Boot Sequence Hangs At Logo Boot Screen With Progress Bar
Oct 26, 2007
On boot sequence, PC hangs on Windows boot screen - with the good old progress bar churning along for eternity. It just stays there. It is possible to boot into safe mode, safe mode with networking, etc. but never boots up normally. 'Last Known Good..." does not help at all.
I have tried 'repairing' XP using the recovery console (deleting the boot.ini file, then BOOTCFG /REBUILD and then FIXBOOT) to no avail. Do not know where in the boot process it is getting hung up and not totally sure how to determine that.Using Windows XP Media Center Edition with SP2. Plenty of RAM and disk space.
Had this problem once in the past and it seemed to self correct after about 50 reboots.
Does this sound like a re-install of XP is required or are there any other options that might work?
View 2 Replies
ADVERTISEMENT
Jun 9, 2010
I have been having a boot up issue on my compaq presario sr1630nx. When I turn on the computer now it takes me to the boot screen where I press F2 and the little dash up in the corner flashes for a second or two...disapears...and then nothing...black screen. I then have to turn the computer off manually but when I turn the computer on again and it goes to the boot screen and I press F2 again and it takes me to the default start windows normally prompt.
I hit enter and then it boots up like normal and everything is fine with the world and my computer runs just fine until the next time I turn it off and have to turn it on again. Same routine at every boot. Was wondering if the brown out may have corrupted my boot.ini file somehow and if so how to fix it. My computer was on when the power spiked twice in a two minute period then was off for a couple of hours so it could be a hardware issue as well. I have Windows xp home edition
View 6 Replies
View Related
May 21, 2005
On a HP Pavillion with Win XP Home the display goes blank after the Boot UP logo with the sliding progress graphic.I've tried all the safe modes and the last driver it shows loading is agp440.sys and then nothing else ever happens.I tried installing another video card and had the same symptoms.Knoppix boots with just a passed mode error but continues and appears to work OK.I belive that HP's restore image on the HD will wipe out the primary partion so I am hoping that someone can point out another way to fix this.
View 13 Replies
View Related
Aug 23, 2005
I have windows xp prof running and now when i turn on the computer it boots up, goes to the logo, and then the screen goes blank. The hard drive is still working, and i can go into safemode (f8) but every time i try to startup normally the screen just goes blank, the monitor says there is no signal. I have no clue how to go about resolving this.
View 5 Replies
View Related
Aug 9, 2010
it all started when I ran Nod32 antivirus. I ran it because I had some viruses on my computer that I wanted to get rid of. After the scan there were 180 some detected objects that were quarantined or deleted. So then I restart my computer and after the windows xp logo there is just a black screen with no cursor. And after awhile the computer will just restart and try booting up again. I tried going into safe mode and safe mode with command prompt but I still get a black screen with no cursor. The last known good configuration doesn't work either. I'm pretty frustrated because I did nothing wrong. I am also having a feeling that nod32 might have quarantined some infected files that are essential for Windows Xp to boot. I also do not have any windows xp disks with me how to fix this?
View 11 Replies
View Related
Dec 26, 2004
I had been away from my computer for about an hour and when i returned the screen was black and nothing would change it so hit the restart button. When the computer started up, I first saw the usual blue dell logo-screen, however, the next screen was the windows 98 startup logo-screen. The computer then entered DOS mode and at the top of the screen it says Microsoft Windows 98. This problem persists every time i start the computer. I only have 1 primary partion and i installed XP on it from a clean install by using a win98 bootdisk to format and running winnt from the i386 folder of the xp cd. When i try to enter SAFE MODE the computer goes to the Win 98 start-up logo screen again and enters DOS again. I know that all my files are still on the HDD because i can navigate through them. All i really want to do is somehow save some files that are on te HDD so i can just format and reinstall XP.
View 4 Replies
View Related
Jun 15, 2006
my PC, after the xp logo, it hangs, i have to restart about 3 times to fix it, i have ran anti virus, and spyware scan, i think its a software/driver issue, any ideas how i can figure out what it is?
View 2 Replies
View Related
Jul 11, 2005
When I try normal boot, windows hangs up on XP logo screen. The hdd indicator tells me there is no more hdd access.When using save mode, windows starts until black screen with note "save mode" in the edges appears, then hangs up, also no more hdd access.Booting with options "last known working config" and other options does not work, too. (always the same result - hang up with no more hdd action).In my last working session i did not change any config, installed programs or so. Just using office package, acrobat, photoshop, icq and skype.Shutdown without any problems.
View 8 Replies
View Related
Jan 8, 2006
I Installed A New Programme Which Was Downloaded From Bit Torrent
Blue Screen - Memory Dump
Rebooted And Now It Just Hangs On Windows Xp Logo Screen.
