was imenent", F1 to continue, F2 to enter setup. So i hit F1 to continue, and after a minute of a blank screen and the blinking text dash, the DISK BOOT FAIlURE, INSERT SYSTEM DISK message. But I have never modified my coputer, and never used a setup disk before on this machine. BTW:I tried resetting BIOS, but to no avail.
View 6 Replies
View Related
Oct 20, 2009
Dell inspiron 510 laptop starts with dell logo XP logo and moving bar below then grey blank screen instead of users names only blank screen with moveable cursir used yesterday as normal except i did defrag
View 3 Replies
View Related
Apr 1, 2005
How to access the advanced option table (don't know how that's called) ? the one some computers can access by hitting the delete key. But it doesn't work for my computer.. Or is there any way to change the boot sequence?
View 1 Replies
View Related
May 23, 2007
I am running Windows XP (SP2) on an eMachines T2080 desktop. All Windows security patches and other OS updates are current. McAfee virus scan is run weekly, as is SpyBot S&D and AVG/Ewido. I am running a GeForce FX 5200 graphics card with up-to-date drivers
The problem is, while using this computer, i had a hung-up process that was slowing things down. After doing CNTL-ALT-DEL to see the process list, i accidentally shut down the explorer process, thinking it was a hung-up internet explorer. Naturally, the computer shut down, but ever since, it does not seem to want to boot appropriately. From a cold power-up, it will go through the "Windows" logo screen with the blue scrolling bar for about 10 seconds, then the screen goes black and stays black for about a minute. Rather than coming to the light blue screen where the user-id's live, the system instantaneously flashes a "blue screen" (with some white characters on the screen), however, it's so fast that I can't read it, nor can I get a screen shot of it. Once that blue screen flashes, it goes back and tries to boot again, only it gives me the options of safe mode, start windows normally, start from last known good configuration, etc. I can boot up just fine in safe mode, but the blue screen phenomenon happens for all the other options. I have tried a system restore to a previous day, and that doesn't work either.
any ideas on how to proceed, short of an OS reinstall / repair. I have seen some suggestions for CMOS battery replacement,I can copy any utility files I need just fine while in safe mode, but I'd like to try and do additional troubleshooting
View 5 Replies
View Related
Sep 24, 2009
Windows XP will not boot. After the first "Dell" screen, a blinking underscore appears on a blank page. The hard drive and all hardware are fine, as confirmed by friend computer wizards. This is without doubt a software problem.
I burned SLAX (a linux derivative) to a live CD and set my BIOS to boot from CD. SLAX is fantastic, but I wonder if I can restore windows to a previous point or investigate my boot sequence using SLAX's file manager There is a high likelihood that I have a trojan.
Side question: Would you recommend trend micro antivirus over norton? is there another antivirus option you'd recommend more highly than both of these?
View 2 Replies
View Related
Sep 27, 2009
System Restore problem I've been having.I did a system restore on my laptop and then got error messages when attempting to restore back to the present time) but as of just now I have a new, much more pressing problem. I restarted my laptop in safe mode an hour or so ago to attempt to do a system restore while in safe mode, just to see if that might work since I always get an error when trying to do a system restore normally.
The system restore loaded up and the blue progress bar got about 1/6th of the way across and then stopped. I let it load and after 45 minutes of absolutely no progress in starting up with the system restore, I manually shut down the computer. I turned it on again after a minute and it began to boot up, showed the HP logo, went black, then the Windows XP loading screen, went black, then the HP logo again, black again, Windows XP loading screen again, etc and just looped again and again. I let it continue this for about 15 minutes but it just kept looping. I pressed the F8 key while it was doing this and selected it to start in Safe Mode, only to have the same looping sequence continue again and again. I had to manually shut down the laptop again, and after attempting to turn it on and have it boot up a few more times I've run into nothing but more of the same endless looping process.
What can I do about this? What caused it and is there any way to fix it? I'd really like a way to access or save my data, which I can't do now since the computer is doing nothing but looping the boot sequence. i have Prof SP2
View 3 Replies
View Related
Mar 15, 2010
When my bios boot sequence is set to boot from CD, a 'press any key to boot from disk' sign should come up during boot-up.
It doesn't (it always used to when I set CD drive, not HD as first boot). I have not got the bios HD set as first boot, but have set it to boot from CD as first boot. When I boot up it goes straight to my HD / XP OS !
I need to boot from disk and I can't work out why the bios boot sequence I have set and saved is being ignored. My bios is not buggy and has never caused any problems until this issue. I have a MSI K9N Platinum mobo.
View 8 Replies
View Related
May 20, 2006
I have Windows 2000 Pro running. I have two 120 GB HDs. One is C, the other is D and E.
I tried to install Partition Commander. I decided that I did not want to install it, so I exited the program. Then I went to remove software and indicated that i wanted to remove it. It accomplished all OK.
Now, when I restart from a power off, the black and white boot sequence stops and asks if I want to boot from master boot 0, 1, 2 or 3. I indicate 0, and it boots OK. How do I get rid of this problem? My computer used to boot from off to my Windows desktop, nonstop.
I was trying to change partition sizes but decided to keep what I have.
View 5 Replies
View Related
Apr 24, 2007
What would cause me to have to change my boot sequence everytime to get my computer to boot into windows ? When it restarts after I change the boot sequence it goes right into windows xp. I recently had a new hard drive and more memory put in the computer. It will not boot into windows xp until I go into my setup and change the boot sequence everytime. Then it will boot into windows. The computer is about 6 years old and windows xp was an upgrade to 98. Once the computer is in windows it works just fine. Changing the bood sequence everytime is a bummer.
View 1 Replies
View Related
Sep 11, 2010
MY BOOT SEQUENCE IS ALL OUTTA ORDER AND IT WONT BOOT HELP
View 1 Replies
View Related
Dec 21, 2004
I'm having trouble when I enter my BIOS. It seems that once I enter, I can't move up or down or do anything at all. At first, I thought it migt be my keyboard, but I switched my keyboard with the keyboard from my other computer. It still had the same problem. I don't know why my BIOS won't let me do anything. Can anyone please help? I just want to change the boot sequence so I can wipe my drive
View 10 Replies
View Related
