Reboot Or Select Appropriate Boot Device
Jan 11, 2007
I just changed cases for my computer and now when I start it you hear 1 beep (i have AMI BIOS) It then goes to what looks like a command and then the message Reboot or select appropriate boot device or insert boot media pops up. I have checked all my connections and tried it every which way. I have went inside and out of the BIOS and still no luck. I have also tried reinstalling Windows XP, but it says restart the computer and when I do it doesn't continue the installer. Instead it says reboot or select appropriate boot device or insert boot. I also get the error of Overclocking Error.I have a 2.79 Pentium 4 HyperThreading processor, ASUS P4S800D-X, ATI X800XL AGP, Tech-link 425w PSU, 3 sticks Kingston 512mb 333mhz PC3200 RAM, Samsung Spinpoint 120GB ATA hard drive, LG DVD-RW-DL burner, and a standard floppy.
View 1 Replies
ADVERTISEMENT
Dec 17, 2007
I haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
View 9 Replies
View Related
Apr 22, 2010
How can I Reboot and select proper boot device or insert boot media wnidows xp without cd.It is possible.
View 1 Replies
View Related
Nov 11, 2006
I am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
View 1 Replies
View Related
Aug 7, 2007
When my laptop gets to the point in XP where you can select user and put in a password, There are no users to select from. the only option given is to shutdown, reboot etc.
View 4 Replies
View Related
Sep 9, 2009
i have ONE hard drive with partitions. I had a really bad setup first, I had 1 partition with 3 windows installs on it, folders like WINDOWS, WINPRO, WINN, I never took the time to delete them or whatever, and I was using winpro as my main OS. When I was running the above setup, when I boot up it would ask me: Select what OS to load Windows Pro, Windows Home, Windows Home
I decieded to install Windows 7 Ultimate 64 bit, worked flawlessy, but I wanted to go back to windows xp pro 64 bit. So I made a new partition and installed windows XP pro 64 bit onto it. when I tried installing windows xp with my CD, the first part would work fine, but then when it restarted to continue the setup, it would load my MOBO logo and then after, it would just show a blinking underscore "_" on the top left corner, and nothing else.
I managed to install a fresh windows xp from my USB flash drive, but when booting up normally it still does not let me select what OS to log on to, it just shows the blinking underscore in the top left after the MOBO logo passes, I actually have to boot by USB drive to boot this fresh install of windows. I think something is wrong with my boot loader, but have no idea how to fix it.
View 1 Replies
View Related
Dec 17, 2005
I gotta a XP Home SP2 Machine was running fine then on boot up sound device not found. went to device mng and no items displayed. System restore had been didabled and Norton disabled as well. Done a spyware scan pull nout so did virus
View 3 Replies
View Related
Jan 27, 2005
When booting up (XP), I get to the screen where I select the user name and enter the password. Then I get my usual wallpaper screen but no icons, start button, task bar, tray etc etc. I can't right click on the screen.
I CAN do Crtl+Alt+Del and get a run prompt up and browse the various drives (and even run software through this, e.g. internet) but the desktop is always completely blank. I have tried Safe Mode and restore last known good etc but neither works both same result, get to wallpaper but no icons.
View 2 Replies
View Related
Dec 9, 2007
Hallo. Time going by, I have noticed I have installed quite some applications on my computer.I have Win XP SP2, Intel Pentium4 CPU - 2.8 GHz, 1 GB RAM (SSD), ATI Radeon X300 Series. I notice that booting is taking really long after I select my user account and I hear a lot of hard disk activity. I believe this can be because virtual RAM is activated, but, before going to buy some extra RAM (and SSD memories are not so cheap), I wondered if I could have fixed the issue through some start up software, or some better organisation of the user accounts (e.g. one account for gaming, one for video processing) so that only the requested processes would be loaded each time.
View 6 Replies
View Related
Aug 31, 2005
Let assume that, in a disk we have 3-partition 1. in C: drive Windows 98 (FAT32), we install it first.2. in D: drive Windows 2003 Adv Server (NTFS), this was install 2nd.3. and, E: drive is FAT32, under Windows 98(FAT32)Now, all it works fine as dual boot, we will have menu at startup, there we can select the OS. Right.Now, if we install Windows 2000 Pro in C: Drive by means of format and install option. Windows 2000 is working fine. But we can�t able to load Windows 2003 Adv server, when we select that in the boot select menu.
View 1 Replies
View Related
Aug 3, 2005
I open Windows Explorer from Start button>Right Click.Sometime, I would like to select multiple folders in the Win Explorer while holding Ctrl or Shift Key.It never worked. While selecting next folder, the first folder always becomes unselected.
View 4 Replies
View Related
Jun 17, 2005
Is there anyway to see the BIOS boot order (1st CD, 2nd Floppy, 3rd HDD) through windows XP (possibly a registry key or something)? I ask because I need to make sure all of the computers in my department are set to HDD first and not CD incase they have a non-bootable CD in the drive and a power outage (or Windows Update) causes a reboot.don't want to goto every computer, and would like to do this all remotely.