Tried To Boot Using Safe Mode But No Joy.
Also Tried To Use The Restore Disks And The Xp Disk Itself But It Would Not Boot From Those.
What Do I Do Now? I Dont Want To Format The Drive And Loose All My Files.
View 2 Replies
View Related
Feb 21, 2007
when I first start the computer, windows hangs between the black windows logo screen and the first blue screen that says "windows is starting". I have to hit the reset button, it goes to the dos screen with the safe mode, etc. choices. I choose "start using last known good configuration" and I'm good to go. If I turn the computer off during the day and turn it back on, It works fine. It only hangs on the first start of the day.
View 10 Replies
View Related
Aug 30, 2002
I have an intermittent problem, xp hangs occassionaly at the boot screen. If I unplug the system when not in use it doesn't happen as often. WEIRD. When it does happen I have to leave the system unplugged for about 5 minutes or it won't boot. This has been happening ever since I upgraded to home XP from ME. It is a legal XP CD. I have a new amd athelon 1.2 motherboard and XP drivers for my hardware.I even reinstalled XP but the problem persists.
View 1 Replies
View Related
Jul 19, 2004
Hey I'm running an ASUS K8V-SE Deluxe mobo w/ Windows XP Pro. When I turn on my computer it sort of hangs up on the first screen where it shows the ASUS manufacturers logo or whatever. I believe this is where it is running POST tests in the background, I've hit DELETE before to see whats happening during this and its auto detecting Primary Drives and stuff like that. Well within 20-30 seconds of that the screen goes blank and theres a one little blinking cursor for about 3 seconds then the cursor jumps down a line and blinks twice and finally the Windows XP loading screen comes up.
View 14 Replies
View Related
Feb 12, 2006
booting my cpu because it hangs at the loading screen. I have read a lot of posts but none of them help because I can't get the cpu in safe mode. I have tried all the options and all kinds of boot disks.It won't let me use my keyboard to highlight any of the options where it says windows had problems loading and gives several options like safe mode or last good config. The keyboard will let me into the bios but after that it won't work. f8 won't take me to safe mode and it won't boot to the cd either. I had this problem once a few weeks back but I created a boot disk and after I booted from that for several times it started booting on it's own. I got the boot disk from a web site but it wasn't an xp boot disk.(i think it was an 98se or me disk) Well of course now either I have lost the disk or it just won't work anymore. I need to find a way to at least boot it long enough to get the data off. the file system is ntfs and I am using windows xp pro.
View 5 Replies
View Related
Jan 13, 2008
My XP has recently started freezing after the xp loading screen. I have to restart several times for it to work properly. I've tried to fix it with registry scanners etc.
View 8 Replies
View Related
Aug 20, 2010
I just bought a Seagate ST3400620NS SATA HDD. I want to install it as a second HDD just for storage. I currently have a ST380815AS with the OS (XP SP3) on it as the primary drive. The PC (HP DC570 SFF) boots fine with only the primary drive installed. When I add the 2nd HDD the the system recognizes that I have added a 2nd HDD. It asks me to save the settings by pressing F1. I do that. The XP boot screens displays. The blue progress bar moves once and the system reboots. I switched SATA connectors for the 2nd HDD but when I boot I get a message that I need to move the connector back to the original spot.Then I thought maybe the MOBO (Hewlett-Packard 0A64h ) only supported 1.5 gb/s. Not the case. So I am totally stumped. I checked HPs website to see if there were any updates, and there was an advisory that a different model Seagate HDD might cause a similar sounding problem but no mention of the model HDD that I own.
View 2 Replies
View Related
Dec 6, 2006
I have a problem with my PC. A few days ago I received a URL in MSN messenger that infected me with a trojan horse when I entered the site.
Since then, AVG antivirus has popped up every time I startup my computer and has told me "threat detected - trojan horse downloader." I proceed to heal the file, yet next time I start up the same thing happens. The file name is simply "installer.exe". Immediately after this, my internet explorer opens and opens "web.links4all.biz",which I believe re-infects me. Since then, I have worked with my PC for a few days, with the intention of coming on here and sorting out the problem when I get the chance, unfortunately, the problem has escalated.
During my usual practice, AVG popped up saying "threat detected" once again. This time, the problem was "Trojan horse flooder." I told it to heal the file, it said it was healed, but told me I had to restart my computer for the process to complete.I restarted my computer, but after the first windows loading screen, the system shuts off and automatically reboots, until it reaches this point where the same thing happens.
I've tried using safe mode, and nothing has changed, it still enters the cycle of restarting continually.