View 2 Replies
View Related
May 15, 2006
My pc was running fine when it just started beeping like a warning klaxon. Rebooting didn't help, but rebooting into safe mode then normal mode did. Then 1 hour later while running spysweeper, I stopped the scan early because it was taking too long. It detected 1 adware and 1 trojan, but the log said the trojan (ruin) could not be quarantined and some threat was still in memory, despite a problem free pc except for the beeping which I thot was resolved. After exiting spysweeper
my pc locked up and could not be turned off manually, so I unplugged the cord in back. Then I got a blue screen after it tried rebooting. The bootup started normally, but then a blue screen read as follows, more or less-If this is the first time you are seeing this message reboot your pc. Otherwise check for viruses, remove any new hard drives or hard drive controllers. or refer to your startup manual. I can't even boot in safe mode.
View 1 Replies
View Related
Dec 5, 2007
I run a windows 2000 server.
I have recently had problems with it causing me to reinstall. here
I tried to use COMDO firewall and antivirus
I seletced to do some thing it wanted to do at boot as well, but i slected to restaet later.
A few mins later it had shutitself down, and now when it boots, It gets to the 'loading microsoft 2000 server' screen, the bar gets just ver half way..and then it rebots.
View 6 Replies
View Related
Jun 26, 2010
I have inherited an old compaq s6220wm without HDD from a friend. Whenever I attempt to boot windows XP from a tested and working HDD, I am given the screen with the option for safemode, regularboot, etc. After selecting a boot option, the PC will start the boot process, and then a few seconds reboot, without any error message. Insterestingly, I can boot just fine with the LiveCD into Linux.
View 5 Replies
View Related
Jun 7, 2006
Using XP Home Edition. For awhile it has been popping up Windows-No Disk "There is no disk in the drive. Please insert disk into drive." When I cancel, it pops up again anything from 3-8 times. I keep it on all the time. The last two mornings I have found the computer shut down. When I boot it up, it said, "Windows has recovered from a serious error." After sign-in, still having popups No Disk. Have checked disk, defragged, and am doing a clean disk. Any ideas on what this is or how to get rid of the message?
View 11 Replies
View Related
Oct 16, 2010
This pc is normally running on windows xppro sp2. when i tried to upgrade to winxp sp3, the pc works well on the initial installation procedure. But after the first reboot during installation process,it won't go through the windows environment, but instead repeats what it started.But if I try to take out the installation disk of windows, it seems that it was not installed with windows.No system files being copied.
View 1 Replies
View Related
May 1, 2005
Woke up this morning and thought I'd do some work - one problem, computer doesn't work.I turn it on and all is well through POST up until it's time for windows to do it's thing. I get the windows XP (SP2) loader screen with it's lovely blue bar beneath the writing and then after that screen disappears it reboots. Every time I try, even in safe mode, alst known good configuration and indeed on my second windos installation (on a different partiton).
View 12 Replies
View Related
Jul 6, 2005
I am trying to set the boot device for a thinkpad T23. Nothing is password protected. When the BIOS setup CDROM is top, with no + next to it, and followed by hardrive and them removable. HD and removable does have a + next to it. CD is bootable, why won't the thinkpad boot from the CDROM?
View 2 Replies
View Related
May 27, 2006
Does anyone know how to bring up the option to boot from HDD1, HDD2, Floppy etc during the post or slightly after post?I know how to do it on DELL machines. Shift+F12. Well some of them, I won't claim I've used all Dell Systems..I'm running WinXPHome on an Asus MOBO.I've done it before, quite by accident I assure you.But since then I cannot duplicate the feature.BTW: I am not talking about booting into safemode, or the command prompt. This is the start-up menu, correct?
View 14 Replies
View Related
Aug 12, 2009
A friend of mine just got updates from Microsoft and then had to reboot...upon rebooting her system, she was told there was NO BOOT DEVICE AVAILABLE.She has the Dell Vostro 200 series, running WinXP. I had her go into the bios and her HD is the first device in the BOOT ORDER. What else can I try to correct this issue and what would have caused the WIN UPDATE to prevent the computer from booting up?
View 6 Replies
View Related
Jan 12, 2008
After a failed ubuntu install on my dell 4700 i restarted my computer to read the message"no boot device availale press f1 to retry"and im unable to boot manually, my guess is that i accidentally formated it.trying to boot off the disc with windows xp install on it gets the same message, due to my somewhat broken drive.what do i do...and i cant install ubuntu either.
View 2 Replies
View Related
Mar 29, 2006
I have been working on a computer I have tested ram hd and so on but it still will not install windows after first reboot for windows setup it comes up with a blue screen error "Non Mountable boot volume"
View 10 Replies
View Related
Jun 27, 2005
i have my mother-in-laws 2kpro system that stopped booting last week with a blue screen stop error. chkdisk fixed some security descriptor problems, and i it has worked fine until today. w2kpro splash screen appears, status bar fills up, and the disk continues to chatter for a few seconds then bammmm... hard reboot. everytime. No safe mode/or safe mode command prompt.
ran wd diag on the HD it returned error 0223, which it said it fixed. chkdsk then fixed errors. So i thought i might be good to go. But still the hard reboot at the same point in the boot process. I deleted an old iomega driver, iomdisk.sys that seemed to be causing problems and that didn't help. Could this be a driver problem? any logs i can check via recovery console? Bad hardware? I sure would appreciate any help. I follow directions well and can even "rtfm" if necessary!
View 7 Replies
View Related
May 7, 2010
I have a Windows XP PC dedicated to a machine that is constantly sending data via a serial port to the PC. When we power up the system the PC will sometimes think that the serial data coming in is a "new device" and installs it as a serial mouse. When the boot process is complete the PC runs a program from the Startup folder. When this program tries to open the serial port it is blocked by the "serial mouse" it thinks is there.
We have tried many things to prevent this problem. Disabling the mouse in Device Manager works for a while but eventually XP decides there is something wrong and does things like disable the COM port. We have tried disabling the Plug N Play services using MSCONFIG. This does not seem to prevent the detection of the "serial mouse" on boot up. We have a fixed set of hardware and software for this system that will never change. So I'd like to just disable all (or serial) device discovery on boot up. How is this done on XP?
View 1 Replies
View Related
Nov 13, 2009
Okay every time i start my pc i get this error. I insert my gigabyte system cd with gives me option to backup or reboot.Back up = error dont have enough hard disk space reboot = nothing the same error as in the title
View 1 Replies
View Related
Mar 18, 2006
I have been experiencing intermittent bootup problems with Windows XP. When this happens, the XP splash screen appears(blue line scrolling) and then monitor loses signal and reboot occurs. This can cycle several times, even if I choose the option of starting Windows with last known configuration that worked.
View 1 Replies
View Related
Oct 15, 2008
after removing and reformating HD,I put HD back in my Compaq Evo D500 and it won't get past the initial recognization of the floppy drive.The floppy indicator light remains ON,and I can't seem to go beyond Strike F1 any ideas on what went wrong?I checked the connections and the memory sticks to see they were all seated right,but it doesn't count up the memory in the upper left corner at this point I'm lost!
View 3 Replies
View Related
Jul 20, 2005
I have been suffering through a weird phenomenon lately. Whenever I go to IE the first time of any boot or reboot, it "hangs" after filling up the status bar for several minutes, then releases and all is well. (NOTE: I don't think this is IE-specific. It has happened booting apps, but I notice it most with IE as I use it extensively.) When things seem to lock up, EVERYTHING is locked up. I can't even bring up Task Manager, none of the icons in the Task Bar are active, etc. Sometimes I can Tab through other apps that are open, sometimes not, but when I can, the app is "frozen" until whatever is going on finishes. During this time, I can watch the process light (I have a Dell D600 laptop) going nuts. Before and after this event, I have run the system through the latest updates of utilities such as Ad-Aware Plus, Ad-Watch, PestPatrol, Symantec Antivirus, Ace Utilities, RegSeeker, etc., and none of them sends up a flag that anything is wrong.
My machine is always up-to-date via Windows Update feature, so I don't know what is causing this. I had the bright idea to reinstall XP SP2, but can't. Every time I try, it quits, giving me nothing more than a smal window with a red X in it and the notification that the install has been cancelled. I ordered the free XPSP2 CD just to see if that would make any difference, but I get the same error. I suspect I could attempt a slipstream install, but I don't want to go through all that if anyone out there recognizes this problem and knows what the solution is outside of doing a slipstream reinstall of SP2. Finally, I have several times done System Restores going back as far as I can, but while they have been successful (although I usually have to do the restore in Safe Mode as they will often fail otherwise), it has made no difference related to this problem.
View 14 Replies
View Related
Sep 8, 2009
Yesterday and all day today every time that I boot my system I get a pop up saying: Attempting Boot from USB Device Non-system disk or disk error replace and press any key when ready. I can log on my system by pressing F9 and the options that I have are
CD-ROM
USB Device
Hard Drive
the Hard Drive is the only one that lets me log on my system, the other choices only take me back to the same pop up message.
View 11 Replies
View Related
Oct 7, 2007
I have read for the last 2 days and still can't find solution. 1) I don't have any computer knowledge 2) I have win 2000 pro do not know much else about system except it was built by a friend quit awile ago 3)stop error 0x000007b (0x8168e7do,0xc0000032,0x00000000,0x00000000) Inaccessible_Boot_Device. 4) No new hardware has been installed. 5)I was on the net my system frooze up I powered off then on and BANG Blue Screen
View 2 Replies
View Related