View 14 Replies
View Related
Aug 15, 2007
I´m looking to hide the whole boot sequence, meaning that I don´t want to disable memory tests and other things in the BIOS, just hide it visually.. The same goes for the windows XP boot screen.. I want to keep it all from being displayed; only let it run in the background and just display things when the system is up and running..
Any tips or links for this?
View 2 Replies
View Related
Sep 4, 2009
I have Win XP PC Dual Core two point sixty six Giga Hz Pentium takes about fifteen Minutes to arrive at the Windows Boot Up Screen nearly 5 Minutes to go beyond Drive Detection any ideas ?
View 2 Replies
View Related
Nov 24, 2008
Need to re-boot with CD to get to recovery console, and when I get to the boot menu CD/CD-ROM is in the # 3 spot and I can't get it to move to the # 1 spot. when I get to the boot menu, all I'm able to do is move the curser up/down to highlight the 3 choices but not change the sequence. Now i can't change the boot sequence.
View 2 Replies
View Related
Jul 12, 2009
I'm trying to get back to factory install with XP on an Acer Travelmate 8100. Have all the recovery disks, but only thing is the f2 key doesn't work.
I need this to make it boot from the CD and get back to how it was when I first bought it.
Do you know a way round this?
View 7 Replies
View Related
Dec 8, 2004
I can't change the boot sequence in xp pro i get to the bios but when i go to change the first boot process and presses enter nothing happens
I logged on as admin and has done this before with this machine but now nothing happens my feeling is she has some kind of virus or somthing as her machine is quite slow but the anti virus program is not respondind neither is the restore option and im sure other programs
I want to use my restore disk but if i can't change the boot sequence how can i run it?
View 7 Replies
View Related
Sep 30, 2006
I have two older IBM 300PL computers and I want to change the boot sequence but I cannot figure out how to get into the BIOS. So far I have not found it anywhere and I have searched and I have tried to scour the setup options by pressing F1 right from the beginning. I am trying to load in a new OS, but if I cannot get it to boot off of the A,D, and then C, then it won't work. How to change the boot sequence in one of these IBM computers?
View 5 Replies
View Related
Sep 9, 2009
i have ONE hard drive with partitions. I had a really bad setup first, I had 1 partition with 3 windows installs on it, folders like WINDOWS, WINPRO, WINN, I never took the time to delete them or whatever, and I was using winpro as my main OS. When I was running the above setup, when I boot up it would ask me: Select what OS to load Windows Pro, Windows Home, Windows Home
I decieded to install Windows 7 Ultimate 64 bit, worked flawlessy, but I wanted to go back to windows xp pro 64 bit. So I made a new partition and installed windows XP pro 64 bit onto it. when I tried installing windows xp with my CD, the first part would work fine, but then when it restarted to continue the setup, it would load my MOBO logo and then after, it would just show a blinking underscore "_" on the top left corner, and nothing else.
I managed to install a fresh windows xp from my USB flash drive, but when booting up normally it still does not let me select what OS to log on to, it just shows the blinking underscore in the top left after the MOBO logo passes, I actually have to boot by USB drive to boot this fresh install of windows. I think something is wrong with my boot loader, but have no idea how to fix it.
View 1 Replies
View Related
Apr 1, 2005
How to access the advanced option table (don't know how that's called) ? the one some computers can access by hitting the delete key. But it doesn't work for my computer.. Or is there any way to change the boot sequence?
View 1 Replies
View Related
May 23, 2007
I am running Windows XP (SP2) on an eMachines T2080 desktop. All Windows security patches and other OS updates are current. McAfee virus scan is run weekly, as is SpyBot S&D and AVG/Ewido. I am running a GeForce FX 5200 graphics card with up-to-date drivers
The problem is, while using this computer, i had a hung-up process that was slowing things down. After doing CNTL-ALT-DEL to see the process list, i accidentally shut down the explorer process, thinking it was a hung-up internet explorer. Naturally, the computer shut down, but ever since, it does not seem to want to boot appropriately. From a cold power-up, it will go through the "Windows" logo screen with the blue scrolling bar for about 10 seconds, then the screen goes black and stays black for about a minute. Rather than coming to the light blue screen where the user-id's live, the system instantaneously flashes a "blue screen" (with some white characters on the screen), however, it's so fast that I can't read it, nor can I get a screen shot of it. Once that blue screen flashes, it goes back and tries to boot again, only it gives me the options of safe mode, start windows normally, start from last known good configuration, etc. I can boot up just fine in safe mode, but the blue screen phenomenon happens for all the other options. I have tried a system restore to a previous day, and that doesn't work either.
any ideas on how to proceed, short of an OS reinstall / repair. I have seen some suggestions for CMOS battery replacement,I can copy any utility files I need just fine while in safe mode, but I'd like to try and do additional troubleshooting
View 5 Replies
View Related
Sep 24, 2009
Windows XP will not boot. After the first "Dell" screen, a blinking underscore appears on a blank page. The hard drive and all hardware are fine, as confirmed by friend computer wizards. This is without doubt a software problem.
I burned SLAX (a linux derivative) to a live CD and set my BIOS to boot from CD. SLAX is fantastic, but I wonder if I can restore windows to a previous point or investigate my boot sequence using SLAX's file manager There is a high likelihood that I have a trojan.
Side question: Would you recommend trend micro antivirus over norton? is there another antivirus option you'd recommend more highly than both of these?
View 2 Replies
View Related
Dec 26, 2004
I originally had XP Pro when the problem first started. When booting, the normal boot screen will come up with the "compaq" logo and F1 for setup f10 for restore, and then normally proceeds to the windows xp pro screen with the scrolling bar at the bottom. Now on boot, this bar will stay scrolling acting like it is trying to boot and it takes literally anywhere from 6 hours to 3 days to start up. I used restore points and the same thing happened. When I start in safe mode, the normal safe mode multidisk prompt comes up and even that will stay on winsys32driversagp330.sys for the same amount of hours before it finally boots up. I also reinstalled my windows xp.
View 1 Replies
View Related
Dec 10, 2004
My computer shutdown and on boot up it hangs at the black screen showing the white bar at the bottom. I have Windows 98 and 2000 on my computer and neither will boot up from C:, CDROM, or StartUp/BootUp disks. When I try to boot up from the Windows 2000 boot up disk it sometimes will not get passed the blue screen showing 'Windows 2000 setup. Once or twice it has shown some functions in the bar at the bottom of the page. I have tried to boot up using Windows 98 start up disk but most times it hangs at C:. Last night it did open Windows 98 but would not let me reinstall 2000 or do a repair. It now is hanging in both OS. I am told it could be my memory...but how do I check? Upon start up my memory check shows all is okay. I have ran the utility disk for my hard drive and it says all is okay. Before I invest in new memory is there anything else I should check or try? My computer is older and the memory is quite expensive.
View 8 Replies
View Related
Sep 27, 2009
System Restore problem I've been having.I did a system restore on my laptop and then got error messages when attempting to restore back to the present time) but as of just now I have a new, much more pressing problem. I restarted my laptop in safe mode an hour or so ago to attempt to do a system restore while in safe mode, just to see if that might work since I always get an error when trying to do a system restore normally.
The system restore loaded up and the blue progress bar got about 1/6th of the way across and then stopped. I let it load and after 45 minutes of absolutely no progress in starting up with the system restore, I manually shut down the computer. I turned it on again after a minute and it began to boot up, showed the HP logo, went black, then the Windows XP loading screen, went black, then the HP logo again, black again, Windows XP loading screen again, etc and just looped again and again. I let it continue this for about 15 minutes but it just kept looping. I pressed the F8 key while it was doing this and selected it to start in Safe Mode, only to have the same looping sequence continue again and again. I had to manually shut down the laptop again, and after attempting to turn it on and have it boot up a few more times I've run into nothing but more of the same endless looping process.
What can I do about this? What caused it and is there any way to fix it? I'd really like a way to access or save my data, which I can't do now since the computer is doing nothing but looping the boot sequence. i have Prof SP2
View 3 Replies
View Related
Mar 15, 2010
When my bios boot sequence is set to boot from CD, a 'press any key to boot from disk' sign should come up during boot-up.
It doesn't (it always used to when I set CD drive, not HD as first boot). I have not got the bios HD set as first boot, but have set it to boot from CD as first boot. When I boot up it goes straight to my HD / XP OS !
I need to boot from disk and I can't work out why the bios boot sequence I have set and saved is being ignored. My bios is not buggy and has never caused any problems until this issue. I have a MSI K9N Platinum mobo.
View 8 Replies
View Related
May 20, 2006
I have Windows 2000 Pro running. I have two 120 GB HDs. One is C, the other is D and E.
I tried to install Partition Commander. I decided that I did not want to install it, so I exited the program. Then I went to remove software and indicated that i wanted to remove it. It accomplished all OK.
Now, when I restart from a power off, the black and white boot sequence stops and asks if I want to boot from master boot 0, 1, 2 or 3. I indicate 0, and it boots OK. How do I get rid of this problem? My computer used to boot from off to my Windows desktop, nonstop.
I was trying to change partition sizes but decided to keep what I have.
View 5 Replies
View Related
